The board keeps restarting, instead of the website only "sorry" appears #220
Comments
|
Copy the files in the "data" directory to SPIFFS. |
|
I did everything according to this tutorial: https://randomnerdtutorials.com/esp32-vs-code-platformio-spiffs/ Processing esp32 (platform: espressif32; board: esp32doit-devkit-v1; framework: arduino)
and next: Processing esp32 (platform: espressif32; board: esp32doit-devkit-v1; framework: arduino)
Leaving... |
|
Unfortunately, nothing has changed: rst:0xc (SW_CPU_RESET),boot:0x13 (SPI_FAST_FLASH_BOOT) Starting ESP32-radio running on CPU 1 at 240 MHz. Core 1 register dump: Backtrace: 0x400edf58:0x3ffcee30 0x400d88e5:0x3ffcee50 0x400da1c8:0x3ffcee70 0x400f2269:0x3ffcee90 #0 0x400edf58:0x3ffcee30 in VS1053::setVolume(unsigned char) at lib/codecs/src/VS1053.cpp:216 ELF file SHA256: 9ab732facf8772cc E (15505) esp_core_dump_flash: Core dump flash config is corrupted! CRC=0x7bd5c66f instead of 0x0 |
|
I repeated this process once again, but now before pressing "Upload Filesystem Image" I selected the "Program Size" option. |
I am unable to access the website because the board keeps restarting. I tried different ESP32 modules, tested with and without a connected display and decoder - the effect is the same:
ets Jul 29 2019 12:21:46
rst:0xc (SW_CPU_RESET),boot:0x13 (SPI_FAST_FLASH_BOOT)
configsip: 0, SPIWP:0xee
clk_drv:0x00,q_drv:0x00,d_drv:0x00,cs0_drv:0x00,hd_drv:0x00,wp_drv:0x00
mode:DIO, clock div:2
load:0x3fff0030,len:1184
load:0x40078000,len:13232
load:0x40080400,len:3028
entry 0x400805e4
E (516) esp_core_dump_flash: No core dump f�ѥѥ���found!
E (516) esp_core_dump_flash: No core dump partition found!
[ 8][D][esp32-hal-cpu.c:244] setCpuFrequencyMhz(): PLL: 480 / 2 = 240 Mhz, APB: 80000000 Hz
Starting ESP32-radio running on CPU 1 at 240 MHz.
[ 3025][I][main.cpp:2582] setup(): [main] Version Thu, 14 Dec 2023 09:00:00 GMT. Free memory 110580
[ 3027][I][main.cpp:2583] setup(): [main] Display type is ILI9341
[ 3123][I][main.cpp:2593] setup(): [main] SPIFFS is okay, space 1016801, used 0
[ 3196][I][main.cpp:2614] setup(): [main] Found partition 'nvs ' at offset 0x009000 with size 20480
[ 3196][I][main.cpp:2614] setup(): [main] Found partition 'otadata ' at offset 0x00E000 with size 8192
[ 3204][I][main.cpp:2614] setup(): [main] Found partition 'spiffs ' at offset 0x2F0000 with size 1114112
[ 3216][I][main.cpp:2486] fillkeylist(): [main] Read 0 keys from NVS
[ 3220][I][main.cpp:1910] readIOprefs(): [main] pin_spi_sck set to 18
[ 3226][I][main.cpp:1910] readIOprefs(): [main] pin_spi_miso set to 19
[ 3232][I][main.cpp:1910] readIOprefs(): [main] pin_spi_mosi set to 23
[ 3249][I][main.cpp:2655] setup(): [main] GPIO0 is HIGH
[ 3259][I][main.cpp:2655] setup(): [main] GPIO2 is HIGH
[ 3269][I][main.cpp:2655] setup(): [main] GPIO4 is HIGH
[ 3279][I][main.cpp:2655] setup(): [main] GPIO5 is HIGH
[ 3289][I][main.cpp:2655] setup(): [main] GPIO12 is HIGH
[ 3299][I][main.cpp:2655] setup(): [main] GPIO13 is HIGH
[ 3309][I][main.cpp:2655] setup(): [main] GPIO14 is HIGH
[ 3319][I][main.cpp:2655] setup(): [main] GPIO15 is HIGH
[ 3329][I][main.cpp:2655] setup(): [main] GPIO16 is HIGH
[ 3339][I][main.cpp:2655] setup(): [main] GPIO17 is HIGH
[ 3349][I][main.cpp:2655] setup(): [main] GPIO18 is HIGH
[ 3359][I][main.cpp:2655] setup(): [main] GPIO19 is HIGH
[ 3369][I][main.cpp:2655] setup(): [main] GPIO21 is HIGH
[ 3379][I][main.cpp:2655] setup(): [main] GPIO22 is HIGH
[ 3389][I][main.cpp:2655] setup(): [main] GPIO23 is HIGH
[ 3399][I][main.cpp:2655] setup(): [main] GPIO25 is HIGH
[ 3409][I][main.cpp:2655] setup(): [main] GPIO26 is HIGH
[ 3419][I][main.cpp:2655] setup(): [main] GPIO27 is HIGH
[ 3429][I][main.cpp:2655] setup(): [main] GPIO32 is HIGH
[ 3439][I][main.cpp:2655] setup(): [main] GPIO33 is HIGH
[ 3449][I][main.cpp:2655] setup(): [main] GPIO34 is LOW, probably no PULL-UP
[ 3459][I][main.cpp:2655] setup(): [main] GPIO35 is HIGH
[ 3469][I][main.cpp:2655] setup(): [main] GPIO39 is LOW, probably no PULL-UP
[ 3471][I][main.cpp:2672] setup(): [main] Start ILI9341 display
[ 3472][E][main.cpp:2689] setup(): [main] Display not activated
[ 3476][I][main.cpp:2278] mk_lsan(): [main] Create list with acceptable WiFi networks
[ 3484][I][WiFiMulti.cpp:84] addAP(): [WIFI][APlistAdd] add SSID: siatka
[ 3491][I][main.cpp:2308] mk_lsan(): [main] Added siatka to list of networks
[ 4014][D][WiFiGeneric.cpp:1035] _eventCallback(): Arduino Event: 0 - WIFI_READY
[ 4112][V][WiFiGeneric.cpp:340] _arduino_event_cb(): STA Started
[ 4112][D][WiFiGeneric.cpp:1035] _eventCallback(): Arduino Event: 2 - STA_START
[ 4611][I][main.cpp:865] listNetworks(): [main] Scan Networks
[ 10826][V][WiFiGeneric.cpp:383] _arduino_event_cb(): SCAN Done: ID: 128, Status: 0, Results: 7
[ 10826][D][WiFiGeneric.cpp:1035] _eventCallback(): Arduino Event: 1 - SCAN_DONE
[ 10831][I][main.cpp:867] listNetworks(): [main] Scan completed
[ 10836][I][main.cpp:875] listNetworks(): [main] Number of available networks: 7
[ 10843][I][main.cpp:893] listNetworks(): [main] 1 - ArabicaGuest Signal: -56 dBm, Encryption WPA_WPA2_PSK, Not accepttable
[ 10855][I][main.cpp:893] listNetworks(): [main] 2 - ARABICA2GHZ Signal: -56 dBm, Encryption WPA2_PSK, Not accepttable
[ 10867][I][main.cpp:893] listNetworks(): [main] 3 - G6_5308 Signal: -72 dBm, Encryption WPA2_PSK, Not accepttable
[ 10879][I][main.cpp:893] listNetworks(): [main] 4 - sieciunia Signal: -77 dBm, Encryption WPA2_PSK, Not accepttable
[ 10891][I][main.cpp:893] listNetworks(): [main] 5 - c96MQcTF Signal: -77 dBm, Encryption WPA2_PSK, Not accepttable
[ 10902][I][main.cpp:893] listNetworks(): [main] 6 - siatka Signal: -79 dBm, Encryption WPA2_PSK, Acceptable
[ 10914][I][main.cpp:893] listNetworks(): [main] 7 - NETIASPOT-87EF10 Signal: -82 dBm, Encryption WPA_WPA2_PSK, Not accepttable
[ 10926][I][main.cpp:897] listNetworks(): [main] End of list
[ 10931][I][main.cpp:2717] setup(): [main] Connect to network
[ 10938][V][WiFiGeneric.cpp:343] _arduino_event_cb(): STA Stopped
[ 10942][D][WiFiGeneric.cpp:1035] _eventCallback(): Arduino Event: 3 - STA_STOP
[ 11948][D][WiFiGeneric.cpp:1035] _eventCallback(): Arduino Event: 0 - WIFI_READY
[ 11952][V][WiFiGeneric.cpp:340] _arduino_event_cb(): STA Started
[ 11952][D][WiFiGeneric.cpp:1035] _eventCallback(): Arduino Event: 2 - STA_START
[ 12953][V][WiFiGeneric.cpp:97] set_esp_interface_ip(): Configuring Station static IP: 0.0.0.0, MASK: 0.0.0.0, GW: 0.0.0.0
[ 12959][I][main.cpp:1605] connectwifi(): [main] Try WiFi siatka
[ 14028][V][WiFiGeneric.cpp:355] _arduino_event_cb(): STA Connected: SSID: siatka, BSSID: 08:31:a4:8b:55:af, Channel: 5, Auth: WPA2_PSK
[ 14029][D][WiFiGeneric.cpp:1035] _eventCallback(): Arduino Event: 4 - STA_CONNECTED
[ 14082][V][WiFiGeneric.cpp:369] _arduino_event_cb(): STA Got New IP:10.0.0.167
[ 14083][D][WiFiGeneric.cpp:1035] _eventCallback(): Arduino Event: 7 - STA_GOT_IP
[ 14086][D][WiFiGeneric.cpp:1098] _eventCallback(): STA IP: 10.0.0.167, MASK: 255.255.255.0, GW: 10.0.0.2
[ 14160][I][main.cpp:1638] connectwifi(): [main] SSID = siatka
[ 14160][I][main.cpp:1642] connectwifi(): [main] IP = 10.0.0.167
[ 14160][I][main.cpp:2727] setup(): [main] Start web server
[ 14166][I][main.cpp:2737] setup(): [main] Network found. Starting clients
[ 14175][I][main.cpp:2771] setup(): [main] MDNS responder started
[ 15180][I][main.cpp:2816] setup(): [main] Rotary encoder is disabled (-1/-1/-1)
[ 15181][I][main.cpp:4372] gettime(): [main] Sync TOD
[ 15181][I][main.cpp:4385] gettime(): [main] TOD synced
[ 15288][E][main.cpp:749] nvsgetstr(): [main] nvs_get_str failed 1102 for key preset, keylen is 6, len is 150!
[ 15288][E][main.cpp:750] nvsgetstr(): [main] Contents:
[ 15292][I][main.cpp:966] nextPreset(): [main] nextPreset is 0
[ 15297][I][main.cpp:3403] radiofuncs(): [main] Radiofuncs cmd is 1
[ 15304][I][main.cpp:1400] connecttohost(): [main] Connect to host
[ 15309][E][AsyncTCP.cpp:729] connect(): error: -16
[ 15314][E][main.cpp:1472] connecttohost(): [main] Request failed!
Guru Meditation Error: Core 1 panic'ed (LoadProhibited). Exception was unhandled.
Core 1 register dump:
PC : 0x400edf5b PS : 0x00060d30 A0 : 0x800d88e8 A1 : 0x3ffcee30
A2 : 0x00000000 A3 : 0x00000000 A4 : 0xc4490906 A5 : 0x3ffcee10
A6 : 0x3ffcee10 A7 : 0x00000080 A8 : 0x800d645c A9 : 0x3ffc60dc
A10 : 0x3ffcebc8 A11 : 0x00000004 A12 : 0x3f400124 A13 : 0x000005c0
A14 : 0x3f401e86 A15 : 0x3f401f25 SAR : 0x0000001b EXCCAUSE: 0x0000001c
EXCVADDR: 0x00000009 LBEG : 0x4008bb95 LEND : 0x4008bba5 LCOUNT : 0xffffffff
Backtrace: 0x400edf58:0x3ffcee30 0x400d88e5:0x3ffcee50 0x400da1c8:0x3ffcee70 0x400f2269:0x3ffcee90
ELF file SHA256: 960efa8f48f0d366
E (15553) esp_core_dump_flash: Core dump flash config is corrupted! CRC=0x7bd5c66f instead of 0x0
Rebooting...
ets Jul 29 2019 12:21:46
The text was updated successfully, but these errors were encountered: