MXC-CEC: Return writable for poll when no link status. #1

dougnazar · 2017-07-24T05:49:33Z

I was having an issue using the new driver when the HDMI cable wasn't connected where libcec would hang during init. The current libplatform has no timeout for the select loop during writes and would never return. I originally wanted to return POLLERR when there was no link but then I got hangs while reading since it's blocking and we don't fail reads if there is no link (didn't look to see if that's possible).

Minimal fix seems to notify of writable state while there is no link and then let the write fail.

If there is no link we need to allow writes otherwise libcec will block on select() in the SocketWrite() call. The write() will still fail with EAGAIN. Signed-off-by: Doug Nazar <nazard@nazar.ca>

warped-rudi · 2017-07-29T08:25:20Z

Thanks for contributing!

Upstream-commit: d73e172 John Stultz reports a boot time crash with the HiKey board (which uses hci_serdev) occurring in hci_uart_tx_wakeup(). That function is contained in hci_ldisc.c, but also called from the newer hci_serdev.c. It acquires the proto_lock in struct hci_uart and it turns out that we forgot to init the lock in the serdev code path, thus causing the crash. John bisected the crash to commit 67d2f87 ("Bluetooth: hci_ldisc: Allow sleeping while proto locks are held"), but the issue was present before and the commit merely exposed it. (Perhaps by luck, the crash did not occur with rwlocks.) Init the proto_lock in the serdev code path to avoid the oops. Stack trace for posterity: Unable to handle kernel read from unreadable memory at 406f127000 [000000406f127000] user address but active_mm is swapper Internal error: Oops: 96000005 [#1] PREEMPT SMP Hardware name: HiKey Development Board (DT) Call trace: hci_uart_tx_wakeup+0x38/0x148 hci_uart_send_frame+0x28/0x38 hci_send_frame+0x64/0xc0 hci_cmd_work+0x98/0x110 process_one_work+0x134/0x330 worker_thread+0x130/0x468 kthread+0xf8/0x128 ret_from_fork+0x10/0x18 Link: https://lkml.org/lkml/2017/11/15/908 Reported-and-tested-by: John Stultz <john.stultz@linaro.org> Cc: Ronald Tschalär <ronald@innovation.ch> Cc: Rob Herring <rob.herring@linaro.org> Cc: Sumit Semwal <sumit.semwal@linaro.org> Signed-off-by: Lukas Wunner <lukas@wunner.de> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>

commit 7bf7a71 upstream. When the tuner was split from m88rs2000 the attach function is in wrong place. Move to dm04_lme2510_tuner to trap errors on failure and removing a call to lme_coldreset. Prevents driver starting up without any tuner connected. Fixes to trap for ts2020 fail. LME2510(C): FE Found M88RS2000 ts2020: probe of 0-0060 failed with error -11 ... LME2510(C): TUN Found RS2000 tuner kasan: CONFIG_KASAN_INLINE enabled kasan: GPF could be caused by NULL-ptr deref or user memory access general protection fault: 0000 [#1] PREEMPT SMP KASAN Reported-by: Andrey Konovalov <andreyknvl@google.com> Signed-off-by: Malcolm Priestley <tvboxspy@gmail.com> Tested-by: Andrey Konovalov <andreyknvl@google.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com> Cc: Ben Hutchings <ben.hutchings@codethink.co.uk> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

commit ff26cc1 upstream. If we can't get inode lock immediately in the function ocfs2_inode_lock_with_page() when reading a page, we should not return directly here, since this will lead to a softlockup problem when the kernel is configured with CONFIG_PREEMPT is not set. The method is to get a blocking lock and immediately unlock before returning, this can avoid CPU resource waste due to lots of retries, and benefits fairness in getting lock among multiple nodes, increase efficiency in case modifying the same file frequently from multiple nodes. The softlockup crash (when set /proc/sys/kernel/softlockup_panic to 1) looks like: Kernel panic - not syncing: softlockup: hung tasks CPU: 0 PID: 885 Comm: multi_mmap Tainted: G L 4.12.14-6.1-default #1 Hardware name: Bochs Bochs, BIOS Bochs 01/01/2011 Call Trace: <IRQ> dump_stack+0x5c/0x82 panic+0xd5/0x21e watchdog_timer_fn+0x208/0x210 __hrtimer_run_queues+0xcc/0x200 hrtimer_interrupt+0xa6/0x1f0 smp_apic_timer_interrupt+0x34/0x50 apic_timer_interrupt+0x96/0xa0 </IRQ> RIP: 0010:unlock_page+0x17/0x30 RSP: 0000:ffffaf154080bc88 EFLAGS: 00000246 ORIG_RAX: ffffffffffffff10 RAX: dead000000000100 RBX: fffff21e009f5300 RCX: 0000000000000004 RDX: dead0000000000ff RSI: 0000000000000202 RDI: fffff21e009f5300 RBP: 0000000000000000 R08: 0000000000000000 R09: ffffaf154080bb00 R10: ffffaf154080bc30 R11: 0000000000000040 R12: ffff993749a39518 R13: 0000000000000000 R14: fffff21e009f5300 R15: fffff21e009f5300 ocfs2_inode_lock_with_page+0x25/0x30 [ocfs2] ocfs2_readpage+0x41/0x2d0 [ocfs2] filemap_fault+0x12b/0x5c0 ocfs2_fault+0x29/0xb0 [ocfs2] __do_fault+0x1a/0xa0 __handle_mm_fault+0xbe8/0x1090 handle_mm_fault+0xaa/0x1f0 __do_page_fault+0x235/0x4b0 trace_do_page_fault+0x3c/0x110 async_page_fault+0x28/0x30 RIP: 0033:0x7fa75ded638e RSP: 002b:00007ffd6657db18 EFLAGS: 00010287 RAX: 000055c7662fb700 RBX: 0000000000000001 RCX: 000055c7662fb700 RDX: 0000000000001770 RSI: 00007fa75e909000 RDI: 000055c7662fb700 RBP: 0000000000000003 R08: 000000000000000e R09: 0000000000000000 R10: 0000000000000483 R11: 00007fa75ded61b0 R12: 00007fa75e90a770 R13: 000000000000000e R14: 0000000000001770 R15: 0000000000000000 About performance improvement, we can see the testing time is reduced, and CPU utilization decreases, the detailed data is as follows. I ran multi_mmap test case in ocfs2-test package in a three nodes cluster. Before applying this patch: PID USER PR NI VIRT RES SHR S %CPU %MEM TIME+ COMMAND 2754 ocfs2te+ 20 0 170248 6980 4856 D 80.73 0.341 0:18.71 multi_mmap 1505 root rt 0 222236 123060 97224 S 2.658 6.015 0:01.44 corosync 5 root 20 0 0 0 0 S 1.329 0.000 0:00.19 kworker/u8:0 95 root 20 0 0 0 0 S 1.329 0.000 0:00.25 kworker/u8:1 2728 root 20 0 0 0 0 S 0.997 0.000 0:00.24 jbd2/sda1-33 2721 root 20 0 0 0 0 S 0.664 0.000 0:00.07 ocfs2dc-3C8CFD4 2750 ocfs2te+ 20 0 142976 4652 3532 S 0.664 0.227 0:00.28 mpirun ocfs2test@tb-node2:~>multiple_run.sh -i ens3 -k ~/linux-4.4.21-69.tar.gz -o ~/ocfs2mullog -C hacluster -s pcmk -n tb-node2,tb-node1,tb-node3 -d /dev/sda1 -b 4096 -c 32768 -t multi_mmap /mnt/shared Tests with "-b 4096 -C 32768" Thu Dec 28 14:44:52 CST 2017 multi_mmap..................................................Passed. Runtime 783 seconds. After apply this patch: PID USER PR NI VIRT RES SHR S %CPU %MEM TIME+ COMMAND 2508 ocfs2te+ 20 0 170248 6804 4680 R 54.00 0.333 0:55.37 multi_mmap 155 root 20 0 0 0 0 S 2.667 0.000 0:01.20 kworker/u8:3 95 root 20 0 0 0 0 S 2.000 0.000 0:01.58 kworker/u8:1 2504 ocfs2te+ 20 0 142976 4604 3480 R 1.667 0.225 0:01.65 mpirun 5 root 20 0 0 0 0 S 1.000 0.000 0:01.36 kworker/u8:0 2482 root 20 0 0 0 0 S 1.000 0.000 0:00.86 jbd2/sda1-33 299 root 0 -20 0 0 0 S 0.333 0.000 0:00.13 kworker/2:1H 335 root 0 -20 0 0 0 S 0.333 0.000 0:00.17 kworker/1:1H 535 root 20 0 12140 7268 1456 S 0.333 0.355 0:00.34 haveged 1282 root rt 0 222284 123108 97224 S 0.333 6.017 0:01.33 corosync ocfs2test@tb-node2:~>multiple_run.sh -i ens3 -k ~/linux-4.4.21-69.tar.gz -o ~/ocfs2mullog -C hacluster -s pcmk -n tb-node2,tb-node1,tb-node3 -d /dev/sda1 -b 4096 -c 32768 -t multi_mmap /mnt/shared Tests with "-b 4096 -C 32768" Thu Dec 28 15:04:12 CST 2017 multi_mmap..................................................Passed. Runtime 487 seconds. Link: http://lkml.kernel.org/r/1514447305-30814-1-git-send-email-ghe@suse.com Fixes: 1cce4df ("ocfs2: do not lock/unlock() inode DLM lock") Signed-off-by: Gang He <ghe@suse.com> Reviewed-by: Eric Ren <zren@suse.com> Acked-by: alex chen <alex.chen@huawei.com> Acked-by: piaojun <piaojun@huawei.com> Cc: Mark Fasheh <mfasheh@versity.com> Cc: Joel Becker <jlbec@evilplan.org> Cc: Junxiao Bi <junxiao.bi@oracle.com> Cc: Joseph Qi <jiangqi903@gmail.com> Cc: Changwei Ge <ge.changwei@h3c.com> Cc: <stable@vger.kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

…iled. commit bb422a7 upstream. Syzbot caught an oops at unregister_shrinker() because combination of commit 1d3d443 ("vmscan: per-node deferred work") and fault injection made register_shrinker() fail and the caller of register_shrinker() did not check for failure. ---------- [ 554.881422] FAULT_INJECTION: forcing a failure. [ 554.881422] name failslab, interval 1, probability 0, space 0, times 0 [ 554.881438] CPU: 1 PID: 13231 Comm: syz-executor1 Not tainted 4.14.0-rc8+ Freescale#82 [ 554.881443] Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/01/2011 [ 554.881445] Call Trace: [ 554.881459] dump_stack+0x194/0x257 [ 554.881474] ? arch_local_irq_restore+0x53/0x53 [ 554.881486] ? find_held_lock+0x35/0x1d0 [ 554.881507] should_fail+0x8c0/0xa40 [ 554.881522] ? fault_create_debugfs_attr+0x1f0/0x1f0 [ 554.881537] ? check_noncircular+0x20/0x20 [ 554.881546] ? find_next_zero_bit+0x2c/0x40 [ 554.881560] ? ida_get_new_above+0x421/0x9d0 [ 554.881577] ? find_held_lock+0x35/0x1d0 [ 554.881594] ? __lock_is_held+0xb6/0x140 [ 554.881628] ? check_same_owner+0x320/0x320 [ 554.881634] ? lock_downgrade+0x990/0x990 [ 554.881649] ? find_held_lock+0x35/0x1d0 [ 554.881672] should_failslab+0xec/0x120 [ 554.881684] __kmalloc+0x63/0x760 [ 554.881692] ? lock_downgrade+0x990/0x990 [ 554.881712] ? register_shrinker+0x10e/0x2d0 [ 554.881721] ? trace_event_raw_event_module_request+0x320/0x320 [ 554.881737] register_shrinker+0x10e/0x2d0 [ 554.881747] ? prepare_kswapd_sleep+0x1f0/0x1f0 [ 554.881755] ? _down_write_nest_lock+0x120/0x120 [ 554.881765] ? memcpy+0x45/0x50 [ 554.881785] sget_userns+0xbcd/0xe20 (...snipped...) [ 554.898693] kasan: CONFIG_KASAN_INLINE enabled [ 554.898724] kasan: GPF could be caused by NULL-ptr deref or user memory access [ 554.898732] general protection fault: 0000 [#1] SMP KASAN [ 554.898737] Dumping ftrace buffer: [ 554.898741] (ftrace buffer empty) [ 554.898743] Modules linked in: [ 554.898752] CPU: 1 PID: 13231 Comm: syz-executor1 Not tainted 4.14.0-rc8+ Freescale#82 [ 554.898755] Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/01/2011 [ 554.898760] task: ffff8801d1dbe5c0 task.stack: ffff8801c9e38000 [ 554.898772] RIP: 0010:__list_del_entry_valid+0x7e/0x150 [ 554.898775] RSP: 0018:ffff8801c9e3f108 EFLAGS: 00010246 [ 554.898780] RAX: dffffc0000000000 RBX: 0000000000000000 RCX: 0000000000000000 [ 554.898784] RDX: 0000000000000000 RSI: ffff8801c53c6f98 RDI: ffff8801c53c6fa0 [ 554.898788] RBP: ffff8801c9e3f120 R08: 1ffff100393c7d55 R09: 0000000000000004 [ 554.898791] R10: ffff8801c9e3ef70 R11: 0000000000000000 R12: 0000000000000000 [ 554.898795] R13: dffffc0000000000 R14: 1ffff100393c7e45 R15: ffff8801c53c6f98 [ 554.898800] FS: 0000000000000000(0000) GS:ffff8801db300000(0000) knlGS:0000000000000000 [ 554.898804] CS: 0010 DS: 002b ES: 002b CR0: 0000000080050033 [ 554.898807] CR2: 00000000dbc23000 CR3: 00000001c7269000 CR4: 00000000001406e0 [ 554.898813] DR0: 0000000020000000 DR1: 0000000020000000 DR2: 0000000000000000 [ 554.898816] DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000600 [ 554.898818] Call Trace: [ 554.898828] unregister_shrinker+0x79/0x300 [ 554.898837] ? perf_trace_mm_vmscan_writepage+0x750/0x750 [ 554.898844] ? down_write+0x87/0x120 [ 554.898851] ? deactivate_super+0x139/0x1b0 [ 554.898857] ? down_read+0x150/0x150 [ 554.898864] ? check_same_owner+0x320/0x320 [ 554.898875] deactivate_locked_super+0x64/0xd0 [ 554.898883] deactivate_super+0x141/0x1b0 ---------- Since allowing register_shrinker() callers to call unregister_shrinker() when register_shrinker() failed can simplify error recovery path, this patch makes unregister_shrinker() no-op when register_shrinker() failed. Also, reset shrinker->nr_deferred in case unregister_shrinker() was by error called twice. Signed-off-by: Tetsuo Handa <penguin-kernel@I-love.SAKURA.ne.jp> Signed-off-by: Aliaksei Karaliou <akaraliou.dev@gmail.com> Reported-by: syzbot <syzkaller@googlegroups.com> Cc: Glauber Costa <glauber@scylladb.com> Cc: Al Viro <viro@zeniv.linux.org.uk> Signed-off-by: Al Viro <viro@zeniv.linux.org.uk> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

commit 3f34cfa upstream. Syzbot reported several deadlocks in the netfilter area caused by rtnl lock and socket lock being acquired with a different order on different code paths, leading to backtraces like the following one: ====================================================== WARNING: possible circular locking dependency detected 4.15.0-rc9+ Freescale#212 Not tainted ------------------------------------------------------ syzkaller041579/3682 is trying to acquire lock: (sk_lock-AF_INET6){+.+.}, at: [<000000008775e4dd>] lock_sock include/net/sock.h:1463 [inline] (sk_lock-AF_INET6){+.+.}, at: [<000000008775e4dd>] do_ipv6_setsockopt.isra.8+0x3c5/0x39d0 net/ipv6/ipv6_sockglue.c:167 but task is already holding lock: (rtnl_mutex){+.+.}, at: [<000000004342eaa9>] rtnl_lock+0x17/0x20 net/core/rtnetlink.c:74 which lock already depends on the new lock. the existing dependency chain (in reverse order) is: -> #1 (rtnl_mutex){+.+.}: __mutex_lock_common kernel/locking/mutex.c:756 [inline] __mutex_lock+0x16f/0x1a80 kernel/locking/mutex.c:893 mutex_lock_nested+0x16/0x20 kernel/locking/mutex.c:908 rtnl_lock+0x17/0x20 net/core/rtnetlink.c:74 register_netdevice_notifier+0xad/0x860 net/core/dev.c:1607 tee_tg_check+0x1a0/0x280 net/netfilter/xt_TEE.c:106 xt_check_target+0x22c/0x7d0 net/netfilter/x_tables.c:845 check_target net/ipv6/netfilter/ip6_tables.c:538 [inline] find_check_entry.isra.7+0x935/0xcf0 net/ipv6/netfilter/ip6_tables.c:580 translate_table+0xf52/0x1690 net/ipv6/netfilter/ip6_tables.c:749 do_replace net/ipv6/netfilter/ip6_tables.c:1165 [inline] do_ip6t_set_ctl+0x370/0x5f0 net/ipv6/netfilter/ip6_tables.c:1691 nf_sockopt net/netfilter/nf_sockopt.c:106 [inline] nf_setsockopt+0x67/0xc0 net/netfilter/nf_sockopt.c:115 ipv6_setsockopt+0x115/0x150 net/ipv6/ipv6_sockglue.c:928 udpv6_setsockopt+0x45/0x80 net/ipv6/udp.c:1422 sock_common_setsockopt+0x95/0xd0 net/core/sock.c:2978 SYSC_setsockopt net/socket.c:1849 [inline] SyS_setsockopt+0x189/0x360 net/socket.c:1828 entry_SYSCALL_64_fastpath+0x29/0xa0 -> #0 (sk_lock-AF_INET6){+.+.}: lock_acquire+0x1d5/0x580 kernel/locking/lockdep.c:3914 lock_sock_nested+0xc2/0x110 net/core/sock.c:2780 lock_sock include/net/sock.h:1463 [inline] do_ipv6_setsockopt.isra.8+0x3c5/0x39d0 net/ipv6/ipv6_sockglue.c:167 ipv6_setsockopt+0xd7/0x150 net/ipv6/ipv6_sockglue.c:922 udpv6_setsockopt+0x45/0x80 net/ipv6/udp.c:1422 sock_common_setsockopt+0x95/0xd0 net/core/sock.c:2978 SYSC_setsockopt net/socket.c:1849 [inline] SyS_setsockopt+0x189/0x360 net/socket.c:1828 entry_SYSCALL_64_fastpath+0x29/0xa0 other info that might help us debug this: Possible unsafe locking scenario: CPU0 CPU1 ---- ---- lock(rtnl_mutex); lock(sk_lock-AF_INET6); lock(rtnl_mutex); lock(sk_lock-AF_INET6); *** DEADLOCK *** 1 lock held by syzkaller041579/3682: #0: (rtnl_mutex){+.+.}, at: [<000000004342eaa9>] rtnl_lock+0x17/0x20 net/core/rtnetlink.c:74 The problem, as Florian noted, is that nf_setsockopt() is always called with the socket held, even if the lock itself is required only for very tight scopes and only for some operation. This patch addresses the issues moving the lock_sock() call only where really needed, namely in ipv*_getorigdst(), so that nf_setsockopt() does not need anymore to acquire both locks. Fixes: 22265a5 ("netfilter: xt_TEE: resolve oif using netdevice notifiers") Reported-by: syzbot+a4c2dc980ac1af699b36@syzkaller.appspotmail.com Suggested-by: Florian Westphal <fw@strlen.de> Signed-off-by: Paolo Abeni <pabeni@redhat.com> Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

commit 87a81dc upstream. Performing the hash of an empty file leads to a kernel Oops [ 44.504600] Unable to handle kernel paging request for data at address 0x0000000c [ 44.512819] Faulting instruction address: 0xc02d2be8 [ 44.524088] Oops: Kernel access of bad area, sig: 11 [#1] [ 44.529171] BE PREEMPT CMPC885 [ 44.532232] CPU: 0 PID: 491 Comm: md5sum Not tainted 4.15.0-rc8-00211-g3a968610b6ea Freescale#81 [ 44.540814] NIP: c02d2be8 LR: c02d2984 CTR: 00000000 [ 44.545812] REGS: c6813c90 TRAP: 0300 Not tainted (4.15.0-rc8-00211-g3a968610b6ea) [ 44.554223] MSR: 00009032 <EE,ME,IR,DR,RI> CR: 48222822 XER: 20000000 [ 44.560855] DAR: 0000000c DSISR: c0000000 [ 44.560855] GPR00: c02d28fc c6813d40 c6828000 c646fa40 00000001 00000001 00000001 00000000 [ 44.560855] GPR08: 0000004c 00000000 c000bfcc 00000000 28222822 100280d4 00000000 10020008 [ 44.560855] GPR16: 00000000 00000020 00000000 00000000 10024008 00000000 c646f9f0 c6179a10 [ 44.560855] GPR24: 00000000 00000001 c62f0018 c6179a10 00000000 c6367a30 c62f0000 c646f9c0 [ 44.598542] NIP [c02d2be8] ahash_process_req+0x448/0x700 [ 44.603751] LR [c02d2984] ahash_process_req+0x1e4/0x700 [ 44.608868] Call Trace: [ 44.611329] [c6813d40] [c02d28fc] ahash_process_req+0x15c/0x700 (unreliable) [ 44.618302] [c6813d90] [c02060c4] hash_recvmsg+0x11c/0x210 [ 44.623716] [c6813db0] [c0331354] ___sys_recvmsg+0x98/0x138 [ 44.629226] [c6813eb0] [c03332c0] __sys_recvmsg+0x40/0x84 [ 44.634562] [c6813f10] [c03336c0] SyS_socketcall+0xb8/0x1d4 [ 44.640073] [c6813f40] [c000d1ac] ret_from_syscall+0x0/0x38 [ 44.645530] Instruction dump: [ 44.648465] 38c00001 7f63db78 4e800421 7c791b78 54690ffe 0f090000 80ff0190 2f870000 [ 44.656122] 40befe50 2f990001 409e0210 813f01bc <8129000c> b39e003a 7d29c214 913e003c This patch fixes that Oops by checking if src is NULL. Fixes: 6a1e8d1 ("crypto: talitos - making mapping helpers more generic") Cc: <stable@vger.kernel.org> Signed-off-by: Christophe Leroy <christophe.leroy@c-s.fr> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

commit f027e0b upstream. The adis_probe_trigger() creates a new IIO trigger and requests an interrupt associated with the trigger. The interrupt uses the generic iio_trigger_generic_data_rdy_poll() function as its interrupt handler. Currently the driver initializes some fields of the trigger structure after the interrupt has been requested. But an interrupt can fire as soon as it has been requested. This opens up a race condition. iio_trigger_generic_data_rdy_poll() will access the trigger data structure and dereference the ops field. If the ops field is not yet initialized this will result in a NULL pointer deref. It is not expected that the device generates an interrupt at this point, so typically this issue did not surface unless e.g. due to a hardware misconfiguration (wrong interrupt number, wrong polarity, etc.). But some newer devices from the ADIS family start to generate periodic interrupts in their power-on reset configuration and unfortunately the interrupt can not be masked in the device. This makes the race condition much more visible and the following crash has been observed occasionally when booting a system using the ADIS16460. Unable to handle kernel NULL pointer dereference at virtual address 00000008 pgd = c0004000 [00000008] *pgd=00000000 Internal error: Oops: 5 [#1] PREEMPT SMP ARM Modules linked in: CPU: 0 PID: 1 Comm: swapper/0 Not tainted 4.9.0-04126-gf9739f0-dirty Freescale#257 Hardware name: Xilinx Zynq Platform task: ef04f640 task.stack: ef050000 PC is at iio_trigger_notify_done+0x30/0x68 LR is at iio_trigger_generic_data_rdy_poll+0x18/0x20 pc : [<c042d868>] lr : [<c042d924>] psr: 60000193 sp : ef051bb8 ip : 00000000 fp : ef106400 r10: c081d80a r9 : ef3bfa00 r8 : 00000087 r7 : ef051bec r6 : 00000000 r5 : ef3bfa00 r4 : ee92ab00 r3 : 00000000 r2 : 00000000 r1 : 00000000 r0 : ee97e400 Flags: nZCv IRQs off FIQs on Mode SVC_32 ISA ARM Segment none Control: 18c5387d Table: 0000404a DAC: 00000051 Process swapper/0 (pid: 1, stack limit = 0xef050210) [<c042d868>] (iio_trigger_notify_done) from [<c0065b10>] (__handle_irq_event_percpu+0x88/0x118) [<c0065b10>] (__handle_irq_event_percpu) from [<c0065bbc>] (handle_irq_event_percpu+0x1c/0x58) [<c0065bbc>] (handle_irq_event_percpu) from [<c0065c30>] (handle_irq_event+0x38/0x5c) [<c0065c30>] (handle_irq_event) from [<c0068e28>] (handle_level_irq+0xa4/0x130) [<c0068e28>] (handle_level_irq) from [<c0064e74>] (generic_handle_irq+0x24/0x34) [<c0064e74>] (generic_handle_irq) from [<c021ab7c>] (zynq_gpio_irqhandler+0xb8/0x13c) [<c021ab7c>] (zynq_gpio_irqhandler) from [<c0064e74>] (generic_handle_irq+0x24/0x34) [<c0064e74>] (generic_handle_irq) from [<c0065370>] (__handle_domain_irq+0x5c/0xb4) [<c0065370>] (__handle_domain_irq) from [<c000940c>] (gic_handle_irq+0x48/0x8c) [<c000940c>] (gic_handle_irq) from [<c0013e8c>] (__irq_svc+0x6c/0xa8) To fix this make sure that the trigger is fully initialized before requesting the interrupt. Fixes: ccd2b52 ("staging:iio: Add common ADIS library") Reported-by: Robin Getz <Robin.Getz@analog.com> Signed-off-by: Lars-Peter Clausen <lars@metafoo.de> Cc: <Stable@vger.kernel.org> Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

[ Upstream commit 642a843 ] Calling tipc_mon_delete() before the monitor has been created will oops. This can happen in tipc_enable_bearer() error path if tipc_disc_create() fails. [ 48.589074] BUG: unable to handle kernel paging request at 0000000000001008 [ 48.590266] IP: tipc_mon_delete+0xea/0x270 [tipc] [ 48.591223] PGD 1e60c5067 P4D 1e60c5067 PUD 1eb0cf067 PMD 0 [ 48.592230] Oops: 0000 [#1] SMP KASAN [ 48.595610] CPU: 5 PID: 1199 Comm: tipc Tainted: G B 4.15.0-rc4-pc64-dirty SolidRun#5 [ 48.597176] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.10.2-2.fc27 04/01/2014 [ 48.598489] RIP: 0010:tipc_mon_delete+0xea/0x270 [tipc] [ 48.599347] RSP: 0018:ffff8801d827f668 EFLAGS: 00010282 [ 48.600705] RAX: ffff8801ee813f00 RBX: 0000000000000204 RCX: 0000000000000000 [ 48.602183] RDX: 1ffffffff1de6a75 RSI: 0000000000000297 RDI: 0000000000000297 [ 48.604373] RBP: 0000000000000000 R08: 0000000000000000 R09: fffffbfff1dd1533 [ 48.605607] R10: ffffffff8eafbb05 R11: fffffbfff1dd1534 R12: 0000000000000050 [ 48.607082] R13: dead000000000200 R14: ffffffff8e73f310 R15: 0000000000001020 [ 48.608228] FS: 00007fc686484800(0000) GS:ffff8801f5540000(0000) knlGS:0000000000000000 [ 48.610189] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 48.611459] CR2: 0000000000001008 CR3: 00000001dda70002 CR4: 00000000003606e0 [ 48.612759] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 [ 48.613831] DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 [ 48.615038] Call Trace: [ 48.615635] tipc_enable_bearer+0x415/0x5e0 [tipc] [ 48.620623] tipc_nl_bearer_enable+0x1ab/0x200 [tipc] [ 48.625118] genl_family_rcv_msg+0x36b/0x570 [ 48.631233] genl_rcv_msg+0x5a/0xa0 [ 48.631867] netlink_rcv_skb+0x1cc/0x220 [ 48.636373] genl_rcv+0x24/0x40 [ 48.637306] netlink_unicast+0x29c/0x350 [ 48.639664] netlink_sendmsg+0x439/0x590 [ 48.642014] SYSC_sendto+0x199/0x250 [ 48.649912] do_syscall_64+0xfd/0x2c0 [ 48.650651] entry_SYSCALL64_slow_path+0x25/0x25 [ 48.651843] RIP: 0033:0x7fc6859848e3 [ 48.652539] RSP: 002b:00007ffd25dff938 EFLAGS: 00000246 ORIG_RAX: 000000000000002c [ 48.654003] RAX: ffffffffffffffda RBX: 00007ffd25dff990 RCX: 00007fc6859848e3 [ 48.655303] RDX: 0000000000000054 RSI: 00007ffd25dff990 RDI: 0000000000000003 [ 48.656512] RBP: 00007ffd25dff980 R08: 00007fc685c35fc0 R09: 000000000000000c [ 48.657697] R10: 0000000000000000 R11: 0000000000000246 R12: 0000000000d13010 [ 48.658840] R13: 00007ffd25e009c0 R14: 0000000000000000 R15: 0000000000000000 [ 48.662972] RIP: tipc_mon_delete+0xea/0x270 [tipc] RSP: ffff8801d827f668 [ 48.664073] CR2: 0000000000001008 [ 48.664576] ---[ end trace e811818d54d5ce88 ]--- Acked-by: Ying Xue <ying.xue@windriver.com> Acked-by: Jon Maloy <jon.maloy@ericsson.com> Signed-off-by: Tommi Rantala <tommi.t.rantala@nokia.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Sasha Levin <alexander.levin@microsoft.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

[ Upstream commit 0b76aae ] This patch adds check so that driver does not disable already disabled device. [ 44.637743] advantechwdt: Unexpected close, not stopping watchdog! [ 44.997548] input: ImExPS/2 Generic Explorer Mouse as /devices/platform/i8042/serio1/input/input6 [ 45.013419] e1000 0000:00:03.0: disabling already-disabled device [ 45.013447] ------------[ cut here ]------------ [ 45.014868] WARNING: CPU: 1 PID: 71 at drivers/pci/pci.c:1641 pci_disable_device+0xa1/0x105: pci_disable_device at drivers/pci/pci.c:1640 [ 45.016171] CPU: 1 PID: 71 Comm: rcu_perf_shutdo Not tainted 4.14.0-01330-g3c07399 #1 [ 45.017197] task: ffff88011bee9e40 task.stack: ffffc90000860000 [ 45.017987] RIP: 0010:pci_disable_device+0xa1/0x105: pci_disable_device at drivers/pci/pci.c:1640 [ 45.018603] RSP: 0000:ffffc90000863e30 EFLAGS: 00010286 [ 45.019282] RAX: 0000000000000035 RBX: ffff88013a230008 RCX: 0000000000000000 [ 45.020182] RDX: 0000000000000000 RSI: 0000000000000000 RDI: 0000000000000203 [ 45.021084] RBP: ffff88013a3f31e8 R08: 0000000000000001 R09: 0000000000000000 [ 45.021986] R10: ffffffff827ec29c R11: 0000000000000002 R12: 0000000000000001 [ 45.022946] R13: ffff88013a230008 R14: ffff880117802b20 R15: ffffc90000863e8f [ 45.023842] FS: 0000000000000000(0000) GS:ffff88013fd00000(0000) knlGS:0000000000000000 [ 45.024863] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 45.025583] CR2: ffffc900006d4000 CR3: 000000000220f000 CR4: 00000000000006a0 [ 45.026478] Call Trace: [ 45.026811] __e1000_shutdown+0x1d4/0x1e2: __e1000_shutdown at drivers/net/ethernet/intel/e1000/e1000_main.c:5162 [ 45.027344] ? rcu_perf_cleanup+0x2a1/0x2a1: rcu_perf_shutdown at kernel/rcu/rcuperf.c:627 [ 45.027883] e1000_shutdown+0x14/0x3a: e1000_shutdown at drivers/net/ethernet/intel/e1000/e1000_main.c:5235 [ 45.028351] device_shutdown+0x110/0x1aa: device_shutdown at drivers/base/core.c:2807 [ 45.028858] kernel_power_off+0x31/0x64: kernel_power_off at kernel/reboot.c:260 [ 45.029343] rcu_perf_shutdown+0x9b/0xa7: rcu_perf_shutdown at kernel/rcu/rcuperf.c:637 [ 45.029852] ? __wake_up_common_lock+0xa2/0xa2: autoremove_wake_function at kernel/sched/wait.c:376 [ 45.030414] kthread+0x126/0x12e: kthread at kernel/kthread.c:233 [ 45.030834] ? __kthread_bind_mask+0x8e/0x8e: kthread at kernel/kthread.c:190 [ 45.031399] ? ret_from_fork+0x1f/0x30: ret_from_fork at arch/x86/entry/entry_64.S:443 [ 45.031883] ? kernel_init+0xa/0xf5: kernel_init at init/main.c:997 [ 45.032325] ret_from_fork+0x1f/0x30: ret_from_fork at arch/x86/entry/entry_64.S:443 [ 45.032777] Code: 00 48 85 ed 75 07 48 8b ab a8 00 00 00 48 8d bb 98 00 00 00 e8 aa d1 11 00 48 89 ea 48 89 c6 48 c7 c7 d8 e4 0b 82 e8 55 7d da ff <0f> ff b9 01 00 00 00 31 d2 be 01 00 00 00 48 c7 c7 f0 b1 61 82 [ 45.035222] ---[ end trace c257137b1b1976ef ]--- [ 45.037838] ACPI: Preparing to enter system sleep state S5 Signed-off-by: Tushar Dave <tushar.n.dave@oracle.com> Tested-by: Fengguang Wu <fengguang.wu@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com> Signed-off-by: Sasha Levin <alexander.levin@microsoft.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

commit b9c97c6 upstream. If m88d3103 chip ID is not recognized, the device is not initialized. However, it returns from probe without any error, causing this OOPS: [ 7.689289] Unable to handle kernel NULL pointer dereference at virtual address 00000000 [ 7.689297] pgd = 7b0bd7a7 [ 7.689302] [00000000] *pgd=00000000 [ 7.689318] Internal error: Oops: 80000005 [#1] SMP ARM [ 7.689322] Modules linked in: dvb_usb_dvbsky(+) m88ds3103 dvb_usb_v2 dvb_core videobuf2_vmalloc videobuf2_memops videobuf2_core crc32_arm_ce videodev media [ 7.689358] CPU: 3 PID: 197 Comm: systemd-udevd Not tainted 4.15.0-mcc+ SolidRun#23 [ 7.689361] Hardware name: BCM2835 [ 7.689367] PC is at 0x0 [ 7.689382] LR is at m88ds3103_attach+0x194/0x1d0 [m88ds3103] [ 7.689386] pc : [<00000000>] lr : [<bf0ae1ec>] psr: 60000013 [ 7.689391] sp : ed8e5c20 ip : ed8c1e00 fp : ed8945c0 [ 7.689395] r10: ed894000 r9 : ed894378 r8 : eda736c0 [ 7.689400] r7 : ed894070 r6 : ed8e5c44 r5 : bf0bb040 r4 : eda77600 [ 7.689405] r3 : 00000000 r2 : 00000000 r1 : 00000000 r0 : eda77600 [ 7.689412] Flags: nZCv IRQs on FIQs on Mode SVC_32 ISA ARM Segment none [ 7.689417] Control: 10c5383d Table: 2d8e806a DAC: 00000051 [ 7.689423] Process systemd-udevd (pid: 197, stack limit = 0xe9dbfb63) [ 7.689428] Stack: (0xed8e5c20 to 0xed8e6000) [ 7.689439] 5c20: ed853a80 eda73640 ed894000 ed8942c0 ed853a80 bf0b9e98 ed894070 bf0b9f10 [ 7.689449] 5c40: 00000000 00000000 bf08c17c c08dfc50 00000000 00000000 00000000 00000000 [ 7.689459] 5c60: 00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000 [ 7.689468] 5c80: 00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000 [ 7.689479] 5ca0: 00000000 00000000 ed8945c0 ed8942c0 ed894000 ed894830 bf0b9e98 00000000 [ 7.689490] 5cc0: ed894378 bf0a3cb4 bf0bc3b0 0000533b ed920540 00000000 00000034 bf0a6434 [ 7.689500] 5ce0: ee952070 ed826600 bf0a7038 bf0a2dd8 00000001 bf0a6768 bf0a2f90 ed8943c0 [ 7.689511] 5d00: 00000000 c08eca68 ed826620 ed826620 00000000 ee952070 bf0bc034 ee952000 [ 7.689521] 5d20: ed826600 bf0bb080 ffffffed c0aa9e9c c0aa9dac ed826620 c16edf6c c168c2c8 [ 7.689531] 5d40: c16edf70 00000000 bf0bc034 0000000d 00000000 c08e268c bf0bb080 ed826600 [ 7.689541] 5d60: bf0bc034 ed826654 ed826620 bf0bc034 c164c8bc 00000000 00000001 00000000 [ 7.689553] 5d80: 00000028 c08e2948 00000000 bf0bc034 c08e2848 c08e0778 ee9f0a58 ed88bab4 [ 7.689563] 5da0: bf0bc034 ed90ba80 c168c1f0 c08e1934 bf0bb3bc c17045ac bf0bc034 c164c8bc [ 7.689574] 5dc0: bf0bc034 bf0bb3bc ed91f564 c08e34ec bf0bc000 c164c8bc bf0bc034 c0aa8dc4 [ 7.689584] 5de0: ffffe000 00000000 bf0bf000 ed91f600 ed91f564 c03021e4 00000001 00000000 [ 7.689595] 5e00: c166e040 8040003f ed853a80 bf0bc448 00000000 c1678174 ed853a80 f0f22000 [ 7.689605] 5e20: f0f21fff 8040003f 014000c0 ed91e700 ed91e700 c16d8e68 00000001 ed91e6c0 [ 7.689615] 5e40: bf0bc400 00000001 bf0bc400 ed91f564 00000001 00000000 00000028 c03c9a24 [ 7.689625] 5e60: 00000001 c03c8c94 ed8e5f50 ed8e5f50 00000001 bf0bc400 ed91f540 c03c8cb0 [ 7.689637] 5e80: bf0bc40c 00007fff bf0bc400 c03c60b0 00000000 bf0bc448 00000028 c0e09684 [ 7.689647] 5ea0: 00000002 bf0bc530 c1234bf8 bf0bc5dc bf0bc514 c10ebbe8 ffffe000 bf000000 [ 7.689657] 5ec0: 00011538 00000000 ed8e5f48 00000000 00000000 00000000 00000000 00000000 [ 7.689666] 5ee0: 00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000 [ 7.689676] 5f00: 00000000 00000000 7fffffff 00000000 00000013 b6e55a18 0000017b c0309104 [ 7.689686] 5f20: ed8e4000 00000000 00510af0 c03c9430 7fffffff 00000000 00000003 00000000 [ 7.689697] 5f40: 00000000 f0f0f000 00011538 00000000 f0f107b0 f0f0f000 00011538 f0f1fdb8 [ 7.689707] 5f60: f0f1fbe8 f0f1b974 00004000 000041e0 bf0bc3d0 00000001 00000000 000024c4 [ 7.689717] 5f80: 0000002d 0000002e 00000019 00000000 00000010 00000000 16894000 00000000 [ 7.689727] 5fa0: 00000000 c0308f20 16894000 00000000 00000013 b6e55a18 00000000 b6e5652c [ 7.689737] 5fc0: 16894000 00000000 00000000 0000017b 00020000 00508110 00000000 00510af0 [ 7.689748] 5fe0: bef68948 bef68938 b6e4d3d0 b6d32590 60000010 00000013 00000000 00000000 [ 7.689790] [<bf0ae1ec>] (m88ds3103_attach [m88ds3103]) from [<bf0b9f10>] (dvbsky_s960c_attach+0x78/0x280 [dvb_usb_dvbsky]) [ 7.689821] [<bf0b9f10>] (dvbsky_s960c_attach [dvb_usb_dvbsky]) from [<bf0a3cb4>] (dvb_usbv2_probe+0xa3c/0x1024 [dvb_usb_v2]) [ 7.689849] [<bf0a3cb4>] (dvb_usbv2_probe [dvb_usb_v2]) from [<c0aa9e9c>] (usb_probe_interface+0xf0/0x2a8) [ 7.689869] [<c0aa9e9c>] (usb_probe_interface) from [<c08e268c>] (driver_probe_device+0x2f8/0x4b4) [ 7.689881] [<c08e268c>] (driver_probe_device) from [<c08e2948>] (__driver_attach+0x100/0x11c) [ 7.689895] [<c08e2948>] (__driver_attach) from [<c08e0778>] (bus_for_each_dev+0x4c/0x9c) [ 7.689909] [<c08e0778>] (bus_for_each_dev) from [<c08e1934>] (bus_add_driver+0x1c0/0x264) [ 7.689919] [<c08e1934>] (bus_add_driver) from [<c08e34ec>] (driver_register+0x78/0xf4) [ 7.689931] [<c08e34ec>] (driver_register) from [<c0aa8dc4>] (usb_register_driver+0x70/0x134) [ 7.689946] [<c0aa8dc4>] (usb_register_driver) from [<c03021e4>] (do_one_initcall+0x44/0x168) [ 7.689963] [<c03021e4>] (do_one_initcall) from [<c03c9a24>] (do_init_module+0x64/0x1f4) [ 7.689979] [<c03c9a24>] (do_init_module) from [<c03c8cb0>] (load_module+0x20a0/0x25c8) [ 7.689993] [<c03c8cb0>] (load_module) from [<c03c9430>] (SyS_finit_module+0xb4/0xec) [ 7.690007] [<c03c9430>] (SyS_finit_module) from [<c0308f20>] (ret_fast_syscall+0x0/0x54) [ 7.690018] Code: bad PC value This may happen on normal circumstances, if, for some reason, the demod hangs and start returning an invalid chip ID: [ 10.394395] m88ds3103 3-0068: Unknown device. Chip_id=00 So, change the logic to cause probe to fail with -ENODEV, preventing the OOPS. Detected while testing DVB MMAP patches on Raspberry Pi 3 with DVBSky S960CI. Cc: stable@vger.kernel.org Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

commit b28676b upstream. Reported by syzkaller: pte_list_remove: ffff9714eb1f8078 0->BUG ------------[ cut here ]------------ kernel BUG at arch/x86/kvm/mmu.c:1157! invalid opcode: 0000 [#1] SMP RIP: 0010:pte_list_remove+0x11b/0x120 [kvm] Call Trace: drop_spte+0x83/0xb0 [kvm] mmu_page_zap_pte+0xcc/0xe0 [kvm] kvm_mmu_prepare_zap_page+0x81/0x4a0 [kvm] kvm_mmu_invalidate_zap_all_pages+0x159/0x220 [kvm] kvm_arch_flush_shadow_all+0xe/0x10 [kvm] kvm_mmu_notifier_release+0x6c/0xa0 [kvm] ? kvm_mmu_notifier_release+0x5/0xa0 [kvm] __mmu_notifier_release+0x79/0x110 ? __mmu_notifier_release+0x5/0x110 exit_mmap+0x15a/0x170 ? do_exit+0x281/0xcb0 mmput+0x66/0x160 do_exit+0x2c9/0xcb0 ? __context_tracking_exit.part.5+0x4a/0x150 do_group_exit+0x50/0xd0 SyS_exit_group+0x14/0x20 do_syscall_64+0x73/0x1f0 entry_SYSCALL64_slow_path+0x25/0x25 The reason is that when creates new memslot, there is no guarantee for new memslot not overlap with private memslots. This can be triggered by the following program: #include <fcntl.h> #include <pthread.h> #include <setjmp.h> #include <signal.h> #include <stddef.h> #include <stdint.h> #include <stdio.h> #include <stdlib.h> #include <string.h> #include <sys/ioctl.h> #include <sys/stat.h> #include <sys/syscall.h> #include <sys/types.h> #include <unistd.h> #include <linux/kvm.h> long r[16]; int main() { void *p = valloc(0x4000); r[2] = open("/dev/kvm", 0); r[3] = ioctl(r[2], KVM_CREATE_VM, 0x0ul); uint64_t addr = 0xf000; ioctl(r[3], KVM_SET_IDENTITY_MAP_ADDR, &addr); r[6] = ioctl(r[3], KVM_CREATE_VCPU, 0x0ul); ioctl(r[3], KVM_SET_TSS_ADDR, 0x0ul); ioctl(r[6], KVM_RUN, 0); ioctl(r[6], KVM_RUN, 0); struct kvm_userspace_memory_region mr = { .slot = 0, .flags = KVM_MEM_LOG_DIRTY_PAGES, .guest_phys_addr = 0xf000, .memory_size = 0x4000, .userspace_addr = (uintptr_t) p }; ioctl(r[3], KVM_SET_USER_MEMORY_REGION, &mr); return 0; } This patch fixes the bug by not adding a new memslot even if it overlaps with private memslots. Reported-by: Dmitry Vyukov <dvyukov@google.com> Cc: Paolo Bonzini <pbonzini@redhat.com> Cc: Radim Krčmář <rkrcmar@redhat.com> Cc: Dmitry Vyukov <dvyukov@google.com> Cc: Eric Biggers <ebiggers3@gmail.com> Cc: stable@vger.kernel.org Signed-off-by: Wanpeng Li <wanpeng.li@hotmail.com>

[ upstream commit 16338a9 ] I recently noticed a crash on arm64 when feeding a bogus index into BPF tail call helper. The crash would not occur when the interpreter is used, but only in case of JIT. Output looks as follows: [ 347.007486] Unable to handle kernel paging request at virtual address fffb850e96492510 [...] [ 347.043065] [fffb850e96492510] address between user and kernel address ranges [ 347.050205] Internal error: Oops: 96000004 [#1] SMP [...] [ 347.190829] x13: 0000000000000000 x12: 0000000000000000 [ 347.196128] x11: fffc047ebe782800 x10: ffff808fd7d0fd10 [ 347.201427] x9 : 0000000000000000 x8 : 0000000000000000 [ 347.206726] x7 : 0000000000000000 x6 : 001c991738000000 [ 347.212025] x5 : 0000000000000018 x4 : 000000000000ba5a [ 347.217325] x3 : 00000000000329c4 x2 : ffff808fd7cf0500 [ 347.222625] x1 : ffff808fd7d0fc00 x0 : ffff808fd7cf0500 [ 347.227926] Process test_verifier (pid: 4548, stack limit = 0x000000007467fa61) [ 347.235221] Call trace: [ 347.237656] 0xffff000002f3a4fc [ 347.240784] bpf_test_run+0x78/0xf8 [ 347.244260] bpf_prog_test_run_skb+0x148/0x230 [ 347.248694] SyS_bpf+0x77c/0x1110 [ 347.251999] el0_svc_naked+0x30/0x34 [ 347.255564] Code: 9100075a d280220a 8b0a002a d37df04b (f86b694b) [...] In this case the index used in BPF r3 is the same as in r1 at the time of the call, meaning we fed a pointer as index; here, it had the value 0xffff808fd7cf0500 which sits in x2. While I found tail calls to be working in general (also for hitting the error cases), I noticed the following in the code emission: # bpftool p d j i 988 [...] 38: ldr w10, [x1,x10] 3c: cmp w2, w10 40: b.ge 0x000000000000007c <-- signed cmp 44: mov x10, #0x20 // SolidRun#32 48: cmp x26, x10 4c: b.gt 0x000000000000007c 50: add x26, x26, #0x1 54: mov x10, #0x110 // Freescale#272 58: add x10, x1, x10 5c: lsl x11, x2, SolidRun#3 60: ldr x11, [x10,x11] <-- faulting insn (f86b694b) 64: cbz x11, 0x000000000000007c [...] Meaning, the tests passed because commit ddb5599 ("arm64: bpf: implement bpf_tail_call() helper") was using signed compares instead of unsigned which as a result had the test wrongly passing. Change this but also the tail call count test both into unsigned and cap the index as u32. Latter we did as well in 90caccd ("bpf: fix bpf_tail_call() x64 JIT") and is needed in addition here, too. Tested on HiSilicon Hi1616. Result after patch: # bpftool p d j i 268 [...] 38: ldr w10, [x1,x10] 3c: add w2, w2, #0x0 40: cmp w2, w10 44: b.cs 0x0000000000000080 48: mov x10, #0x20 // SolidRun#32 4c: cmp x26, x10 50: b.hi 0x0000000000000080 54: add x26, x26, #0x1 58: mov x10, #0x110 // Freescale#272 5c: add x10, x1, x10 60: lsl x11, x2, SolidRun#3 64: ldr x11, [x10,x11] 68: cbz x11, 0x0000000000000080 [...] Fixes: ddb5599 ("arm64: bpf: implement bpf_tail_call() helper") Signed-off-by: Daniel Borkmann <daniel@iogearbox.net> Signed-off-by: Alexei Starovoitov <ast@kernel.org> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

commit 1041401 upstream. syzbot reported that xt_LED may try to use the ledinternal->timer without previously initializing it: ------------[ cut here ]------------ kernel BUG at kernel/time/timer.c:958! invalid opcode: 0000 [#1] SMP KASAN Dumping ftrace buffer: (ftrace buffer empty) Modules linked in: CPU: 1 PID: 1826 Comm: kworker/1:2 Not tainted 4.15.0+ Freescale#306 Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/01/2011 Workqueue: ipv6_addrconf addrconf_dad_work RIP: 0010:__mod_timer kernel/time/timer.c:958 [inline] RIP: 0010:mod_timer+0x7d6/0x13c0 kernel/time/timer.c:1102 RSP: 0018:ffff8801d24fe9f8 EFLAGS: 00010293 RAX: ffff8801d25246c0 RBX: ffff8801aec6cb50 RCX: ffffffff816052c6 RDX: 0000000000000000 RSI: 00000000fffbd14b RDI: ffff8801aec6cb68 RBP: ffff8801d24fec98 R08: 0000000000000000 R09: 1ffff1003a49fd6c R10: ffff8801d24feb28 R11: 0000000000000005 R12: dffffc0000000000 R13: ffff8801d24fec70 R14: 00000000fffbd14b R15: ffff8801af608f90 FS: 0000000000000000(0000) GS:ffff8801db500000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 00000000206d6fd0 CR3: 0000000006a22001 CR4: 00000000001606e0 DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 Call Trace: led_tg+0x1db/0x2e0 net/netfilter/xt_LED.c:75 ip6t_do_table+0xc2a/0x1a30 net/ipv6/netfilter/ip6_tables.c:365 ip6table_raw_hook+0x65/0x80 net/ipv6/netfilter/ip6table_raw.c:42 nf_hook_entry_hookfn include/linux/netfilter.h:120 [inline] nf_hook_slow+0xba/0x1a0 net/netfilter/core.c:483 nf_hook.constprop.27+0x3f6/0x830 include/linux/netfilter.h:243 NF_HOOK include/linux/netfilter.h:286 [inline] ndisc_send_skb+0xa51/0x1370 net/ipv6/ndisc.c:491 ndisc_send_ns+0x38a/0x870 net/ipv6/ndisc.c:633 addrconf_dad_work+0xb9e/0x1320 net/ipv6/addrconf.c:4008 process_one_work+0xbbf/0x1af0 kernel/workqueue.c:2113 worker_thread+0x223/0x1990 kernel/workqueue.c:2247 kthread+0x33c/0x400 kernel/kthread.c:238 ret_from_fork+0x3a/0x50 arch/x86/entry/entry_64.S:429 Code: 85 2a 0b 00 00 4d 8b 3c 24 4d 85 ff 75 9f 4c 8b bd 60 fd ff ff e8 bb 57 10 00 65 ff 0d 94 9a a1 7e e9 d9 fc ff ff e8 aa 57 10 00 <0f> 0b e8 a3 57 10 00 e9 14 fb ff ff e8 99 57 10 00 4c 89 bd 70 RIP: __mod_timer kernel/time/timer.c:958 [inline] RSP: ffff8801d24fe9f8 RIP: mod_timer+0x7d6/0x13c0 kernel/time/timer.c:1102 RSP: ffff8801d24fe9f8 ---[ end trace f661ab06f5dd8b3d ]--- The ledinternal struct can be shared between several different xt_LED targets, but the related timer is currently initialized only if the first target requires it. Fix it by unconditionally initializing the timer struct. v1 -> v2: call del_timer_sync() unconditionally, too. Fixes: 268cb38 ("netfilter: x_tables: add LED trigger target") Reported-by: syzbot+10c98dc5725c6c8fc7fb@syzkaller.appspotmail.com Signed-off-by: Paolo Abeni <pabeni@redhat.com> Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

commit db57ccf upstream. syzbot reported a division by 0 bug in the netfilter nat code: divide error: 0000 [#1] SMP KASAN Dumping ftrace buffer: (ftrace buffer empty) Modules linked in: CPU: 1 PID: 4168 Comm: syzkaller034710 Not tainted 4.16.0-rc1+ Freescale#309 Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/01/2011 RIP: 0010:nf_nat_l4proto_unique_tuple+0x291/0x530 net/netfilter/nf_nat_proto_common.c:88 RSP: 0018:ffff8801b2466778 EFLAGS: 00010246 RAX: 000000000000f153 RBX: ffff8801b2466dd8 RCX: ffff8801b2466c7c RDX: 0000000000000000 RSI: ffff8801b2466c58 RDI: ffff8801db5293ac RBP: ffff8801b24667d8 R08: ffff8801b8ba6dc0 R09: ffffffff88af5900 R10: ffff8801b24666f0 R11: 0000000000000000 R12: 000000002990f153 R13: 0000000000000001 R14: 0000000000000000 R15: ffff8801b2466c7c FS: 00000000017e3880(0000) GS:ffff8801db500000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 00000000208fdfe4 CR3: 00000001b5340002 CR4: 00000000001606e0 DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 Call Trace: dccp_unique_tuple+0x40/0x50 net/netfilter/nf_nat_proto_dccp.c:30 get_unique_tuple+0xc28/0x1c10 net/netfilter/nf_nat_core.c:362 nf_nat_setup_info+0x1c2/0xe00 net/netfilter/nf_nat_core.c:406 nf_nat_redirect_ipv6+0x306/0x730 net/netfilter/nf_nat_redirect.c:124 redirect_tg6+0x7f/0xb0 net/netfilter/xt_REDIRECT.c:34 ip6t_do_table+0xc2a/0x1a30 net/ipv6/netfilter/ip6_tables.c:365 ip6table_nat_do_chain+0x65/0x80 net/ipv6/netfilter/ip6table_nat.c:41 nf_nat_ipv6_fn+0x594/0xa80 net/ipv6/netfilter/nf_nat_l3proto_ipv6.c:302 nf_nat_ipv6_local_fn+0x33/0x5d0 net/ipv6/netfilter/nf_nat_l3proto_ipv6.c:407 ip6table_nat_local_fn+0x2c/0x40 net/ipv6/netfilter/ip6table_nat.c:69 nf_hook_entry_hookfn include/linux/netfilter.h:120 [inline] nf_hook_slow+0xba/0x1a0 net/netfilter/core.c:483 nf_hook include/linux/netfilter.h:243 [inline] NF_HOOK include/linux/netfilter.h:286 [inline] ip6_xmit+0x10ec/0x2260 net/ipv6/ip6_output.c:277 inet6_csk_xmit+0x2fc/0x580 net/ipv6/inet6_connection_sock.c:139 dccp_transmit_skb+0x9ac/0x10f0 net/dccp/output.c:142 dccp_connect+0x369/0x670 net/dccp/output.c:564 dccp_v6_connect+0xe17/0x1bf0 net/dccp/ipv6.c:946 __inet_stream_connect+0x2d4/0xf00 net/ipv4/af_inet.c:620 inet_stream_connect+0x58/0xa0 net/ipv4/af_inet.c:684 SYSC_connect+0x213/0x4a0 net/socket.c:1639 SyS_connect+0x24/0x30 net/socket.c:1620 do_syscall_64+0x282/0x940 arch/x86/entry/common.c:287 entry_SYSCALL_64_after_hwframe+0x26/0x9b RIP: 0033:0x441c69 RSP: 002b:00007ffe50cc0be8 EFLAGS: 00000217 ORIG_RAX: 000000000000002a RAX: ffffffffffffffda RBX: ffffffffffffffff RCX: 0000000000441c69 RDX: 000000000000001c RSI: 00000000208fdfe4 RDI: 0000000000000003 RBP: 00000000006cc018 R08: 0000000000000000 R09: 0000000000000000 R10: 0000000000000538 R11: 0000000000000217 R12: 0000000000403590 R13: 0000000000403620 R14: 0000000000000000 R15: 0000000000000000 Code: 48 89 f0 83 e0 07 83 c0 01 38 d0 7c 08 84 d2 0f 85 46 02 00 00 48 8b 45 c8 44 0f b7 20 e8 88 97 04 fd 31 d2 41 0f b7 c4 4c 89 f9 <41> f7 f6 48 c1 e9 03 48 b8 00 00 00 00 00 fc ff df 0f b6 0c 01 RIP: nf_nat_l4proto_unique_tuple+0x291/0x530 net/netfilter/nf_nat_proto_common.c:88 RSP: ffff8801b2466778 The problem is that currently we don't have any check on the configured port range. A port range == -1 triggers the bug, while other negative values may require a very long time to complete the following loop. This commit addresses the issue swapping the two ends on negative ranges. The check is performed in nf_nat_l4proto_unique_tuple() since the nft nat loads the port values from nft registers at runtime. v1 -> v2: use the correct 'Fixes' tag v2 -> v3: update commit message, drop unneeded READ_ONCE() Fixes: 5b1158e ("[NETFILTER]: Add NAT support for nf_conntrack") Reported-by: syzbot+8012e198bd037f4871e5@syzkaller.appspotmail.com Signed-off-by: Paolo Abeni <pabeni@redhat.com> Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

commit cb88a05 upstream. Corsair Strafe RGB keyboard does not respond to usb control messages sometimes and hence generates timeouts. Commit de3af5b ("usb: quirks: add delay init quirk for Corsair Strafe RGB keyboard") tried to fix those timeouts by adding USB_QUIRK_DELAY_INIT. Unfortunately, even with this quirk timeouts of usb_control_msg() can still be seen, but with a lower frequency (approx. 1 out of 15): [ 29.103520] usb 1-8: string descriptor 0 read error: -110 [ 34.363097] usb 1-8: can't set config #1, error -110 Adding further delays to different locations where usb control messages are issued just moves the timeouts to other locations, e.g.: [ 35.400533] usbhid 1-8:1.0: can't add hid device: -110 [ 35.401014] usbhid: probe of 1-8:1.0 failed with error -110 The only way to reliably avoid those issues is having a pause after each usb control message. In approx. 200 boot cycles no more timeouts were seen. Addionaly, keep USB_QUIRK_DELAY_INIT as it turned out to be necessary to have the delay in hub_port_connect() after hub_port_init(). The overall boot time seems not to be influenced by these additional delays, even on fast machines and lightweight distributions. Fixes: de3af5b ("usb: quirks: add delay init quirk for Corsair Strafe RGB keyboard") Cc: stable@vger.kernel.org Signed-off-by: Danilo Krummrich <danilokrummrich@dk-develop.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

[ Upstream commit 8610783 ] If fbdev emulation is disabled, the QXL shutdown path will try to clean a framebuffer that wasn't initialized, hitting the Oops below. The problem is that even when FBDEV_EMULATION is disabled we allocate the qfbdev strutucture, but we don't initialize it. The fix is to stop allocating the memory, since it won't be used. This allows the existing verification in the cleanup hook to do it's job preventing the oops. Now that we don't allocate the unused fbdev structure, we need to be careful when dereferencing it in the PM suspend hook. [ 24.284684] BUG: unable to handle kernel NULL pointer dereference at 00000000000002e0 [ 24.285627] IP: mutex_lock+0x18/0x30 [ 24.286049] PGD 78cdf067 [ 24.286050] PUD 7940f067 [ 24.286344] PMD 0 [ 24.286649] [ 24.287072] Oops: 0002 [#1] SMP [ 24.287422] Modules linked in: qxl [ 24.287806] CPU: 0 PID: 2328 Comm: bash Not tainted 4.10.0-rc5+ Freescale#97 [ 24.288515] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.9.3-20161025_171302-gandalf 04/01/2014 [ 24.289681] task: ffff88007c4c0000 task.stack: ffffc90001b58000 [ 24.290354] RIP: 0010:mutex_lock+0x18/0x30 [ 24.290812] RSP: 0018:ffffc90001b5bcb0 EFLAGS: 00010246 [ 24.291401] RAX: 0000000000000000 RBX: 00000000000002e0 RCX: 0000000000000000 [ 24.292209] RDX: ffff88007c4c0000 RSI: 0000000000000001 RDI: 00000000000002e0 [ 24.292987] RBP: ffffc90001b5bcb8 R08: fffffffffffffffe R09: 0000000000000001 [ 24.293797] R10: ffff880078d80b80 R11: 0000000000011400 R12: 0000000000000000 [ 24.294601] R13: 00000000000002e0 R14: ffffffffa0009c28 R15: 0000000000000060 [ 24.295439] FS: 00007f30e3acbb40(0000) GS:ffff88007fc00000(0000) knlGS:0000000000000000 [ 24.296364] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 24.296997] CR2: 00000000000002e0 CR3: 0000000078c7b000 CR4: 00000000000006f0 [ 24.297813] Call Trace: [ 24.298097] drm_framebuffer_cleanup+0x1f/0x70 [ 24.298612] qxl_fbdev_fini+0x68/0x90 [qxl] [ 24.299074] qxl_modeset_fini+0xd/0x30 [qxl] [ 24.299562] qxl_pci_remove+0x22/0x50 [qxl] [ 24.300025] pci_device_remove+0x34/0xb0 [ 24.300507] device_release_driver_internal+0x150/0x200 [ 24.301082] device_release_driver+0xd/0x10 [ 24.301587] unbind_store+0x108/0x150 [ 24.301993] drv_attr_store+0x20/0x30 [ 24.302402] sysfs_kf_write+0x32/0x40 [ 24.302827] kernfs_fop_write+0x108/0x190 [ 24.303269] __vfs_write+0x23/0x120 [ 24.303678] ? security_file_permission+0x36/0xb0 [ 24.304193] ? rw_verify_area+0x49/0xb0 [ 24.304636] vfs_write+0xb0/0x190 [ 24.305004] SyS_write+0x41/0xa0 [ 24.305362] entry_SYSCALL_64_fastpath+0x1a/0xa9 [ 24.305887] RIP: 0033:0x7f30e31d9620 [ 24.306285] RSP: 002b:00007ffc54b47e68 EFLAGS: 00000246 ORIG_RAX: 0000000000000001 [ 24.307128] RAX: ffffffffffffffda RBX: 00007f30e3497600 RCX: 00007f30e31d9620 [ 24.307928] RDX: 000000000000000d RSI: 0000000000da2008 RDI: 0000000000000001 [ 24.308727] RBP: 000000000070bc60 R08: 00007f30e3498760 R09: 00007f30e3acbb40 [ 24.309504] R10: 0000000000000073 R11: 0000000000000246 R12: 0000000000000001 [ 24.310295] R13: 0000000000000000 R14: 0000000000000000 R15: 00007ffc54b47f34 [ 24.311095] Code: 0e 01 e9 7b fe ff ff 66 90 66 2e 0f 1f 84 00 00 00 00 00 55 48 89 e5 53 48 89 fb e8 83 e8 ff ff 65 48 8b 14 25 40 c4 00 00 31 c0 <3e> 48 0f b1 13 48 85 c0 74 08 48 89 df e8 66 fd ff ff 5b 5d c3 [ 24.313182] RIP: mutex_lock+0x18/0x30 RSP: ffffc90001b5bcb0 [ 24.313811] CR2: 00000000000002e0 [ 24.314208] ---[ end trace 29669c1593cae14b ]--- Signed-off-by: Gabriel Krisman Bertazi <krisman@collabora.co.uk> Link: http://patchwork.freedesktop.org/patch/msgid/20170227203330.18542-1-krisman@collabora.co.uk Signed-off-by: Gerd Hoffmann <kraxel@redhat.com> Signed-off-by: Sasha Levin <alexander.levin@microsoft.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

[ Upstream commit fda78d7 ] The pci_bus_type .shutdown method, pci_device_shutdown(), is called from device_shutdown() in the kernel restart and shutdown paths. Previously, pci_device_shutdown() called pci_msi_shutdown() and pci_msix_shutdown(). This disables MSI and MSI-X, which causes the device to fall back to raising interrupts via INTx. But the driver is still bound to the device, it doesn't know about this change, and it likely doesn't have an INTx handler, so these INTx interrupts cause "nobody cared" warnings like this: irq 16: nobody cared (try booting with the "irqpoll" option) CPU: 0 PID: 0 Comm: swapper/0 Not tainted 4.8.2-1.el7_UNSUPPORTED.x86_64 #1 Hardware name: Hewlett-Packard HP Z820 Workstation/158B, BIOS J63 v03.90 06/ ... The MSI disabling code was added by d52877c ("pci/irq: let pci_device_shutdown to call pci_msi_shutdown v2") because a driver left MSI enabled and kdump failed because the kexeced kernel wasn't prepared to receive the MSI interrupts. Subsequent commits 1851617 ("PCI/MSI: Disable MSI at enumeration even if kernel doesn't support MSI") and e80e7ed ("PCI/MSI: Initialize MSI capability for all architectures") changed the kexeced kernel to disable all MSIs itself so it no longer depends on the crashed kernel to clean up after itself. Stop disabling MSI/MSI-X in pci_device_shutdown(). This resolves the "nobody cared" unhandled IRQ issue above. It also allows PCI serial devices, which may rely on the MSI interrupts, to continue outputting messages during reboot/shutdown. [bhelgaas: changelog, drop pci_msi_shutdown() and pci_msix_shutdown() calls altogether] Fixes: https://bugzilla.kernel.org/show_bug.cgi?id=187351 Signed-off-by: Prarit Bhargava <prarit@redhat.com> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> CC: Alex Williamson <alex.williamson@redhat.com> CC: David Arcari <darcari@redhat.com> CC: Myron Stowe <mstowe@redhat.com> CC: Lukas Wunner <lukas@wunner.de> CC: Keith Busch <keith.busch@intel.com> CC: Mika Westerberg <mika.westerberg@linux.intel.com> Signed-off-by: Sasha Levin <alexander.levin@microsoft.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

[ Upstream commit 6e4c848 ] Fixes warning that appears in dmesg after closing V4L2 userspace application that plays video from the display device (first device from V4L2 device nodes provided by solo, usually /dev/video0 when no other V4L2 devices are present). Encoder device nodes are not affected. Can be reproduced by starting and closing ffplay -f video4linux2 /dev/video0 [ 8130.281251] ------------[ cut here ]------------ [ 8130.281256] WARNING: CPU: 1 PID: 20414 at drivers/media/v4l2-core/videobuf2-core.c:1651 __vb2_queue_cancel+0x14b/0x230 [ 8130.281257] Modules linked in: ipt_MASQUERADE nf_nat_masquerade_ipv4 iptable_nat solo6x10 x86_pkg_temp_thermal vboxpci(O) vboxnetadp(O) vboxnetflt(O) vboxdrv(O) [ 8130.281264] CPU: 1 PID: 20414 Comm: ffplay Tainted: G O 4.10.0-gentoo #1 [ 8130.281264] Hardware name: ASUS All Series/B85M-E, BIOS 2301 03/30/2015 [ 8130.281265] Call Trace: [ 8130.281267] dump_stack+0x4f/0x72 [ 8130.281270] __warn+0xc7/0xf0 [ 8130.281271] warn_slowpath_null+0x18/0x20 [ 8130.281272] __vb2_queue_cancel+0x14b/0x230 [ 8130.281273] vb2_core_streamoff+0x23/0x90 [ 8130.281275] vb2_streamoff+0x24/0x50 [ 8130.281276] vb2_ioctl_streamoff+0x3d/0x50 [ 8130.281278] v4l_streamoff+0x15/0x20 [ 8130.281279] __video_do_ioctl+0x25e/0x2f0 [ 8130.281280] video_usercopy+0x279/0x520 [ 8130.281282] ? v4l_enum_fmt+0x1330/0x1330 [ 8130.281285] ? unmap_region+0xdf/0x110 [ 8130.281285] video_ioctl2+0x10/0x20 [ 8130.281286] v4l2_ioctl+0xce/0xe0 [ 8130.281289] do_vfs_ioctl+0x8b/0x5b0 [ 8130.281290] ? __fget+0x72/0xa0 [ 8130.281291] SyS_ioctl+0x74/0x80 [ 8130.281294] entry_SYSCALL_64_fastpath+0x13/0x94 [ 8130.281295] RIP: 0033:0x7ff86fee6b27 [ 8130.281296] RSP: 002b:00007ffe467f6a08 EFLAGS: 00000246 ORIG_RAX: 0000000000000010 [ 8130.281297] RAX: ffffffffffffffda RBX: 00000000d1a4d788 RCX: 00007ff86fee6b27 [ 8130.281297] RDX: 00007ffe467f6a14 RSI: 0000000040045613 RDI: 0000000000000006 [ 8130.281298] RBP: 000000000373f8d0 R08: 00000000ffffffff R09: 00007ff860001140 [ 8130.281298] R10: 0000000000000243 R11: 0000000000000246 R12: 0000000000000000 [ 8130.281299] R13: 00000000000000a0 R14: 00007ffe467f6530 R15: 0000000001f32228 [ 8130.281300] ---[ end trace 00695dc96be646e7 ]--- Signed-off-by: Anton Sviridenko <anton@corp.bluecherry.net> Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com> Signed-off-by: Sasha Levin <alexander.levin@microsoft.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

[ Upstream commit eb41922 ] scsi host12: BS_1377 : mgmt_invalidate_connection Failed for cid=256 BUG: unable to handle kernel NULL pointer dereference at 0000000000000008 IP: [<ffffffff81332ebf>] __list_add+0xf/0xc0 PGD 0 Oops: 0000 [#1] SMP Modules linked in: ... CPU: 9 PID: 1542 Comm: iscsid Tainted: G ------------ T 3.10.0-514.el7.x86_64 #1 Hardware name: HP ProLiant DL360 Gen9/ProLiant DL360 Gen9, BIOS P89 09/12/2016 task: ffff88076f310fb0 ti: ffff88076bba8000 task.ti: ffff88076bba8000 RIP: 0010:[<ffffffff81332ebf>] [<ffffffff81332ebf>] __list_add+0xf/0xc0 RSP: 0018:ffff88076bbab8e8 EFLAGS: 00010046 RAX: 0000000000000246 RBX: ffff88076bbab990 RCX: 0000000000000000 RDX: 0000000000000000 RSI: ffff880468badf58 RDI: ffff88076bbab990 RBP: ffff88076bbab900 R08: 0000000000000246 R09: 00000000000020de R10: 0000000000000000 R11: ffff88076bbab5be R12: 0000000000000000 R13: ffff880468badf58 R14: 000000000001adb0 R15: ffff88076f310fb0 FS: 00007f377124a880(0000) GS:ffff88046fa40000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 0000000000000008 CR3: 0000000771318000 CR4: 00000000001407e0 DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 DR3: 0000000000000000 DR6: 00000000ffff0ff0 DR7: 0000000000000400 Stack: ffff88076bbab990 ffff880468badf50 0000000000000001 ffff88076bbab938 ffffffff810b128b 0000000000000246 00000000cf9b7040 ffff880468bac7a0 0000000000000000 ffff880468bac7a0 ffff88076bbab9d0 ffffffffa05a6ea3 Call Trace: [<ffffffff810b128b>] prepare_to_wait+0x7b/0x90 [<ffffffffa05a6ea3>] beiscsi_mccq_compl_wait+0x153/0x330 [be2iscsi] [<ffffffff810b1600>] ? wake_up_atomic_t+0x30/0x30 [<ffffffffa05981b1>] beiscsi_ep_disconnect+0x91/0x2d0 [be2iscsi] [<ffffffffa0202ffa>] iscsi_if_ep_disconnect.isra.14+0x5a/0x70 [scsi_transport_iscsi] [<ffffffffa02042fb>] iscsi_if_recv_msg+0x113b/0x14a0 [scsi_transport_iscsi] [<ffffffff811dffd8>] ? __kmalloc_node_track_caller+0x58/0x290 [<ffffffffa02046ee>] iscsi_if_rx+0x8e/0x1f0 [scsi_transport_iscsi] [<ffffffff815a351d>] netlink_unicast+0xed/0x1b0 [<ffffffff815a38fe>] netlink_sendmsg+0x31e/0x690 [<ffffffff815a03e4>] ? netlink_rcv_wake+0x44/0x60 [<ffffffff815a19e3>] ? netlink_recvmsg+0x1e3/0x450 beiscsi_mccq_compl_wait gets called even when MCC tag allocation failed for mgmt_invalidate_connection. mcc_wait is not initialized for tag 0 so causes crash in prepare_to_wait. Signed-off-by: Jitendra Bhivare <jitendra.bhivare@broadcom.com> Reviewed-by: Tomas Henzl <thenzl@redhat.com> Reviewed-by: Chris Leech <cleech@redhat.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com> Signed-off-by: Sasha Levin <alexander.levin@microsoft.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

[ Upstream commit 591a3d7 ] 0day testing by Fengguang Wu triggered this crash while running Trinity: kernel BUG at include/linux/pagemap.h:151! ... CPU: 0 PID: 458 Comm: trinity-c0 Not tainted 4.11.0-rc2-00251-g2947ba0 #1 ... Call Trace: __get_user_pages_fast() get_user_pages_fast() get_futex_key() futex_requeue() do_futex() SyS_futex() do_syscall_64() entry_SYSCALL64_slow_path() It' VM_BUG_ON() due to false-negative in_atomic(). We call page_cache_get_speculative() with disabled local interrupts. It should be atomic enough. So let's check for disabled interrupts in the VM_BUG_ON() condition too, to resolve this. ( This got triggered by the conversion of the x86 GUP code to the generic GUP code. ) Reported-by: Fengguang Wu <fengguang.wu@intel.com> Signed-off-by: Kirill A. Shutemov <kirill.shutemov@linux.intel.com> Cc: Andrew Morton <akpm@linux-foundation.org> Cc: Aneesh Kumar K.V <aneesh.kumar@linux.vnet.ibm.com> Cc: Kirill A. Shutemov <kirill@shutemov.name> Cc: LKP <lkp@01.org> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: linux-mm@kvack.org Link: http://lkml.kernel.org/r/20170324114709.pcytvyb3d6ajux33@black.fi.intel.com Signed-off-by: Ingo Molnar <mingo@kernel.org> Signed-off-by: Sasha Levin <alexander.levin@microsoft.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

[ Upstream commit 622f6e3 ] The path_max parameter determines the max size of buffers allocated but it should not be setable at run time. If can be used to cause an oops root@ubuntu:~# echo 16777216 > /sys/module/apparmor/parameters/path_max root@ubuntu:~# cat /sys/module/apparmor/parameters/path_max Killed [ 122.141911] BUG: unable to handle kernel paging request at ffff880080945fff [ 122.143497] IP: [<ffffffff81228844>] d_absolute_path+0x44/0xa0 [ 122.144742] PGD 220c067 PUD 0 [ 122.145453] Oops: 0002 [#1] SMP [ 122.146204] Modules linked in: vmw_vsock_vmci_transport vsock ppdev vmw_balloon snd_ens1371 btusb snd_ac97_codec gameport snd_rawmidi btrtl snd_seq_device ac97_bus btbcm btintel snd_pcm input_leds bluetooth snd_timer snd joydev soundcore serio_raw coretemp shpchp nfit parport_pc i2c_piix4 8250_fintek vmw_vmci parport mac_hid ib_iser rdma_cm iw_cm ib_cm ib_sa ib_mad ib_core ib_addr iscsi_tcp libiscsi_tcp libiscsi scsi_transport_iscsi autofs4 btrfs raid10 raid456 async_raid6_recov async_memcpy async_pq async_xor async_tx xor raid6_pq libcrc32c raid1 raid0 multipath linear hid_generic usbhid hid crct10dif_pclmul crc32_pclmul ghash_clmulni_intel aesni_intel aes_x86_64 lrw gf128mul glue_helper ablk_helper cryptd vmwgfx psmouse mptspi ttm mptscsih drm_kms_helper mptbase syscopyarea scsi_transport_spi sysfillrect [ 122.163365] ahci sysimgblt e1000 fb_sys_fops libahci drm pata_acpi fjes [ 122.164747] CPU: 3 PID: 1501 Comm: bash Not tainted 4.4.0-59-generic Freescale#80-Ubuntu [ 122.166250] Hardware name: VMware, Inc. VMware Virtual Platform/440BX Desktop Reference Platform, BIOS 6.00 07/02/2015 [ 122.168611] task: ffff88003496aa00 ti: ffff880076474000 task.ti: ffff880076474000 [ 122.170018] RIP: 0010:[<ffffffff81228844>] [<ffffffff81228844>] d_absolute_path+0x44/0xa0 [ 122.171525] RSP: 0018:ffff880076477b90 EFLAGS: 00010206 [ 122.172462] RAX: ffff880080945fff RBX: 0000000000000000 RCX: 0000000001000000 [ 122.173709] RDX: 0000000000ffffff RSI: ffff880080946000 RDI: ffff8800348a1010 [ 122.174978] RBP: ffff880076477bb8 R08: ffff880076477c80 R09: 0000000000000000 [ 122.176227] R10: 00007ffffffff000 R11: ffff88007f946000 R12: ffff88007f946000 [ 122.177496] R13: ffff880076477c80 R14: ffff8800348a1010 R15: ffff8800348a2400 [ 122.178745] FS: 00007fd459eb4700(0000) GS:ffff88007b6c0000(0000) knlGS:0000000000000000 [ 122.180176] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 122.181186] CR2: ffff880080945fff CR3: 0000000073422000 CR4: 00000000001406e0 [ 122.182469] Stack: [ 122.182843] 00ffffff00000001 ffff880080946000 0000000000000000 0000000000000000 [ 122.184409] 00000000570f789c ffff880076477c30 ffffffff81385671 ffff88007a2e7a58 [ 122.185810] 0000000000000000 ffff880076477c88 01000000008a1000 0000000000000000 [ 122.187231] Call Trace: [ 122.187680] [<ffffffff81385671>] aa_path_name+0x81/0x370 [ 122.188637] [<ffffffff813875dd>] profile_transition+0xbd/0xb80 [ 122.190181] [<ffffffff811af9bc>] ? zone_statistics+0x7c/0xa0 [ 122.191674] [<ffffffff81389b20>] apparmor_bprm_set_creds+0x9b0/0xac0 [ 122.193288] [<ffffffff812e1971>] ? ext4_xattr_get+0x81/0x220 [ 122.194793] [<ffffffff812e800c>] ? ext4_xattr_security_get+0x1c/0x30 [ 122.196392] [<ffffffff813449b9>] ? get_vfs_caps_from_disk+0x69/0x110 [ 122.198004] [<ffffffff81232d4f>] ? mnt_may_suid+0x3f/0x50 [ 122.199737] [<ffffffff81344b03>] ? cap_bprm_set_creds+0xa3/0x600 [ 122.201377] [<ffffffff81346e53>] security_bprm_set_creds+0x33/0x50 [ 122.203024] [<ffffffff81214ce5>] prepare_binprm+0x85/0x190 [ 122.204515] [<ffffffff81216545>] do_execveat_common.isra.33+0x485/0x710 [ 122.206200] [<ffffffff81216a6a>] SyS_execve+0x3a/0x50 [ 122.207615] [<ffffffff81838795>] stub_execve+0x5/0x5 [ 122.208978] [<ffffffff818384f2>] ? entry_SYSCALL_64_fastpath+0x16/0x71 [ 122.210615] Code: f8 31 c0 48 63 c2 83 ea 01 48 c7 45 e8 00 00 00 00 48 01 c6 85 d2 48 c7 45 f0 00 00 00 00 48 89 75 e0 89 55 dc 78 0c 48 8d 46 ff <c6> 46 ff 00 48 89 45 e0 48 8d 55 e0 48 8d 4d dc 48 8d 75 e8 e8 [ 122.217320] RIP [<ffffffff81228844>] d_absolute_path+0x44/0xa0 [ 122.218860] RSP <ffff880076477b90> [ 122.219919] CR2: ffff880080945fff [ 122.220936] ---[ end trace 506cdbd85eb6c55e ]--- Reported-by: Tetsuo Handa <penguin-kernel@I-love.SAKURA.ne.jp> Signed-off-by: John Johansen <john.johansen@canonical.com> Signed-off-by: James Morris <james.l.morris@oracle.com> Signed-off-by: Sasha Levin <alexander.levin@microsoft.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

…limit() [ Upstream commit 4868e35 ] setup_initial_memory_limit() is called from early_init_devtree(), which runs prior to feature patching. If the kernel is built with CONFIG_JUMP_LABEL=y and CONFIG_JUMP_LABEL_FEATURE_CHECKS=y then we will potentially get the wrong value. If we also have CONFIG_JUMP_LABEL_FEATURE_CHECK_DEBUG=y we get a warning and backtrace: Warning! mmu_has_feature() used prior to jump label init! CPU: 0 PID: 0 Comm: swapper Not tainted 4.11.0-rc4-gccN-next-20170331-g6af2434 #1 Call Trace: [c000000000fc3d50] [c000000000a26c30] .dump_stack+0xa8/0xe8 (unreliable) [c000000000fc3de0] [c00000000002e6b8] .setup_initial_memory_limit+0xa4/0x104 [c000000000fc3e60] [c000000000d5c23c] .early_init_devtree+0xd0/0x2f8 [c000000000fc3f00] [c000000000d5d3b0] .early_setup+0x90/0x11c [c000000000fc3f90] [c000000000000520] start_here_multiplatform+0x68/0x80 Fix it by using early_mmu_has_feature(). Fixes: c12e6f2 ("powerpc: Add option to use jump label for mmu_has_feature()") Signed-off-by: Michael Ellerman <mpe@ellerman.id.au> Signed-off-by: Sasha Levin <alexander.levin@microsoft.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

[ Upstream commit d2891c4 ] When adding 6lowpan devices very rapidly we sometimes see a crash: [23122.306615] CPU: 2 PID: 0 Comm: swapper/2 Not tainted 4.9.0-43-arm64 #1 Debian 4.9.9.linaro.43-1 [23122.315400] Hardware name: HiKey Development Board (DT) [23122.320623] task: ffff800075443080 task.stack: ffff800075484000 [23122.326551] PC is at expire_timers+0x70/0x150 [23122.330907] LR is at run_timer_softirq+0xa0/0x1a0 [23122.335616] pc : [<ffff000008142dd8>] lr : [<ffff000008142f58>] pstate: 600001c5 This was due to add_peer_chan() unconditionally initializing the lowpan_btle_dev->notify_peers delayed work structure, even if the lowpan_btle_dev passed into add_peer_chan() had previously been initialized. Normally, this would go unnoticed as the delayed work timer is set for 100 msec, however when calling add_peer_chan() faster than 100 msec it clears out a previously queued delay work causing the crash above. To fix this, let add_peer_chan() know when a new lowpan_btle_dev is passed in so that it only performs the delay work initialization when needed. Signed-off-by: Michael Scott <michael.scott@linaro.org> Acked-by: Jukka Rissanen <jukka.rissanen@linux.intel.com> Signed-off-by: Marcel Holtmann <marcel@holtmann.org> Signed-off-by: Sasha Levin <alexander.levin@microsoft.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

[ Upstream commit 2fe2582 ] The rcutorture test suite occasionally provokes a splat due to invoking rt_mutex_lock() which needs to boost the priority of a task currently sitting on a runqueue that belongs to an offline CPU: WARNING: CPU: 0 PID: 12 at /home/paulmck/public_git/linux-rcu/arch/x86/kernel/smp.c:128 native_smp_send_reschedule+0x37/0x40 Modules linked in: CPU: 0 PID: 12 Comm: rcub/7 Not tainted 4.14.0-rc4+ #1 Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS Ubuntu-1.8.2-1ubuntu1 04/01/2014 task: ffff9ed3de5f8cc0 task.stack: ffffbbf80012c000 RIP: 0010:native_smp_send_reschedule+0x37/0x40 RSP: 0018:ffffbbf80012fd10 EFLAGS: 00010082 RAX: 000000000000002f RBX: ffff9ed3dd9cb300 RCX: 0000000000000004 RDX: 0000000080000004 RSI: 0000000000000086 RDI: 00000000ffffffff RBP: ffffbbf80012fd10 R08: 000000000009da7a R09: 0000000000007b9d R10: 0000000000000001 R11: ffffffffbb57c2cd R12: 000000000000000d R13: ffff9ed3de5f8cc0 R14: 0000000000000061 R15: ffff9ed3ded59200 FS: 0000000000000000(0000) GS:ffff9ed3dea00000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 00000000080686f0 CR3: 000000001b9e0000 CR4: 00000000000006f0 Call Trace: resched_curr+0x61/0xd0 switched_to_rt+0x8f/0xa0 rt_mutex_setprio+0x25c/0x410 task_blocks_on_rt_mutex+0x1b3/0x1f0 rt_mutex_slowlock+0xa9/0x1e0 rt_mutex_lock+0x29/0x30 rcu_boost_kthread+0x127/0x3c0 kthread+0x104/0x140 ? rcu_report_unblock_qs_rnp+0x90/0x90 ? kthread_create_on_node+0x40/0x40 ret_from_fork+0x22/0x30 Code: f0 00 0f 92 c0 84 c0 74 14 48 8b 05 34 74 c5 00 be fd 00 00 00 ff 90 a0 00 00 00 5d c3 89 fe 48 c7 c7 a0 c6 fc b9 e8 d5 b5 06 00 <0f> ff 5d c3 0f 1f 44 00 00 8b 05 a2 d1 13 02 85 c0 75 38 55 48 But the target task's priority has already been adjusted, so the only purpose of switched_to_rt() invoking resched_curr() is to wake up the CPU running some task that needs to be preempted by the boosted task. But the CPU is offline, which presumably means that the task must be migrated to some other CPU, and that this other CPU will undertake any needed preemption at the time of migration. Because the runqueue lock is held when resched_curr() is invoked, we know that the boosted task cannot go anywhere, so it is not necessary to invoke resched_curr() in this particular case. This commit therefore makes switched_to_rt() refrain from invoking resched_curr() when the target CPU is offline. Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com> Cc: Ingo Molnar <mingo@redhat.com> Cc: Peter Zijlstra <peterz@infradead.org> Signed-off-by: Sasha Levin <alexander.levin@microsoft.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

[ Upstream commit a0982df ] The rcutorture test suite occasionally provokes a splat due to invoking resched_cpu() on an offline CPU: WARNING: CPU: 2 PID: 8 at /home/paulmck/public_git/linux-rcu/arch/x86/kernel/smp.c:128 native_smp_send_reschedule+0x37/0x40 Modules linked in: CPU: 2 PID: 8 Comm: rcu_preempt Not tainted 4.14.0-rc4+ #1 Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS Ubuntu-1.8.2-1ubuntu1 04/01/2014 task: ffff902ede9daf00 task.stack: ffff96c50010c000 RIP: 0010:native_smp_send_reschedule+0x37/0x40 RSP: 0018:ffff96c50010fdb8 EFLAGS: 00010096 RAX: 000000000000002e RBX: ffff902edaab4680 RCX: 0000000000000003 RDX: 0000000080000003 RSI: 0000000000000000 RDI: 00000000ffffffff RBP: ffff96c50010fdb8 R08: 0000000000000000 R09: 0000000000000001 R10: 0000000000000000 R11: 00000000299f36ae R12: 0000000000000001 R13: ffffffff9de64240 R14: 0000000000000001 R15: ffffffff9de64240 FS: 0000000000000000(0000) GS:ffff902edfc80000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 00000000f7d4c642 CR3: 000000001e0e2000 CR4: 00000000000006e0 Call Trace: resched_curr+0x8f/0x1c0 resched_cpu+0x2c/0x40 rcu_implicit_dynticks_qs+0x152/0x220 force_qs_rnp+0x147/0x1d0 ? sync_rcu_exp_select_cpus+0x450/0x450 rcu_gp_kthread+0x5a9/0x950 kthread+0x142/0x180 ? force_qs_rnp+0x1d0/0x1d0 ? kthread_create_on_node+0x40/0x40 ret_from_fork+0x27/0x40 Code: 14 01 0f 92 c0 84 c0 74 14 48 8b 05 14 4f f4 00 be fd 00 00 00 ff 90 a0 00 00 00 5d c3 89 fe 48 c7 c7 38 89 ca 9d e8 e5 56 08 00 <0f> ff 5d c3 0f 1f 44 00 00 8b 05 52 9e 37 02 85 c0 75 38 55 48 ---[ end trace 26df9e5df4bba4ac ]--- This splat cannot be generated by expedited grace periods because they always invoke resched_cpu() on the current CPU, which is good because expedited grace periods require that resched_cpu() unconditionally succeed. However, other parts of RCU can tolerate resched_cpu() acting as a no-op, at least as long as it doesn't happen too often. This commit therefore makes resched_cpu() invoke resched_curr() only if the CPU is either online or is the current CPU. Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com> Cc: Ingo Molnar <mingo@redhat.com> Cc: Peter Zijlstra <peterz@infradead.org> Signed-off-by: Sasha Levin <alexander.levin@microsoft.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

commit 9ef0f88 upstream. Just when I had decided that flush_cache_range() was always called with a valid context, Helge reported two cases where the "BUG_ON(!vma->vm_mm->context);" was hit on the phantom buildd: kernel BUG at /mnt/sdb6/linux/linux-4.15.4/arch/parisc/kernel/cache.c:587! CPU: 1 PID: 3254 Comm: kworker/1:2 Tainted: G D 4.15.0-1-parisc64-smp #1 Debian 4.15.4-1+b1 Workqueue: events free_ioctx IAOQ[0]: flush_cache_range+0x164/0x168 IAOQ[1]: flush_cache_page+0x0/0x1c8 RP(r2): unmap_page_range+0xae8/0xb88 Backtrace: [<00000000404a6980>] unmap_page_range+0xae8/0xb88 [<00000000404a6ae0>] unmap_single_vma+0xc0/0x188 [<00000000404a6cdc>] zap_page_range_single+0x134/0x1f8 [<00000000404a702c>] unmap_mapping_range+0x1cc/0x208 [<0000000040461518>] truncate_pagecache+0x98/0x108 [<0000000040461624>] truncate_setsize+0x9c/0xb8 [<00000000405d7f30>] put_aio_ring_file+0x80/0x100 [<00000000405d803c>] aio_free_ring+0x8c/0x290 [<00000000405d82c0>] free_ioctx+0x80/0x180 [<0000000040284e6c>] process_one_work+0x21c/0x668 [<00000000402854c4>] worker_thread+0x20c/0x778 [<0000000040291d44>] kthread+0x2d4/0x2e0 [<0000000040204020>] end_fault_vector+0x20/0xc0 This indicates that we need to handle the no context case in flush_cache_range() as we do in flush_cache_mm(). In thinking about this, I realized that we don't need to flush the TLB when there is no context. So, I added context checks to the large flush cases in flush_cache_mm() and flush_cache_range(). The large flush case occurs frequently in flush_cache_mm() and the change should improve fork performance. The v2 version of this change removes the BUG_ON from flush_cache_page() by skipping the TLB flush when there is no context. I also added code to flush the TLB in flush_cache_mm() and flush_cache_range() when we have a context that's not current. Now all three routines handle TLB flushes in a similar manner. Signed-off-by: John David Anglin <dave.anglin@bell.net> Cc: stable@vger.kernel.org # 4.9+ Signed-off-by: Helge Deller <deller@gmx.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

[ Upstream commit dd9c20f ] Add some code to call disable_irq on all the vnic interface's irqs. This fixes a crash observed when closing an active interface, as seen in the oops below when we try to access a buffer in the interrupt handler which we've already freed. Unable to handle kernel paging request for data at address 0x00000001 Faulting instruction address: 0xd000000003886824 Oops: Kernel access of bad area, sig: 11 [#1] SMP NR_CPUS=2048 NUMA pSeries Modules linked in: ibmvnic(OEN) rpadlpar_io(X) rpaphp(X) tcp_diag udp_diag inet_diag unix_diag af_packet_diag netlink_diag rpcsec_ Supported: No, Unsupported modules are loaded CPU: 8 PID: 0 Comm: swapper/8 Tainted: G OE NX 4.4.49-92.11-default #1 task: c00000007f990110 ti: c0000000fffa0000 task.ti: c00000007f9b8000 NIP: d000000003886824 LR: d000000003886824 CTR: c0000000007eff60 REGS: c0000000fffa3a70 TRAP: 0300 Tainted: G OE NX (4.4.49-92.11-default) MSR: 8000000000009033 <SF,EE,ME,IR,DR,RI,LE> CR: 22008042 XER: 20000008 CFAR: c000000000008468 DAR: 0000000000000001 DSISR: 40000000 SOFTE: 0 GPR00: d000000003886824 c0000000fffa3cf0 d000000003894118 0000000000000000 GPR04: 0000000000000000 0000000000000000 c000000001249da0 0000000000000000 GPR08: 000000000000000e 0000000000000000 c0000000ccb00000 d000000003889180 GPR12: c0000000007eff60 c000000007af4c00 0000000000000001 c0000000010def30 GPR16: c00000007f9b8000 c000000000b98c30 c00000007f9b8080 c000000000bab858 GPR20: 0000000000000005 0000000000000000 c0000000ff5d7e80 c0000000f809f648 GPR24: c0000000ff5d7ec8 0000000000000000 0000000000000000 c0000000ccb001a0 GPR28: 000000000000000a c0000000f809f600 c0000000fd4cd900 c0000000f9cd5b00 NIP [d000000003886824] ibmvnic_interrupt_tx+0x114/0x380 [ibmvnic] LR [d000000003886824] ibmvnic_interrupt_tx+0x114/0x380 [ibmvnic] Call Trace: [c0000000fffa3cf0] [d000000003886824] ibmvnic_interrupt_tx+0x114/0x380 [ibmvnic] (unreliable) [c0000000fffa3dd0] [c000000000132940] __handle_irq_event_percpu+0x90/0x2e0 [c0000000fffa3e90] [c000000000132bcc] handle_irq_event_percpu+0x3c/0x90 [c0000000fffa3ed0] [c000000000132c88] handle_irq_event+0x68/0xc0 [c0000000fffa3f00] [c000000000137edc] handle_fasteoi_irq+0xec/0x250 [c0000000fffa3f30] [c000000000131b04] generic_handle_irq+0x54/0x80 [c0000000fffa3f60] [c000000000011190] __do_irq+0x80/0x1d0 [c0000000fffa3f90] [c0000000000248d8] call_do_irq+0x14/0x24 [c00000007f9bb9e0] [c000000000011380] do_IRQ+0xa0/0x120 [c00000007f9bba40] [c000000000002594] hardware_interrupt_common+0x114/0x180 Signed-off-by: Brian King <brking@linux.vnet.ibm.com> Signed-off-by: Nathan Fontenot <nfont@linux.vnet.ibm.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Sasha Levin <alexander.levin@microsoft.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

[ Upstream commit 21a8e9d ] Existing API 'ieee80211_get_sdata_band' returns default 2 GHz band even if the channel context configuration is NULL. This crashes for chipsets which support 5 Ghz alone when it tries to access members of 'sband'. Channel context configuration can be NULL in multivif case and when channel switch is in progress (or) when it fails. Fix this by replacing the API 'ieee80211_get_sdata_band' with 'ieee80211_get_sband' which returns a NULL pointer for sband when the channel configuration is NULL. An example scenario is as below: In multivif mode (AP + STA) with drivers like ath10k, when we do a channel switch in the AP vif (which has a number of clients connected) and a STA vif which is connected to some other AP, when the channel switch in AP vif fails, while the STA vifs tries to connect to the other AP, there is a window where the channel context is NULL/invalid and this results in a crash while the clients connected to the AP vif tries to reconnect and this race is very similar to the one investigated by Michal in https://patchwork.kernel.org/patch/3788161/ and this does happens with hardware that supports 5Ghz alone after long hours of testing with continuous channel switch on the AP vif ieee80211 phy0: channel context reservation cannot be finalized because some interfaces aren't switching wlan0: failed to finalize CSA, disconnecting wlan0-1: deauthenticating from 8c:fd:f0:01:54:9c by local choice (Reason: 3=DEAUTH_LEAVING) WARNING: CPU: 1 PID: 19032 at net/mac80211/ieee80211_i.h:1013 sta_info_alloc+0x374/0x3fc [mac80211] [<bf77272c>] (sta_info_alloc [mac80211]) [<bf78776c>] (ieee80211_add_station [mac80211])) [<bf73cc50>] (nl80211_new_station [cfg80211]) Unable to handle kernel NULL pointer dereference at virtual address 00000014 pgd = d5f4c000 Internal error: Oops: 17 [#1] PREEMPT SMP ARM PC is at sta_info_alloc+0x380/0x3fc [mac80211] LR is at sta_info_alloc+0x37c/0x3fc [mac80211] [<bf772738>] (sta_info_alloc [mac80211]) [<bf78776c>] (ieee80211_add_station [mac80211]) [<bf73cc50>] (nl80211_new_station [cfg80211])) Cc: Michal Kazior <michal.kazior@tieto.com> Signed-off-by: Mohammed Shafi Shajakhan <mohammed@qti.qualcomm.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: Sasha Levin <alexander.levin@microsoft.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

[ Upstream commit 5168775 ] [ 413.687439] BUG: unable to handle kernel NULL pointer dereference at 0000000000000548 [ 413.687479] IP: [<ffffffff8109b175>] to_live_kthread+0x5/0x60 [ 413.687507] PGD 1efd12067 [ 413.687519] PUD 1efd11067 [ 413.687531] PMD 0 [ 413.687543] Oops: 0000 [#1] SMP [ 413.687557] Modules linked in: amdgpu(OE) ttm(OE) drm_kms_helper(E) drm(E) i2c_algo_bit(E) fb_sys_fops(E) syscopyarea(E) sysfillrect(E) sysimgblt(E) rpcsec_gss_krb5(E) nfsv4(E) nfs(E) fscache(E) snd_hda_codec_realtek(E) snd_hda_codec_generic(E) snd_hda_codec_hdmi(E) snd_hda_intel(E) eeepc_wmi(E) snd_hda_codec(E) asus_wmi(E) snd_hda_core(E) sparse_keymap(E) snd_hwdep(E) video(E) snd_pcm(E) snd_seq_midi(E) joydev(E) snd_seq_midi_event(E) snd_rawmidi(E) snd_seq(E) snd_seq_device(E) snd_timer(E) kvm(E) irqbypass(E) crct10dif_pclmul(E) snd(E) crc32_pclmul(E) ghash_clmulni_intel(E) soundcore(E) aesni_intel(E) aes_x86_64(E) lrw(E) gf128mul(E) glue_helper(E) ablk_helper(E) cryptd(E) shpchp(E) serio_raw(E) i2c_piix4(E) 8250_dw(E) i2c_designware_platform(E) i2c_designware_core(E) mac_hid(E) binfmt_misc(E) [ 413.687894] parport_pc(E) ppdev(E) lp(E) parport(E) nfsd(E) auth_rpcgss(E) nfs_acl(E) lockd(E) grace(E) sunrpc(E) autofs4(E) hid_generic(E) usbhid(E) hid(E) psmouse(E) ahci(E) r8169(E) mii(E) libahci(E) wmi(E) [ 413.687989] CPU: 13 PID: 1134 Comm: kworker/13:2 Tainted: G OE 4.9.0-custom SolidRun#4 [ 413.688019] Hardware name: System manufacturer System Product Name/PRIME B350-PLUS, BIOS 0606 04/06/2017 [ 413.688089] Workqueue: events amd_sched_job_timedout [amdgpu] [ 413.688116] task: ffff88020f9657c0 task.stack: ffffc90001a88000 [ 413.688139] RIP: 0010:[<ffffffff8109b175>] [<ffffffff8109b175>] to_live_kthread+0x5/0x60 [ 413.688171] RSP: 0018:ffffc90001a8bd60 EFLAGS: 00010282 [ 413.688191] RAX: ffff88020f0073f8 RBX: ffff88020f000000 RCX: 0000000000000000 [ 413.688217] RDX: 0000000000000001 RSI: ffff88020f9670c0 RDI: 0000000000000000 [ 413.688243] RBP: ffffc90001a8bd78 R08: 0000000000000000 R09: 0000000000001000 [ 413.688269] R10: 0000006051b11a82 R11: 0000000000000001 R12: 0000000000000000 [ 413.688295] R13: ffff88020f002770 R14: ffff88020f004838 R15: ffff8801b23c2c60 [ 413.688321] FS: 0000000000000000(0000) GS:ffff88021ef40000(0000) knlGS:0000000000000000 [ 413.688352] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 413.688373] CR2: 0000000000000548 CR3: 00000001efd0f000 CR4: 00000000003406e0 [ 413.688399] Stack: [ 413.688407] ffffffff8109b304 ffff88020f000000 0000000000000070 ffffc90001a8bdf0 [ 413.688439] ffffffffa05ce29d ffffffffa052feb7 ffffffffa07b5820 ffffc90001a8bda0 [ 413.688470] ffffffff00000018 ffff8801bb88f060 0000000001a8bdb8 ffff88021ef59280 [ 413.688502] Call Trace: [ 413.688514] [<ffffffff8109b304>] ? kthread_park+0x14/0x60 [ 413.688555] [<ffffffffa05ce29d>] amdgpu_gpu_reset+0x7d/0x670 [amdgpu] [ 413.688589] [<ffffffffa052feb7>] ? drm_printk+0x97/0xa0 [drm] [ 413.688643] [<ffffffffa0698136>] amdgpu_job_timedout+0x46/0x50 [amdgpu] [ 413.688700] [<ffffffffa06969e7>] amd_sched_job_timedout+0x17/0x20 [amdgpu] [ 413.688727] [<ffffffff81095493>] process_one_work+0x153/0x3f0 [ 413.688751] [<ffffffff81095c5b>] worker_thread+0x12b/0x4b0 [ 413.688773] [<ffffffff8100392e>] ? do_syscall_64+0x6e/0x180 [ 413.688795] [<ffffffff81095b30>] ? rescuer_thread+0x350/0x350 [ 413.688818] [<ffffffff8100392e>] ? do_syscall_64+0x6e/0x180 [ 413.688839] [<ffffffff8109b423>] kthread+0xd3/0xf0 [ 413.688858] [<ffffffff8109b350>] ? kthread_park+0x60/0x60 [ 413.688881] [<ffffffff817e1ee5>] ret_from_fork+0x25/0x30 [ 413.688901] Code: 25 40 d3 00 00 48 8b 80 48 05 00 00 48 89 e5 5d 48 8b 40 c8 48 c1 e8 02 83 e0 01 c3 66 2e 0f 1f 84 00 00 00 00 00 0f 1f 44 00 00 <48> 8b b7 48 05 00 00 55 48 89 e5 48 85 f6 74 31 8b 97 f8 18 00 [ 413.689045] RIP [<ffffffff8109b175>] to_live_kthread+0x5/0x60 [ 413.689064] RSP <ffffc90001a8bd60> [ 413.689076] CR2: 0000000000000548 [ 413.697985] ---[ end trace 0a314a64821f84e9 ]--- The root cause is some ring doesn't have scheduler, like KIQ ring Reviewed-by: Christian König <christian.koenig@amd.com> Signed-off-by: Chunming Zhou <David1.Zhou@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Sasha Levin <alexander.levin@microsoft.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

[ Upstream commit 9b70de6 ] The bnx2x driver is not providing proper alignment on the receive buffers it passes to build_skb(), causing skb_shared_info to be misaligned. skb_shared_info contains an atomic, and while PPC normally supports unaligned accesses, it does not support unaligned atomics. Aligning the size of rx buffers will ensure that page_frag_alloc() returns aligned addresses. This can be reproduced on PPC by setting the network MTU to 1450 (or other non-multiple-of-4) and then generating sufficient inbound network traffic (one or two large "wget"s usually does it), producing the following oops: Unable to handle kernel paging request for unaligned access at address 0xc00000ffc43af656 Faulting instruction address: 0xc00000000080ef8c Oops: Kernel access of bad area, sig: 7 [#1] SMP NR_CPUS=2048 NUMA PowerNV Modules linked in: vmx_crypto powernv_rng rng_core powernv_op_panel leds_powernv led_class nfsd ip_tables x_tables autofs4 xfs lpfc bnx2x mdio libcrc32c crc_t10dif crct10dif_generic crct10dif_common CPU: 104 PID: 0 Comm: swapper/104 Not tainted 4.11.0-rc8-00088-g4c761da SolidRun#2 task: c00000ffd4892400 task.stack: c00000ffd4920000 NIP: c00000000080ef8c LR: c00000000080eee8 CTR: c0000000001f8320 REGS: c00000ffffc33710 TRAP: 0600 Not tainted (4.11.0-rc8-00088-g4c761da) MSR: 9000000000009033 <SF,HV,EE,ME,IR,DR,RI,LE> CR: 24082042 XER: 00000000 CFAR: c00000000080eea0 DAR: c00000ffc43af656 DSISR: 00000000 SOFTE: 1 GPR00: c000000000907f64 c00000ffffc33990 c000000000dd3b00 c00000ffcaf22100 GPR04: c00000ffcaf22e00 0000000000000000 0000000000000000 0000000000000000 GPR08: 0000000000b80008 c00000ffc43af636 c00000ffc43af656 0000000000000000 GPR12: c0000000001f6f00 c00000000fe1a000 000000000000049f 000000000000c51f GPR16: 00000000ffffef33 0000000000000000 0000000000008a43 0000000000000001 GPR20: c00000ffc58a90c0 0000000000000000 000000000000dd86 0000000000000000 GPR24: c000007fd0ed10c0 00000000ffffffff 0000000000000158 000000000000014a GPR28: c00000ffc43af010 c00000ffc9144000 c00000ffcaf22e00 c00000ffcaf22100 NIP [c00000000080ef8c] __skb_clone+0xdc/0x140 LR [c00000000080eee8] __skb_clone+0x38/0x140 Call Trace: [c00000ffffc33990] [c00000000080fb74] skb_clone+0x74/0x110 (unreliable) [c00000ffffc339c0] [c000000000907f64] packet_rcv+0x144/0x510 [c00000ffffc33a40] [c000000000827b64] __netif_receive_skb_core+0x5b4/0xd80 [c00000ffffc33b00] [c00000000082b2bc] netif_receive_skb_internal+0x2c/0xc0 [c00000ffffc33b40] [c00000000082c49c] napi_gro_receive+0x11c/0x260 [c00000ffffc33b80] [d000000066483d68] bnx2x_poll+0xcf8/0x17b0 [bnx2x] [c00000ffffc33d00] [c00000000082babc] net_rx_action+0x31c/0x480 [c00000ffffc33e10] [c0000000000d5a44] __do_softirq+0x164/0x3d0 [c00000ffffc33f00] [c0000000000d60a8] irq_exit+0x108/0x120 [c00000ffffc33f20] [c000000000015b98] __do_irq+0x98/0x200 [c00000ffffc33f90] [c000000000027f14] call_do_irq+0x14/0x24 [c00000ffd4923a90] [c000000000015d94] do_IRQ+0x94/0x110 [c00000ffd4923ae0] [c000000000008d90] hardware_interrupt_common+0x150/0x160 Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Sasha Levin <alexander.levin@microsoft.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

[ Upstream commit 633e879 ] This changed is needed to avoid locking problem during boot as shown: <5>[ 8.824096] Registering SWP/SWPB emulation handler <6>[ 8.977294] clock: disabling unused clocks to save power <3>[ 9.108154] BUG: sleeping function called from invalid context at kernel_albert/kernel/mutex.c:269 <3>[ 9.122894] in_atomic(): 1, irqs_disabled(): 0, pid: 1, name: swapper/0 <4>[ 9.130249] 3 locks held by swapper/0/1: <4>[ 9.134613] #0: (&__lockdep_no_validate__){......}, at: [<c0342430>] __driver_attach+0x58/0xa8 <4>[ 9.144500] #1: (&__lockdep_no_validate__){......}, at: [<c0342440>] __driver_attach+0x68/0xa8 <4>[ 9.154357] SolidRun#2: (&polling_timer){......}, at: [<c0053770>] run_timer_softirq+0x108/0x3ec <4>[ 9.163726] Backtrace: <4>[ 9.166473] [<c001269c>] (dump_backtrace+0x0/0x114) from [<c067e5f0>] (dump_stack+0x20/0x24) <4>[ 9.175811] r6:00203230 r5:0000010d r4:d782e000 r3:60000113 <4>[ 9.182250] [<c067e5d0>] (dump_stack+0x0/0x24) from [<c007441c>] (__might_sleep+0x10c/0x128) <4>[ 9.191650] [<c0074310>] (__might_sleep+0x0/0x128) from [<c0688f60>] (mutex_lock_nested+0x34/0x36c) <4>[ 9.201660] r5:c02d5350 r4:d79a0c64 <4>[ 9.205688] [<c0688f2c>] (mutex_lock_nested+0x0/0x36c) from [<c02d5350>] (regulator_set_current_limit+0x30/0x118) <4>[ 9.217071] [<c02d5320>] (regulator_set_current_limit+0x0/0x118) from [<c0435ce0>] (update_charger+0x84/0xc4) <4>[ 9.228027] r7:d782fb20 r6:00000101 r5:c1767e94 r4:00000000 <4>[ 9.234436] [<c0435c5c>] (update_charger+0x0/0xc4) from [<c0435d40>] (psy_changed+0x20/0x48) <4>[ 9.243804] r5:d782e000 r4:c1767e94 <4>[ 9.247802] [<c0435d20>] (psy_changed+0x0/0x48) from [<c0435dec>] (polling_timer_func+0x84/0xb8) <4>[ 9.257537] r4:c1767e94 r3:00000002 <4>[ 9.261566] [<c0435d68>] (polling_timer_func+0x0/0xb8) from [<c00537e4>] (run_timer_softirq+0x17c/0x3ec) <4>[ 9.272033] r4:c1767eb0 r3:00000000 <4>[ 9.276062] [<c0053668>] (run_timer_softirq+0x0/0x3ec) from [<c004b000>] (__do_softirq+0xf0/0x298) <4>[ 9.286010] [<c004af10>] (__do_softirq+0x0/0x298) from [<c004b650>] (irq_exit+0x98/0xa0) <4>[ 9.295013] [<c004b5b8>] (irq_exit+0x0/0xa0) from [<c000edbc>] (handle_IRQ+0x60/0xc0) <4>[ 9.303680] r4:c1194e98 r3:c00bc778 <4>[ 9.307708] [<c000ed5c>] (handle_IRQ+0x0/0xc0) from [<c0008504>] (gic_handle_irq+0x34/0x68) <4>[ 9.316955] r8:000ac383 r7:d782fc3c r6:d782fc08 r5:c11936c4 r4:e0802100 <4>[ 9.324310] r3:c026ba48 <4>[ 9.327301] [<c00084d0>] (gic_handle_irq+0x0/0x68) from [<c068c2c0>] (__irq_svc+0x40/0x74) <4>[ 9.336456] Exception stack(0xd782fc08 to 0xd782fc50) <4>[ 9.342041] fc00: d6e30e6c ac383627 00000000 ac383417 ea19c000 ea200000 <4>[ 9.351104] fc20: beffffff 00000667 000ac383 d6e30670 d6e3066c d782fc94 d782fbe8 d782fc50 <4>[ 9.360168] fc40: c026ba48 c001d1f0 00000113 ffffffff Fixes: b299804 ("[BATTERY] pda_power platform driver") Signed-off-by: Michael Trimarchi <michael@amarulasolutions.com> Signed-off-by: Anthony Brandon <anthony@amarulasolutions.com> Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.co.uk> Signed-off-by: Sasha Levin <alexander.levin@microsoft.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

[ Upstream commit eabe065 ] By poking at /debug/sched_features I triggered the following splat: [] ====================================================== [] WARNING: possible circular locking dependency detected [] 4.11.0-00873-g964c8b7-dirty torvalds#694 Not tainted [] ------------------------------------------------------ [] bash/2109 is trying to acquire lock: [] (cpu_hotplug_lock.rw_sem){++++++}, at: [<ffffffff8120cb8b>] static_key_slow_dec+0x1b/0x50 [] [] but task is already holding lock: [] (&sb->s_type->i_mutex_key#4){+++++.}, at: [<ffffffff81140216>] sched_feat_write+0x86/0x170 [] [] which lock already depends on the new lock. [] [] [] the existing dependency chain (in reverse order) is: [] [] -> SolidRun#2 (&sb->s_type->i_mutex_key#4){+++++.}: [] lock_acquire+0x100/0x210 [] down_write+0x28/0x60 [] start_creating+0x5e/0xf0 [] debugfs_create_dir+0x13/0x110 [] blk_mq_debugfs_register+0x21/0x70 [] blk_mq_register_dev+0x64/0xd0 [] blk_register_queue+0x6a/0x170 [] device_add_disk+0x22d/0x440 [] loop_add+0x1f3/0x280 [] loop_init+0x104/0x142 [] do_one_initcall+0x43/0x180 [] kernel_init_freeable+0x1de/0x266 [] kernel_init+0xe/0x100 [] ret_from_fork+0x31/0x40 [] [] -> #1 (all_q_mutex){+.+.+.}: [] lock_acquire+0x100/0x210 [] __mutex_lock+0x6c/0x960 [] mutex_lock_nested+0x1b/0x20 [] blk_mq_init_allocated_queue+0x37c/0x4e0 [] blk_mq_init_queue+0x3a/0x60 [] loop_add+0xe5/0x280 [] loop_init+0x104/0x142 [] do_one_initcall+0x43/0x180 [] kernel_init_freeable+0x1de/0x266 [] kernel_init+0xe/0x100 [] ret_from_fork+0x31/0x40 [] *** DEADLOCK *** [] [] 3 locks held by bash/2109: [] #0: (sb_writers#11){.+.+.+}, at: [<ffffffff81292bcd>] vfs_write+0x17d/0x1a0 [] #1: (debugfs_srcu){......}, at: [<ffffffff8155a90d>] full_proxy_write+0x5d/0xd0 [] SolidRun#2: (&sb->s_type->i_mutex_key#4){+++++.}, at: [<ffffffff81140216>] sched_feat_write+0x86/0x170 [] [] stack backtrace: [] CPU: 9 PID: 2109 Comm: bash Not tainted 4.11.0-00873-g964c8b7-dirty torvalds#694 [] Hardware name: Intel Corporation S2600GZ/S2600GZ, BIOS SE5C600.86B.02.02.0002.122320131210 12/23/2013 [] Call Trace: [] lock_acquire+0x100/0x210 [] get_online_cpus+0x2a/0x90 [] static_key_slow_dec+0x1b/0x50 [] static_key_disable+0x20/0x30 [] sched_feat_write+0x131/0x170 [] full_proxy_write+0x97/0xd0 [] __vfs_write+0x28/0x120 [] vfs_write+0xb5/0x1a0 [] SyS_write+0x49/0xa0 [] entry_SYSCALL_64_fastpath+0x23/0xc2 This is because of the cpu hotplug lock rework. Break the chain at #1 by reversing the lock acquisition order. This way i_mutex_key#4 no longer depends on cpu_hotplug_lock and things are good. Cc: Jens Axboe <axboe@kernel.dk> Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org> Signed-off-by: Jens Axboe <axboe@fb.com> Signed-off-by: Sasha Levin <alexander.levin@microsoft.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

[ Upstream commit 2b022ab ] In case that CONFIG_SLUB_DEBUG is on and pty is used, races between release_one_tty and flush_to_ldisc work threads may happen and lead to use-after-free condition on tty->link->port. Because SLUB_DEBUG is turned on, freed tty->link->port is filled with POISON_FREE value. So far without SLUB_DEBUG, port was filled with zero and flush_to_ldisc could return without a problem by checking if tty is NULL. CPU 0 CPU 1 ----- ----- release_tty pty_write cancel_work_sync(tty) to = tty->link tty_kref_put(tty->link) tty_schedule_flip(to->port) << workqueue >> ... release_one_tty ... pty_cleanup ... kfree(tty->link->port) << workqueue >> flush_to_ldisc tty = READ_ONCE(port->itty) tty is 0x6b6b6b6b6b6b6b6b !!PANIC!! access tty->ldisc Unable to handle kernel paging request at virtual address 6b6b6b6b6b6b6b93 pgd = ffffffc0eb1c3000 [6b6b6b6b6b6b6b93] *pgd=0000000000000000, *pud=0000000000000000 ------------[ cut here ]------------ Kernel BUG at ffffff800851154c [verbose debug info unavailable] Internal error: Oops - BUG: 96000004 [#1] PREEMPT SMP CPU: 3 PID: 265 Comm: kworker/u8:9 Tainted: G W 3.18.31-g0a58eeb #1 Hardware name: Qualcomm Technologies, Inc. MSM 8996pro v1.1 + PMI8996 Carbide (DT) Workqueue: events_unbound flush_to_ldisc task: ffffffc0ed610ec0 ti: ffffffc0ed624000 task.ti: ffffffc0ed624000 PC is at ldsem_down_read_trylock+0x0/0x4c LR is at tty_ldisc_ref+0x24/0x4c pc : [<ffffff800851154c>] lr : [<ffffff800850f6c0>] pstate: 80400145 sp : ffffffc0ed627cd0 x29: ffffffc0ed627cd0 x28: 0000000000000000 x27: ffffff8009e05000 x26: ffffffc0d382cfa0 x25: 0000000000000000 x24: ffffff800a012f08 x23: 0000000000000000 x22: ffffffc0703fbc88 x21: 6b6b6b6b6b6b6b6b x20: 6b6b6b6b6b6b6b93 x19: 0000000000000000 x18: 0000000000000001 x17: 00e80000f80d6f53 x16: 0000000000000001 x15: 0000007f7d826fff x14: 00000000000000a0 x13: 0000000000000000 x12: 0000000000000109 x11: 0000000000000000 x10: 0000000000000000 x9 : ffffffc0ed624000 x8 : ffffffc0ed611580 x7 : 0000000000000000 x6 : ffffff800a42e000 x5 : 00000000000003fc x4 : 0000000003bd1201 x3 : 0000000000000001 x2 : 0000000000000001 x1 : ffffff800851004c x0 : 6b6b6b6b6b6b6b93 Signed-off-by: Sahara <keun-o.park@darkmatter.ae> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Sasha Levin <alexander.levin@microsoft.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

commit 7688f2c upstream. The attempt to join multicast group without ensuring that CMA device exists will lead to the following crash reported by syzkaller. [ 64.076794] BUG: KASAN: null-ptr-deref in rdma_join_multicast+0x26e/0x12c0 [ 64.076797] Read of size 8 at addr 00000000000000b0 by task join/691 [ 64.076797] [ 64.076800] CPU: 1 PID: 691 Comm: join Not tainted 4.16.0-rc1-00219-gb97853b65b93 SolidRun#23 [ 64.076802] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS rel-1.11.0-0-g63451fca13-prebuilt.qemu-proj4 [ 64.076803] Call Trace: [ 64.076809] dump_stack+0x5c/0x77 [ 64.076817] kasan_report+0x163/0x380 [ 64.085859] ? rdma_join_multicast+0x26e/0x12c0 [ 64.086634] rdma_join_multicast+0x26e/0x12c0 [ 64.087370] ? rdma_disconnect+0xf0/0xf0 [ 64.088579] ? __radix_tree_replace+0xc3/0x110 [ 64.089132] ? node_tag_clear+0x81/0xb0 [ 64.089606] ? idr_alloc_u32+0x12e/0x1a0 [ 64.090517] ? __fprop_inc_percpu_max+0x150/0x150 [ 64.091768] ? tracing_record_taskinfo+0x10/0xc0 [ 64.092340] ? idr_alloc+0x76/0xc0 [ 64.092951] ? idr_alloc_u32+0x1a0/0x1a0 [ 64.093632] ? ucma_process_join+0x23d/0x460 [ 64.094510] ucma_process_join+0x23d/0x460 [ 64.095199] ? ucma_migrate_id+0x440/0x440 [ 64.095696] ? futex_wake+0x10b/0x2a0 [ 64.096159] ucma_join_multicast+0x88/0xe0 [ 64.096660] ? ucma_process_join+0x460/0x460 [ 64.097540] ? _copy_from_user+0x5e/0x90 [ 64.098017] ucma_write+0x174/0x1f0 [ 64.098640] ? ucma_resolve_route+0xf0/0xf0 [ 64.099343] ? rb_erase_cached+0x6c7/0x7f0 [ 64.099839] __vfs_write+0xc4/0x350 [ 64.100622] ? perf_syscall_enter+0xe4/0x5f0 [ 64.101335] ? kernel_read+0xa0/0xa0 [ 64.103525] ? perf_sched_cb_inc+0xc0/0xc0 [ 64.105510] ? syscall_exit_register+0x2a0/0x2a0 [ 64.107359] ? __switch_to+0x351/0x640 [ 64.109285] ? fsnotify+0x899/0x8f0 [ 64.111610] ? fsnotify_unmount_inodes+0x170/0x170 [ 64.113876] ? __fsnotify_update_child_dentry_flags+0x30/0x30 [ 64.115813] ? ring_buffer_record_is_on+0xd/0x20 [ 64.117824] ? __fget+0xa8/0xf0 [ 64.119869] vfs_write+0xf7/0x280 [ 64.122001] SyS_write+0xa1/0x120 [ 64.124213] ? SyS_read+0x120/0x120 [ 64.126644] ? SyS_read+0x120/0x120 [ 64.128563] do_syscall_64+0xeb/0x250 [ 64.130732] entry_SYSCALL_64_after_hwframe+0x21/0x86 [ 64.132984] RIP: 0033:0x7f5c994ade99 [ 64.135699] RSP: 002b:00007f5c99b97d98 EFLAGS: 00000246 ORIG_RAX: 0000000000000001 [ 64.138740] RAX: ffffffffffffffda RBX: 00000000200001e4 RCX: 00007f5c994ade99 [ 64.141056] RDX: 00000000000000a0 RSI: 00000000200001c0 RDI: 0000000000000015 [ 64.143536] RBP: 00007f5c99b97ec0 R08: 0000000000000000 R09: 0000000000000000 [ 64.146017] R10: 0000000000000000 R11: 0000000000000246 R12: 00007f5c99b97fc0 [ 64.148608] R13: 0000000000000000 R14: 00007fff660e1c40 R15: 00007f5c99b989c0 [ 64.151060] [ 64.153703] Disabling lock debugging due to kernel taint [ 64.156032] BUG: unable to handle kernel NULL pointer dereference at 00000000000000b0 [ 64.159066] IP: rdma_join_multicast+0x26e/0x12c0 [ 64.161451] PGD 80000001d0298067 P4D 80000001d0298067 PUD 1dea39067 PMD 0 [ 64.164442] Oops: 0000 [#1] SMP KASAN PTI [ 64.166817] CPU: 1 PID: 691 Comm: join Tainted: G B 4.16.0-rc1-00219-gb97853b65b93 SolidRun#23 [ 64.170004] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS rel-1.11.0-0-g63451fca13-prebuilt.qemu-proj4 [ 64.174985] RIP: 0010:rdma_join_multicast+0x26e/0x12c0 [ 64.177246] RSP: 0018:ffff8801c8207860 EFLAGS: 00010282 [ 64.179901] RAX: 0000000000000000 RBX: 0000000000000000 RCX: ffffffff94789522 [ 64.183344] RDX: 1ffffffff2d50fa5 RSI: 0000000000000297 RDI: 0000000000000297 [ 64.186237] RBP: ffff8801c8207a50 R08: 0000000000000000 R09: ffffed0039040ea7 [ 64.189328] R10: 0000000000000001 R11: ffffed0039040ea6 R12: 0000000000000000 [ 64.192634] R13: 0000000000000000 R14: ffff8801e2022800 R15: ffff8801d4ac2400 [ 64.196105] FS: 00007f5c99b98700(0000) GS:ffff8801e5d00000(0000) knlGS:0000000000000000 [ 64.199211] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 64.202046] CR2: 00000000000000b0 CR3: 00000001d1c48004 CR4: 00000000003606a0 [ 64.205032] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 [ 64.208221] DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 [ 64.211554] Call Trace: [ 64.213464] ? rdma_disconnect+0xf0/0xf0 [ 64.216124] ? __radix_tree_replace+0xc3/0x110 [ 64.219337] ? node_tag_clear+0x81/0xb0 [ 64.222140] ? idr_alloc_u32+0x12e/0x1a0 [ 64.224422] ? __fprop_inc_percpu_max+0x150/0x150 [ 64.226588] ? tracing_record_taskinfo+0x10/0xc0 [ 64.229763] ? idr_alloc+0x76/0xc0 [ 64.232186] ? idr_alloc_u32+0x1a0/0x1a0 [ 64.234505] ? ucma_process_join+0x23d/0x460 [ 64.237024] ucma_process_join+0x23d/0x460 [ 64.240076] ? ucma_migrate_id+0x440/0x440 [ 64.243284] ? futex_wake+0x10b/0x2a0 [ 64.245302] ucma_join_multicast+0x88/0xe0 [ 64.247783] ? ucma_process_join+0x460/0x460 [ 64.250841] ? _copy_from_user+0x5e/0x90 [ 64.253878] ucma_write+0x174/0x1f0 [ 64.257008] ? ucma_resolve_route+0xf0/0xf0 [ 64.259877] ? rb_erase_cached+0x6c7/0x7f0 [ 64.262746] __vfs_write+0xc4/0x350 [ 64.265537] ? perf_syscall_enter+0xe4/0x5f0 [ 64.267792] ? kernel_read+0xa0/0xa0 [ 64.270358] ? perf_sched_cb_inc+0xc0/0xc0 [ 64.272575] ? syscall_exit_register+0x2a0/0x2a0 [ 64.275367] ? __switch_to+0x351/0x640 [ 64.277700] ? fsnotify+0x899/0x8f0 [ 64.280530] ? fsnotify_unmount_inodes+0x170/0x170 [ 64.283156] ? __fsnotify_update_child_dentry_flags+0x30/0x30 [ 64.286182] ? ring_buffer_record_is_on+0xd/0x20 [ 64.288749] ? __fget+0xa8/0xf0 [ 64.291136] vfs_write+0xf7/0x280 [ 64.292972] SyS_write+0xa1/0x120 [ 64.294965] ? SyS_read+0x120/0x120 [ 64.297474] ? SyS_read+0x120/0x120 [ 64.299751] do_syscall_64+0xeb/0x250 [ 64.301826] entry_SYSCALL_64_after_hwframe+0x21/0x86 [ 64.304352] RIP: 0033:0x7f5c994ade99 [ 64.306711] RSP: 002b:00007f5c99b97d98 EFLAGS: 00000246 ORIG_RAX: 0000000000000001 [ 64.309577] RAX: ffffffffffffffda RBX: 00000000200001e4 RCX: 00007f5c994ade99 [ 64.312334] RDX: 00000000000000a0 RSI: 00000000200001c0 RDI: 0000000000000015 [ 64.315783] RBP: 00007f5c99b97ec0 R08: 0000000000000000 R09: 0000000000000000 [ 64.318365] R10: 0000000000000000 R11: 0000000000000246 R12: 00007f5c99b97fc0 [ 64.320980] R13: 0000000000000000 R14: 00007fff660e1c40 R15: 00007f5c99b989c0 [ 64.323515] Code: e8 e8 79 08 ff 4c 89 ff 45 0f b6 a7 b8 01 00 00 e8 68 7c 08 ff 49 8b 1f 4d 89 e5 49 c1 e4 04 48 8 [ 64.330753] RIP: rdma_join_multicast+0x26e/0x12c0 RSP: ffff8801c8207860 [ 64.332979] CR2: 00000000000000b0 [ 64.335550] ---[ end trace 0c00c17a408849c1 ]--- Reported-by: <syzbot+e6aba77967bd72cbc9d6@syzkaller.appspotmail.com> Fixes: c8f6a36 ("RDMA/cma: Add multicast communication support") Signed-off-by: Leon Romanovsky <leonro@mellanox.com> Reviewed-by: Sean Hefty <sean.hefty@intel.com> Signed-off-by: Doug Ledford <dledford@redhat.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

commit 0c81ffc upstream. Users can provide garbage while calling to ucma_join_ip_multicast(), it will indirectly cause to rdma_addr_size() return 0, making the call to ucma_process_join(), which had the right checks, but it is better to check the input as early as possible. The following crash from syzkaller revealed it. kernel BUG at lib/string.c:1052! invalid opcode: 0000 [#1] SMP KASAN Dumping ftrace buffer: (ftrace buffer empty) Modules linked in: CPU: 0 PID: 4113 Comm: syz-executor0 Not tainted 4.16.0-rc5+ Freescale#261 Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/01/2011 RIP: 0010:fortify_panic+0x13/0x20 lib/string.c:1051 RSP: 0018:ffff8801ca81f8f0 EFLAGS: 00010286 RAX: 0000000000000022 RBX: 1ffff10039503f23 RCX: 0000000000000000 RDX: 0000000000000022 RSI: 1ffff10039503ed3 RDI: ffffed0039503f12 RBP: ffff8801ca81f8f0 R08: 0000000000000000 R09: 0000000000000000 R10: 0000000000000006 R11: 0000000000000000 R12: ffff8801ca81f998 R13: ffff8801ca81f938 R14: ffff8801ca81fa58 R15: 000000000000fa00 FS: 0000000000000000(0000) GS:ffff8801db200000(0063) knlGS:000000000a12a900 CS: 0010 DS: 002b ES: 002b CR0: 0000000080050033 CR2: 0000000008138024 CR3: 00000001cbb58004 CR4: 00000000001606f0 DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 Call Trace: memcpy include/linux/string.h:344 [inline] ucma_join_ip_multicast+0x36b/0x3b0 drivers/infiniband/core/ucma.c:1421 ucma_write+0x2d6/0x3d0 drivers/infiniband/core/ucma.c:1633 __vfs_write+0xef/0x970 fs/read_write.c:480 vfs_write+0x189/0x510 fs/read_write.c:544 SYSC_write fs/read_write.c:589 [inline] SyS_write+0xef/0x220 fs/read_write.c:581 do_syscall_32_irqs_on arch/x86/entry/common.c:330 [inline] do_fast_syscall_32+0x3ec/0xf9f arch/x86/entry/common.c:392 entry_SYSENTER_compat+0x70/0x7f arch/x86/entry/entry_64_compat.S:139 RIP: 0023:0xf7f9ec99 RSP: 002b:00000000ff8172cc EFLAGS: 00000282 ORIG_RAX: 0000000000000004 RAX: ffffffffffffffda RBX: 0000000000000003 RCX: 0000000020000100 RDX: 0000000000000063 RSI: 0000000000000000 RDI: 0000000000000000 RBP: 0000000000000000 R08: 0000000000000000 R09: 0000000000000000 R10: 0000000000000000 R11: 0000000000000000 R12: 0000000000000000 R13: 0000000000000000 R14: 0000000000000000 R15: 0000000000000000 Code: 08 5b 41 5c 41 5d 41 5e 41 5f 5d c3 0f 0b 48 89 df e8 42 2c e3 fb eb de 55 48 89 fe 48 c7 c7 80 75 98 86 48 89 e5 e8 85 95 94 fb <0f> 0b 90 90 90 90 90 90 90 90 90 90 90 55 48 89 e5 41 57 41 56 RIP: fortify_panic+0x13/0x20 lib/string.c:1051 RSP: ffff8801ca81f8f0 Fixes: 5bc2b7b ("RDMA/ucma: Allow user space to specify AF_IB when joining multicast") Reported-by: <syzbot+2287ac532caa81900a4e@syzkaller.appspotmail.com> Signed-off-by: Leon Romanovsky <leonro@mellanox.com> Reviewed-by: Sean Hefty <sean.hefty@intel.com> Signed-off-by: Doug Ledford <dledford@redhat.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

commit 058f58e upstream. syzkaller reported a crash in ata_bmdma_fill_sg() when writing to /dev/sg1. The immediate cause was that the ATA command's scatterlist was not DMA-mapped, which causes 'pi - 1' to underflow, resulting in a write to 'qc->ap->bmdma_prd[0xffffffff]'. Strangely though, the flag ATA_QCFLAG_DMAMAP was set in qc->flags. The root cause is that when __ata_scsi_queuecmd() is preparing to relay a SCSI command to an ATAPI device, it doesn't correctly validate the CDB length before copying it into the 16-byte buffer 'cdb' in 'struct ata_queued_cmd'. Namely, it validates the fixed CDB length expected based on the SCSI opcode but not the actual CDB length, which can be larger due to the use of the SG_NEXT_CMD_LEN ioctl. Since 'flags' is the next member in ata_queued_cmd, a buffer overflow corrupts it. Fix it by requiring that the actual CDB length be <= 16 (ATAPI_CDB_LEN). [Really it seems the length should be required to be <= dev->cdb_len, but the current behavior seems to have been intentionally introduced by commit 607126c ("libata-scsi: be tolerant of 12-byte ATAPI commands in 16-byte CDBs") to work around a userspace bug in mplayer. Probably the workaround is no longer needed (mplayer was fixed in 2007), but continuing to allow lengths to up 16 appears harmless for now.] Here's a reproducer that works in QEMU when /dev/sg1 refers to the CD-ROM drive that qemu-system-x86_64 creates by default: #include <fcntl.h> #include <sys/ioctl.h> #include <unistd.h> #define SG_NEXT_CMD_LEN 0x2283 int main() { char buf[53] = { [36] = 0x7e, [52] = 0x02 }; int fd = open("/dev/sg1", O_RDWR); ioctl(fd, SG_NEXT_CMD_LEN, &(int){ 17 }); write(fd, buf, sizeof(buf)); } The crash was: BUG: unable to handle kernel paging request at ffff8cb97db37ffc IP: ata_bmdma_fill_sg drivers/ata/libata-sff.c:2623 [inline] IP: ata_bmdma_qc_prep+0xa4/0xc0 drivers/ata/libata-sff.c:2727 PGD fb6c067 P4D fb6c067 PUD 0 Oops: 0002 [#1] SMP CPU: 1 PID: 150 Comm: syz_ata_bmdma_q Not tainted 4.15.0-next-20180202 Freescale#99 Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.11.0-20171110_100015-anatol 04/01/2014 [...] Call Trace: ata_qc_issue+0x100/0x1d0 drivers/ata/libata-core.c:5421 ata_scsi_translate+0xc9/0x1a0 drivers/ata/libata-scsi.c:2024 __ata_scsi_queuecmd drivers/ata/libata-scsi.c:4326 [inline] ata_scsi_queuecmd+0x8c/0x210 drivers/ata/libata-scsi.c:4375 scsi_dispatch_cmd+0xa2/0xe0 drivers/scsi/scsi_lib.c:1727 scsi_request_fn+0x24c/0x530 drivers/scsi/scsi_lib.c:1865 __blk_run_queue_uncond block/blk-core.c:412 [inline] __blk_run_queue+0x3a/0x60 block/blk-core.c:432 blk_execute_rq_nowait+0x93/0xc0 block/blk-exec.c:78 sg_common_write.isra.7+0x272/0x5a0 drivers/scsi/sg.c:806 sg_write+0x1ef/0x340 drivers/scsi/sg.c:677 __vfs_write+0x31/0x160 fs/read_write.c:480 vfs_write+0xa7/0x160 fs/read_write.c:544 SYSC_write fs/read_write.c:589 [inline] SyS_write+0x4d/0xc0 fs/read_write.c:581 do_syscall_64+0x5e/0x110 arch/x86/entry/common.c:287 entry_SYSCALL_64_after_hwframe+0x21/0x86 Fixes: 607126c ("libata-scsi: be tolerant of 12-byte ATAPI commands in 16-byte CDBs") Reported-by: syzbot+1ff6f9fcc3c35f1c72a95e26528c8e7e3276e4da@syzkaller.appspotmail.com Cc: <stable@vger.kernel.org> # v2.6.24+ Signed-off-by: Eric Biggers <ebiggers@google.com> Signed-off-by: Tejun Heo <tj@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

commit 87e0d4f upstream. Prasad reported that he has seen crashes in BPF subsystem with netd on Android with arm64 in the form of (note, the taint is unrelated): [ 4134.721483] Unable to handle kernel paging request at virtual address 800000001 [ 4134.820925] Mem abort info: [ 4134.901283] Exception class = DABT (current EL), IL = 32 bits [ 4135.016736] SET = 0, FnV = 0 [ 4135.119820] EA = 0, S1PTW = 0 [ 4135.201431] Data abort info: [ 4135.301388] ISV = 0, ISS = 0x00000021 [ 4135.359599] CM = 0, WnR = 0 [ 4135.470873] user pgtable: 4k pages, 39-bit VAs, pgd = ffffffe39b946000 [ 4135.499757] [0000000800000001] *pgd=0000000000000000, *pud=0000000000000000 [ 4135.660725] Internal error: Oops: 96000021 [#1] PREEMPT SMP [ 4135.674610] Modules linked in: [ 4135.682883] CPU: 5 PID: 1260 Comm: netd Tainted: G S W 4.14.19+ #1 [ 4135.716188] task: ffffffe39f4aa380 task.stack: ffffff801d4e0000 [ 4135.731599] PC is at bpf_prog_add+0x20/0x68 [ 4135.741746] LR is at bpf_prog_inc+0x20/0x2c [ 4135.751788] pc : [<ffffff94ab7ad584>] lr : [<ffffff94ab7ad638>] pstate: 60400145 [ 4135.769062] sp : ffffff801d4e3ce0 [...] [ 4136.258315] Process netd (pid: 1260, stack limit = 0xffffff801d4e0000) [ 4136.273746] Call trace: [...] [ 4136.442494] 3ca0: ffffff94ab7ad584 0000000060400145 ffffffe3a01bf8f8 0000000000000006 [ 4136.460936] 3cc0: 0000008000000000 ffffff94ab844204 ffffff801d4e3cf0 ffffff94ab7ad584 [ 4136.479241] [<ffffff94ab7ad584>] bpf_prog_add+0x20/0x68 [ 4136.491767] [<ffffff94ab7ad638>] bpf_prog_inc+0x20/0x2c [ 4136.504536] [<ffffff94ab7b5d08>] bpf_obj_get_user+0x204/0x22c [ 4136.518746] [<ffffff94ab7ade68>] SyS_bpf+0x5a8/0x1a88 Android's netd was basically pinning the uid cookie BPF map in BPF fs (/sys/fs/bpf/traffic_cookie_uid_map) and later on retrieving it again resulting in above panic. Issue is that the map was wrongly identified as a prog! Above kernel was compiled with clang 4.0, and it turns out that clang decided to merge the bpf_prog_iops and bpf_map_iops into a single memory location, such that the two i_ops could then not be distinguished anymore. Reason for this miscompilation is that clang has the more aggressive -fmerge-all-constants enabled by default. In fact, clang source code has a comment about it in lib/AST/ExprConstant.cpp on why it is okay to do so: Pointers with different bases cannot represent the same object. (Note that clang defaults to -fmerge-all-constants, which can lead to inconsistent results for comparisons involving the address of a constant; this generally doesn't matter in practice.) The issue never appeared with gcc however, since gcc does not enable -fmerge-all-constants by default and even *explicitly* states in it's option description that using this flag results in non-conforming behavior, quote from man gcc: Languages like C or C++ require each variable, including multiple instances of the same variable in recursive calls, to have distinct locations, so using this option results in non-conforming behavior. There are also various clang bug reports open on that matter [1], where clang developers acknowledge the non-conforming behavior, and refer to disabling it with -fno-merge-all-constants. But even if this gets fixed in clang today, there are already users out there that triggered this. Thus, fix this issue by explicitly adding -fno-merge-all-constants to the kernel's Makefile to generically disable this optimization, since potentially other places in the kernel could subtly break as well. Note, there is also a flag called -fmerge-constants (not supported by clang), which is more conservative and only applies to strings and it's enabled in gcc's -O/-O2/-O3/-Os optimization levels. In gcc's code, the two flags -fmerge-{all-,}constants share the same variable internally, so when disabling it via -fno-merge-all-constants, then we really don't merge any const data (e.g. strings), and text size increases with gcc (14,927,214 -> 14,942,646 for vmlinux.o). $ gcc -fverbose-asm -O2 foo.c -S -o foo.S -> foo.S lists -fmerge-constants under options enabled $ gcc -fverbose-asm -O2 -fno-merge-all-constants foo.c -S -o foo.S -> foo.S doesn't list -fmerge-constants under options enabled $ gcc -fverbose-asm -O2 -fno-merge-all-constants -fmerge-constants foo.c -S -o foo.S -> foo.S lists -fmerge-constants under options enabled Thus, as a workaround we need to set both -fno-merge-all-constants *and* -fmerge-constants in the Makefile in order for text size to stay as is. [1] https://bugs.llvm.org/show_bug.cgi?id=18538 Reported-by: Prasad Sodagudi <psodagud@codeaurora.org> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Chenbo Feng <fengc@google.com> Cc: Richard Smith <richard-llvm@metafoo.co.uk> Cc: Chandler Carruth <chandlerc@gmail.com> Cc: linux-kernel@vger.kernel.org Tested-by: Prasad Sodagudi <psodagud@codeaurora.org> Acked-by: Alexei Starovoitov <ast@kernel.org> Signed-off-by: Alexei Starovoitov <ast@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

…specified [ Upstream commit 51d4740 ] If set/unset mode of the tunnel_key action is not provided, ->init() still returns 0, and the caller proceeds with bogus 'struct tc_action *' object, this results in crash: % tc actions add action tunnel_key src_ip 1.1.1.1 dst_ip 2.2.2.1 id 7 index 1 [ 35.805515] general protection fault: 0000 [#1] SMP PTI [ 35.806161] Modules linked in: act_tunnel_key kvm_intel kvm irqbypass crct10dif_pclmul crc32_pclmul ghash_clmulni_intel pcbc aesni_intel aes_x86_64 crypto_simd glue_helper cryptd serio_raw [ 35.808233] CPU: 1 PID: 428 Comm: tc Not tainted 4.16.0-rc4+ Freescale#286 [ 35.808929] RIP: 0010:tcf_action_init+0x90/0x190 [ 35.809457] RSP: 0018:ffffb8edc068b9a0 EFLAGS: 00010206 [ 35.810053] RAX: 1320c000000a0003 RBX: 0000000000000001 RCX: 0000000000000000 [ 35.810866] RDX: 0000000000000070 RSI: 0000000000007965 RDI: ffffb8edc068b910 [ 35.811660] RBP: ffffb8edc068b9d0 R08: 0000000000000000 R09: ffffb8edc068b808 [ 35.812463] R10: ffffffffc02bf040 R11: 0000000000000040 R12: ffffb8edc068bb38 [ 35.813235] R13: 0000000000000000 R14: 0000000000000000 R15: ffffb8edc068b910 [ 35.814006] FS: 00007f3d0d8556c0(0000) GS:ffff91d1dbc40000(0000) knlGS:0000000000000000 [ 35.814881] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 35.815540] CR2: 000000000043f720 CR3: 0000000019248001 CR4: 00000000001606a0 [ 35.816457] Call Trace: [ 35.817158] tc_ctl_action+0x11a/0x220 [ 35.817795] rtnetlink_rcv_msg+0x23d/0x2e0 [ 35.818457] ? __slab_alloc+0x1c/0x30 [ 35.819079] ? __kmalloc_node_track_caller+0xb1/0x2b0 [ 35.819544] ? rtnl_calcit.isra.30+0xe0/0xe0 [ 35.820231] netlink_rcv_skb+0xce/0x100 [ 35.820744] netlink_unicast+0x164/0x220 [ 35.821500] netlink_sendmsg+0x293/0x370 [ 35.822040] sock_sendmsg+0x30/0x40 [ 35.822508] ___sys_sendmsg+0x2c5/0x2e0 [ 35.823149] ? pagecache_get_page+0x27/0x220 [ 35.823714] ? filemap_fault+0xa2/0x640 [ 35.824423] ? page_add_file_rmap+0x108/0x200 [ 35.825065] ? alloc_set_pte+0x2aa/0x530 [ 35.825585] ? finish_fault+0x4e/0x70 [ 35.826140] ? __handle_mm_fault+0xbc1/0x10d0 [ 35.826723] ? __sys_sendmsg+0x41/0x70 [ 35.827230] __sys_sendmsg+0x41/0x70 [ 35.827710] do_syscall_64+0x68/0x120 [ 35.828195] entry_SYSCALL_64_after_hwframe+0x3d/0xa2 [ 35.828859] RIP: 0033:0x7f3d0ca4da67 [ 35.829331] RSP: 002b:00007ffc9f284338 EFLAGS: 00000246 ORIG_RAX: 000000000000002e [ 35.830304] RAX: ffffffffffffffda RBX: 00007ffc9f284460 RCX: 00007f3d0ca4da67 [ 35.831247] RDX: 0000000000000000 RSI: 00007ffc9f2843b0 RDI: 0000000000000003 [ 35.832167] RBP: 000000005aa6a7a9 R08: 0000000000000001 R09: 0000000000000000 [ 35.833075] R10: 00000000000005f1 R11: 0000000000000246 R12: 0000000000000000 [ 35.833997] R13: 00007ffc9f2884c0 R14: 0000000000000001 R15: 0000000000674640 [ 35.834923] Code: 24 30 bb 01 00 00 00 45 31 f6 eb 5e 8b 50 08 83 c2 07 83 e2 fc 83 c2 70 49 8b 07 48 8b 40 70 48 85 c0 74 10 48 89 14 24 4c 89 ff <ff> d0 48 8b 14 24 48 01 c2 49 01 d6 45 85 ed 74 05 41 83 47 2c [ 35.837442] RIP: tcf_action_init+0x90/0x190 RSP: ffffb8edc068b9a0 [ 35.838291] ---[ end trace a095c06ee4b97a26 ]--- Fixes: d0f6dd8 ("net/sched: Introduce act_tunnel_key") Signed-off-by: Roman Mashak <mrv@mojatatu.com> Acked-by: Cong Wang <xiyou.wangcong@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

commit 87a73eb upstream. It turns out that the loop where we read manufacturer jedec_read_mfd() can under some circumstances get a CFI_MFR_CONTINUATION repeatedly, making the loop go over all banks and eventually hit the end of the map and crash because of an access violation: Unable to handle kernel paging request at virtual address c4980000 pgd = (ptrval) [c4980000] *pgd=03808811, *pte=00000000, *ppte=00000000 Internal error: Oops: 7 [#1] PREEMPT ARM CPU: 0 PID: 1 Comm: swapper Not tainted 4.16.0-rc1+ Freescale#150 Hardware name: Gemini (Device Tree) PC is at jedec_probe_chip+0x6ec/0xcd0 LR is at 0x4 pc : [<c03a2bf4>] lr : [<00000004>] psr: 60000013 sp : c382dd18 ip : 0000ffff fp : 00000000 r10: c0626388 r9 : 00020000 r8 : c0626340 r7 : 00000000 r6 : 00000001 r5 : c3a71afc r4 : c382dd70 r3 : 00000001 r2 : c4900000 r1 : 00000002 r0 : 00080000 Flags: nZCv IRQs on FIQs on Mode SVC_32 ISA ARM Segment none Control: 0000397f Table: 00004000 DAC: 00000053 Process swapper (pid: 1, stack limit = 0x(ptrval)) Fix this by breaking the loop with a return 0 if the offset exceeds the map size. Fixes: 5c9c11e ("[MTD] [NOR] Add support for flash chips with ID in bank other than 0") Cc: <stable@vger.kernel.org> Signed-off-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Boris Brezillon <boris.brezillon@bootlin.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

commit 3d942ee upstream. If System V shmget/shmat operations are used to create a hugetlbfs backed mapping, it is possible to munmap part of the mapping and split the underlying vma such that it is not huge page aligned. This will untimately result in the following BUG: kernel BUG at /build/linux-jWa1Fv/linux-4.15.0/mm/hugetlb.c:3310! Oops: Exception in kernel mode, sig: 5 [#1] LE SMP NR_CPUS=2048 NUMA PowerNV Modules linked in: kcm nfc af_alg caif_socket caif phonet fcrypt CPU: 18 PID: 43243 Comm: trinity-subchil Tainted: G C E 4.15.0-10-generic SolidRun#11-Ubuntu NIP: c00000000036e764 LR: c00000000036ee48 CTR: 0000000000000009 REGS: c000003fbcdcf810 TRAP: 0700 Tainted: G C E (4.15.0-10-generic) MSR: 9000000000029033 <SF,HV,EE,ME,IR,DR,RI,LE> CR: 24002222 XER: 20040000 CFAR: c00000000036ee44 SOFTE: 1 NIP __unmap_hugepage_range+0xa4/0x760 LR __unmap_hugepage_range_final+0x28/0x50 Call Trace: 0x7115e4e00000 (unreliable) __unmap_hugepage_range_final+0x28/0x50 unmap_single_vma+0x11c/0x190 unmap_vmas+0x94/0x140 exit_mmap+0x9c/0x1d0 mmput+0xa8/0x1d0 do_exit+0x360/0xc80 do_group_exit+0x60/0x100 SyS_exit_group+0x24/0x30 system_call+0x58/0x6c ---[ end trace ee88f958a1c62605 ]--- This bug was introduced by commit 31383c6 ("mm, hugetlbfs: introduce ->split() to vm_operations_struct"). A split function was added to vm_operations_struct to determine if a mapping can be split. This was mostly for device-dax and hugetlbfs mappings which have specific alignment constraints. Mappings initiated via shmget/shmat have their original vm_ops overwritten with shm_vm_ops. shm_vm_ops functions will call back to the original vm_ops if needed. Add such a split function to shm_vm_ops. Link: http://lkml.kernel.org/r/20180321161314.7711-1-mike.kravetz@oracle.com Fixes: 31383c6 ("mm, hugetlbfs: introduce ->split() to vm_operations_struct") Signed-off-by: Mike Kravetz <mike.kravetz@oracle.com> Reported-by: Laurent Dufour <ldufour@linux.vnet.ibm.com> Reviewed-by: Laurent Dufour <ldufour@linux.vnet.ibm.com> Tested-by: Laurent Dufour <ldufour@linux.vnet.ibm.com> Reviewed-by: Dan Williams <dan.j.williams@intel.com> Acked-by: Michal Hocko <mhocko@suse.com> Cc: Davidlohr Bueso <dave@stgolabs.net> Cc: Manfred Spraul <manfred@colorfullife.com> Cc: <stable@vger.kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

commit 2975d5d upstream. Garbage supplied by user will cause to UCMA module provide zero memory size for memcpy(), because it wasn't checked, it will produce unpredictable results in rdma_resolve_addr(). [ 42.873814] BUG: KASAN: null-ptr-deref in rdma_resolve_addr+0xc8/0xfb0 [ 42.874816] Write of size 28 at addr 00000000000000a0 by task resaddr/1044 [ 42.876765] [ 42.876960] CPU: 1 PID: 1044 Comm: resaddr Not tainted 4.16.0-rc1-00057-gaa56a5293d7e SolidRun#34 [ 42.877840] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS rel-1.11.0-0-g63451fca13-prebuilt.qemu-project.org 04/01/2014 [ 42.879691] Call Trace: [ 42.880236] dump_stack+0x5c/0x77 [ 42.880664] kasan_report+0x163/0x380 [ 42.881354] ? rdma_resolve_addr+0xc8/0xfb0 [ 42.881864] memcpy+0x34/0x50 [ 42.882692] rdma_resolve_addr+0xc8/0xfb0 [ 42.883366] ? deref_stack_reg+0x88/0xd0 [ 42.883856] ? vsnprintf+0x31a/0x770 [ 42.884686] ? rdma_bind_addr+0xc40/0xc40 [ 42.885327] ? num_to_str+0x130/0x130 [ 42.885773] ? deref_stack_reg+0x88/0xd0 [ 42.886217] ? __read_once_size_nocheck.constprop.6+0x10/0x10 [ 42.887698] ? unwind_get_return_address_ptr+0x50/0x50 [ 42.888302] ? replace_slot+0x147/0x170 [ 42.889176] ? delete_node+0x12c/0x340 [ 42.890223] ? __radix_tree_lookup+0xa9/0x160 [ 42.891196] ? ucma_resolve_ip+0xb7/0x110 [ 42.891917] ucma_resolve_ip+0xb7/0x110 [ 42.893003] ? ucma_resolve_addr+0x190/0x190 [ 42.893531] ? _copy_from_user+0x5e/0x90 [ 42.894204] ucma_write+0x174/0x1f0 [ 42.895162] ? ucma_resolve_route+0xf0/0xf0 [ 42.896309] ? dequeue_task_fair+0x67e/0xd90 [ 42.897192] ? put_prev_entity+0x7d/0x170 [ 42.897870] ? ring_buffer_record_is_on+0xd/0x20 [ 42.898439] ? tracing_record_taskinfo_skip+0x20/0x50 [ 42.899686] __vfs_write+0xc4/0x350 [ 42.900142] ? kernel_read+0xa0/0xa0 [ 42.900602] ? firmware_map_remove+0xdf/0xdf [ 42.901135] ? do_task_dead+0x5d/0x60 [ 42.901598] ? do_exit+0xcc6/0x1220 [ 42.902789] ? __fget+0xa8/0xf0 [ 42.903190] vfs_write+0xf7/0x280 [ 42.903600] SyS_write+0xa1/0x120 [ 42.904206] ? SyS_read+0x120/0x120 [ 42.905710] ? compat_start_thread+0x60/0x60 [ 42.906423] ? SyS_read+0x120/0x120 [ 42.908716] do_syscall_64+0xeb/0x250 [ 42.910760] entry_SYSCALL_64_after_hwframe+0x21/0x86 [ 42.912735] RIP: 0033:0x7f138b0afe99 [ 42.914734] RSP: 002b:00007f138b799e98 EFLAGS: 00000287 ORIG_RAX: 0000000000000001 [ 42.917134] RAX: ffffffffffffffda RBX: 0000000000000000 RCX: 00007f138b0afe99 [ 42.919487] RDX: 000000000000002e RSI: 0000000020000c40 RDI: 0000000000000004 [ 42.922393] RBP: 00007f138b799ec0 R08: 00007f138b79a700 R09: 0000000000000000 [ 42.925266] R10: 00007f138b79a700 R11: 0000000000000287 R12: 00007f138b799fc0 [ 42.927570] R13: 0000000000000000 R14: 00007ffdbae757c0 R15: 00007f138b79a9c0 [ 42.930047] [ 42.932681] Disabling lock debugging due to kernel taint [ 42.934795] BUG: unable to handle kernel NULL pointer dereference at 00000000000000a0 [ 42.936939] IP: memcpy_erms+0x6/0x10 [ 42.938864] PGD 80000001bea92067 P4D 80000001bea92067 PUD 1bea96067 PMD 0 [ 42.941576] Oops: 0002 [#1] SMP KASAN PTI [ 42.943952] CPU: 1 PID: 1044 Comm: resaddr Tainted: G B 4.16.0-rc1-00057-gaa56a5293d7e SolidRun#34 [ 42.946964] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS rel-1.11.0-0-g63451fca13-prebuilt.qemu-project.org 04/01/2014 [ 42.952336] RIP: 0010:memcpy_erms+0x6/0x10 [ 42.954707] RSP: 0018:ffff8801c8b479c8 EFLAGS: 00010286 [ 42.957227] RAX: 00000000000000a0 RBX: ffff8801c8b47ba0 RCX: 000000000000001c [ 42.960543] RDX: 000000000000001c RSI: ffff8801c8b47bbc RDI: 00000000000000a0 [ 42.963867] RBP: ffff8801c8b47b60 R08: 0000000000000000 R09: ffffed0039168ed1 [ 42.967303] R10: 0000000000000001 R11: ffffed0039168ed0 R12: ffff8801c8b47bbc [ 42.970685] R13: 00000000000000a0 R14: 1ffff10039168f4a R15: 0000000000000000 [ 42.973631] FS: 00007f138b79a700(0000) GS:ffff8801e5d00000(0000) knlGS:0000000000000000 [ 42.976831] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 42.979239] CR2: 00000000000000a0 CR3: 00000001be908002 CR4: 00000000003606a0 [ 42.982060] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 [ 42.984877] DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 [ 42.988033] Call Trace: [ 42.990487] rdma_resolve_addr+0xc8/0xfb0 [ 42.993202] ? deref_stack_reg+0x88/0xd0 [ 42.996055] ? vsnprintf+0x31a/0x770 [ 42.998707] ? rdma_bind_addr+0xc40/0xc40 [ 43.000985] ? num_to_str+0x130/0x130 [ 43.003410] ? deref_stack_reg+0x88/0xd0 [ 43.006302] ? __read_once_size_nocheck.constprop.6+0x10/0x10 [ 43.008780] ? unwind_get_return_address_ptr+0x50/0x50 [ 43.011178] ? replace_slot+0x147/0x170 [ 43.013517] ? delete_node+0x12c/0x340 [ 43.016019] ? __radix_tree_lookup+0xa9/0x160 [ 43.018755] ? ucma_resolve_ip+0xb7/0x110 [ 43.021270] ucma_resolve_ip+0xb7/0x110 [ 43.023968] ? ucma_resolve_addr+0x190/0x190 [ 43.026312] ? _copy_from_user+0x5e/0x90 [ 43.029384] ucma_write+0x174/0x1f0 [ 43.031861] ? ucma_resolve_route+0xf0/0xf0 [ 43.034782] ? dequeue_task_fair+0x67e/0xd90 [ 43.037483] ? put_prev_entity+0x7d/0x170 [ 43.040215] ? ring_buffer_record_is_on+0xd/0x20 [ 43.042990] ? tracing_record_taskinfo_skip+0x20/0x50 [ 43.045595] __vfs_write+0xc4/0x350 [ 43.048624] ? kernel_read+0xa0/0xa0 [ 43.051604] ? firmware_map_remove+0xdf/0xdf [ 43.055379] ? do_task_dead+0x5d/0x60 [ 43.058000] ? do_exit+0xcc6/0x1220 [ 43.060783] ? __fget+0xa8/0xf0 [ 43.063133] vfs_write+0xf7/0x280 [ 43.065677] SyS_write+0xa1/0x120 [ 43.068647] ? SyS_read+0x120/0x120 [ 43.071179] ? compat_start_thread+0x60/0x60 [ 43.074025] ? SyS_read+0x120/0x120 [ 43.076705] do_syscall_64+0xeb/0x250 [ 43.079006] entry_SYSCALL_64_after_hwframe+0x21/0x86 [ 43.081606] RIP: 0033:0x7f138b0afe99 [ 43.083679] RSP: 002b:00007f138b799e98 EFLAGS: 00000287 ORIG_RAX: 0000000000000001 [ 43.086802] RAX: ffffffffffffffda RBX: 0000000000000000 RCX: 00007f138b0afe99 [ 43.089989] RDX: 000000000000002e RSI: 0000000020000c40 RDI: 0000000000000004 [ 43.092866] RBP: 00007f138b799ec0 R08: 00007f138b79a700 R09: 0000000000000000 [ 43.096233] R10: 00007f138b79a700 R11: 0000000000000287 R12: 00007f138b799fc0 [ 43.098913] R13: 0000000000000000 R14: 00007ffdbae757c0 R15: 00007f138b79a9c0 [ 43.101809] Code: 90 90 90 90 90 eb 1e 0f 1f 00 48 89 f8 48 89 d1 48 c1 e9 03 83 e2 07 f3 48 a5 89 d1 f3 a4 c3 66 0f 1f 44 00 00 48 89 f8 48 89 d1 <f3> a4 c3 0f 1f 80 00 00 00 00 48 89 f8 48 83 fa 20 72 7e 40 38 [ 43.107950] RIP: memcpy_erms+0x6/0x10 RSP: ffff8801c8b479c8 Reported-by: <syzbot+1d8c43206853b369d00c@syzkaller.appspotmail.com> Fixes: 7521663 ("RDMA/cma: Export rdma cm interface to userspace") Signed-off-by: Leon Romanovsky <leonro@mellanox.com> Reviewed-by: Sean Hefty <sean.hefty@intel.com> Signed-off-by: Jason Gunthorpe <jgg@mellanox.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

commit e8980d6 upstream. Prior to access UCMA commands, the context should be initialized and connected to CM_ID with ucma_create_id(). In case user skips this step, he can provide non-valid ctx without CM_ID and cause to multiple NULL dereferences. Also there are situations where the create_id can be raced with other user access, ensure that the context is only shared to other threads once it is fully initialized to avoid the races. [ 109.088108] BUG: unable to handle kernel NULL pointer dereference at 0000000000000020 [ 109.090315] IP: ucma_connect+0x138/0x1d0 [ 109.092595] PGD 80000001dc02d067 P4D 80000001dc02d067 PUD 1da9ef067 PMD 0 [ 109.095384] Oops: 0000 [#1] SMP KASAN PTI [ 109.097834] CPU: 0 PID: 663 Comm: uclose Tainted: G B 4.16.0-rc1-00062-g2975d5de6428 SolidRun#45 [ 109.100816] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS rel-1.11.0-0-g63451fca13-prebuilt.qemu-project.org 04/01/2014 [ 109.105943] RIP: 0010:ucma_connect+0x138/0x1d0 [ 109.108850] RSP: 0018:ffff8801c8567a80 EFLAGS: 00010246 [ 109.111484] RAX: 0000000000000000 RBX: 1ffff100390acf50 RCX: ffffffff9d7812e2 [ 109.114496] RDX: 1ffffffff3f507a5 RSI: 0000000000000297 RDI: 0000000000000297 [ 109.117490] RBP: ffff8801daa15600 R08: 0000000000000000 R09: ffffed00390aceeb [ 109.120429] R10: 0000000000000001 R11: ffffed00390aceea R12: 0000000000000000 [ 109.123318] R13: 0000000000000120 R14: ffff8801de6459c0 R15: 0000000000000118 [ 109.126221] FS: 00007fabb68d6700(0000) GS:ffff8801e5c00000(0000) knlGS:0000000000000000 [ 109.129468] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 109.132523] CR2: 0000000000000020 CR3: 00000001d45d8003 CR4: 00000000003606b0 [ 109.135573] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 [ 109.138716] DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 [ 109.142057] Call Trace: [ 109.144160] ? ucma_listen+0x110/0x110 [ 109.146386] ? wake_up_q+0x59/0x90 [ 109.148853] ? futex_wake+0x10b/0x2a0 [ 109.151297] ? save_stack+0x89/0xb0 [ 109.153489] ? _copy_from_user+0x5e/0x90 [ 109.155500] ucma_write+0x174/0x1f0 [ 109.157933] ? ucma_resolve_route+0xf0/0xf0 [ 109.160389] ? __mod_node_page_state+0x1d/0x80 [ 109.162706] __vfs_write+0xc4/0x350 [ 109.164911] ? kernel_read+0xa0/0xa0 [ 109.167121] ? path_openat+0x1b10/0x1b10 [ 109.169355] ? fsnotify+0x899/0x8f0 [ 109.171567] ? fsnotify_unmount_inodes+0x170/0x170 [ 109.174145] ? __fget+0xa8/0xf0 [ 109.177110] vfs_write+0xf7/0x280 [ 109.179532] SyS_write+0xa1/0x120 [ 109.181885] ? SyS_read+0x120/0x120 [ 109.184482] ? compat_start_thread+0x60/0x60 [ 109.187124] ? SyS_read+0x120/0x120 [ 109.189548] do_syscall_64+0xeb/0x250 [ 109.192178] entry_SYSCALL_64_after_hwframe+0x21/0x86 [ 109.194725] RIP: 0033:0x7fabb61ebe99 [ 109.197040] RSP: 002b:00007fabb68d5e98 EFLAGS: 00000202 ORIG_RAX: 0000000000000001 [ 109.200294] RAX: ffffffffffffffda RBX: 0000000000000000 RCX: 00007fabb61ebe99 [ 109.203399] RDX: 0000000000000120 RSI: 00000000200001c0 RDI: 0000000000000004 [ 109.206548] RBP: 00007fabb68d5ec0 R08: 0000000000000000 R09: 0000000000000000 [ 109.209902] R10: 0000000000000000 R11: 0000000000000202 R12: 00007fabb68d5fc0 [ 109.213327] R13: 0000000000000000 R14: 00007fff40ab2430 R15: 00007fabb68d69c0 [ 109.216613] Code: 88 44 24 2c 0f b6 84 24 6e 01 00 00 88 44 24 2d 0f b6 84 24 69 01 00 00 88 44 24 2e 8b 44 24 60 89 44 24 30 e8 da f6 06 ff 31 c0 <66> 41 83 7c 24 20 1b 75 04 8b 44 24 64 48 8d 74 24 20 4c 89 e7 [ 109.223602] RIP: ucma_connect+0x138/0x1d0 RSP: ffff8801c8567a80 [ 109.226256] CR2: 0000000000000020 Fixes: 7521663 ("RDMA/cma: Export rdma cm interface to userspace") Reported-by: <syzbot+36712f50b0552615bf59@syzkaller.appspotmail.com> Signed-off-by: Leon Romanovsky <leonro@mellanox.com> Signed-off-by: Jason Gunthorpe <jgg@mellanox.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

commit 5c64576 upstream. syzkaller reports for wrong rtnl_lock usage in sync code [1] and [2] We have 2 problems in start_sync_thread if error path is taken, eg. on memory allocation error or failure to configure sockets for mcast group or addr/port binding: 1. recursive locking: holding rtnl_lock while calling sock_release which in turn calls again rtnl_lock in ip_mc_drop_socket to leave the mcast group, as noticed by Florian Westphal. Additionally, sock_release can not be called while holding sync_mutex (ABBA deadlock). 2. task hung: holding rtnl_lock while calling kthread_stop to stop the running kthreads. As the kthreads do the same to leave the mcast group (sock_release -> ip_mc_drop_socket -> rtnl_lock) they hang. Fix the problems by calling rtnl_unlock early in the error path, now sock_release is called after unlocking both mutexes. Problem 3 (task hung reported by syzkaller [2]) is variant of problem 2: use _trylock to prevent one user to call rtnl_lock and then while waiting for sync_mutex to block kthreads that execute sock_release when they are stopped by stop_sync_thread. [1] IPVS: stopping backup sync thread 4500 ... WARNING: possible recursive locking detected 4.16.0-rc7+ SolidRun#3 Not tainted -------------------------------------------- syzkaller688027/4497 is trying to acquire lock: (rtnl_mutex){+.+.}, at: [<00000000bb14d7fb>] rtnl_lock+0x17/0x20 net/core/rtnetlink.c:74 but task is already holding lock: IPVS: stopping backup sync thread 4495 ... (rtnl_mutex){+.+.}, at: [<00000000bb14d7fb>] rtnl_lock+0x17/0x20 net/core/rtnetlink.c:74 other info that might help us debug this: Possible unsafe locking scenario: CPU0 ---- lock(rtnl_mutex); lock(rtnl_mutex); *** DEADLOCK *** May be due to missing lock nesting notation 2 locks held by syzkaller688027/4497: #0: (rtnl_mutex){+.+.}, at: [<00000000bb14d7fb>] rtnl_lock+0x17/0x20 net/core/rtnetlink.c:74 #1: (ipvs->sync_mutex){+.+.}, at: [<00000000703f78e3>] do_ip_vs_set_ctl+0x10f8/0x1cc0 net/netfilter/ipvs/ip_vs_ctl.c:2388 stack backtrace: CPU: 1 PID: 4497 Comm: syzkaller688027 Not tainted 4.16.0-rc7+ SolidRun#3 Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/01/2011 Call Trace: __dump_stack lib/dump_stack.c:17 [inline] dump_stack+0x194/0x24d lib/dump_stack.c:53 print_deadlock_bug kernel/locking/lockdep.c:1761 [inline] check_deadlock kernel/locking/lockdep.c:1805 [inline] validate_chain kernel/locking/lockdep.c:2401 [inline] __lock_acquire+0xe8f/0x3e00 kernel/locking/lockdep.c:3431 lock_acquire+0x1d5/0x580 kernel/locking/lockdep.c:3920 __mutex_lock_common kernel/locking/mutex.c:756 [inline] __mutex_lock+0x16f/0x1a80 kernel/locking/mutex.c:893 mutex_lock_nested+0x16/0x20 kernel/locking/mutex.c:908 rtnl_lock+0x17/0x20 net/core/rtnetlink.c:74 ip_mc_drop_socket+0x88/0x230 net/ipv4/igmp.c:2643 inet_release+0x4e/0x1c0 net/ipv4/af_inet.c:413 sock_release+0x8d/0x1e0 net/socket.c:595 start_sync_thread+0x2213/0x2b70 net/netfilter/ipvs/ip_vs_sync.c:1924 do_ip_vs_set_ctl+0x1139/0x1cc0 net/netfilter/ipvs/ip_vs_ctl.c:2389 nf_sockopt net/netfilter/nf_sockopt.c:106 [inline] nf_setsockopt+0x67/0xc0 net/netfilter/nf_sockopt.c:115 ip_setsockopt+0x97/0xa0 net/ipv4/ip_sockglue.c:1261 udp_setsockopt+0x45/0x80 net/ipv4/udp.c:2406 sock_common_setsockopt+0x95/0xd0 net/core/sock.c:2975 SYSC_setsockopt net/socket.c:1849 [inline] SyS_setsockopt+0x189/0x360 net/socket.c:1828 do_syscall_64+0x281/0x940 arch/x86/entry/common.c:287 entry_SYSCALL_64_after_hwframe+0x42/0xb7 RIP: 0033:0x446a69 RSP: 002b:00007fa1c3a64da8 EFLAGS: 00000246 ORIG_RAX: 0000000000000036 RAX: ffffffffffffffda RBX: 0000000000000000 RCX: 0000000000446a69 RDX: 000000000000048b RSI: 0000000000000000 RDI: 0000000000000003 RBP: 00000000006e29fc R08: 0000000000000018 R09: 0000000000000000 R10: 00000000200000c0 R11: 0000000000000246 R12: 00000000006e29f8 R13: 00676e697279656b R14: 00007fa1c3a659c0 R15: 00000000006e2b60 [2] IPVS: sync thread started: state = BACKUP, mcast_ifn = syz_tun, syncid = 4, id = 0 IPVS: stopping backup sync thread 25415 ... INFO: task syz-executor7:25421 blocked for more than 120 seconds. Not tainted 4.16.0-rc6+ Freescale#284 "echo 0 > /proc/sys/kernel/hung_task_timeout_secs" disables this message. syz-executor7 D23688 25421 4408 0x00000004 Call Trace: context_switch kernel/sched/core.c:2862 [inline] __schedule+0x8fb/0x1ec0 kernel/sched/core.c:3440 schedule+0xf5/0x430 kernel/sched/core.c:3499 schedule_timeout+0x1a3/0x230 kernel/time/timer.c:1777 do_wait_for_common kernel/sched/completion.c:86 [inline] __wait_for_common kernel/sched/completion.c:107 [inline] wait_for_common kernel/sched/completion.c:118 [inline] wait_for_completion+0x415/0x770 kernel/sched/completion.c:139 kthread_stop+0x14a/0x7a0 kernel/kthread.c:530 stop_sync_thread+0x3d9/0x740 net/netfilter/ipvs/ip_vs_sync.c:1996 do_ip_vs_set_ctl+0x2b1/0x1cc0 net/netfilter/ipvs/ip_vs_ctl.c:2394 nf_sockopt net/netfilter/nf_sockopt.c:106 [inline] nf_setsockopt+0x67/0xc0 net/netfilter/nf_sockopt.c:115 ip_setsockopt+0x97/0xa0 net/ipv4/ip_sockglue.c:1253 sctp_setsockopt+0x2ca/0x63e0 net/sctp/socket.c:4154 sock_common_setsockopt+0x95/0xd0 net/core/sock.c:3039 SYSC_setsockopt net/socket.c:1850 [inline] SyS_setsockopt+0x189/0x360 net/socket.c:1829 do_syscall_64+0x281/0x940 arch/x86/entry/common.c:287 entry_SYSCALL_64_after_hwframe+0x42/0xb7 RIP: 0033:0x454889 RSP: 002b:00007fc927626c68 EFLAGS: 00000246 ORIG_RAX: 0000000000000036 RAX: ffffffffffffffda RBX: 00007fc9276276d4 RCX: 0000000000454889 RDX: 000000000000048c RSI: 0000000000000000 RDI: 0000000000000017 RBP: 000000000072bf58 R08: 0000000000000018 R09: 0000000000000000 R10: 0000000020000000 R11: 0000000000000246 R12: 00000000ffffffff R13: 000000000000051c R14: 00000000006f9b40 R15: 0000000000000001 Showing all locks held in the system: 2 locks held by khungtaskd/868: #0: (rcu_read_lock){....}, at: [<00000000a1a8f002>] check_hung_uninterruptible_tasks kernel/hung_task.c:175 [inline] #0: (rcu_read_lock){....}, at: [<00000000a1a8f002>] watchdog+0x1c5/0xd60 kernel/hung_task.c:249 #1: (tasklist_lock){.+.+}, at: [<0000000037c2f8f9>] debug_show_all_locks+0xd3/0x3d0 kernel/locking/lockdep.c:4470 1 lock held by rsyslogd/4247: #0: (&f->f_pos_lock){+.+.}, at: [<000000000d8d6983>] __fdget_pos+0x12b/0x190 fs/file.c:765 2 locks held by getty/4338: #0: (&tty->ldisc_sem){++++}, at: [<00000000bee98654>] ldsem_down_read+0x37/0x40 drivers/tty/tty_ldsem.c:365 #1: (&ldata->atomic_read_lock){+.+.}, at: [<00000000c1d180aa>] n_tty_read+0x2ef/0x1a40 drivers/tty/n_tty.c:2131 2 locks held by getty/4339: #0: (&tty->ldisc_sem){++++}, at: [<00000000bee98654>] ldsem_down_read+0x37/0x40 drivers/tty/tty_ldsem.c:365 #1: (&ldata->atomic_read_lock){+.+.}, at: [<00000000c1d180aa>] n_tty_read+0x2ef/0x1a40 drivers/tty/n_tty.c:2131 2 locks held by getty/4340: #0: (&tty->ldisc_sem){++++}, at: [<00000000bee98654>] ldsem_down_read+0x37/0x40 drivers/tty/tty_ldsem.c:365 #1: (&ldata->atomic_read_lock){+.+.}, at: [<00000000c1d180aa>] n_tty_read+0x2ef/0x1a40 drivers/tty/n_tty.c:2131 2 locks held by getty/4341: #0: (&tty->ldisc_sem){++++}, at: [<00000000bee98654>] ldsem_down_read+0x37/0x40 drivers/tty/tty_ldsem.c:365 #1: (&ldata->atomic_read_lock){+.+.}, at: [<00000000c1d180aa>] n_tty_read+0x2ef/0x1a40 drivers/tty/n_tty.c:2131 2 locks held by getty/4342: #0: (&tty->ldisc_sem){++++}, at: [<00000000bee98654>] ldsem_down_read+0x37/0x40 drivers/tty/tty_ldsem.c:365 #1: (&ldata->atomic_read_lock){+.+.}, at: [<00000000c1d180aa>] n_tty_read+0x2ef/0x1a40 drivers/tty/n_tty.c:2131 2 locks held by getty/4343: #0: (&tty->ldisc_sem){++++}, at: [<00000000bee98654>] ldsem_down_read+0x37/0x40 drivers/tty/tty_ldsem.c:365 #1: (&ldata->atomic_read_lock){+.+.}, at: [<00000000c1d180aa>] n_tty_read+0x2ef/0x1a40 drivers/tty/n_tty.c:2131 2 locks held by getty/4344: #0: (&tty->ldisc_sem){++++}, at: [<00000000bee98654>] ldsem_down_read+0x37/0x40 drivers/tty/tty_ldsem.c:365 #1: (&ldata->atomic_read_lock){+.+.}, at: [<00000000c1d180aa>] n_tty_read+0x2ef/0x1a40 drivers/tty/n_tty.c:2131 3 locks held by kworker/0:5/6494: #0: ((wq_completion)"%s"("ipv6_addrconf")){+.+.}, at: [<00000000a062b18e>] work_static include/linux/workqueue.h:198 [inline] #0: ((wq_completion)"%s"("ipv6_addrconf")){+.+.}, at: [<00000000a062b18e>] set_work_data kernel/workqueue.c:619 [inline] #0: ((wq_completion)"%s"("ipv6_addrconf")){+.+.}, at: [<00000000a062b18e>] set_work_pool_and_clear_pending kernel/workqueue.c:646 [inline] #0: ((wq_completion)"%s"("ipv6_addrconf")){+.+.}, at: [<00000000a062b18e>] process_one_work+0xb12/0x1bb0 kernel/workqueue.c:2084 #1: ((addr_chk_work).work){+.+.}, at: [<00000000278427d5>] process_one_work+0xb89/0x1bb0 kernel/workqueue.c:2088 SolidRun#2: (rtnl_mutex){+.+.}, at: [<00000000066e35ac>] rtnl_lock+0x17/0x20 net/core/rtnetlink.c:74 1 lock held by syz-executor7/25421: #0: (ipvs->sync_mutex){+.+.}, at: [<00000000d414a689>] do_ip_vs_set_ctl+0x277/0x1cc0 net/netfilter/ipvs/ip_vs_ctl.c:2393 2 locks held by syz-executor7/25427: #0: (rtnl_mutex){+.+.}, at: [<00000000066e35ac>] rtnl_lock+0x17/0x20 net/core/rtnetlink.c:74 #1: (ipvs->sync_mutex){+.+.}, at: [<00000000e6d48489>] do_ip_vs_set_ctl+0x10f8/0x1cc0 net/netfilter/ipvs/ip_vs_ctl.c:2388 1 lock held by syz-executor7/25435: #0: (rtnl_mutex){+.+.}, at: [<00000000066e35ac>] rtnl_lock+0x17/0x20 net/core/rtnetlink.c:74 1 lock held by ipvs-b:2:0/25415: #0: (rtnl_mutex){+.+.}, at: [<00000000066e35ac>] rtnl_lock+0x17/0x20 net/core/rtnetlink.c:74 Reported-and-tested-by: syzbot+a46d6abf9d56b1365a72@syzkaller.appspotmail.com Reported-and-tested-by: syzbot+5fe074c01b2032ce9618@syzkaller.appspotmail.com Fixes: e0b26cc ("ipvs: call rtnl_lock early") Signed-off-by: Julian Anastasov <ja@ssi.bg> Signed-off-by: Simon Horman <horms@verge.net.au> Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org> Cc: Zubin Mithra <zsm@chromium.org> Cc: Guenter Roeck <groeck@chromium.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

[ Upstream commit a8d7aa1 ] syzbot reported a crash in tasklet_action_common() caused by dccp. dccp needs to make sure socket wont disappear before tasklet handler has completed. This patch takes a reference on the socket when arming the tasklet, and moves the sock_put() from dccp_write_xmit_timer() to dccp_write_xmitlet() kernel BUG at kernel/softirq.c:514! invalid opcode: 0000 [#1] SMP KASAN Dumping ftrace buffer: (ftrace buffer empty) Modules linked in: CPU: 1 PID: 17 Comm: ksoftirqd/1 Not tainted 4.17.0-rc3+ SolidRun#30 Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/01/2011 RIP: 0010:tasklet_action_common.isra.19+0x6db/0x700 kernel/softirq.c:515 RSP: 0018:ffff8801d9b3faf8 EFLAGS: 00010246 dccp_close: ABORT with 65423 bytes unread RAX: 1ffff1003b367f6b RBX: ffff8801daf1f3f0 RCX: 0000000000000000 RDX: ffff8801cf895498 RSI: 0000000000000004 RDI: 0000000000000000 RBP: ffff8801d9b3fc40 R08: ffffed0039f12a95 R09: ffffed0039f12a94 dccp_close: ABORT with 65423 bytes unread R10: ffffed0039f12a94 R11: ffff8801cf8954a3 R12: 0000000000000000 R13: ffff8801d9b3fc18 R14: dffffc0000000000 R15: ffff8801cf895490 FS: 0000000000000000(0000) GS:ffff8801daf00000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 0000001b2bc28000 CR3: 00000001a08a9000 CR4: 00000000001406e0 DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 Call Trace: tasklet_action+0x1d/0x20 kernel/softirq.c:533 __do_softirq+0x2e0/0xaf5 kernel/softirq.c:285 dccp_close: ABORT with 65423 bytes unread run_ksoftirqd+0x86/0x100 kernel/softirq.c:646 smpboot_thread_fn+0x417/0x870 kernel/smpboot.c:164 kthread+0x345/0x410 kernel/kthread.c:238 ret_from_fork+0x3a/0x50 arch/x86/entry/entry_64.S:412 Code: 48 8b 85 e8 fe ff ff 48 8b 95 f0 fe ff ff e9 94 fb ff ff 48 89 95 f0 fe ff ff e8 81 53 6e 00 48 8b 95 f0 fe ff ff e9 62 fb ff ff <0f> 0b 48 89 cf 48 89 8d e8 fe ff ff e8 64 53 6e 00 48 8b 8d e8 RIP: tasklet_action_common.isra.19+0x6db/0x700 kernel/softirq.c:515 RSP: ffff8801d9b3faf8 Fixes: dc841e3 ("dccp: Extend CCID packet dequeueing interface") Signed-off-by: Eric Dumazet <edumazet@google.com> Reported-by: syzbot <syzkaller@googlegroups.com> Cc: Gerrit Renker <gerrit@erg.abdn.ac.uk> Cc: dccp@vger.kernel.org Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

[ Upstream commit 2c5d5b1 ] syzbot loves to set very small mtu on devices, since it brings joy. We must make llc_ui_sendmsg() fool proof. usercopy: Kernel memory overwrite attempt detected to wrapped address (offset 0, size 18446612139802320068)! kernel BUG at mm/usercopy.c:100! invalid opcode: 0000 [#1] SMP KASAN Dumping ftrace buffer: (ftrace buffer empty) Modules linked in: CPU: 0 PID: 17464 Comm: syz-executor1 Not tainted 4.17.0-rc3+ SolidRun#36 Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/01/2011 RIP: 0010:usercopy_abort+0xbb/0xbd mm/usercopy.c:88 RSP: 0018:ffff8801868bf800 EFLAGS: 00010282 RAX: 000000000000006c RBX: ffffffff87d2fb00 RCX: 0000000000000000 RDX: 000000000000006c RSI: ffffffff81610731 RDI: ffffed0030d17ef6 RBP: ffff8801868bf858 R08: ffff88018daa4200 R09: ffffed003b5c4fb0 R10: ffffed003b5c4fb0 R11: ffff8801dae27d87 R12: ffffffff87d2f8e0 R13: ffffffff87d2f7a0 R14: ffffffff87d2f7a0 R15: ffffffff87d2f7a0 FS: 00007f56a14ac700(0000) GS:ffff8801dae00000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 0000001b2bc21000 CR3: 00000001abeb1000 CR4: 00000000001426f0 DR0: 0000000020000000 DR1: 0000000000000000 DR2: 0000000000000000 DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000030602 Call Trace: check_bogus_address mm/usercopy.c:153 [inline] __check_object_size+0x5d9/0x5d9 mm/usercopy.c:256 check_object_size include/linux/thread_info.h:108 [inline] check_copy_size include/linux/thread_info.h:139 [inline] copy_from_iter_full include/linux/uio.h:121 [inline] memcpy_from_msg include/linux/skbuff.h:3305 [inline] llc_ui_sendmsg+0x4b1/0x1530 net/llc/af_llc.c:941 sock_sendmsg_nosec net/socket.c:629 [inline] sock_sendmsg+0xd5/0x120 net/socket.c:639 __sys_sendto+0x3d7/0x670 net/socket.c:1789 __do_sys_sendto net/socket.c:1801 [inline] __se_sys_sendto net/socket.c:1797 [inline] __x64_sys_sendto+0xe1/0x1a0 net/socket.c:1797 do_syscall_64+0x1b1/0x800 arch/x86/entry/common.c:287 entry_SYSCALL_64_after_hwframe+0x49/0xbe RIP: 0033:0x455979 RSP: 002b:00007f56a14abc68 EFLAGS: 00000246 ORIG_RAX: 000000000000002c RAX: ffffffffffffffda RBX: 00007f56a14ac6d4 RCX: 0000000000455979 RDX: 0000000000000000 RSI: 0000000020000000 RDI: 0000000000000018 RBP: 000000000072bea0 R08: 00000000200012c0 R09: 0000000000000010 R10: 0000000000000000 R11: 0000000000000246 R12: 00000000ffffffff R13: 0000000000000548 R14: 00000000006fbf60 R15: 0000000000000000 Code: 55 c0 e8 c0 55 bb ff ff 75 c8 48 8b 55 c0 4d 89 f9 ff 75 d0 4d 89 e8 48 89 d9 4c 89 e6 41 56 48 c7 c7 80 fa d2 87 e8 a0 0b a3 ff <0f> 0b e8 95 55 bb ff e8 c0 a8 f7 ff 8b 95 14 ff ff ff 4d 89 e8 RIP: usercopy_abort+0xbb/0xbd mm/usercopy.c:88 RSP: ffff8801868bf800 Fixes: 1da177e ("Linux-2.6.12-rc2") Signed-off-by: Eric Dumazet <edumazet@google.com> Reported-by: syzbot <syzkaller@googlegroups.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

…s found [ Upstream commit 72f17ba ] If an OVS_ATTR_NESTED attribute type is found while walking through netlink attributes, we call nlattr_set() recursively passing the length table for the following nested attributes, if different from the current one. However, once we're done with those sub-nested attributes, we should continue walking through attributes using the current table, instead of using the one related to the sub-nested attributes. For example, given this sequence: 1 OVS_KEY_ATTR_PRIORITY 2 OVS_KEY_ATTR_TUNNEL 3 OVS_TUNNEL_KEY_ATTR_ID 4 OVS_TUNNEL_KEY_ATTR_IPV4_SRC 5 OVS_TUNNEL_KEY_ATTR_IPV4_DST 6 OVS_TUNNEL_KEY_ATTR_TTL 7 OVS_TUNNEL_KEY_ATTR_TP_SRC 8 OVS_TUNNEL_KEY_ATTR_TP_DST 9 OVS_KEY_ATTR_IN_PORT 10 OVS_KEY_ATTR_SKB_MARK 11 OVS_KEY_ATTR_MPLS we switch to the 'ovs_tunnel_key_lens' table on attribute SolidRun#3, and we don't switch back to 'ovs_key_lens' while setting attributes SolidRun#9 to SolidRun#11 in the sequence. As OVS_KEY_ATTR_MPLS evaluates to 21, and the array size of 'ovs_tunnel_key_lens' is 15, we also get this kind of KASan splat while accessing the wrong table: [ 7654.586496] ================================================================== [ 7654.594573] BUG: KASAN: global-out-of-bounds in nlattr_set+0x164/0xde9 [openvswitch] [ 7654.603214] Read of size 4 at addr ffffffffc169ecf0 by task handler29/87430 [ 7654.610983] [ 7654.612644] CPU: 21 PID: 87430 Comm: handler29 Kdump: loaded Not tainted 3.10.0-866.el7.test.x86_64 #1 [ 7654.623030] Hardware name: Dell Inc. PowerEdge R730/072T6D, BIOS 2.1.7 06/16/2016 [ 7654.631379] Call Trace: [ 7654.634108] [<ffffffffb65a7c50>] dump_stack+0x19/0x1b [ 7654.639843] [<ffffffffb53ff373>] print_address_description+0x33/0x290 [ 7654.647129] [<ffffffffc169b37b>] ? nlattr_set+0x164/0xde9 [openvswitch] [ 7654.654607] [<ffffffffb53ff812>] kasan_report.part.3+0x242/0x330 [ 7654.661406] [<ffffffffb53ff9b4>] __asan_report_load4_noabort+0x34/0x40 [ 7654.668789] [<ffffffffc169b37b>] nlattr_set+0x164/0xde9 [openvswitch] [ 7654.676076] [<ffffffffc167ef68>] ovs_nla_get_match+0x10c8/0x1900 [openvswitch] [ 7654.684234] [<ffffffffb61e9cc8>] ? genl_rcv+0x28/0x40 [ 7654.689968] [<ffffffffb61e7733>] ? netlink_unicast+0x3f3/0x590 [ 7654.696574] [<ffffffffc167dea0>] ? ovs_nla_put_tunnel_info+0xb0/0xb0 [openvswitch] [ 7654.705122] [<ffffffffb4f41b50>] ? unwind_get_return_address+0xb0/0xb0 [ 7654.712503] [<ffffffffb65d9355>] ? system_call_fastpath+0x1c/0x21 [ 7654.719401] [<ffffffffb4f41d79>] ? update_stack_state+0x229/0x370 [ 7654.726298] [<ffffffffb4f41d79>] ? update_stack_state+0x229/0x370 [ 7654.733195] [<ffffffffb53fe4b5>] ? kasan_unpoison_shadow+0x35/0x50 [ 7654.740187] [<ffffffffb53fe62a>] ? kasan_kmalloc+0xaa/0xe0 [ 7654.746406] [<ffffffffb53fec32>] ? kasan_slab_alloc+0x12/0x20 [ 7654.752914] [<ffffffffb53fe711>] ? memset+0x31/0x40 [ 7654.758456] [<ffffffffc165bf92>] ovs_flow_cmd_new+0x2b2/0xf00 [openvswitch] [snip] [ 7655.132484] The buggy address belongs to the variable: [ 7655.138226] ovs_tunnel_key_lens+0xf0/0xffffffffffffd400 [openvswitch] [ 7655.145507] [ 7655.147166] Memory state around the buggy address: [ 7655.152514] ffffffffc169eb80: 00 00 00 00 00 00 00 00 00 00 fa fa fa fa fa fa [ 7655.160585] ffffffffc169ec00: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 [ 7655.168644] >ffffffffc169ec80: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 fa fa [ 7655.176701] ^ [ 7655.184372] ffffffffc169ed00: fa fa fa fa 00 00 00 00 fa fa fa fa 00 00 00 05 [ 7655.192431] ffffffffc169ed80: fa fa fa fa 00 00 00 00 00 00 00 00 00 00 00 00 [ 7655.200490] ================================================================== Reported-by: Hangbin Liu <liuhangbin@gmail.com> Fixes: 982b527 ("openvswitch: Fix mask generation for nested attributes.") Signed-off-by: Stefano Brivio <sbrivio@redhat.com> Reviewed-by: Sabrina Dubroca <sd@queasysnail.net> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

commit 69af7e2 upstream. Since get_kprobe_ctlblk() uses smp_processor_id() to access per-cpu variable, it hits smp_processor_id sanity check as below. [ 7.006928] BUG: using smp_processor_id() in preemptible [00000000] code: swapper/0/1 [ 7.007859] caller is debug_smp_processor_id+0x20/0x24 [ 7.008438] CPU: 0 PID: 1 Comm: swapper/0 Not tainted 4.16.0-rc1-00192-g4eb17253e4b5 #1 [ 7.008890] Hardware name: Generic DT based system [ 7.009917] [<c0313f0c>] (unwind_backtrace) from [<c030e6d8>] (show_stack+0x20/0x24) [ 7.010473] [<c030e6d8>] (show_stack) from [<c0c64694>] (dump_stack+0x84/0x98) [ 7.010990] [<c0c64694>] (dump_stack) from [<c071ca5c>] (check_preemption_disabled+0x138/0x13c) [ 7.011592] [<c071ca5c>] (check_preemption_disabled) from [<c071ca80>] (debug_smp_processor_id+0x20/0x24) [ 7.012214] [<c071ca80>] (debug_smp_processor_id) from [<c03335e0>] (optimized_callback+0x2c/0xe4) [ 7.013077] [<c03335e0>] (optimized_callback) from [<bf0021b0>] (0xbf0021b0) To fix this issue, call get_kprobe_ctlblk() right after irq-disabled since that disables preemption. Fixes: 0dc016d ("ARM: kprobes: enable OPTPROBES for ARM 32") Signed-off-by: Masami Hiramatsu <mhiramat@kernel.org> Cc: stable@vger.kernel.org Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

MXC-CEC: Return writable for poll when no link status.

5fc0429

If there is no link we need to allow writes otherwise libcec will block on select() in the SocketWrite() call. The write() will still fail with EAGAIN. Signed-off-by: Doug Nazar <nazard@nazar.ca>

warped-rudi merged commit af1b0f1 into OpenBricks:cec-rework Jul 29, 2017

Provide feedback

Saved searches

Use saved searches to filter your results more quickly

MXC-CEC: Return writable for poll when no link status. #1

MXC-CEC: Return writable for poll when no link status. #1

dougnazar commented Jul 24, 2017

warped-rudi commented Jul 29, 2017

MXC-CEC: Return writable for poll when no link status. #1

MXC-CEC: Return writable for poll when no link status. #1

Conversation

dougnazar commented Jul 24, 2017

warped-rudi commented Jul 29, 2017