diff --git a/docs/tft_display.md b/docs/tft_display.md
new file mode 100644
index 0000000..032c934
--- /dev/null
+++ b/docs/tft_display.md
@@ -0,0 +1,38 @@
+# TFT Display
+
+A small TFT display provides excellent feedback for the user. It can be used to display the current status of the device, or to display the current settings.
+
+## Pod Display
+
+The latest version of the Pod uses the [Adafruit 1.3" TFT display](https://www.adafruit.com/product/4313). This display is a 240x240 pixel display with a 16-bit color depth. It is a wide-angle display, which means that it can be viewed from a wide range of angles without the image becoming distorted.
+
+Detailed connection instructions are available on the [Adafruit Website](https://learn.adafruit.com/adafruit-1-14-240x135-color-tft-breakout/python-wiring-and-setup), basic pin connections are shown below.
+
+| TFT Display | Pod     |
+|-------------|---------|
+| Vin         | 3.3V    |
+| GND         | GND     |
+| SCK         | SLCK    |
+| MOSI(SI)    | MOSI    |
+| CS          | CE0     |
+| RST         | GPIO 24 |
+| D/C         | GPIO 25 |
+
+## Programming the Display
+
+**Note: All requirements are fulfilled when running the OpenPod installer.**
+
+Drivers for the display are found in the [Adafruit CircuitPython RGB Display Repository](https://github.com/adafruit/Adafruit_CircuitPython_RGB_Display) and can be installed using the following command:
+
+```bash
+sudo pip3 install adafruit-circuitpython-rgb-display
+```
+
+To use the display with Python, you will need to install the following packages and libraries:
+
+```bash
+sudo apt-get install libjpeg-dev
+sudo apt-get install zlib1g-dev
+sudo apt-get install libfreetype6-dev
+sudo pip3 install Pillow
+```
diff --git a/installer.sh b/installer.sh
index 0c5ba2c..7182815 100644
--- a/installer.sh
+++ b/installer.sh
@@ -138,6 +138,34 @@ else
     echo "jq already installed, skipping..."
 fi
 
+# ---------------------------- Pillow Requirements --------------------------- #
+REQUIRED_PKG="libjpeg-dev"
+PKG_OK=$(dpkg-query -W --showformat='${Status}\n' $REQUIRED_PKG|grep "install ok installed")
+if [ "" = "$PKG_OK" ]; then
+    echo "No $REQUIRED_PKG. Setting up $REQUIRED_PKG..."
+    sudo apt-get install libjpeg-dev -y
+else
+    echo "libjpeg-dev already installed, skipping..."
+fi
+
+REQUIRED_PKG="zlib1g-dev"
+PKG_OK=$(dpkg-query -W --showformat='${Status}\n' $REQUIRED_PKG|grep "install ok installed")
+if [ "" = "$PKG_OK" ]; then
+    echo "No $REQUIRED_PKG. Setting up $REQUIRED_PKG..."
+    sudo apt-get install zlib1g-dev -y
+else
+    echo "zlib1g-dev already installed, skipping..."
+fi
+
+REQUIRED_PKG="libfreetype6-dev"
+PKG_OK=$(dpkg-query -W --showformat='${Status}\n' $REQUIRED_PKG|grep "install ok installed")
+if [ "" = "$PKG_OK" ]; then
+    echo "No $REQUIRED_PKG. Setting up $REQUIRED_PKG..."
+    sudo apt-get install libfreetype6-dev -y
+else
+    echo "libfreetype6-dev already installed, skipping..."
+fi
+
 # -------------------------------- Python 3.11 ------------------------------- #
 pytohn_version=$(python -c 'import sys; print(".".join(map(str, sys.version_info[0:2])))')
 if [ "$pytohn_version" != "3.11" ]; then
diff --git a/openpod/modules/op_display.py b/openpod/modules/op_display.py
new file mode 100644
index 0000000..6bb83b5
--- /dev/null
+++ b/openpod/modules/op_display.py
@@ -0,0 +1,71 @@
+'''
+OpenPod | op_display.py
+Manages a TFT display, currently setup for the Adafruit 1.3" 240x240 TFT display.
+https://learn.adafruit.com/adafruit-1-3-and-1-54-240-x-240-wide-angle-tft-lcd-displays
+'''
+
+import time
+import busio
+import digitalio
+from board import SCK, MOSI, MISO, CE0, D24, D25
+
+from adafruit_rgb_display import color565
+from adafruit_rgb_display.st7789 import ST7789
+from PIL import Image, ImageDraw, ImageFont
+
+# Configuration for CS and DC pins:
+CS_PIN = CE0
+DC_PIN = D25
+RESET_PIN = D24
+BAUDRATE = 24000000
+
+# Setup SPI bus using hardware SPI:
+spi = busio.SPI(clock=SCK, MOSI=MOSI, MISO=MISO)
+
+# Create the ST7789 display:
+display = ST7789(
+    spi,
+    # rotation=90,
+    # width=240,
+    # height=240,
+    # x_offset=53,
+    # y_offset=40,
+    baudrate=BAUDRATE,
+    cs=digitalio.DigitalInOut(CS_PIN),
+    dc=digitalio.DigitalInOut(DC_PIN),
+    rst=digitalio.DigitalInOut(RESET_PIN))
+
+# Main loop: same as above
+while True:
+    display.fill(0)  # Clear the display
+    display.pixel(120, 160, color565(255, 0, 0))  # Draw a red pixel in the center.
+    time.sleep(2)  # Pause 2 seconds.
+    display.fill(color565(0, 0, 255))  # Clear the screen blue.
+    time.sleep(2)  # Pause 2 seconds.
+
+    width = display.width
+    height = display.height
+    image = Image.new("RGB", (width, height))
+    draw = ImageDraw.Draw(image)
+    draw.rectangle((0, 0, width, height), outline=0, fill=(0, 0, 0))
+
+    draw.rectangle((0, 0, width, height), fill=(0, 255, 0))
+
+    display.image(image)
+
+    BORDER = 20
+    draw.rectangle((BORDER, BORDER, width - BORDER - 1, height - BORDER - 1), fill=(170, 0, 136))
+
+    font = ImageFont.truetype("/usr/share/fonts/truetype/dejavu/DejaVuSans.ttf", 24)
+
+    TEXT = "Hello World!"
+    (font_width, font_height) = font.getsize(TEXT)
+    draw.text(
+        (width // 2 - font_width // 2, height // 2 - font_height // 2),
+        TEXT,
+        font=font,
+        fill=(255, 255, 0),
+    )
+
+    display.image(image)
+    time.sleep(10)
diff --git a/requirements.txt b/requirements.txt
index 6b0a80d..815950c 100644
--- a/requirements.txt
+++ b/requirements.txt
@@ -1,5 +1,7 @@
+adafruit-circuitpython-rgb-display==3.10.19
 config==0.5.1
 paho-mqtt==1.6.1
+Pillow==9.4.0
 pubsub==0.1.2
 PyJWT==2.6.0
 Pypubsub==4.0.3