diff --git a/resources/profiles/Creality/machine/Creality Ender-3 V2 Neo 0.4 nozzle.json b/resources/profiles/Creality/machine/Creality Ender-3 V2 Neo 0.4 nozzle.json
index 30cd381c1bd..f62fdb551ab 100644
--- a/resources/profiles/Creality/machine/Creality Ender-3 V2 Neo 0.4 nozzle.json	
+++ b/resources/profiles/Creality/machine/Creality Ender-3 V2 Neo 0.4 nozzle.json	
@@ -79,7 +79,7 @@
       "0.4",
       "0.4"
   ],
-	"machine_start_gcode": "M220 S100 ;Reset Feedrate\nM221 S100 ;Reset Flowrate\nM140 S[bed_temperature_initial_layer_single] ;Set final bed temp\nM104 S[nozzle_temperature_initial_layer] ;Set final nozzle temp\n\nG28 ;Home\n\nG92 E0 ;Reset Extruder\nG1 Z2.0 F3000 ;Move Z Axis up\nG1 X10.1 Y20 Z0.28 F5000.0 ;Move to start position\nM190 S[bed_temperature_initial_layer_single] ;Wait for bed temp to stabilize\nM109 S[nozzle_temperature_initial_layer] ;Wait for nozzle temp to stabilize\nG1 X10.1 Y145.0 Z0.28 F1500.0 E15 ;Draw the first line\nG1 X10.4 Y145.0 Z0.28 F5000.0 ;Move to side a little\nG1 X10.4 Y20 Z0.28 F1500.0 E30 ;Draw the second line\nG92 E0  ;Reset Extruder\nG1 E-1.0000 F1800 ;Retract a bit\nG1 Z2.0 F3000 ;Move Z Axis up\nG1 E0.0000 F1800",
+	"machine_start_gcode": "M220 S100 ;Reset Feedrate\nM221 S100 ;Reset Flowrate\nM140 S[bed_temperature_initial_layer_single] ;Set final bed temp\nM104 S[nozzle_temperature_initial_layer] ;Set final nozzle temp\n\nG28 ;Home\nG29 ;Auto bed leveling (create mesh if not already stored)\nM420 S1 ;Enable mesh leveling\n\nG92 E0 ;Reset Extruder\nG1 Z2.0 F3000 ;Move Z Axis up\nG1 X10.1 Y20 Z0.28 F5000.0 ;Move to start position\nM190 S[bed_temperature_initial_layer_single] ;Wait for bed temp to stabilize\nM109 S[nozzle_temperature_initial_layer] ;Wait for nozzle temp to stabilize\nG1 X10.1 Y145.0 Z0.28 F1500.0 E15 ;Draw the first line\nG1 X10.4 Y145.0 Z0.28 F5000.0 ;Move to side a little\nG1 X10.4 Y20 Z0.28 F1500.0 E30 ;Draw the second line\nG92 E0  ;Reset Extruder\nG1 E-1.0000 F1800 ;Retract a bit\nG1 Z2.0 F3000 ;Move Z Axis up\nG1 E0.0000 F1800",
 	"machine_end_gcode": "G91 ;Relative positionning\nG1 E-2 F2700 ;Retract a bit\nG1 E-2 Z0.2 F2400 ;Retract and raise Z\nG1 X5 Y5 F3000 ;Wipe out\nG1 Z10 ;Raise Z more\nG90 ;Absolute positionning\n\nG1 X0 Y0 ;Present print\nM106 S0 ;Turn-off fan\nM104 S0 ;Turn-off hotend\nM140 S0 ;Turn-off bed\n\nM84 X Y E ;Disable all steppers but Z",
   "thumbnails_format": "JPG",
   "thumbnails": [