Gstreamer RTSP Docs Update (#712)

Hoping this help others avoid hours of frustration.

As noted in the helpful but well hidden issue comment #193 (comment), the Gstreamer examples for RTSP do not run at all.  I'm no Gstreamer expert but using `h264parse` works perfectly, while `video/x-h264, format=avc,alignment=au` just causes the pipeline to hang.

docs/linux.md

@@ -47,13 +47,12 @@ Device found:
 
 ###### Running the `gst-launch-1.0` command to start streaming from a RTSP camera source.
 ```
-$ gst-launch-1.0 -v rtspsrc location=rtsp://YourCameraRtspUrl short-header=TRUE ! rtph264depay ! video/x-h264, format=avc,alignment=au ! h264parse ! kvssink stream-name=YourStreamName storage-size=128
+$ gst-launch-1.0 -v rtspsrc location=rtsp://YourCameraRtspUrl short-header=TRUE ! rtph264depay ! h264parse ! kvssink stream-name=YourStreamName storage-size=128
 ```
 
 **Note:** If you are using **IoT credentials** then you can pass them as parameters to the gst-launch-1.0 command
 ```
-$ gst-launch-1.0 -v rtspsrc location="rtsp://YourCameraRtspUrl" short-header=TRUE ! rtph264depay ! video/x-h264, format=avc,alignment=au !
- h264parse ! kvssink stream-name="iot-stream" iot-certificate="iot-certificate,endpoint=endpoint,cert-path=/path/to/certificate,key-path=/path/to/private/key,ca-path=/path/to/ca-cert,role-aliases=role-aliases"
+$ gst-launch-1.0 -v rtspsrc location="rtsp://YourCameraRtspUrl" short-header=TRUE ! rtph264depay ! h264parse ! kvssink stream-name="iot-stream" iot-certificate="iot-certificate,endpoint=endpoint,cert-path=/path/to/certificate,key-path=/path/to/private/key,ca-path=/path/to/ca-cert,role-aliases=role-aliases"
 ```
 You can find the RTSP URL from your IP camera manual or manufacturers product page.
 

docs/macos.md

@@ -25,14 +25,13 @@ Device found:
 ###### Running the `gst-launch-1.0` command to start streaming from RTSP camera source.
 
 ```
-$ gst-launch-1.0 rtspsrc location=rtsp://YourCameraRtspUrl short-header=TRUE ! rtph264depay ! video/x-h264, format=avc,alignment=au ! h264parse ! kvssink stream-name=YourStreamName storage-size=128 access-key="YourAccessKey" secret-key="YourSecretKey"
+$ gst-launch-1.0 rtspsrc location=rtsp://YourCameraRtspUrl short-header=TRUE ! rtph264depay ! h264parse ! kvssink stream-name=YourStreamName storage-size=128 access-key="YourAccessKey" secret-key="YourSecretKey"
 ```
 
 **Note:** If you are using **IoT credentials** then you can pass them as parameters to the gst-launch-1.0 command
 
 ```
-$ gst-launch-1.0 rtspsrc location=rtsp://YourCameraRtspUrl short-header=TRUE ! rtph264depay ! video/x-h264, format=avc,alignment=au !
- h264parse ! kvssink stream-name="iot-stream" iot-certificate="iot-certificate,endpoint=endpoint,cert-path=/path/to/certificate,key-path=/path/to/private/key,ca-path=/path/to/ca-cert,role-aliases=role-aliases"
+$ gst-launch-1.0 rtspsrc location=rtsp://YourCameraRtspUrl short-header=TRUE ! rtph264depay ! h264parse ! kvssink stream-name="iot-stream" iot-certificate="iot-certificate,endpoint=endpoint,cert-path=/path/to/certificate,key-path=/path/to/private/key,ca-path=/path/to/ca-cert,role-aliases=role-aliases"
 ```
 You can find the RTSP URL from your IP camera manual or manufacturers product page.
 

docs/raspberry-pi.md

@@ -69,13 +69,12 @@ Device found:
 
 ###### Running the `gst-launch-1.0` command to start streaming from a RTSP camera source.
 ```
-$ gst-launch-1.0 -v rtspsrc location=rtsp://YourCameraRtspUrl short-header=TRUE ! rtph264depay ! video/x-h264, format=avc,alignment=au ! h264parse ! kvssink stream-name=YourStreamName storage-size=128
+$ gst-launch-1.0 -v rtspsrc location=rtsp://YourCameraRtspUrl short-header=TRUE ! rtph264depay ! h264parse ! kvssink stream-name=YourStreamName storage-size=128
 ```
 
 **Note:** If you are using **IoT credentials** then you can pass them as parameters to the gst-launch-1.0 command
 ```
-$ gst-launch-1.0 -v rtspsrc location="rtsp://YourCameraRtspUrl" short-header=TRUE ! rtph264depay ! video/x-h264, format=avc,alignment=au !
- h264parse ! kvssink stream-name="iot-stream" iot-certificate="iot-certificate,endpoint=endpoint,cert-path=/path/to/certificate,key-path=/path/to/private/key,ca-path=/path/to/ca-cert,role-aliases=role-aliases"
+$ gst-launch-1.0 -v rtspsrc location="rtsp://YourCameraRtspUrl" short-header=TRUE ! rtph264depay ! h264parse ! kvssink stream-name="iot-stream" iot-certificate="iot-certificate,endpoint=endpoint,cert-path=/path/to/certificate,key-path=/path/to/private/key,ca-path=/path/to/ca-cert,role-aliases=role-aliases"
 ```
 You can find the RTSP URL from your IP camera manual or manufacturers product page.
 
@@ -163,7 +162,7 @@ gst-launch-1.0 -v filesrc location="YourAudioVideo.mkv" ! matroskademux name=dem
 ###### Running the `gst-launch-1.0` command to upload MP4 file that contains both *audio and video*:
 
 ```
-gst-launch-1.0 -v  filesrc location="YourAudioVideo.mp4" ! qtdemux name=demux ! queue ! h264parse !  video/x-h264,stream-format=avc,alignment=au ! kvssink name=sink stream-name="audio-video-file" access-key="YourAccessKeyId" secret-key="YourSecretAccessKey" streaming-type=offline demux. ! queue ! aacparse ! sink.
+gst-launch-1.0 -v  filesrc location="YourAudioVideo.mp4" ! qtdemux name=demux ! queue ! h264parse ! video/x-h264,stream-format=avc,alignment=au ! kvssink name=sink stream-name="audio-video-file" access-key="YourAccessKeyId" secret-key="YourSecretAccessKey" streaming-type=offline demux. ! queue ! aacparse ! sink.
 ```
 
 ###### Running the `gst-launch-1.0` command to upload MPEG2TS file that contains both *audio and video*:

docs/windows.md

@@ -72,7 +72,7 @@ gst-launch-1.0 ksvideosrc do-timestamp=TRUE ! video/x-raw,width=640,height=480,f
 **Note:** If you are using IoT credentials then you can pass them as parameters to the gst-launch-1.0 command
 
 ```
-gst-launch-1.0 rtspsrc location="rtsp://YourCameraRtspUrl" short-header=TRUE ! rtph264depay ! video/x-h264, format=avc,alignment=au ! h264parse ! kvssink stream-name="iot-stream" iot-certificate="iot-certificate,endpoint=endpoint,cert-path=/path/to/certificate,key-path=/path/to/private/key,ca-path=/path/to/ca-cert,role-aliases=role-aliases"
+gst-launch-1.0 rtspsrc location="rtsp://YourCameraRtspUrl" short-header=TRUE ! rtph264depay ! h264parse ! kvssink stream-name="iot-stream" iot-certificate="iot-certificate,endpoint=endpoint,cert-path=/path/to/certificate,key-path=/path/to/private/key,ca-path=/path/to/ca-cert,role-aliases=role-aliases"
 ```
 
 2.2 Use `gst-launch-1.0` to send audio and raw video to Kinesis Video Streams
@@ -98,7 +98,7 @@ gst-launch-1.0 -v filesrc location="YourAudioVideo.mkv" ! matroskademux name=dem
 ###### Running the `gst-launch-1.0` command to upload MP4 file that contains both *audio and video*.
 
 ```
-gst-launch-1.0 -v  filesrc location="YourAudioVideo.mp4" ! qtdemux name=demux ! queue ! h264parse !  video/x-h264,stream-format=avc,alignment=au ! kvssink name=sink stream-name="audio-video-file" access-key="YourAccessKeyId" secret-key="YourSecretAccessKey" streaming-type=offline demux. ! queue ! aacparse ! sink.
+gst-launch-1.0 -v  filesrc location="YourAudioVideo.mp4" ! qtdemux name=demux ! queue ! h264parse ! video/x-h264,stream-format=avc,alignment=au ! kvssink name=sink stream-name="audio-video-file" access-key="YourAccessKeyId" secret-key="YourSecretAccessKey" streaming-type=offline demux. ! queue ! aacparse ! sink.
 ```
 
 ###### Running the `gst-launch-1.0` command to upload MPEG2TS file that contains both *audio and video*.