Skip to content

Latest commit

 

History

History
269 lines (191 loc) · 7.05 KB

Tutorial.md

File metadata and controls

269 lines (191 loc) · 7.05 KB
Raw

Tutorial

In this tutorial, we'll set up Mycelial to synchronize data from one SQLite instance to another using Mycelite.

Setup

Installation

Install the Mycelial CLI for your system.

Mac 
brew install mycelial/tap/mycelial
Linux
Debian Based Linux x86_64 
curl -L https://github.com/mycelial/cli/releases/download/v0.5.1/mycelial_0.5.1_amd64.deb --output mycelial_amd64.deb
dpkg -i ./mycelial_amd64.deb
Debian Based Linux ARM64 
curl -L https://github.com/mycelial/cli/releases/download/v0.5.1/mycelial_0.5.1_arm64.deb --output mycelial_arm64.deb
dpkg -i ./mycelial_arm64.deb
Debian Based Linux ARM 
curl -L https://github.com/mycelial/cli/releases/download/v0.5.1/mycelial_0.5.1_armhf.deb --output mycelial_armhf.deb
dpkg -i ./mycelial_armhf.deb
Redhat Based Linux x86_64 
yum install https://github.com/mycelial/cli/releases/download/v0.5.1/mycelial-v0.5.1-1.x86_64.rpm
Redhat Based Linux ARM64 
yum install https://github.com/mycelial/cli/releases/download/v0.5.1/mycelial-v0.5.1-1.arm64.rpm
Redhat Based Linux ARM 
yum install https://github.com/mycelial/cli/releases/download/v0.5.1/mycelial-v0.5.1-1.armhf.rpm

Initializing Mycelial

Open a shell, then create a directory named demo and navigate into the demo directory.

mkdir demo
cd demo

Issue the following command:

mycelial init --local

The init --local command will download the appropriate Mycelial server and client (myceliald) for your system, and it will guide you through the client configuration process.

Each configuration question you receive in the CLI can be overridden, or you can accept the default value. However, the security token must be entered manually. Make a note of the security token you enter because you'll need it in the subsequent steps below. For demo purposes, you should accept the defaults when provided by pressing enter.

When you are prompted What would you like to do?, first choose Add source, then select the Full SQLite replication source and answer the prompts as desired, or press enter to accept the default answers. For demo purposes, you should accept the default answers.

After you've added a source, choose Add Destination, then select Full SQLite replication destination and answer the prompts. For demo purposes, you should accept the default answers.

After you've added a source and a destination, choose the Exit option.

Upon exiting the CLI, a config.toml client configuration file is created which will be used by the client in a moment.

Starting the Mycelial server and client

Enter the following command to start the server and client:

mycelial start

When prompted for the security token, enter the one you used earlier.

At this point, the Mycelial server and client are running in the background.

Download Mycelite

Download and unarchive Mycelite for your system:

Mac
Mac Arm64 
curl -L https://github.com/mycelial/mycelite/releases/latest/download/aarch64-apple-darwin.tgz --output aarch64-apple-darwin.tgz
tar -xvzf aarch64-apple-darwin.tgz
Mac x86_64 
curl -L https://github.com/mycelial/mycelite/releases/latest/download/x86_64-apple-darwin.tgz --output x86_64-apple-darwin.tgz
tar -xvzf x86_64-apple-darwin.tgz
Linux
Linux x86_gnu 
curl -L https://github.com/mycelial/mycelite/releases/latest/download/x86_64-unknown-linux-gnu.tgz --output x86_64-unknown-linux-gnu.tgz
tar -xvzf x86_64-unknown-linux-gnu.tgz
Linux x86_musl 
curl -L https://github.com/mycelial/mycelite/releases/latest/download/x86_64-unknown-linux-musl.tgz --output x86_64-unknown-linux-musl.tgz
tar -xvzf x86_64-unknown-linux-musl.tgz
Linux arm_32 
curl -L https://github.com/mycelial/mycelite/releases/latest/download/arm-unknown-linux-gnueabihf.tgz --output arm-unknown-linux-gnueabihf.tgz
tar -xvzf arm-unknown-linux-gnueabihf.tgz
Linux arm_64 
curl -L https://github.com/mycelial/mycelite/releases/latest/download/aarch64-unknown-linux-gnu.tgz --output arm-unknown-linux-gnueabihf.tgz
tar -xvzf arm-unknown-linux-gnueabihf.tgz

Use Mycelite

After you've downloaded and unarchived the extension, you'll need to load the extension and open your SQLite database. When the extension is loaded and the SQLite database is opened, it will create a Mycelite journal file, a sibling file to the SQLite database file. The journal file is used to synchronize SQLite databases, and it was configured earlier during the init step.

MacOS users: The default SQLite that ships with MacOS does not have extensions enabled. One alternative is to install SQLite with Homebrew. Be sure to adjust your PATH environmental variable to point to the SQLite version you installed with Homebrew.

sqlite3
.load ./libmycelite mycelite_writer
.open data.db

NOTE: You must load the extension every time you open the source SQLite database.

Next, create a table in your SQLite database and insert a record.

CREATE TABLE users (id INTEGER PRIMARY KEY, name TEXT);
INSERT INTO users(name) VALUES ('John');

Create a data pipeline

Open your web browser and navigate to http://localhost:7777. When prompted for a username and password, enter the security token you previously created into the username field, leaving the password field blank.

In the upper left portion of the page, you'll see the source and destination we configured for the client and the Mycelial Server.

Drag and drop the source node onto the canvas.

Next, drag and drop the Mycelial Server onto the canvas and set the token to the value you entered earlier.

Next, drag and drop the destination node onto the canvas.

Lastly, connect the source to the destination via the Mycelial Server.

Now, push the publish button to start the synchronization workflow.

Observe the synchronization

At this point, you can see a destination.sqlite SQLite database in the demo directory.

Open a new terminal shell and query the database as follows:

cd demo
sqlite3 destination.sqlite
sqlite> .tables # shows database tables
users
sqlite> SELECT * FROM USERS; # you should see the user named 'John'
id  name
--  ----
1   John

Stop the server and client

Enter the command mycelial destroy to stop the server and client.