Skip to content

Latest commit

 

History

History
75 lines (40 loc) · 2.56 KB

DockerUbuntu.md

File metadata and controls

75 lines (40 loc) · 2.56 KB
Raw

Docker Setup for Ubuntu

Dockerize container to execute edx-app-test on Android Phone from Ubuntu Host

Setup

1- Install followings,

2- Install edx Android app on Android Device and connect(specific device)to Ubuntu(through USB) Host

3- Check out/download project source code,

    git clone https://github.com/edx/edx-app-test

4- ubuntu-setup.sh script it used to take care of all necessary installation on host, browse project directory and open ubuntu-setup.sh through some editor

  • Enter connected Android Device OS Version against ANDROID_PLATFORM_VERSION

  • Enter docker image name in place of <machine name> i.e appium-image

  • Enter container name against --name i.e appium-container and docker image name in place of <machine name> as defined above, please note that one needs to enter new container name on re-running script

  • Save changes made in ubuntu-setup.sh

5- Permit chmod +x ./ubuntu-setup.sh and run ./ubuntu-setup.sh, in terminal, it will start installations and return new running container id

6- Run below command and connected android device should be visible under List of devices attached if everything was successful, one may need to re-plug the connected Android Device and run command again,

     docker exec -it $(docker ps -q) adb devices

7- Open another tab of terminal(Ubuntu host) and get the ip of specific running docker container

    docker inspect $(docker ps -q) | grep IPA

8- Pass the above machine ip as server url like below

    export SERVER_URL='http://172.17.0.2:4723/wd/hub'

its all set to start execution now

Run

From host machine browse project directory, and run followings based on your need,

  • Execute all test cases in specific directory

      pytest

  • Execute specific test case

      pytest -v <test case name>

  • Execute specific test case with html report at end

      pytest -v <test case name> --html=report.html

Execution Next time

After above successful setup one need to follow below steps only for executions next time,

1 - Connect Android Device to host machine

2 - Run Container, enter container container name against --name i.e appium-container and docker image name in place of <image name> as created earlier

docker container run -it --privileged --rm -d -p 4723:4723 -v /dev/bus/usb:/dev/bus/usb --name <container name> <image name>

3 - Repeat above step # 6, 7 & 8

4 - Execute test cases as mentioned in Run section