Skip to content

Latest commit

 

History

History
253 lines (202 loc) · 13.1 KB

README.md

File metadata and controls

253 lines (202 loc) · 13.1 KB

cargo-generate-rpm

Cargo helper command to generate a binary RPM package (.rpm) from Cargo project.

This command does not depend on rpmbuild and generates an RPM package file without a spec file by using the rpm crate.

Rust cargo-generate-rpm at crates.io

Legacy systems requiring RPMv3 (e.g. CentOS 7) are no longer supported due to rpm-rs compatibility. Use versions prior to 0.15 for such a system.

Install

cargo install cargo-generate-rpm

Usage

cargo build --release
strip -s target/release/XXX
cargo generate-rpm

Upon run cargo generate-rpm on your cargo project, a binary RPM package file will be created in target/generate-rpm/XXX.rpm. You can change the RPM package file location using -o option.

In advance, run cargo build --release and strip the debug symbols (strip -s target/release/XXX), because these are not run upon cargo generate-rpm as of now.

Configuration

This command generates RPM metadata from the Cargo.toml file:

[package.metadata.generate-rpm] options

  • name: the package name. If not present, package.name is used.
  • version: the package version. If not present, package.version is used.
  • license: the package license. If not present, package.license is used.
  • summary: the package summary/description. If not present, package.description is used.
  • url: the package homepage url. If not present, package.homepage is used. If neither present, package.repository is used.
  • assets: (mandatory) the array of the files to be included in the package
    • source: the location of that asset in the Rust project. (e.g. target/release/XXX) Wildcard character * is allowed.
    • dest: the install-destination. (e.g. /usr/bin/XXX) It shall be a file path or a directory path ending /. If source contains wildcard character *, it must be a directory, not a file path.
    • mode: the permissions as octal string. (e.g. 755 to indicate -rwxr-xr-x)
    • config: set true if it is a configuration file. Set the string "noreplace" instead to avoid overwriting an existing file that have been modified. (Not supported for "missingok" as of now)
    • doc: set true if it is a document file.
    • user: the owner of the file.
    • group: the group owner of the file.
    • caps: optional string of capabilities. (e.g. cap_sys_admin=pe)
  • release: optional string of release.
  • epoch: optional number of epoch.
  • pre_install_script: optional string or file path of pre_install_script.
    • pre_install_script_flags: optional integer value to set scriptlet flags.
    • pre_install_script_prog: optional string array to set scriptlet interpreter/arguments.
  • pre_uninstall_script: optional string or file path of pre_uninstall_script.
    • pre_uninstall_script_flags: optional integer value to set scriptlet flags.
    • pre_uninstall_script_prog: optional string array to set scriptlet interpreter/arguments.
  • pre_trans_script: optional string or file path of pre_trans_script.
    • pre_trans_script_flags: optional integer value to set scriptlet flags.
    • pre_trans_script_prog: optional string array to set scriptlet interpreter/arguments.
  • pre_untrans_script: optional string or file path of pre_untrans_script.
    • pre_untrans_script_flags: optional integer value to set scriptlet flags.
    • pre_untrans_script_prog: optional string array to set scriptlet interpreter/arguments.
  • post_install_script: optional string or file path of post_install_script.
    • post_install_script_flags: optional integer value to set scriptlet flags.
    • post_install_script_prog: optional string array to set scriptlet interpreter/arguments.
  • post_uninstall_script: optional string or file path of post_uninstall_script.
    • post_uninstall_script_flags: optional integer value to set scriptlet flags.
    • post_uninstall_script_prog: optional string array to set scriptlet interpreter/arguments.
  • post_trans_script: optional string or file path of post_trans_script.
    • post_trans_script_flags: optional integer value to set scriptlet flags.
    • post_trans_script_prog: optional string array to set scriptlet interpreter/arguments.
  • post_untrans_script: optional string or file path of post_untrans_script.
    • post_untrans_script_flags: optional integer value to set scriptlet flags.
    • post_untrans_script_prog: optional string array to set scriptlet interpreter/arguments.
  • requires: optional list of Requires
  • auto-req: optional string "no" to disable the automatic dependency process
  • require-sh: optional boolean false to omit /bin/sh from Requirements
  • obsoletes: optional list of Obsoletes
  • conflicts: optional list of Conflicts
  • provides: optional list of Provides
  • recommends: optional list of Recommends
  • supplements: optional list of Supplements
  • suggests: optional list of Suggests
  • enhances: optional list of Enhances
  • vendor: optional string of Vendor

Adding assets such as the binary file, .desktop file, or icons, shall be written in the following way.

[package.metadata.generate-rpm]
assets = [
    { source = "target/release/XXX", dest = "/usr/bin/XXX", mode = "755" },
    { source = "<path_relative_to_project_root>/XXX.desktop", dest = "/usr/share/applications/XXX.desktop", mode = "644" },
    { source = "<path_relative_to_project_root>/*/apps/XXX.png", dest = "/usr/share/icons/hicolor/", mode = "644" },
]

[package.metadata.generate-rpm.{requires,obsoletes,conflicts,provides,recommends,supplements,suggests,enhances}] options

Dependencies such as "requires", "obsoletes", "conflicts" and "provides" and weak dependencies such as "recommends", "supplements", "suggests", and "enhances" shall be written in similar way as dependencies in Cargo.toml.

[package.metadata.generate-rpm.requires]
alternative = "*"
filesystem = ">= 3"

This example states that the package requires with any versions of alternative and all versions of filesystem 3.0 or higher.

Following table lists the version comparisons:

Comparison Meaning
package = "*" A package at any version number
package = "< version" A package with a version number less than version
package = "<= version" A package with a version number less than or equal to version
package = "= version" A package with a version number equal to version
package = "> version" A package with a version number greater than version
package = ">= version" A package with a version number greater than or equal to version

It is necessary to place a space between version and symbols such as <, <=, etc... package = "version" is not accepted, instead use package = "= version".

This command automatically determines what shared libraries a package requires. There may be times when the automatic dependency processing is not desired. The packege author and users can configure the processing.

  • --auto-req auto or --auto-req not specified: Use the preferred automatic dependency process. The following rules are used:
    • If package.metadata.generate-rpm.auto-req set to "no" or "disabled", the process is disabled.
    • If /usr/lib/rpm/find-requires exists, it is used (same behaviour as --auto-req find-requires).
    • Otherwise, builtin procedure is used (same behaviour as --auto-req builtin).
  • --auto-req disabled, --auto-req no: Disable the discovery of dependencies.
  • --auto-req builtin: Use the builtin procedure based on ldd.
  • --auto-req find-requires: Use /usr/lib/rpm/find-requires. This behavior is the same as the original rpmbuild.
  • --auto-req /path/to/find-requires: Use the specified external program is used.

/bin/sh is always added to the package requirements. To disable it, set package.metadata.generate-rpm.require-sh to false. You should not do this if you use scripts such as pre_install_script or if your assets contain shell scripts.

Overwrite configuration

[package.metadata.generate-rpm] can be overwritten. The following command line options are used:

  • --metadata-overwrite=TOML_FILE.toml : Overwrite the [package.metadata.generate-rpm] options with the contents of the specified TOML file. Multiple files can be specified, separated by commas.
  • --metadata-overwrite=TOML_FILE.toml#TOML.PATH : Overwrites the [package.metadata.generate-rpm] options with the table specified in the TOML path of the TOML file. Only a sequence of bare keys connected by dots is acceptable for the TOML path. Path containing quoted keys (such as metadata."παραλλαγή") cannot be acceptable. Multiple files with TOML pathes can be specified, separated by commas.
  • -s 'toml "text"' or --set-metadata='toml "text"' : Overwrite the [package.metadata.generate-rpm] options with inline TOML text. The argument text --- inline TOML text must be enclosed in quotation marks since it contains spaces.
  • --variant=VARIANT : Overwrites the [package.metadata.generate-rpm] options with the table specified in [package.metadata.generate-rpm.variants.VARIANT] of the TOML file. It is a shortcut to --metadata-overwrite=path/to/Cargo.toml#package.metadata.generate-rpm.variants.VARIANT. It is intended for providing multiple variants of the metadata in a Cargo.toml and ability for the users to select the variant using --variant=name option. Multiple variant names can be specified, separated by commas.

These options may be specified multiple times, with the last one written being applied regardless of the kind of option. For example, the arguments -s 'release = "alpha"' --metadata-overwrite=beta.toml where beta.toml contains release = "beta", then gives release = "beta".

Advanced Usage

Workspace

To generate an RPM package from a member of a workspace, execute cargo generate-rpm in the workspace directory with specifying the package (directory path) with option -p:

cargo build --release
strip -s target/release/XXX
cargo generate-rpm -p XXX

[package.metadata.generate-rpm] options should be written in XXX/Cargo.toml.

When the option -p specified, first, the asset file source shall be treated as a relative path from the current directory. If not found, it shall be treated as a relative path from the directory of the package. If both not found, cargo generate-rpm shall fail with an error.

For example, source = target/bin/XXX would usually be treated as a relative path from the current directory. Because all packages in the workspace share a common output directory that is located target in workspace directory.

Cross compilation

This command supports --target-dir, --target, and --profile options like cargo build. Depending on these options, this command changes the RPM package file location and replaces target/release/ of the source locations of the assets.

cargo build --release --target x86_64-unknown-linux-gnu
cargo generate-rpm --target x86_64-unknown-linux-gnu

When --target-dir TARGET-DIR and --target x86_64-unknown-linux-gnu are specified, a binary RPM file will be created at TARGET-DIR/x86_64-unknown-linux-gnu/generate-rpm/XXX.rpm instead of target/generate-rpm/XXX.rpm. In this case, the source of the asset { source = "target/release/XXX", dest = "/usr/bin/XXX" } will be treated as TARGET-DIR/x86_64-unknown-linux-gnu/release/XXX instead of target/release/XXX.

You can use CARGO_BUILD_TARGET environment variable instead of --target option and CARGO_BUILD_TARGET_DIR or CARGO_TARGET_DIR instead of --target-dir.

Similarly, if using a custom build profile with, for example, --profile custom the source of the asset { source = "target/release/XXX" } will be treated as target/custom/XXX.

Payload compress type

The default payload compress type of the generated RPM file is zstd. You can specify the payload compress type with --payload-compress TYPE: none, gzip, or zstd.

Scriptlet Flags and Prog Settings

Scriptlet settings can be configured via *_script_flags and *_script_prog settings.

Scriptlet Flags

Flag Setting Value Description Example Usage
RPMSCRIPT_FLAG_EXPAND 1 Enables macro expansion pre_install_script_flags = 0b001
RPMSCRIPT_FLAG_QFORMAT 2 Enables header query format expansion pre_install_script_flags = 0b010
RPMSCRIPT_FLAG_CRITICAL 4 Enables critical severity for scriplet success or failure pre_install_script_flags = 0b100

Example

pre_install_script = """
echo preinstall
"""
pre_install_script_flags = 0b011 # Enables EXPAND and QFORMAT flags
pre_install_script_prog = ["/bin/blah/bash", "-c"] # Sets the interpreter/argument settings for the scriptlet