configuration-stratovirt.toml.in

# Copyright (c) 2023 Huawei Technologies Co.,Ltd.
#
# SPDX-License-Identifier: Apache-2.0
#

# XXX: WARNING: this file is auto-generated.
# XXX:
# XXX: Source file: "@CONFIG_STRATOVIRT_IN@"
# XXX: Project:
# XXX:   Name: @PROJECT_NAME@
# XXX:   Type: @PROJECT_TYPE@

[hypervisor.stratovirt]
path = "@STRATOVIRTPATH@"
kernel = "@KERNELPATH_STRATOVIRT@"
#image = "@IMAGEPATH@"
initrd = "@INITRDPATH@"
machine_type = "@DEFMACHINETYPE_STRATOVIRT@"

# rootfs filesystem type:
#   - ext4 (default)
#   - xfs
#   - erofs
rootfs_type = @DEFROOTFSTYPE@

# List of valid annotation names for the hypervisor
# Each member of the list is a regular expression, which is the base name
# of the annotation, e.g. "path" for io.katacontainers.config.hypervisor.path"
enable_annotations = @DEFENABLEANNOTATIONS@

# List of valid annotations values for the hypervisor
# Each member of the list is a path pattern as described by glob(3).
# The default if not set is empty (all annotations rejected.)
# Your distribution recommends: @STRATOVIRTVALIDHYPERVISORPATHS@
valid_hypervisor_paths = @STRATOVIRTVALIDHYPERVISORPATHS@

# Optional space-separated list of options to pass to the guest kernel.
# For example, use `kernel_params = "vsyscall=emulate"` if you are having
# trouble running pre-2.15 glibc.
#
# WARNING: - any parameter specified here will take priority over the default
# parameter value of the same name used to start the virtual machine.
# Do not set values here unless you understand the impact of doing so as you
# may stop the virtual machine from booting.
# To see the list of default parameters, enable hypervisor debug, create a
# container and look for 'default-kernel-parameters' log entries.
kernel_params = "@KERNELPARAMS@"

# Default number of vCPUs per SB/VM:
# unspecified or 0                --> will be set to @DEFVCPUS@
# < 0                             --> will be set to the actual number of physical cores
# > 0 <= number of physical cores --> will be set to the specified number
# > number of physical cores      --> will be set to the actual number of physical cores
default_vcpus = 1

# Default maximum number of vCPUs per SB/VM:
# unspecified or == 0             --> will be set to the actual number of physical cores or to the maximum number
#                                     of vCPUs supported by KVM if that number is exceeded
# > 0 <= number of physical cores --> will be set to the specified number
# > number of physical cores      --> will be set to the actual number of physical cores or to the maximum number
#                                     of vCPUs supported by KVM if that number is exceeded
# WARNING: Depending of the architecture, the maximum number of vCPUs supported by KVM is used when
# the actual number of physical cores is greater than it.
# WARNING: Be aware that this value impacts the virtual machine's memory footprint and CPU
# the hotplug functionality. For example, `default_maxvcpus = 240` specifies that until 240 vCPUs
# can be added to a SB/VM, but the memory footprint will be big. Another example, with
# `default_maxvcpus = 8` the memory footprint will be small, but 8 will be the maximum number of
# vCPUs supported by the SB/VM. In general, we recommend that you do not edit this variable,
# unless you know what are you doing.
# NOTICE: on arm platform with gicv2 interrupt controller, set it to 8.
default_maxvcpus = @DEFMAXVCPUS@

# Bridges can be used to hot plug devices.
# Limitations:
# * Currently only pci bridges are supported
# * Until 30 devices per bridge can be hot plugged.
# * Until 5 PCI bridges can be cold plugged per VM.
#   This limitation could be a bug in the kernel
# Default number of bridges per SB/VM:
# unspecified or 0   --> will be set to @DEFBRIDGES@
# > 1 <= 5           --> will be set to the specified number
# > 5                --> will be set to 5
default_bridges = @DEFBRIDGES@

# Default memory size in MiB for SB/VM.
# If unspecified then it will be set @DEFMEMSZ@ MiB.
default_memory = @DEFMEMSZ@
#
# Default memory slots per SB/VM.
# If unspecified then it will be set @DEFMEMSLOTS@.
# This is will determine the times that memory will be hotadded to sandbox/VM.
#memory_slots = @DEFMEMSLOTS@

# Default maximum memory in MiB per SB / VM
# unspecified or == 0           --> will be set to the actual amount of physical RAM
# > 0 <= amount of physical RAM --> will be set to the specified number
# > amount of physical RAM      --> will be set to the actual amount of physical RAM
default_maxmemory = @DEFMAXMEMSZ@

# The size in MiB will be plused to max memory of hypervisor.
# It is the memory address space for the NVDIMM devie.
# If set block storage driver (block_device_driver) to "nvdimm",
# should set memory_offset to the size of block device.
# Default 0
#memory_offset = 0

# Disable block device from being used for a container's rootfs.
# In case of a storage driver like devicemapper where a container's
# root file system is backed by a block device, the block device is passed
# directly to the hypervisor for performance reasons.
# This flag prevents the block device from being passed to the hypervisor,
# virtio-fs is used instead to pass the rootfs.
disable_block_device_use = @DEFDISABLEBLOCK@

# Shared file system type:
#   - virtio-fs (default)
#   - virtio-fs-nydus
#   - none
shared_fs = "@DEFSHAREDFS_STRATOVIRT_VIRTIOFS@"

# Path to vhost-user-fs daemon.
virtio_fs_daemon = "@DEFVIRTIOFSDAEMON@"

# List of valid annotations values for the virtiofs daemon
# The default if not set is empty (all annotations rejected.)
valid_virtio_fs_daemon_paths = @DEFVALIDVIRTIOFSDAEMONPATHS@

# Default size of DAX cache in MiB
virtio_fs_cache_size = @DEFVIRTIOFSCACHESIZE@

# Extra args for virtiofsd daemon
#
# Format example:
#   ["--arg1=xxx", "--arg2=yyy"]
# Examples:
#   Set virtiofsd log level to debug : ["--log-level=debug"]
#
# see `virtiofsd -h` for possible options.
virtio_fs_extra_args = @DEFVIRTIOFSEXTRAARGS@

# Cache mode:
#
#  - never
#    Metadata, data, and pathname lookup are not cached in guest. They are
#    always fetched from host and any changes are immediately pushed to host.
#
#  - auto
#    Metadata and pathname lookup cache expires after a configured amount of
#    time (default is 1 second). Data is cached while the file is open (close
#    to open consistency).
#
#  - always
#    Metadata, data, and pathname lookup are cached in guest and never expire.
virtio_fs_cache = "@DEFVIRTIOFSCACHE@"

# Block storage driver to be used for the hypervisor in case the container
# rootfs is backed by a block device. This is virtio-scsi, virtio-blk
# or nvdimm.
block_device_driver = "@DEFBLOCKSTORAGEDRIVER_STRATOVIRT@"

# Specifies cache-related options will be set to block devices or not.
# Default false
#block_device_cache_set = true

# Specifies cache-related options for block devices.
# Denotes whether use of O_DIRECT (bypass the host page cache) is enabled.
# Default false
#block_device_cache_direct = true

# Specifies cache-related options for block devices.
# Denotes whether flush requests for the device are ignored.
# Default false
#block_device_cache_noflush = true

# Enable huge pages for VM RAM, default false
# Enabling this will result in the VM memory
# being allocated using huge pages.
# This is useful when you want to use vhost-user network
# stacks within the container. This will automatically
# result in memory pre allocation
#enable_hugepages = true

# Enable vIOMMU, default false
# Enabling this will result in the VM having a vIOMMU device
# This will also add the following options to the kernel's
# command line: intel_iommu=on,iommu=pt
#enable_iommu = true

# This option changes the default hypervisor and kernel parameters
# to enable debug output where available.
#
# Default false
#enable_debug = true

# Disable the customizations done in the runtime when it detects
# that it is running on top a VMM. This will result in the runtime
# behaving as it would when running on bare metal.
#
#disable_nesting_checks = true

#
# Default entropy source.
# The path to a host source of entropy (including a real hardware RNG)
# /dev/urandom and /dev/random are two main options.
# Be aware that /dev/random is a blocking source of entropy.  If the host
# runs out of entropy, the VMs boot time will increase leading to get startup
# timeouts.
# The source of entropy /dev/urandom is non-blocking and provides a
# generally acceptable source of entropy. It should work well for pretty much
# all practical purposes.
entropy_source = "@DEFENTROPYSOURCE@"

# Path to OCI hook binaries in the *guest rootfs*.
# This does not affect host-side hooks which must instead be added to
# the OCI spec passed to the runtime.
#
# You can create a rootfs with hooks by customizing the osbuilder scripts:
# https://github.com/kata-containers/kata-containers/tree/main/tools/osbuilder
#
# Hooks must be stored in a subdirectory of guest_hook_path according to their
# hook type, i.e. "guest_hook_path/{prestart,poststart,poststop}".
# The agent will scan these directories for executable files and add them, in
# lexicographical order, to the lifecycle of the guest container.
# Hooks are executed in the runtime namespace of the guest. See the official documentation:
# https://github.com/opencontainers/runtime-spec/blob/v1.0.1/config.md#posix-platform-hooks
# Warnings will be logged if any error is encountered while scanning for hooks,
# but it will not abort container execution.
#guest_hook_path = "/usr/share/oci/hooks"

# disable applying SELinux on the VMM process (default false)
disable_selinux = @DEFDISABLESELINUX@

# disable applying SELinux on the container process
# If set to false, the type `container_t` is applied to the container process by default.
# Note: To enable guest SELinux, the guest rootfs must be CentOS that is created and built
# with `SELINUX=yes`.
# (default: true)
disable_guest_selinux = @DEFDISABLEGUESTSELINUX@

[factory]
# VM templating support. Once enabled, new VMs are created from template
# using vm cloning. They will share the same initial kernel, initramfs and
# agent memory by mapping it readonly. It helps speeding up new container
# creation and saves a lot of memory if there are many kata containers running
# on the same host.
#
# When disabled, new VMs are created from scratch.
#
# Note: Requires "initrd=" to be set ("image=" is not supported).
#
# Default false
#enable_template = true

[agent.@PROJECT_TYPE@]
# If enabled, make the agent display debug-level messages.
# (default: disabled)
#enable_debug = true

# Enable agent tracing.
#
# If enabled, the agent will generate OpenTelemetry trace spans.
#
# Notes:
#
# - If the runtime also has tracing enabled, the agent spans will be
#   associated with the appropriate runtime parent span.
# - If enabled, the runtime will wait for the container to shutdown,
#   increasing the container shutdown time slightly.
#
# (default: disabled)
#enable_tracing = true

# Comma separated list of kernel modules and their parameters.
# These modules will be loaded in the guest kernel using modprobe(8).
# The following example can be used to load two kernel modules with parameters
#  - kernel_modules=["e1000e InterruptThrottleRate=3000,3000,3000 EEE=1", "i915 enable_ppgtt=0"]
# The first word is considered as the module name and the rest as its parameters.
# Container will not be started when:
#  * A kernel module is specified and the modprobe command is not installed in the guest
#    or it fails loading the module.
#  * The module is not available in the guest or it doesn't met the guest kernel
#    requirements, like architecture and version.
#
kernel_modules = []

# Enable debug console.

# If enabled, user can connect guest OS running inside hypervisor
# through "kata-runtime exec <sandbox-id>" command

#debug_console_enabled = true

# Agent connection dialing timeout value in seconds
# (default: 45)
dial_timeout = 45

[runtime]
# If enabled, the runtime will log additional debug messages to the
# system log
# (default: disabled)
#enable_debug = true
#
# Internetworking model
# Determines how the VM should be connected to the
# the container network interface
# Options:
#
#   - macvtap
#     Used when the Container network interface can be bridged using
#     macvtap.
#
#   - none
#     Used when customize network. Only creates a tap device. No veth pair.
#
#   - tcfilter
#     Uses tc filter rules to redirect traffic from the network interface
#     provided by plugin to a tap interface connected to the VM.
#
internetworking_model = "@DEFNETWORKMODEL_STRATOVIRT@"

# disable guest seccomp
# Determines whether container seccomp profiles are passed to the virtual
# machine and applied by the kata agent. If set to true, seccomp is not applied
# within the guest
# (default: true)
disable_guest_seccomp = @DEFDISABLEGUESTSECCOMP@

# vCPUs pinning settings
# if enabled, each vCPU thread will be scheduled to a fixed CPU
# qualified condition: num(vCPU threads) == num(CPUs in sandbox's CPUSet)
#enable_vcpus_pinning = false

# Apply a custom SELinux security policy to the container process inside the VM.
# This is used when you want to apply a type other than the default `container_t`,
# so general users should not uncomment and apply it.
# (format: "user:role:type")
# Note: You cannot specify MCS policy with the label because the sensitivity levels and
# categories are determined automatically by high-level container runtimes such as containerd.
#guest_selinux_label = "@DEFGUESTSELINUXLABEL@"

# If enabled, the runtime will create opentracing.io traces and spans.
# (See https://www.jaegertracing.io/docs/getting-started).
# (default: disabled)
#enable_tracing = true

# Set the full url to the Jaeger HTTP Thrift collector.
# The default if not set will be "http://localhost:14268/api/traces"
#jaeger_endpoint = ""

# Sets the username to be used if basic auth is required for Jaeger.
#jaeger_user = ""

# Sets the password to be used if basic auth is required for Jaeger.
#jaeger_password = ""

# If enabled, the runtime will not create a network namespace for shim and hypervisor processes.
# This option may have some potential impacts to your host. It should only be used when you know what you're doing.
# `disable_new_netns` conflicts with `internetworking_model=tcfilter` and `internetworking_model=macvtap`. It works only
# with `internetworking_model=none`. The tap device will be in the host network namespace and can connect to a bridge
# (like OVS) directly.
# (default: false)
#disable_new_netns = true

# if enabled, the runtime will add all the kata processes inside one dedicated cgroup.
# The container cgroups in the host are not created, just one single cgroup per sandbox.
# The runtime caller is free to restrict or collect cgroup stats of the overall Kata sandbox.
# The sandbox cgroup path is the parent cgroup of a container with the PodSandbox annotation.
# The sandbox cgroup is constrained if there is no container type annotation.
# See: https://pkg.go.dev/github.com/kata-containers/kata-containers/src/runtime/virtcontainers#ContainerType
sandbox_cgroup_only = @DEFSANDBOXCGROUPONLY@

# If enabled, the runtime will attempt to determine appropriate sandbox size (memory, CPU) before booting the virtual machine. In
# this case, the runtime will not dynamically update the amount of memory and CPU in the virtual machine. This is generally helpful
# when a hardware architecture or hypervisor solutions is utilized which does not support CPU and/or memory hotplug.
# Compatibility for determining appropriate sandbox (VM) size:
# - When running with pods, sandbox sizing information will only be available if using Kubernetes >= 1.23 and containerd >= 1.6. CRI-O
#   does not yet support sandbox sizing annotations.
# - When running single containers using a tool like ctr, container sizing information will be available.
static_sandbox_resource_mgmt = @DEFSTATICRESOURCEMGMT_STRATOVIRT@

# If enabled, the runtime will not create Kubernetes emptyDir mounts on the guest filesystem. Instead, emptyDir mounts will
# be created on the host and shared via virtio-fs. This is potentially slower, but allows sharing of files from host to guest.
disable_guest_empty_dir = @DEFDISABLEGUESTEMPTYDIR@

# Enabled experimental feature list, format: ["a", "b"].
# Experimental features are features not stable enough for production,
# they may break compatibility, and are prepared for a big version bump.
# Supported experimental features:
# (default: [])
experimental = @DEFAULTEXPFEATURES@

# If enabled, user can run pprof tools with shim v2 process through kata-monitor.
# (default: false)
#enable_pprof = true

# Indicates the CreateContainer request timeout needed for the workload(s)
# It using guest_pull this includes the time to pull the image inside the guest
# Defaults to @DEFCREATECONTAINERTIMEOUT@ second(s)  
# Note: The effective timeout is determined by the lesser of two values: runtime-request-timeout from kubelet config 
# (https://kubernetes.io/docs/reference/command-line-tools-reference/kubelet/#:~:text=runtime%2Drequest%2Dtimeout) and create_container_timeout. 
# In essence, the timeout used for guest pull=runtime-request-timeout<create_container_timeout?runtime-request-timeout:create_container_timeout.
create_container_timeout = @DEFCREATECONTAINERTIMEOUT@

# Base directory of directly attachable network config.
# Network devices for VM-based containers are allowed to be placed in the
# host netns to eliminate as many hops as possible, which is what we
# called a "Directly Attachable Network". The config, set by special CNI
# plugins, is used to tell the Kata containers what devices are attached
# to the hypervisor.
# (default: /run/kata-containers/dans)
dan_conf = "@DEFDANCONF@"