Skip to content

Latest commit

 

History

History
59 lines (36 loc) · 2.62 KB

configuring-playbook-bridge-beeper-linkedin.md

File metadata and controls

59 lines (36 loc) · 2.62 KB

Setting up Beeper Linkedin (optional)

The playbook can install and configure beeper-linkedin for you, for bridging to LinkedIn Messaging. This bridge is based on the mautrix-python framework and can be configured in a similar way to the other mautrix bridges

See the project's documentation to learn what it does and why it might be useful to you.

matrix_beeper_linkedin_enabled: true

There are some additional things you may wish to configure about the bridge before you continue.

Encryption support is off by default. If you would like to enable encryption, add the following to your vars.yml file:

matrix_beeper_linkedin_configuration_extension_yaml: |
  bridge:
    encryption:
      allow: true
      default: true

If you would like to be able to administrate the bridge from your account it can be configured like this:

matrix_beeper_linkedin_configuration_extension_yaml: |
  bridge:
    permissions:
      '@YOUR_USERNAME:YOUR_DOMAIN': admin

You may wish to look at roles/custom/matrix-bridge-beeper-linkedin/templates/config.yaml.j2 to find other things you would like to configure.

Set up Double Puppeting

If you'd like to use Double Puppeting (hint: you most likely do), you have 2 ways of going about it.

Method 1: automatically, by enabling Shared Secret Auth

The bridge will automatically perform Double Puppeting if you enable Shared Secret Auth for this playbook.

This is the recommended way of setting up Double Puppeting, as it's easier to accomplish, works for all your users automatically, and has less of a chance of breaking in the future.

Usage

You then need to start a chat with @linkedinbot:YOUR_DOMAIN (where YOUR_DOMAIN is your base domain, not the matrix. domain).

Send login YOUR_LINKEDIN_EMAIL_ADDRESS to the bridge bot to enable bridging for your LinkedIn account.

If you run into trouble, check the Troubleshooting section below.

After successfully enabling bridging, you may wish to set up Double Puppeting, if you haven't already done so.

Troubleshooting

Bridge asking for 2FA even if you don't have 2FA enabled

If you don't have 2FA enabled and are logging in from a strange IP for the first time, LinkedIn will send an email with a one-time code. You can use this code to authorize the bridge session. In my experience, once the IP is authorized, you will not be asked again.