Skip to content

Latest commit

 

History

History
682 lines (503 loc) · 27.1 KB

dev-guide-proxysql-integration.md

File metadata and controls

682 lines (503 loc) · 27.1 KB
Raw
title summary
Integrate TiDB with ProxySQL
Introduce how to integrate TiDB with ProxySQL step by step.

Integrate TiDB with ProxySQL

This document describes how to integrate TiDB with ProxySQL using CentOS 7 as an example. If you want to integrate using other systems, refer to the Try Out section, which introduces how to deploy a test integration environment using Docker and Docker Compose. For more information, refer to:

1. Start TiDB

Test environment

  1. Download the TiDB source code, change to the tidb-server folder and run the go build command.

    git clone git@github.com:pingcap/tidb.git
cd tidb/tidb-server
go build

  2. Use the configuration file tidb-config.toml to start TiDB. The command is as follows:

    ${TIDB_SERVER_PATH} -config ./tidb-config.toml -store unistore -path "" -lease 0s > ${LOCAL_TIDB_LOG} 2>&1 &

    Note:

    • The preceding command uses unistore as the storage engine, which is a test storage engine in TiDB. Make sure that you use it in a test environment only.
    • TIDB_SERVER_PATH: the path of the compiled binary using go build. For example, if you execute the previous command under /usr/local, TIDB_SERVER_PATH is /usr/local/tidb/tidb-server/tidb-server.
    • LOCAL_TIDB_LOG: the log file path of TiDB.

TiUP, as the TiDB package manager, makes it easier to manage different cluster components in the TiDB ecosystem, such as TiDB, PD, and TiKV.

  1. Install TiUP:

    curl --proto '=https' --tlsv1.2 -sSf https://tiup-mirrors.pingcap.com/install.sh | sh

  2. Start TiDB in a test environment:

    tiup playground

Production environment

It is recommended to use TiDB Cloud directly when you need hosting TiDB services (for example, you cannot manage it yourself, or you need a cloud-native environment). To build a TiDB cluster in a production environment, refer to Create a TiDB cluster.

The production environment requires more steps than the test environment. To deploy an on-premises production cluster, it is recommended to refer to Deploy a TiDB cluster using TiUP and then deploy it based on hardware conditions.

2. Start ProxySQL

Install ProxySQL by yum

  1. Add the ProxySQL repository:

    cat > /etc/yum.repos.d/proxysql.repo << EOF
[proxysql]
name=ProxySQL YUM repository
baseurl=https://repo.proxysql.com/ProxySQL/proxysql-2.4.x/centos/\$releasever
gpgcheck=1
gpgkey=https://repo.proxysql.com/ProxySQL/proxysql-2.4.x/repo_pub_key
EOF

  2. Install ProxySQL:

    yum install proxysql

  3. Start ProxySQL:

    systemctl start proxysql

Other installation ways

To install ProxySQL using other ways, refer to the ProxySQL README or the ProxySQL installation documentation.

3. Configure ProxySQL

To use ProxySQL as a proxy for TiDB, you need to configure ProxySQL. The required configuration items are listed in the following sections. For more details about other configuration items, refer to the ProxySQL official documentation.

Simple introduction

ProxySQL uses a port to manage configuration, which is ProxySQL Admin interface, and a port to proxy, which is ProxySQL MySQL Interface.

  • ProxySQL Admin interface: To connect to the admin interface, you can use an admin user to read and write configuration, or use a stats user to read part of statistics (cannot read or write configuration). The default credentials are admin:admin and stats:stats. For security reasons, you can use the default credentials to connect locally, but to connect remotely, you need to configure a new user, which is often named radmin.
  • ProxySQL MySQL Interface: Used as a proxy to forward SQL to the configured service.

proxysql config flow

There are three layers in ProxySQL configurations: runtime, memory, and disk. You can change the configuration of the memory layer only. After modifying the configuration, you can use LOAD xxx TO runtime to make the configuration effective, and/or you can use SAVE xxx TO DISK to save to the disk to prevent configuration loss.

proxysql config layer

Configure TiDB server

You can add multiple TiDB servers in ProxySQL. To add TiDB servers, perform the following at ProxySQL Admin interface:

INSERT INTO mysql_servers(hostgroup_id, hostname, port) VALUES (0, '127.0.0.1', 4000);
LOAD mysql servers TO runtime;
SAVE mysql servers TO DISK;

Field description:

  • hostgroup_id: ProxySQL manages servers by hostgroup. To distribute SQL to these servers evenly, you can configure several servers that need load balancing to the same hostgroup. To distinguish the servers, such as read and write splitting, you can configure them to different hostgroup.
  • hostname: The IP or domain of the TiDB server.
  • port: The port of the TiDB server.

Configure Proxy login users

After adding a TiDB server user to ProxySQL, ProxySQL allows this user to log in ProxySQL MySQL Interface and create a connection with TiDB. Make sure that the user has appropriate permissions in TiDB. To add a TiDB server user, perform the following at ProxySQL Admin interface:

INSERT INTO mysql_users(username, password, active, default_hostgroup, transaction_persistent) VALUES ('root', '', 1, 0, 1);
LOAD mysql users TO runtime;
SAVE mysql users TO DISK;

Field description:

  • username: The user name.
  • password: The password.
  • active: Controls whether the user is active. 1 is active, and 0 is inactive. Only when the active is 1, the user can log in.
  • default_hostgroup: The default hostgroup used by the user, where SQL distributed to unless the query rule routes the traffic to a specific hostgroup.
  • transaction_persistent: 1 indicates persistent transaction. That is, when the user starts a transaction in a connection, all statements are routed to the same hostgroup until the transaction is committed or rolled back.

Configure ProxySQL by a configuration file

In addition to configuring using ProxySQL Admin interface, you can also configure ProxySQL using a configuration file. In the Configuring ProxySQL through the config file document, the configuration file should only be considered as a secondary way of initializing ProxySQL, not the primary way. The configuration file is only used when the SQLite is not created and will not be used after the SQLite is created. When using the configuration file to configure ProxySQL, you should delete SQLite first using the following command. But this loses configuration changes in ProxySQL Admin interface.

rm /var/lib/proxysql/proxysql.db

Alternatively, you can execute the LOAD xxx FROM CONFIG command to overwrite the current configuration.

The path of the configuration file is /etc/proxysql.cnf. To configure required configuration items in the preceding sections with the configuration file, the following takes mysql_servers and mysql_users as an example. To modify other items, refer to the /etc/proxysql.cnf.

mysql_servers =
(
    {
        address="127.0.0.1"
        port=4000
        hostgroup=0
        max_connections=2000
    }
)

mysql_users:
(
    {
        username = "root"
        password = ""
        default_hostgroup = 0
        max_connections = 1000
        default_schema = "test"
        active = 1
        transaction_persistent = 1
    }
)

To make the preceding modifications effective, use the systemctl restart proxysql command to restart ProxySQL. Then the SQLite database will be created automatically and the configuration file will not be ignored.

Other configuration items

The preceding configuration items are required. For optional configuration items, refer to Global variables.

4. Try out

To quick start the test environment, you can use Docker and Docker Compose. Make sure the ports 4000 and 6033 are not allocated.

git clone https://github.com/Icemap/tidb-proxysql-integration-test.git
cd tidb-proxysql-integration-test && docker-compose pull # Get the latest Docker images
sudo setenforce 0 # Only on Linux
docker-compose up -d

Warning:

DO NOT use the preceding commands to create an integration in production environments.

The preceding commands start an environment integrated TiDB with ProxySQL and runs two containers. To log in to the ProxySQL 6033 port, you can use the root username with an empty password. For more information about the configuration of containers, see docker-compose.yaml. For more details about the configuration of ProxySQL, see proxysql-docker.cnf.

To connect to TiDB, run the following command:

mysql -u root -h 127.0.0.1 -P 6033 -e "SELECT VERSION()"

An example result is as follows:

+--------------------+
| VERSION()          |
+--------------------+
| 5.7.25-TiDB-v6.1.0 |
+--------------------+

5. Configuration examples

Dependencies:

  • Docker
  • Docker Compose
  • MySQL Client

Clone the example code repository and change to the sample directory:

git clone https://github.com/Icemap/tidb-proxysql-integration-test.git
cd tidb-proxysql-integration-test

The following sections use tidb-proxysql-integration-test as the root directory.

Use Admin Interface to configure load balancing

Change to the sample directory:

cd example/load-balance-admin-interface

Run with a script

To configure load balancing using ProxySQL Admin Interface, you can run with the test-load-balance.sh script using the following command:

./test-load-balance.sh

Run step by step

The preceding test-load-balance.sh script can be run step by step as follows:

  1. Start three TiDB containers and a ProxySQL instance.

    docker-compose up -d
    • Start three TiDB containers using docker-compose. All the ports in the container are 4000 and host ports are 4001, 4002 and 4003.
    • After starting TiDB containers, the ProxySQL instance is started. The port of ProxySQL MySQL Interface in container is 6033 and the host port is 6034.
    • The port of ProxySQL Admin Interface is not exposed because it can only be accessed in the container.
    • For more details about the process, refer to docker-compose.yaml.

  2. In the three TiDB containers, create the same table schema with different data ('tidb-0', 'tidb-1' and 'tidb-2') to distinguish TiDB instances.

    mysql -u root -h 127.0.0.1 -P 4001 << EOF
DROP TABLE IF EXISTS test.test;
CREATE TABLE test.test (db VARCHAR(255));
INSERT INTO test.test (db) VALUES ('tidb-0');
EOF

mysql -u root -h 127.0.0.1 -P 4002 << EOF
DROP TABLE IF EXISTS test.test;
CREATE TABLE test.test (db VARCHAR(255));
INSERT INTO test.test (db) VALUES ('tidb-1');
EOF

mysql -u root -h 127.0.0.1 -P 4003 << EOF
DROP TABLE IF EXISTS test.test;
CREATE TABLE test.test (db VARCHAR(255));
INSERT INTO test.test (db) VALUES ('tidb-2');
EOF

  3. To execute the proxysql-prepare.sql in ProxySQL Admin Interface, execute the docker-compose exec command as follows:

    docker-compose exec proxysql sh -c "mysql -uadmin -padmin -h127.0.0.1 -P6032 < ./proxysql-prepare.sql"

    The preceding SQL file runs and triggers the following operations:

    1. Adds hosts of three TiDB Servers and set all hostgroup_id as 0.
    2. Makes the configuration of TiDb Servers effective and saves it on disk.
    3. Adds a root user with an empty password and sets default_hostgroup as 0, corresponding to the preceding hostgroup_id of TiDB Servers.
    4. Makes the configuration of the user effective and saves it on disk.

  4. Log in to ProxySQL MySQL Interface with the root user and query 5 times using the following statements. The expected output contains 'tidb-0', 'tidb-1', and 'tidb-2' three different values.

    mysql -u root -h 127.0.0.1 -P 6034 -t << EOF
SELECT * FROM test.test;
SELECT * FROM test.test;
SELECT * FROM test.test;
SELECT * FROM test.test;
SELECT * FROM test.test;
EOF

  5. To stop and remove containers and networks, you can use the following command:

    docker-compose down

Expected output

There are three different results ('tidb-0', 'tidb-1', and 'tidb-2') in the expected output, but the exact order cannot be expected. The following is one of the expected outputs:

# ./test-load-balance.sh
Creating network "load-balance-admin-interface_default" with the default driver
Creating load-balance-admin-interface_tidb-1_1 ... done
Creating load-balance-admin-interface_tidb-2_1 ... done
Creating load-balance-admin-interface_tidb-0_1 ... done
Creating load-balance-admin-interface_proxysql_1 ... done
+--------+
| db     |
+--------+
| tidb-2 |
+--------+
+--------+
| db     |
+--------+
| tidb-0 |
+--------+
+--------+
| db     |
+--------+
| tidb-1 |
+--------+
+--------+
| db     |
+--------+
| tidb-1 |
+--------+
+--------+
| db     |
+--------+
| tidb-1 |
+--------+
Stopping load-balance-admin-interface_proxysql_1 ... done
Stopping load-balance-admin-interface_tidb-0_1   ... done
Stopping load-balance-admin-interface_tidb-2_1   ... done
Stopping load-balance-admin-interface_tidb-1_1   ... done
Removing load-balance-admin-interface_proxysql_1 ... done
Removing load-balance-admin-interface_tidb-0_1   ... done
Removing load-balance-admin-interface_tidb-2_1   ... done
Removing load-balance-admin-interface_tidb-1_1   ... done
Removing network load-balance-admin-interface_default

Use Admin Interface to configure user split

Change to the sample directory:

cd example/user-split-admin-interface

Run with a script

To configure a user split traffic using ProxySQL Admin Interface, you can run the test-user-split.sh script using the following command:

./test-user-split.sh

Run step by step

The preceding test-user-split.sh script can be run step by step as follows:

  1. Start two TiDB containers and a ProxySQL instance.

    docker-compose up -d
    • Start two TiDB containers using docker-compose. All the ports in the container are 4000 and host ports are 4001 and 4002.
    • After you start TiDB containers, the ProxySQL instance is started. The port of ProxySQL MySQL Interface in the container is 6033 and the host port is 6034.
    • The port of ProxySQL Admin Interface is not exposed because it can only be accessed in the container.
    • For more details about the process, refer to docker-compose.yaml.

  2. In the two TiDB containers, create the same table schema with different data ('tidb-0' and 'tidb-1') to distinguish TiDB instances.

    mysql -u root -h 127.0.0.1 -P 4001 << EOF
DROP TABLE IF EXISTS test.test;
CREATE TABLE test.test (db VARCHAR(255));
INSERT INTO test.test (db) VALUES ('tidb-0');
EOF

mysql -u root -h 127.0.0.1 -P 4002 << EOF
DROP TABLE IF EXISTS test.test;
CREATE TABLE test.test (db VARCHAR(255));
INSERT INTO test.test (db) VALUES ('tidb-1');
EOF

  3. Create a new user for ProxySQL in the tidb-1 instance:

    mysql -u root -h 127.0.0.1 -P 4002 << EOF
CREATE USER 'root1' IDENTIFIED BY '';
GRANT ALL PRIVILEGES ON *.* TO 'root1'@'%';
FLUSH PRIVILEGES;
EOF

  4. To execute the proxysql-prepare.sql in ProxySQL Admin Interface, execute the docker-compose exec command as follows:

    docker-compose exec proxysql sh -c "mysql -uadmin -padmin -h127.0.0.1 -P6032 < ./proxysql-prepare.sql"

    The preceding SQL file runs and triggers the following operations:

    1. Adds hosts of two TiDB Servers. The hostgroup_id of tidb-0 is 0 and hostgroup_id of tidb-1 is 1.
    2. Makes the configuration of TiDb Servers effective and saves it on disk.
    3. Adds a root user with an empty password and sets default_hostgroup as 0. It indicates that the SQL routes to tidb-0 by default.
    4. Adds a user root1 with an empty password and sets default_hostgroup as 1. It indicates that the SQL routes to tidb-1 by default.
    5. Makes the configuration of the user effective and saves it on disk.

  5. Log in to ProxySQL MySQL Interface with the root user and root1 user. The expected output contains 'tidb-0' and 'tidb-1' two different values.

    mysql -u root -h 127.0.0.1 -P 6034 -e "SELECT * FROM test.test;"
mysql -u root1 -h 127.0.0.1 -P 6034 -e "SELECT * FROM test.test;"

  6. To stop and remove containers and networks, you can use the following command:

    docker-compose down

Expected output

The following is one of the expected outputs:

# ./test-user-split.sh
Creating network "user-split-admin-interface_default" with the default driver
Creating user-split-admin-interface_tidb-1_1 ... done
Creating user-split-admin-interface_tidb-0_1 ... done
Creating user-split-admin-interface_proxysql_1 ... done
+--------+
| db     |
+--------+
| tidb-0 |
+--------+
+--------+
| db     |
+--------+
| tidb-1 |
+--------+
Stopping user-split-admin-interface_proxysql_1 ... done
Stopping user-split-admin-interface_tidb-0_1   ... done
Stopping user-split-admin-interface_tidb-1_1   ... done
Removing user-split-admin-interface_proxysql_1 ... done
Removing user-split-admin-interface_tidb-0_1   ... done
Removing user-split-admin-interface_tidb-1_1   ... done
Removing network user-split-admin-interface_default

Use Admin Interface to configure proxy rules

Change to the sample directory:

cd example/proxy-rule-admin-interface

Run with script

To configure proxy rules to use different TiDB servers for executing read and write SQLs (if not matched, use default_hostgroup) using ProxySQL Admin Interface, you can run proxy-rule-split.sh using the following command:

./proxy-rule-split.sh

Run step by step

The preceding proxy-rule-split.sh script can be run step by step as follows:

  1. Start two TiDB containers and a ProxySQL instance.

    docker-compose up -d
    • Start two TiDB containers using docker-compose. All the ports in the container are 4000 and host ports are 4001 and 4002.
    • After you start TiDB containers, the ProxySQL instance is started. The port of ProxySQL MySQL Interface in the container is 6033 and the host port is 6034.
    • The port of ProxySQL Admin Interface is not exposed because it can only be accessed in the container.
    • For more details about the process, refer to docker-compose.yaml

  2. In the two TiDB containers, create the same table schema with different data ('tidb-0' and 'tidb-1') to distinguish TiDB instances.

    mysql -u root -h 127.0.0.1 -P 4001 << EOF
DROP TABLE IF EXISTS test.test;
CREATE TABLE test.test (db VARCHAR(255));
INSERT INTO test.test (db) VALUES ('tidb-0');
EOF

mysql -u root -h 127.0.0.1 -P 4002 << EOF
DROP TABLE IF EXISTS test.test;
CREATE TABLE test.test (db VARCHAR(255));
INSERT INTO test.test (db) VALUES ('tidb-1');
EOF

  3. To execute the proxysql-prepare.sql in ProxySQL Admin Interface, execute the docker-compose exec command as follows:

    docker-compose exec proxysql sh -c "mysql -uadmin -padmin -h127.0.0.1 -P6032 < ./proxysql-prepare.sql"

    The preceding SQL file runs and triggers the following operations:

    1. Adds hosts of two TiDB Servers. The hostgroup_id of tidb-0 is 0 and hostgroup_id of tidb-1 is 1.
    2. Makes the configuration of TiDB Servers effective and saves it on disk.
    3. Adds a user root with an empty password and sets default_hostgroup as 0. It indicates that the SQL routes to tidb-0 by default.
    4. Makes the configuration of the user effective and save it on disk.
    5. Adds the rule ^SELECT.*FOR UPDATE$ with rule_id as 1 and destination_hostgroup as 0. If a SQL statement match this rule, it used the TiDB Server with hostgroup as 0 (this rule forwards SELECT ... FOR UPDATE to the written database).
    6. Adds the rule ^SELECT with rule_id as 2 and destination_hostgroup as 1. If SQL statements match this rule, it uses the TiDB Server with hostgroup as 1.
    7. Makes the configuration of the rule effective and saves it on disk.

    Note:

    More details about the matching rules:

    • ProxySQL tries to match the rules one by one in the order of rule_id from smallest to largest.

    • ^ matches the beginning of a SQL statement and $ matches the end.

    • match_digest matches the parameterized SQL statement. For more details, see query_processor_regex.

    • Important parameters:

      • digest: match the parameterized Hash value.
      • match_pattern: match the raw SQL statements.
      • negate_match_pattern: if you set the value to 1, inverse the match for match_digest or match_pattern.
      • log: whether to log the query.
      • replace_pattern: if it is not empty, this is the pattern with which to replace the matched pattern.

    • For full parameters, see mysql_query_rules.

  4. Log in to ProxySQL MySQL Interface with the root user:

    mysql -u root -h 127.0.0.1 -P 6034

    You can run the following statements:

    • SELECT statement:

      SELECT * FROM test.test;

      The statement is expected to match rules with rule_id of 2 and forward the statement to the TiDB server tidb-1 with hostgroup of 1.

    • SELECT ... FOR UPDATE statement:

      SELECT * FROM test.test for UPDATE;

      The statement is expected to match rules with rule_id of 1 and forward the statement to the TiDB server tidb-0 with hostgroup of 0.

    • Transaction:

      BEGIN;
INSERT INTO test.test (db) VALUES ('insert this and rollback later');
SELECT * FROM test.test;
ROLLBACK;

      The BEGIN statement is expected to not match all rules. It uses the default_hostgroup of the user (It is 0) and thus forwards to the TiDB server tidb-0(hostgroup is 0). And ProxySQL enables user transaction_persistent by default, which will cause all statements within the same transaction to run in the same hostgroup. So the INSERT statement and SELECT * FROM test.test; will also be forwarded to the TiDB Server tidb-0(hostgroup is 0).

  5. To stop and remove containers and networks, you can use the following command:

    docker-compose down

Expected output

# ./proxy-rule-split.sh
Creating network "proxy-rule-admin-interface_default" with the default driver
Creating proxy-rule-admin-interface_tidb-1_1 ... done
Creating proxy-rule-admin-interface_tidb-0_1 ... done
Creating proxy-rule-admin-interface_proxysql_1 ... done
+--------+
| db     |
+--------+
| tidb-1 |
+--------+
+--------+
| db     |
+--------+
| tidb-0 |
+--------+
+--------------------------------+
| db                             |
+--------------------------------+
| tidb-0                         |
| insert this and rollback later |
+--------------------------------+
Stopping proxy-rule-admin-interface_proxysql_1 ... done
Stopping proxy-rule-admin-interface_tidb-0_1   ... done
Stopping proxy-rule-admin-interface_tidb-1_1   ... done
Removing proxy-rule-admin-interface_proxysql_1 ... done
Removing proxy-rule-admin-interface_tidb-0_1   ... done
Removing proxy-rule-admin-interface_tidb-1_1   ... done
Removing network proxy-rule-admin-interface_default

Use the configuration file to configure load balancing

To configure load balancing using the configuration file, you can run test-load-balance.sh using the following command:

cd example/load-balance-config-file
./test-load-balance.sh

The expected output is the same as that of Use Admin Interface to configure load balancing. The only change is using the configuration file to initialize the ProxySQL configuration.

Note:

  • The configuration of ProxySQL is stored in SQLite. The configuration file is only used when the SQLite is not created.

  • It is recommended that you use the configuration file only for initialization but not for modifying configuration items, because configuration through the ProxySQL Admin Interface supports the following features:

    • Input validation.
    • Remote configuration by any MySQL client.
    • Runtime configuration for maximum uptime (no need to restart).
    • Propagation the configuration to other ProxySQL nodes if ProxySQL Cluster is configured.