phy: add initial ECP5 SATA PHY based on LiteICLink, should operate co…

…rrectly at 3Gbps (SATA 2) but OOB not yet implemented.

litesata/phy/ecp5sataphy.py

@@ -0,0 +1,202 @@
+#
+# This file is part of LiteSATA.
+#
+# Copyright (c) 2020 Florent Kermarrec <florent@enjoy-digital.fr>
+# SPDX-License-Identifier: BSD-2-Clause
+
+from litesata.common import *
+from litesata.common import _PulseSynchronizer, _RisingEdge
+
+from migen.genlib.cdc import MultiReg
+from migen.genlib.resetsync import AsyncResetSynchronizer
+
+from liteiclink.serdes.serdes_ecp5 import SerDesECP5PLL, SerDesECP5
+
+# --------------------------------------------------------------------------------------------------
+
+class Pads:
+    def __init__(self, p, n):
+        self.p = p
+        self.n = n
+
+# --------------------------------------------------------------------------------------------------
+
+class ECP5LiteSATAPHYCRG(Module):
+    def __init__(self, serdes):
+        self.tx_reset = Signal()
+        self.rx_reset = Signal()
+
+        self.clock_domains.cd_sata_tx = ClockDomain()
+        self.clock_domains.cd_sata_rx = ClockDomain()
+
+        # TX clocking ------------------------------------------------------------------------------
+        #  (gen2) 150MHz from SerDes, sata_tx clk @ 150MHz (16-bits)
+        #  (gen1)  75MHz from SerDes, sata_tx clk @ 75MHz  (16-bits)
+        self.comb += self.cd_sata_tx.clk.eq(serdes.serdes.cd_tx.clk)
+
+        # RX clocking ------------------------------------------------------------------------------
+        #  (gen2) sata_rx recovered clk @ 150MHz (16-bits)
+        #  (gen1) sata_rx recovered clk @ 75MHz  (16-bits)
+        self.comb += self.cd_sata_rx.clk.eq(serdes.serdes.cd_rx.clk)
+
+        # Reset for SATA TX/RX clock domains -------------------------------------------------------
+        self.specials += AsyncResetSynchronizer(self.cd_sata_tx, ~serdes.serdes.tx_ready | self.tx_reset)
+        self.specials += AsyncResetSynchronizer(self.cd_sata_rx, ~serdes.serdes.rx_ready | self.rx_reset)
+
+# --------------------------------------------------------------------------------------------------
+
+class ECP5LiteSATAPHY(Module):
+    def __init__(self, refclk, pads, gen, clk_freq, data_width=16, channel=0):
+        assert data_width in [16]
+        # Common signals
+        self.data_width     = data_width
+
+        # Control
+        self.ready          = Signal() # o
+
+        self.tx_idle        = Signal() # i
+        self.tx_polarity    = Signal() # i
+
+        self.tx_cominit_stb = Signal() # i
+        self.tx_cominit_ack = Signal() # o
+        self.tx_comwake_stb = Signal() # i
+        self.tx_comwake_ack = Signal() # o
+
+        self.rx_idle        = Signal() # o
+        self.rx_cdrhold     = Signal() # i
+        self.rx_polarity    = Signal() # i
+
+        self.rx_cominit_stb = Signal() # o
+        self.rx_comwake_stb = Signal() # o
+
+        self.rxdisperr      = Signal(data_width//8) # o
+        self.rxnotintable   = Signal(data_width//8) # o
+
+        # Datapath
+        self.sink           = stream.Endpoint(phy_description(data_width))
+        self.source         = stream.Endpoint(phy_description(data_width))
+
+        # Receive Ports - 8b10b Decoder
+        self.rxcharisk      = Signal(data_width//8)
+
+        # Receive Ports - RX Data Path interface
+        self.rxdata         = Signal(data_width)
+
+        # Receive Ports - RX Ports for SATA
+        self.rxcominitdet   = Signal()
+        self.rxcomwakedet   = Signal()
+
+        # Transmit Ports - 8b10b Encoder Control Ports
+        self.txcharisk      = Signal(data_width//8)
+
+        # Transmit Ports - TX Data Path interface
+        self.txdata         = Signal(data_width)
+
+        # Transmit Ports - TX Ports for PCI Express
+        self.txelecidle     = Signal(reset=1)
+
+        # Transmit Ports - TX Ports for SATA
+        self.txcomfinish    = Signal()
+        self.txcominit      = Signal()
+        self.txcomwake      = Signal()
+
+        # Power-down signals
+        self.cpllpd         = Signal()
+        self.rxpd           = Signal()
+        self.txpd           = Signal()
+
+        # SerDes RefClk ----------------------------------------------------------------------------
+        if isinstance(refclk, (Signal, ClockSignal)):
+            pass
+        else:
+            refclk = Signal()
+            self.specials.extref0 = Instance("EXTREFB",
+                i_REFCLKP     = refclk_pads.p,
+                i_REFCLKN     = refclk_pads.n,
+                o_REFCLKO     = refclk,
+                p_REFCK_PWDNB = "0b1",
+                p_REFCK_RTERM = "0b1", # 100 Ohm
+            )
+            self.extref0.attr.add(("LOC", "EXTREF0"))
+
+        # Serdes PLL -------------------------------------------------------------------------------
+        serdes_pll = SerDesECP5PLL(refclk, refclk_freq=150e6, linerate={"gen2": 3e9, "gen1": 1.5e9}[gen])
+        self.submodules += serdes_pll
+
+        # SerDes -----------------------------------------------------------------------------------
+        self.submodules.serdes = serdes = SerDesECP5(
+            pll         = serdes_pll,
+            tx_pads     = Pads(p=pads.tx_p, n=pads.tx_n),
+            rx_pads     = Pads(p=pads.rx_p, n=pads.rx_n),
+            channel     = channel,
+        )
+        serdes.add_stream_endpoints()
+        self.comb += [
+            # RX
+            serdes.source.ready.eq(1),
+            self.rxdata.eq(serdes.source.ctrl),
+            self.rxcharisk.eq(serdes.source.data),
+
+            # TX
+            serdes.sink.valid.eq(1),
+            serdes.sink.ctrl.eq(self.txdata),
+            serdes.sink.data.eq(self.txcharisk),
+        ]
+
+        # Ready ------------------------------------------------------------------------------------
+        self.comb += self.ready.eq(serdes.init.ready)
+
+        # Specific / Generic signals encoding/decoding ---------------------------------------------
+        self.comb += [
+            self.txelecidle.eq(self.tx_idle | self.txpd),
+            self.tx_cominit_ack.eq(self.tx_cominit_stb & self.txcomfinish),
+            self.tx_comwake_ack.eq(self.tx_comwake_stb & self.txcomfinish),
+            self.rx_cominit_stb.eq(self.rxcominitdet),
+            self.rx_comwake_stb.eq(self.rxcomwakedet),
+        ]
+        self.submodules += _RisingEdge(self.tx_cominit_stb, self.txcominit)
+        self.submodules += _RisingEdge(self.tx_comwake_stb, self.txcomwake)
+
+        self.sync.sata_rx += [
+            self.source.valid.eq(1),
+            self.source.charisk.eq(self.rxcharisk),
+            self.source.data.eq(self.rxdata)
+        ]
+
+        self.sync.sata_tx += [
+            self.txcharisk.eq(self.sink.charisk),
+            self.txdata.eq(self.sink.data),
+            self.sink.ready.eq(1),
+        ]
+
+        # Internals and clock domain crossing ------------------------------------------------------
+        # sys_clk --> sata_tx clk
+        txpd       = Signal()
+        txelecidle = Signal(reset=1)
+        txcominit  = Signal()
+        txcomwake  = Signal()
+        self.specials += [
+            MultiReg(self.txpd,             txpd, "sata_tx"),
+            MultiReg(self.txelecidle, txelecidle, "sata_tx"),
+        ]
+        self.submodules += [
+            _PulseSynchronizer(self.txcominit,  "sys",  txcominit, "sata_tx"),
+            _PulseSynchronizer(self.txcomwake,  "sys",  txcomwake, "sata_tx"),
+        ]
+
+        # sata_tx clk --> sys clk
+        txcomfinish = Signal()
+        self.submodules += _PulseSynchronizer(txcomfinish, "sata_tx", self.txcomfinish, "sys")
+
+        # sata_rx clk --> sys clk
+        rxcominitdet = Signal()
+        rxcomwakedet = Signal()
+        rxratedone   = Signal()
+        rxdisperr    = Signal(data_width//8)
+        rxnotintable = Signal(data_width//8)
+        self.specials += [
+            MultiReg(rxcominitdet, self.rxcominitdet, "sys"),
+            MultiReg(rxcomwakedet, self.rxcomwakedet, "sys"),
+            MultiReg(rxdisperr,    self.rxdisperr,    "sys"),
+            MultiReg(rxnotintable, self.rxnotintable, "sys")
+        ]