Skip to content

v2.2.0.0_esp32
Compare
Choose a tag to compare
@xcguang xcguang released this 06 Jul 05:21
· 20 commits to release/v2.2.0.0_esp32 since this release
v2.2.0.0_esp32
93e09dc

v2.2.0.0 [ESP32 AT]

ESP32-AT Release v2.2.0.0

Documentation for v2.2.0.0 is available at https://docs.espressif.com/projects/esp-at/en/release-v2.2.0.0_esp32/
You can download the firmwares to use them, which support OTA from espressif‘s server.

ESP32-WROOM_AT_V2.2.0.0.zip
ESP32-WROVER_AT_V2.2.0.0.zip
ESP32-SOLO_AT_V2.2.0.0.zip
ESP32-PICO-D4_AT_V2.2.0.0.zip
ESP32-MINI-1_AT_Bin_V2.2.0.0.zip

ESP32-AT v2.2.0.0 is a major update for ESP32-AT v2.1.0.0.

Changelog

This is the list of changes since release v2.1.0.0:

Breaking Changes

  • esp-idf version updated to release v4.2 (efa6eca)
  • Compiler upgraded from v5.2.0 to v8.4.0
  • AT+CIPDOMAIN: Double quotation marks are added to the string parameters in the response
  • AT+BLESCAN: Double quotation marks are added to the mac address parameter in the response
  • AT commands supports IPv6 network now

Known Issue

  • Before start the softAP, AT+DHCP=0,2 command cannot disable DHCP (please disable DHCP after the softAP started)
  • It may fail to create BT connection again after BT disconnect

1. Feature

1.1 Wi-Fi

  • AT+CWRECONNCFG: Support to configure Wi-Fi reconnect interval and maximum retry times
  • AT+CWLAPOPT: Support to filter the scanned result by rssi and authmode
  • AT+CWJAP: Limit the range of listen interval to [1, 100]
  • AT+WPS: Support authmode floor configuration
  • AT+CWSMARTSTART: Support authmode floor configuration
  • AT+CWLAP: Support the information of 802.11 b/g/n in the response
  • AT+CWJAP: Support to configure timeout and pmf, and connect the last recorded AP
  • AT+CWSTATE: New Command to query Wi-Fi state

1.2 TCP/IP

  • AT+SYSMSG: Extended BIT2 parameter for passthrough mode
  • AT+CIUPDATE: Support to upgrade custom partitions and asynchronous OTA
  • AT+PING: Added an error message TIMEOUT for incorrect DNS
  • Modified tcp mss and wnd to improve compatibility
    • Modified tcp wnd, from 5744 to 5760
    • Modified tcp snd buf, from 5744 to 5760
  • Disabled setting AT+CIPSSLCCN, AT+CIPSSLCSNI, AT+CIPSSLCALPN, AT+CIPSSLCPSK if the link is already connected
  • AT+CIPSERVER: Added close_all_clients parameter to close all connections with the server created by AT+CIPSERVER
  • The following AT commands supports IPv6 since v2.2.0.0
    • AT+CIPV6
    • AT+CIPSTATUS
    • AT+CIPDOMAIN
    • AT+CIPSTART
    • AT+CIPSTARTEX
    • AT+CIPSERVER
    • AT+SAVETRANSLINK
    • AT+PING
    • AT+CIPDNS
    • AT+CIPSTA
    • AT+CIPAP
    • AT+CIFSR

1.3 Application Layer

  • AT+CIPSNTPCFG: Support to configure half timezone offset
  • AT+MQTTCONNCFG, AT+MQTTPUB, AT+MQTTPUBRAW, AT+MQTTPUB, AT+MQTTUNSUB command supports 128 bytes topic
  • AT+WEBSERVER: New command to support Wi-Fi provisioning via SoftAP and Captive Portal
  • AT+HTTPCLIENT: Support chunked data
  • AT+HTTPCLIENT: content-type parameter can be omitted now
  • AT+HTTPCPOST: New command to support long data post
  • Added qcloud support

1.4 System

  • AT+CMD: New command to query the supported AT commands list
  • AT+USERRAM: New command to alloc ram for host mcu to use it
  • AT+SYSREG: New command to read and write registers
  • AT+SYSRAM: Support to query the minimum heap size
  • AT+GMR: Added chip platform information in the response
  • Added ESP32-D2WD, ESP32-MINI-1 module support

1.5 Driver

Added the following new commands:

  • AT+DRVADC: Read ADC channel value
  • AT+DRVPWMINIT: Initialize PWM driver
  • AT+DRVPWMDUTY: Set PWM duty
  • AT+DRVPWMFADE: Set PWM fade
  • AT+DRVI2CINIT: Initialize I2C master driver
  • AT+DRVI2CRD: Read I2C data
  • AT+DRVI2CWRDATA: Write I2C data
  • AT+DRVI2CWRBYTES: Write no more than 4 bytes I2C data
  • AT+DRVSPICONFGPIO: Configure SPI GPIO
  • AT+DRVSPIINIT: Initialize SPI master driver
  • AT+DRVSPIRD: Read SPI data
  • AT+DRVSPIWR: Write SPI data

1.6 Bluetooth

  • AT+BTPOWER: Support to set BT tx power
  • AT+BLUFI: Support authmode floor configuration
  • AT+SYSMSG: Extended BIT2 parameter to support BLE and BT SPP messages
  • GATT Server supports service discovery
  • GATT client supports to create a local service
  • BLE supports to send long length packets of notify and indicate

2. Bugfix

2.1 Wi-Fi

  • Fixed AT+CWLAP issues
    • Fixed AT+CWLAP returned ERROR when total active scan time was more than 15 seconds
    • Fixed AT+CWLAP did not return ap in the response sometimes
    • Fixed AT+CWLAP blocked more the 10 seconds sometimes
    • Fixed AT+CWLAP rssi filter parameter could not work sometimes
    • Fixed AT+CWLAP could not scan valid ap by ssid and bssid
  • Fixed the issue that AT+CWMODE=1,1 could not auto-connect to AP when Wi-Fi mode switched from WIFI_MODE_NULL
  • Fixed the issue that AT+CWJAP may return the wrong error number
  • Fixed AT+WPS failed on multiple ap credentials case
  • Fixed AT+CIPSTA/AT+CIPAP could set the wrong IP address due to the lack of rigorous address check

2.2 TCP/IP

  • Fixed wrong state of AT+CIPSTATUS command
  • Fixed data error in passthrough mode with 2Mbps baud rate
  • Fixed AT+CIPRECONNINTV did not work immediately
  • Fixed that the received data was incomplete if the data was too large in softAP mode
  • Fixed AT+CIPSENDEX data was truncated in advance
  • Fixed AT+CIPSEND returned ERROR sometimes
  • Fixed crash when link id < 0
  • Fixed AT+CIPMUX=0 set error when all connections closed
  • Fixed SSL link may not disconnect when IP address changed
  • Fixed potential blocking when hardware flow control enabled
  • Fixed an issue of mistakenly printing "CLOSED" or "+LINK_CONN"
  • Fixed tcp server could not work again if the link closed and opened repeatedly
  • Fixed AT+SAVETRANSLINK could not work sometimes
  • Fixed AT+CIPSERVER could set mode to 2
  • Fixed AT+CIPSTART SSL connect failed if disabled ALPN by AT+CIPSSLCALPN=1,0
  • Fixed tcp send data lost in passthrough mode
  • Fixed AT+CIUPDATE failed over SSL if the version parameter was specified

2.3 Application Layer

  • Fixed AT+MQTTCONN returned ERROR when checking common name
  • Fixed AT+MQTTUSERCFG? crash after MQTT connected
  • Fixed AT+CIPSSLCALPN query command caused to reboot due to memory coverage
  • Fixed AT+MQTTCONN may cause wdt reset when input some special hostname
  • Fixed the issue that AT+HTTPCLIENT url failed to be omitted

2.4 System

  • Fixed compile error if disable BT and BLE
  • Fixed compile error when only use BluFi
  • Fixed AT+GSLP did not return OK sometimes
  • Fixed AT+GSLP may return ERROR when setting a long deep sleep time
  • Fixed AT+GSLP crash on PICO-D4 module
  • Fixed wrong uart pins disabled before deep-sleep
  • Fixed AT+SLEEPWKCFG did not check GPIO configuration issue
  • Fixed the crash when sending command with one redundant character "" before "\r\n"
  • Fixed AT+SLEEP=2 returned OK in softap mode
  • Fixed AT+SLEEP=0 cause to crash
  • Fixed silence firmware crash sometimes
  • Fixed build fail when disable customized partition
  • Fixed sdio read data error when length bigger than sdio list
  • Fixed light sleep could not be woken up by GPIO due to DFS

2.5 Bluetooth

  • Fixed the failure to re-enter GATT server SPP mode
  • Fixed the failure to write characteristic value
  • Fixed that BLE connection timeout resulted in no new connection being created
  • Fixed that BT default device name was empty
  • Fixed that BT failed to output scan results sometimes
  • Fixed the failure to exit the BT SPP mode even after disconnection
  • Fixed that some MAC address information was missing quotes
  • Fixed that BT device name overlength issue
  • Fixed that BT & BLE deinit failed
  • Fixed that classic BT could not discover some device names
  • Fixed the failure to init BLE parameters: BLE device name, BLE advertising parameters, BLE scan parameters and response, and BLE connection parameters
  • Fixed the incorrect message of AT+BTSTARTDISC
  • Fixed the crash caused by deiniting A2DP profile
  • Fixed the failure to detect incorrect BLE address type
  • Added the message for A2DP connection failure
  • Fixed the blufi name overlength issue
  • Fixed the crash caused by multi-connection
  • Fixed the crash caused by BLE connection failure
  • Fixed the crash caused by disabling modem sleep
  • Fixed the crash caused by deiniting BLE stack

3. Optimization

  • Added build.py script to simplify the compilation process and supported windows OS compilation
  • Refactored application directory
  • Removed deprecated GNU make
  • Removed cmake warnings
  • Supported spi & sdio example cmake
  • Removed at_http_webserver example
Assets 2
Loading