feat: add information for schedules

.github/README.md

@@ -27,7 +27,7 @@ Please see our [support](SUPPORT.md) documentation for further instructions.
 ## Copyright and License
 
 ```
-Copyright (c) 2022 Target Brands, Inc.
+Copyright (c) 2023 Target Brands, Inc.
 ```
 
-[Apache License, Version 2.0](http://www.apache.org/licenses/LICENSE-2.0)
+[Apache License, Version 2.0](http://www.apache.org/licenses/LICENSE-2.0)

LICENSE

@@ -186,7 +186,7 @@
       same "printed page" as the copyright notice for easier
       identification within third-party archives.
 
-   Copyright (c) 2022 Target Brands, Inc.
+   Copyright (c) 2023 Target Brands, Inc.
 
    Licensed under the Apache License, Version 2.0 (the "License");
    you may not use this file except in compliance with the License.
@@ -198,4 +198,4 @@
    distributed under the License is distributed on an "AS IS" BASIS,
    WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
    See the License for the specific language governing permissions and
-   limitations under the License.
+   limitations under the License.

content/installation/server/reference/_index.md

@@ -454,6 +454,26 @@ The variable can be provided as a comma-separated `list` (i.e. `myOrg1/myRepo1,m
 By default, no repositories are allowed to be enabled. To allow any repository to be enabled, provide a single value of `*`.
 {{% /alert %}}
 
+### VELA_SCHEDULE_ALLOWLIST
+
+This variable sets a group of repositories, from the SCM, that can create a schedule for a repo on the server.
+
+The variable can be provided as a comma-separated `list` (i.e. `myOrg1/myRepo1,myOrg1/myRepo2,myOrg2/*`).
+
+{{% alert title="Note:" color="primary" %}}
+By default, no repositories are allowed to create a schedule. To allow any repository to create a schedule, provide a single value of `*`.
+{{% /alert %}}
+
+### VELA_SCHEDULE_MINIMUM_FREQUENCY
+
+This variable sets the minimum frequency allowed to be set for a schedule.
+
+The variable can be provided as a `duration` (i.e. `5s`, `10m`).
+
+{{% alert title="Note:" color="primary" %}}
+This variable has a default value of `1h`.
+{{% /alert %}}
+
 ### VELA_SCM_ADDR
 
 This configuration variable is used by the [SCM component](/docs/installation/server/reference/scm/) for the server.
@@ -690,4 +710,4 @@ The variable can be provided as a `duration` (i.e. `5s`, `10m`).
 This variable has a default value of `5m`.\
 \
 The value should coordinate with the [`VELA_CHECK_IN`](/docs/installation/worker/reference/#vela_check_in) setting provided to the [worker](/docs/installation/worker/).
-{{% /alert %}}
+{{% /alert %}}

content/reference/api/schedule/_index.md

@@ -0,0 +1,14 @@
+---
+title: "Schedule"
+linkTitle: "Schedule"
+description: >
+  Learn how to use API endpoints for the schedule resource.
+---
+
+The below endpoints are available to operate on the `schedule` resource.
+
+{{% alert color="warning" %}}
+This section assumes you already know how to authenticate to the API.
+
+To authenticate to the API, please review the [authentication documentation](/docs/reference/api/authentication/).
+{{% /alert %}}

content/reference/api/schedule/add.md

@@ -0,0 +1,78 @@
+---
+title: "Add"
+linkTitle: "Add"
+description: >
+  Learn how to create a schedule.
+---
+
+## Endpoint
+
+```
+POST  /api/v1/schedules/:org/:repo
+```
+
+## Parameters
+
+The following parameters are used to configure the endpoint:
+
+| Name   | Description          |
+|--------|----------------------|
+| `org`  | name of organization |
+| `repo` | name of repository   |
+
+## Permissions
+
+COMING SOON!
+
+## Responses
+
+| Status Code | Description                                         |
+|-------------|-----------------------------------------------------|
+| `200`       | indicates the request has succeeded                 |
+| `401`       | indicates the user does not have proper permissions |
+
+## Sample
+
+{{% alert color="warning" %}}
+This section assumes you already know how to authenticate to the API.
+
+To authenticate to the API, please review the [authentication documentation](/docs/reference/api/authentication/).
+{{% /alert %}}
+
+#### File
+
+```json
+{
+  "name": "hourly",
+  "entry": "0 * * * *",
+  "active": true
+}
+```
+
+#### Request
+
+```sh
+curl \
+  -X POST \
+  -H "Authorization: Bearer <token>" \
+  -H "Content-Type: application/json" \
+  -d "@data.json" \
+  "http://127.0.0.1:8080/api/v1/schedules/github/octocat"
+```
+
+#### Response
+
+```json
+{
+  "id": 1,
+  "repo_id": 1,
+  "active": true,
+  "name": "hourly",
+  "entry": "0 * * * *",
+  "created_at": 1641314085,
+  "created_by": "octokitty",
+  "updated_at": 1641314085,
+  "updated_by": "octokitty",
+  "scheduled_at": 0
+}
+```

content/reference/api/schedule/get.md

@@ -0,0 +1,83 @@
+---
+title: "Get"
+linkTitle: "Get"
+description: >
+  Learn how to list schedules.
+---
+
+## Endpoint
+
+```
+GET  /api/v1/schedules/:org/:repo
+```
+
+## Parameters
+
+The following parameters are used to configure the endpoint:
+
+| Name   | Description          |
+|--------|----------------------|
+| `org`  | name of organization |
+| `repo` | name of repository   |
+
+## Permissions
+
+COMING SOON!
+
+## Responses
+
+| Status Code | Description                                         |
+|-------------|-----------------------------------------------------|
+| `200`       | indicates the request has succeeded                 |
+| `400`       | unable to retrieve the schedules                    |
+| `401`       | indicates the user does not have proper permissions |
+| `404`       | unable to retrieve the schedules                    |
+| `500`       | system error while retrieving the schedules         |
+
+## Sample
+
+{{% alert color="warning" %}}
+This section assumes you already know how to authenticate to the API.
+
+To authenticate to the API, please review the [authentication documentation](/docs/reference/api/authentication/).
+{{% /alert %}}
+
+#### Request
+
+```sh
+curl \
+  -X GET \
+  -H "Authorization: Bearer <token>" \
+  "http://127.0.0.1:8080/api/v1/schedules/github/octocat"
+```
+
+#### Response
+
+```json
+[
+  {
+    "id": 2,
+    "repo_id": 1,
+    "active": true,
+    "name": "nightly",
+    "entry": "0 0 * * *",
+    "created_at": 1641314086,
+    "created_by": "octokitty",
+    "updated_at": 1641314086,
+    "updated_by": "octokitty",
+    "scheduled_at": 0
+  },
+  {
+    "id": 1,
+    "repo_id": 1,
+    "active": true,
+    "name": "hourly",
+    "entry": "0 * * * *",
+    "created_at": 1641314085,
+    "created_by": "octokitty",
+    "updated_at": 1641314085,
+    "updated_by": "octokitty",
+    "scheduled_at": 0
+  }
+]
+```

content/reference/api/schedule/remove.md

@@ -0,0 +1,56 @@
+---
+title: "Remove"
+linkTitle: "Remove"
+description: >
+  Learn how to delete a schedule.
+---
+
+## Endpoint
+
+```
+DELETE  /api/v1/schedules/:org/:repo/:schedule
+```
+
+## Parameters
+
+The following parameters are used to configure the endpoint:
+
+| Name       | Description                      |
+|------------|----------------------------------|
+| `org`      | name of organization             |
+| `repo`     | name of repository               |
+| `schedule` | name of schedule from repository |
+
+## Permissions
+
+COMING SOON!
+
+## Responses
+
+| Status Code | Description                                         |
+|-------------|-----------------------------------------------------|
+| `200`       | indicates the request has succeeded                 |
+| `401`       | indicates the user does not have proper permissions |
+
+## Sample
+
+{{% alert color="warning" %}}
+This section assumes you already know how to authenticate to the API.
+
+To authenticate to the API, please review the [authentication documentation](/docs/reference/api/authentication/).
+{{% /alert %}}
+
+#### Request
+
+```sh
+curl \
+  -X DELETE \
+  -H "Authorization: Bearer <token>" \
+  "http://127.0.0.1:8080/api/v1/schedules/github/octocat/hourly"
+```
+
+#### Response
+
+```sh
+schedule "hourly" deleted
+```

content/reference/api/schedule/update.md

@@ -0,0 +1,77 @@
+---
+title: "Update"
+linkTitle: "Update"
+description: >
+  Learn how to modify a schedule.
+---
+
+## Endpoint
+
+```
+PUT  /api/v1/schedules/:org/:repo/:schedule
+```
+
+## Parameters
+
+The following parameters are used to configure the endpoint:
+
+| Name       | Description                      |
+|------------|----------------------------------|
+| `org`      | name of organization             |
+| `repo`     | name of repository               |
+| `schedule` | name of schedule from repository |
+
+## Permissions
+
+COMING SOON!
+
+## Responses
+
+| Status Code | Description                                         |
+|-------------|-----------------------------------------------------|
+| `200`       | indicates the request has succeeded                 |
+| `401`       | indicates the user does not have proper permissions |
+
+## Sample
+
+{{% alert color="warning" %}}
+This section assumes you already know how to authenticate to the API.
+
+To authenticate to the API, please review the [authentication documentation](/docs/reference/api/authentication/).
+{{% /alert %}}
+
+#### File
+
+```json
+{
+  "active": false
+}
+```
+
+#### Request
+
+```sh
+curl \
+  -X PUT \
+  -H "Authorization: Bearer <token>" \
+  -H "Content-Type: application/json" \
+  -d "@data.json" \
+  "http://127.0.0.1:8080/api/v1/schedules/github/octocat/hourly"
+```
+
+#### Response
+
+```json
+{
+  "id": 1,
+  "repo_id": 1,
+  "active": false,
+  "name": "hourly",
+  "entry": "0 * * * *",
+  "created_at": 1641314085,
+  "created_by": "octokitty",
+  "updated_at": 1641314086,
+  "updated_by": "octokitty",
+  "scheduled_at": 0
+}
+```