Skip to content

Latest commit

 

History

History
37 lines (32 loc) · 2.58 KB

README.md

File metadata and controls

37 lines (32 loc) · 2.58 KB

NPM

zigbee-herdsman-converters

Collection of device converters to be used with zigbee-herdsman.

Contributing

See Zigbee2MQTT how to support new devices.

Submitting a pull request

If you'd like to submit a pull request, you should run the following commands to ensure your changes will pass the tests:

npm install
npm run lint
npm test

If any of those commands finish with an error your PR won't pass the tests and will likely be rejected.

Documentation of definition meta property

  • multiEndpoint: enables the multi endpoint functionallity in e.g. fromZigbee.on_off, example: normally this converter would return {"state": "OFF"}, when multiEndpoint is enabled the 'endpoint' method of the device definition will be called to determine the endpoint name which is then used as key e.g. {"state_left": "OFF"}. Only needed when device sends the same attribute from multiple endpoints. (default: false)
  • disableDefaultResponse: used by toZigbee converters to disable the default response of some devices as they don't provide one. (default: false)
  • applyRedFix: see toZigbee.light_color (default: false)
  • enhancedHue: see toZigbee.light_color (default: true)
  • supportsHueAndSaturation: see toZigbee.light_color (default: false)
  • timeout: timeout for commands to this device used in toZigbee. (default: 10000)
  • coverInverted: Set to true for cover controls that report position=100 as open (default: false)
  • coverStateFromTilt: Set cover state based on tilt
  • turnsOffAtBrightness1: Indicates light turns off when brightness 1 is set (default: false)
  • pinCodeCount: Amount of pincodes the lock can handle
  • disableActionGroup: Prevents some converters adding the action_group to the payload (default: false)
  • tuyaThermostatSystemMode/tuyaThermostatPreset: TuYa specific thermostat options
  • thermostat: see e.g. HT-08 definition
    • {dontMapPIHeatingDemand: true}: do not map piHeatingDemand from 0-255 -> 0-100, see fromZigbee.thermostat (default: false)
  • battery:
    • {dontDividePercentage: true}: prevents batteryPercentageRemainig from being divided (ZCL 200=100%, but some report 100=100%) (default: false)
    • {voltageToPercentage: '3V_2100'}: convert voltage to percentage using specified option. See utils.batteryVoltageToPercentage() (default: null, no voltage to percentage conversion)
  • fanStateOn: value used for fan_mode when using fan_state="ON", the default is "on"