Can't change country_code when using pcieuart8997_combo_v4.bin FW

[ThaiKien96]

I am using pcieuart8997_combo_v4.bin FW from branch lf-5.15.32_2.0.0.
When I use hostapd to set country_code to the US for PCIe 8997 wifi module and recheck by the iw req get command, the country code hasn't changed and the entire 5GHz channels have been masked (no IR).

$ iw reg set US
$ iw reg get
global
country 00: DFS-UNSET
        (2402 - 2472 @ 40), (6, 20), (N/A)
        (2457 - 2482 @ 20), (6, 20), (N/A), AUTO-BW, PASSIVE-SCAN
        (2474 - 2494 @ 20), (6, 20), (N/A), NO-OFDM, PASSIVE-SCAN
        (5170 - 5250 @ 80), (6, 20), (N/A), AUTO-BW, PASSIVE-SCAN
        (5250 - 5330 @ 80), (6, 20), (0 ms), DFS, AUTO-BW, PASSIVE-SCAN
        (5490 - 5730 @ 160), (6, 20), (0 ms), DFS, PASSIVE-SCAN
        (5735 - 5835 @ 80), (6, 20), (N/A), PASSIVE-SCAN
        (57240 - 63720 @ 2160), (N/A, 0), (N/A)
$ iw list
Wiphy mwiphy0
        wiphy index: 0
        max # scan SSIDs: 10
        max scan IEs length: 256 bytes
        max # sched scan SSIDs: 10
        max # match sets: 10
        Fragmentation threshold: 2346
        RTS threshold: 2347
        Retry short long limit: 9
        Coverage class: 0 (up to 0m)
        Device supports AP-side u-APSD.
        Device supports T-DLS.
        Supported Ciphers:
                * WEP40 (00-0f-ac:1)
                * WEP104 (00-0f-ac:5)
                * TKIP (00-0f-ac:2)
                * CCMP-128 (00-0f-ac:4)
                * WPI-SMS4 (00-14-72:1)
                * CMAC (00-0f-ac:6)
                * GMAC-128 (00-0f-ac:11)
                * GMAC-256 (00-0f-ac:12)
                * GCMP-128 (00-0f-ac:8)
                * GCMP-256 (00-0f-ac:9)
                * CCMP-256 (00-0f-ac:10)
        Available Antennas: TX 0x3 RX 0x3
        Configured Antennas: TX 0x3 RX 0x3
        Supported interface modes:
                 * managed
                 * AP
                 * P2P-client
                 * P2P-GO
        Band 1:
                Capabilities: 0x17ff
                        RX LDPC
                        HT20/HT40
                        SM Power Save disabled
                        RX Greenfield
                        RX HT20 SGI
                        RX HT40 SGI
                        TX STBC
                        RX STBC 3-streams
                        HT Delayed Block Ack
                        Max AMSDU length: 3839 bytes
                        DSSS/CCK HT40
                Maximum RX AMPDU length 65535 bytes (exponent: 0x003)
                Minimum RX AMPDU time spacing: No restriction (0x00)
                HT TX/RX MCS rate indexes supported: 0-15, 32
                VHT Capabilities (0x33d179b0):
                        Max MPDU length: 3895
                        Supported Channel Width: neither 160 nor 80+80
                        RX LDPC
                        short GI (80 MHz)
                        TX STBC
                        SU Beamformer
                        SU Beamformee
                        MU Beamformee
                        +HTC-VHT
                        RX antenna pattern consistency
                        TX antenna pattern consistency
                VHT RX MCS set:
                        1 streams: MCS 0-9
                        2 streams: MCS 0-9
                        3 streams: not supported
                        4 streams: not supported
                        5 streams: not supported
                        6 streams: not supported
                        7 streams: not supported
                        8 streams: not supported
                VHT RX highest supported: 780 Mbps
                VHT TX MCS set:
                        1 streams: MCS 0-9
                        2 streams: MCS 0-9
                        3 streams: not supported
                        4 streams: not supported
                        5 streams: not supported
                        6 streams: not supported
                        7 streams: not supported
                        8 streams: not supported
                VHT TX highest supported: 780 Mbps
                Bitrates (non-HT):
                        * 1.0 Mbps
                        * 2.0 Mbps
                        * 5.5 Mbps
                        * 11.0 Mbps
                        * 6.0 Mbps
                        * 9.0 Mbps
                        * 12.0 Mbps
                        * 18.0 Mbps
                        * 24.0 Mbps
                        * 36.0 Mbps
                        * 48.0 Mbps
                        * 54.0 Mbps
                Frequencies:
                        * 2412 MHz [1] (20.0 dBm)
                        * 2417 MHz [2] (20.0 dBm)
                        * 2422 MHz [3] (20.0 dBm)
                        * 2427 MHz [4] (20.0 dBm)
                        * 2432 MHz [5] (20.0 dBm)
                        * 2437 MHz [6] (20.0 dBm)
                        * 2442 MHz [7] (20.0 dBm)
                        * 2447 MHz [8] (20.0 dBm)
                        * 2452 MHz [9] (20.0 dBm)
                        * 2457 MHz [10] (20.0 dBm)
                        * 2462 MHz [11] (20.0 dBm)
                        * 2467 MHz [12] (20.0 dBm) (no IR)
                        * 2472 MHz [13] (20.0 dBm) (no IR)
                        * 2484 MHz [14] (20.0 dBm) (no IR)
        Band 2:
                Capabilities: 0x17ff
                        RX LDPC
                        HT20/HT40
                        SM Power Save disabled
                        RX Greenfield
                        RX HT20 SGI
                        RX HT40 SGI
                        TX STBC
                        RX STBC 3-streams
                        HT Delayed Block Ack
                        Max AMSDU length: 3839 bytes
                        DSSS/CCK HT40
                Maximum RX AMPDU length 65535 bytes (exponent: 0x003)
                Minimum RX AMPDU time spacing: No restriction (0x00)
                HT TX/RX MCS rate indexes supported: 0-15, 32
                VHT Capabilities (0x33d179b0):
                        Max MPDU length: 3895
                        Supported Channel Width: neither 160 nor 80+80
                        RX LDPC
                        short GI (80 MHz)
                        TX STBC
                        SU Beamformer
                        SU Beamformee
                        MU Beamformee
                        +HTC-VHT
                        RX antenna pattern consistency
                        TX antenna pattern consistency
                VHT RX MCS set:
                        1 streams: MCS 0-9
                        2 streams: MCS 0-9
                        3 streams: not supported
                        4 streams: not supported
                        5 streams: not supported
                        6 streams: not supported
                        7 streams: not supported
                        8 streams: not supported
                VHT RX highest supported: 780 Mbps
                VHT TX MCS set:
                        1 streams: MCS 0-9
                        2 streams: MCS 0-9
                        3 streams: not supported
                        4 streams: not supported
                        5 streams: not supported
                        6 streams: not supported
                        7 streams: not supported
                        8 streams: not supported
                VHT TX highest supported: 780 Mbps
                Bitrates (non-HT):
                        * 6.0 Mbps
                        * 9.0 Mbps
                        * 12.0 Mbps
                        * 18.0 Mbps
                        * 24.0 Mbps
                        * 36.0 Mbps
                        * 48.0 Mbps
                        * 54.0 Mbps
                Frequencies:
                        * 5180 MHz [36] (20.0 dBm) (no IR)
                        * 5200 MHz [40] (20.0 dBm) (no IR)
                        * 5220 MHz [44] (20.0 dBm) (no IR)
                        * 5240 MHz [48] (20.0 dBm) (no IR)
                        * 5260 MHz [52] (20.0 dBm) (no IR, radar detection)
                        * 5280 MHz [56] (20.0 dBm) (no IR, radar detection)
                        * 5300 MHz [60] (20.0 dBm) (no IR, radar detection)
                        * 5320 MHz [64] (20.0 dBm) (no IR, radar detection)
                        * 5500 MHz [100] (20.0 dBm) (no IR, radar detection)
                        * 5520 MHz [104] (20.0 dBm) (no IR, radar detection)
                        * 5540 MHz [108] (20.0 dBm) (no IR, radar detection)
                        * 5560 MHz [112] (20.0 dBm) (no IR, radar detection)
                        * 5580 MHz [116] (20.0 dBm) (no IR, radar detection)
                        * 5600 MHz [120] (20.0 dBm) (no IR, radar detection)
                        * 5620 MHz [124] (20.0 dBm) (no IR, radar detection)
                        * 5640 MHz [128] (20.0 dBm) (no IR, radar detection)
                        * 5660 MHz [132] (20.0 dBm) (no IR, radar detection)
                        * 5680 MHz [136] (20.0 dBm) (no IR, radar detection)
                        * 5700 MHz [140] (20.0 dBm) (no IR, radar detection)
                        * 5720 MHz [144] (20.0 dBm) (no IR, radar detection)
                        * 5745 MHz [149] (20.0 dBm) (no IR)
                        * 5765 MHz [153] (20.0 dBm) (no IR)
                        * 5785 MHz [157] (20.0 dBm) (no IR)
                        * 5805 MHz [161] (20.0 dBm) (no IR)
                        * 5825 MHz [165] (20.0 dBm) (no IR)
                        * 5845 MHz [169] (disabled)
                        * 5865 MHz [173] (disabled)
                        * 5885 MHz [177] (disabled)
        Supported commands:
                 * new_interface
                 * set_interface
                 * new_key
                 * start_ap
                 * new_station
                 * set_bss
                 * authenticate
                 * associate
                 * deauthenticate
                 * disassociate
                 * set_pmksa
                 * del_pmksa
                 * flush_pmksa
                 * remain_on_channel
                 * set_tx_bitrate_mask
                 * frame
                 * frame_wait_cancel
                 * set_wiphy_netns
                 * set_channel
                 * tdls_mgmt
                 * tdls_oper
                 * start_sched_scan
                 * probe_client
                 * register_beacons
                 * testmode
                 * connect
                 * disconnect
                 * channel_switch
                 * set_qos_map
                 * update_ft_ies
        WoWLAN support:
                 * wake up on anything (device continues operating normally)
                 * wake up on magic packet
                 * wake up on pattern match, up to 10 patterns of 1-20 bytes,
                   maximum packet offset 50 bytes
        software interface modes (can always be added):
        valid interface combinations:
                 * #{ managed, AP, monitor, P2P-client, P2P-GO } <= 4,
                   total <= 4, #channels <= 1, STA/AP BI must match, radar detect widths: { 20 MHz (no HT), 20 MHz, 40 MHz, 80 MHz }

        Device supports TX status socket option.
        Device has client inactivity timer.
        Device supports SAE with AUTHENTICATE command
        Device supports scan flush.
        Userspace should do OBSS scan and generate 20/40 coex reports
        Device supports TDLS channel switching
        Device supports randomizing MAC-addr in scans.
        Device supports randomizing MAC-addr in sched scans.
        max # scan plans: 3
        max scan plan interval: -1
        max scan plan iterations: 100
        Supported TX frame types:
                 * managed: 0x50 0xd0
                 * AP: 0x00 0x10 0x20 0x30 0x40 0x50 0x60 0x70 0x80 0x90 0xa0 0xb0 0xc0 0xd0 0xe0 0xf0
                 * P2P-client: 0x50 0xd0
                 * P2P-GO: 0x10 0x30 0x50 0xb0 0xd0
        Supported RX frame types:
                 * managed: 0x40 0xd0
                 * AP: 0x00 0x20 0x40 0xa0 0xb0 0xc0 0xd0
                 * P2P-client: 0x40 0xd0
                 * P2P-GO: 0x00 0x20 0x40 0xa0 0xb0 0xc0 0xd0
        Coalesce support:
                 * Maximum 8 coalesce rules supported
                 * Each rule contains upto 4 patterns of 1-20 bytes,
                   maximum packet offset 100 bytes
                 * Maximum supported coalescing delay 100 msecs
        Maximum associated stations in AP mode: 8
        Supported extended features:
                * [ RRM ]: RRM
                * [ SET_SCAN_DWELL ]: scan dwell setting
                * [ MGMT_TX_RANDOM_TA ]: randomized TA while not associated
                * [ MGMT_TX_RANDOM_TA_CONNECTED ]: randomized TA while associated

Please help me check it.

[precla]

Had same issue, but with 9098. What worked for me:
iw reg set XX # XX -> your country code, for example US
iw reg reload

Now it seems to always apply iw reg set XX without reload...