-
Notifications
You must be signed in to change notification settings - Fork 201
New issue
Have a question about this project? Sign up for a free GitHub account to open an issue and contact its maintainers and the community.
By clicking “Sign up for GitHub”, you agree to our terms of service and privacy statement. We’ll occasionally send you account related emails.
Already on GitHub? Sign in to your account
Cable Routing improving proposal #38
Comments
Hello Pau, thanks for your suggestions. I am surprised to hear that you have so much trouble with the wire routing through the hip. What kind of wires are you using? I first pull the encoder connector and wires through - then the three motor phase wires - one after the other. Best. Felix |
We've had problems with the cables getting twisted over each other and stripping the insulation, this should be alleviated with looser cable routing. Also when replacing the broken wires, disassembly and reassembly was very tedious. Imho, I think this problems would be solved by allowing more space for the cables to pass. |
Hi Pau, o.k. - thanks for your suggestion and the stl file. Best, |
good afternoon, thanks for the improvement, could you please provide a model in the extension .step or .SLDPRT, not .STL because all sizes are lost in it. |
Hi, I'm Pau from PAL Robotics, we have found some improvement in the part "hip_fe_module_shell" that would greatly improve cable routing. We've had problems assembling the shoulder and this would ease manufacturing without changing the robot's geometry.
Before:
After:
It only modifies the external shell and help routing. I can send you the modified part if you wish.
The text was updated successfully, but these errors were encountered: