-
Notifications
You must be signed in to change notification settings - Fork 74
/
run.dat
40 lines (40 loc) · 1.42 KB
/
run.dat
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
#sets the wifi interface to use, is wlan0 in most cases
interface=wlan0
#driver to use, nl80211 works in most cases
driver=nl80211
#sets the ssid of the virtual wifi access point
ssid=<SSID>
#sets the mode of wifi, depends upon the devices you will be using. It can be a,b,g,n. Setting to g ensures backward compatiblity.
hw_mode=g
#sets the channel for your wifi
channel=6
#macaddr_acl sets options for mac address filtering. 0 means "accept unless in deny list"
macaddr_acl=0
#setting ignore_broadcast_ssid to 1 will disable the broadcasting of ssid
ignore_broadcast_ssid=0
#Sets authentication algorithm
#1 - only open system authentication
#2 - both open system authentication and shared key authentication
auth_algs=1
#####Sets WPA and WPA2 authentication#####
#wpa option sets which wpa implementation to use
#1 - wpa only
#2 - wpa2 only
#3 - both
wpa=3
#sets wpa passphrase required by the clients to authenticate themselves on the network
wpa_passphrase=<PASS>
#sets wpa key management
wpa_key_mgmt=WPA-PSK
#sets encryption used by WPA
wpa_pairwise=TKIP
#sets encryption used by WPA2
rsn_pairwise=CCMP
#################################
#####Sets WEP authentication#####
#WEP is not recommended as it can be easily broken into
#wep_default_key=0
#wep_key0=qwert #5,13, or 16 characters
#optionally you may also define wep_key2, wep_key3, and wep_key4
#################################
#For No encryption, you don't need to set any options