Skip to content

Latest commit

 

History

History
59 lines (45 loc) · 2.35 KB

DEBUGGING.md

File metadata and controls

59 lines (45 loc) · 2.35 KB
Raw

Debugging

General Steps

Check that:

  1. TP-Link Deco integration is the latest published version

  2. TP-Link Deco router firmware is up to date

  3. Enable debug logging in configuration.yaml by adding these lines:

    logger:
  logs:
    custom_components.tplink_deco: debug

  4. Navigate to Settings -> System -> Logs

  5. Type tplink_deco into Search logs text box

  6. Click LOAS FULL LOGS button

  7. Copy logs into bug. Redact any sensitive information you see.

Additional Debugging

If the debug logs show that a call is failing because of one of the following reasons:

  • Error response from router
  • Timed out

Follow the below steps to check that the router is behaving as expected.

  1. Disable the TPLink Deco integration if it is enabled (If it is enabled it will keep logging you out)

  2. Enable the browser developer console and go to the network tab

  3. Login to the admin UI page

  4. Go to the page with the failing call (Example: Go to page that lists clients if the list clients call is failing)

    • For the List Clients call, make sure to select a specific deco to list clients for

  5. Find the call that is failing.

    Call Example URL
    Fetch Keys http://192.168.0.1/cgi-bin/luci/;stok=/login?form=keys
    Fetch Auth http://192.168.0.1/cgi-bin/luci/;stok=/login?form=auth
    Login http://192.168.0.1/cgi-bin/luci/;stok=/login?form=login
    List Decos http://192.168.0.1/cgi-bin/luci/;stok=0123456789abcdef/admin/device?form=device_list
    List Clients http://192.168.0.1/cgi-bin/luci/;stok=0123456789abcdef/admin/client?form=client_list

  6. Copy the request

    • If the request does NOT have data= param, then just copy the whole payload to the bug
    • If the request has a payload with data= param, then copy the part right after data= Screenshot. Then in the developer console type the following code:
    data = "<insert text after data= here>";
jQuery.encrypt.encryptManager.encryptor.AesDecrypt(decodeURIComponent(data));

    Then copy the output to the bug.

  7. If the call was successful but the parsing on the integration failed. Copy the response.

    • If the response does NOT have a "data": key, then copy the whole response.
    • If the response has a "data": key, then copy the text after that and decode it in the same way as step 6.