Skip to content

Latest commit

 

History

History
9 lines (6 loc) · 462 Bytes

README.md

File metadata and controls

9 lines (6 loc) · 462 Bytes
Raw

gCarvin

Grbl fork for the Carvey machine

Compiling and Flashing

You can compile and flash a Carvey using the Arduino IDE. You just have to put this repo into the libraries folder (by default ~/Documents/Arduino/libraries) or symlink this directory there.

Then re-open the Arduino IDE and look under Examples -> gCarvin -> grblUpload. That sketch will compile and upload the firmware.

Make sure to have the "Board" type set as "Arduino Mega 2560".