Skip to content

Latest commit

 

History

History
147 lines (90 loc) · 8.22 KB

nix-installation.md

File metadata and controls

147 lines (90 loc) · 8.22 KB
Raw

About this document

This document explains how to

  • install the Nix package manager
  • set up Nix to download pre-built packages from a cache (optionally)
  • set up the Nix's experimental flakes feature (optionally)

If you're unsure if you want to enable flakes or not, read the provided introduction to Nix.

Prerequisites

This project supports Linux on x86-64 machines.

All we need to use this project is to install Nix, which this document covers. Nix can be installed on a variety of Linux and Mac systems. Nix can also be installed in Windows via the Windows Subsystem for Linux (WSL). Installation on WSL may involve steps not covered in this documentation, though.

Note, some users may be using NixOS, a Linux operating system built on top of Nix. Those users already have Nix and don't need to install it separately. You don't need to use NixOS to use this project.

Level of commitment/risk

Unless you're on NixOS, you're likely already using another package manager for your operating system (APT, DNF, etc.). You don't have to worry about Nix or packages installed by Nix conflicting with anything already on your system. Running Nix alongside other package managers is safe.

All the files of a Nix package are located under /nix a directory, isolated from any other package manager. Nix won't touch critical directories under /usr or /var. Nix then symlinks files under /nix to your home directory under dot-files like ~/.nix-profile. There is also some light configuration under /etc/nix.

Hopefully, this alleviates any worry about installing a complex program on your machine. Uninstallation is not too much more than deleting everything under /nix.

Nix package manager installation

NOTE: You don't need this step if you're running NixOS, which comes with Nix baked in.

Though the latest version of Nix is Nix 2.24.7, we'll be installing the version that the last release of NixOS (24.05) uses, specifically Nix 2.18.5. As discussed in the included introduction to Nix, this version is considered stable by the Nix community.

The following command calls the official installation script for the recommended version of Nix. Note, this script will require sudo access.

sh <(curl -L https://releases.nixos.org/nix/nix-2.18.5/install) --daemon

The --daemon switch installs Nix in the multi-user mode, which is generally recommended (single-user installation with --no-daemon instead is recommended for WSL). The script reports everything it does and touches.

After installation, you may have to exit your terminal session and log back in to have environment variables configured, which puts Nix executables on your PATH.

Every six months or so, a new version of NixOS releases, and you should consider upgrading your installation of Nix. For NixOS 24.05, this command upgrades Nix:

NIXOS_VERSION="24.05"
NIX_STORE_PATHS_URL=https://github.com/NixOS/nixpkgs/raw/$NIXOS_VERSION/nixos/module/installer/tools/nix-fallback-paths.nix
sudo nix upgrade-nix --nix-store-paths-url "$NIX_STORE_PATHS_URL"

For new releases of NixOS, use the same command with new NIXOS_VERSION.

The Nix manual describes other methods of installing Nix that may suit you more. If you later want to uninstall Nix, see the uninstallation steps documented in the Nix manual.

Cache setup

This project pushes built Nix packages to two substituters, Garnix and Cachix, as part of its continuous integration. It's recommended to install at least one of these. Configuring both to have a fallback works as well. Garnix caches a few more packages than Cachix. Both should have similar availability.

We need to extend two settings in either the system-level Nix configuration file at /etc/nix/nix.conf, or the user-level configuration at ~/.config/nix/nix.config (which may not exist yet).

The choice of whether to perform these settings system-level or user-level is up to your preference.

First we need to specify one or both of the following substituters:

For each substituter we use, we need to also configure Nix to trust their public keys:

  • cache.garnix.io:CTFPyKSLcx5RMJKfLo5EEPUObbA78b0YQ2DTCJXqr9g=
  • shajra.cachix.org-1:V0x7Wjgd/mHGk2KQwzXv8iydfIgLupbnZKLSQt5hh9o=

System-level cache configuration

When editing the /etc/nix/nix.conf as root, suffix the new substituter(s), space-separated to any values already populating the substituters parameter.

Next, similarly suffix the key(s) to the trusted-public-keys parameter.

Your file will likely look like the following:

…
substituters = https://cache.nixos.org/ https://cache.garnix.io https://shajra.cachix.org
trusted-public-keys = cache.nixos.org-1:6NCHdD59X431o0gWypbMrAURkbJ16ZPMQFGspcDShjY= cache.garnix.io:CTFPyKSLcx5RMJKfLo5EEPUObbA78b0YQ2DTCJXqr9g= shajra.cachix.org-1:V0x7Wjgd/mHGk2KQwzXv8iydfIgLupbnZKLSQt5hh9o=
…

User-level cache configuration

User-level Nix configuration overrides system-level settings. For user-level configuration, we can use the extra-substituters and extra-trusted-public-keys parameters to extend substituters and trusted-public-keys settings already in the system-level /etc/nix/nix.conf file. This way we don't need to worry about accidentally excluding the standard https://cache.nixos.org substituter where we get most of our cache hits.

For user-level Nix configuration, create a file at ~/.config/nix/nix.conf with the following content:

…
extra-substituters = https://cache.garnix.io https://shajra.cachix.org
extra-trusted-public-keys = cache.garnix.io:CTFPyKSLcx5RMJKfLo5EEPUObbA78b0YQ2DTCJXqr9g= shajra.cachix.org-1:V0x7Wjgd/mHGk2KQwzXv8iydfIgLupbnZKLSQt5hh9o=

Testing your configuration

You can see that your configuration is correct with the following commands:

nix show-config substituters
nix show-config trusted-public-keys

Make sure still have settings for https://cache.nixos.org.

Setting up experimental features

This project can take advantage of two experimental Nix features:

  • nix-command
  • flakes

The provided introduction to Nix covers in detail what these features are and can help you decide whether you want to enable them.

As you can guess, the flakes feature enables flakes functionality in Nix. The nix-command feature enables a variety of subcommands of Nix's newer nix command-line tool, some of which allow us to work with flakes.

If you don't enable experimental features globally, there is a switch to enable features local to just a single command-line invocation. For example, to use flakes-related commands, we call nix --extra-experimental-features 'nix-command flakes' …. When not configuring globally, setting an alias for this can be useful. The following command illustrates setting an alias in most POSIX-compliant shells:

alias nix-flakes = nix --extra-experimental-features 'nix-command flakes'

As discussed in the introduction, nix-command is enabled by default. You don't need to enable it explicitly (though you could disable it).

The easiest way to turn on experimental features is to put the following setting into either the system-level /etc/nix/nix.conf file or the user-level ~/.config/nix/nix.conf file:

experimental-features = nix-command flakes

Then you should see that the appropriate features are enabled:

nix show-config experimental-features