config_amwg_default_plots.yaml

#==============================
# config_amwg_default_plots.yaml

# This config file contains the standard set of variables and plots used for
# evaluating CAM simulations in the AMWG working group.

#Currently, if one is on NCAR's Casper or
#Cheyenne machine, then only the diagnostic output
#paths are needed, at least to perform a quick test
#run (these are indicated with "MUST EDIT" comments).
#Running these diagnostics on a different machine,
#or with a different, non-example simulation, will
#require additional modifications.
#
#Config file Keywords:
#--------------------
#
#1.  Using ${xxx} will substitute that text with the
#    variable referenced by xxx. For example:
#
#    cam_case_name: cool_run
#    cam_climo_loc: /some/where/${cam_case_name}
#
#    will set "cam_climo_loc" in the diagnostics package to:
#    /some/where/cool_run
#
#    Please note that currently this will only work if the
#    variable only exists in one location in the file.
#
#2.  Using ${<top_level_section>.xxx} will do the same as
#    keyword 1 above, but specifies which sub-section the
#    variable is coming from, which is necessary for variables
#    that are repeated in different subsections.  For example:
#
#    diag_basic_info:
#      cam_climo_loc:  /some/where/${diag_cam_climo.start_year}
#
#    diag_cam_climo:
#      start_year: 1850
#
#    will set "cam_climo_loc" in the diagnostics package to:
#    /some/where/1850
#
#Finally, please note that for both 1 and 2 the keywords must be lowercase.
#This is because future developments will hopefully use other keywords
#that are uppercase. Also please avoid using periods (".") in variable
#names, as this will likely cause issues with the current file parsing
#system.
#--------------------
#
##==============================
#
# This file doesn't (yet) read environment variables, so the user must
# set this themselves. It is also a good idea to search the doc for 'user'
# to see what default paths are being set for output/working files.
#
# Note that the string 'USER-NAME-NOT-SET' is used in the jupyter script
# to check for a failure to customize
#
user: 'USER-NAME-NOT-SET'


#This first set of variables specify basic info used by all diagnostic runs:
diag_basic_info:

    #History file string to match (eg. cam.h0 or ocn.pop.h.ecosys.nday1)
    # Only affects timeseries as everything else uses timeseries
    # Leave off trailing '.'
    #Default: cam.h0
    hist_str: cam.h0

    #Is this a model vs observations comparison?
    #If "false" or missing, then a model-model comparison is assumed:
    compare_obs: false

    #Generate HTML website (assumed false if missing):
    #Note:  The website files themselves will be located in the path
    #specified by "cam_diag_plot_loc", under the "<diag_run>/website" subdirectory,
    #where "<diag_run>" is the subdirectory created for this particular diagnostics run
    #(usually "case_vs_obs_XXX" or "case_vs_baseline_XXX").
    create_html: true

    #Location of observational datasets:
    #Note: this only matters if "compare_obs" is true and the path
    #isn't specified in the variable defaults file.
    obs_data_loc: /glade/work/nusbaume/SE_projects/model_diagnostics/ADF_obs

    #Location where re-gridded and interpolated CAM climatology files are stored:
    cam_regrid_loc: /glade/scratch/${user}/ADF/regrid

    #Overwrite CAM re-gridded files?
    #If false, or missing, then regridding will be skipped for regridded variables
    #that already exist in "cam_regrid_loc":
    cam_overwrite_regrid: false

    #Location where diagnostic plots are stored:
    cam_diag_plot_loc: /glade/scratch/${user}/ADF/plots

    #Location of ADF variable plotting defaults YAML file:
    #If left blank or missing, ADF/lib/adf_variable_defaults.yaml will be used
    #Uncomment and change path for custom variable defaults file
    #defaults_file: /some/path/to/defaults/file.yaml

    #Vertical pressure levels (in hPa) on which to plot 3-D variables
    #when using horizontal (e.g. lat/lon) map projections.
    #If this config option is missing, then no 3-D variables will be plotted on
    #horizontal maps.  Please note too that pressure levels must currently match
    #what is available in the observations file in order to be plotted in a
    #model vs obs run:
    plot_press_levels: [200,850]

    #Longitude line on which to center all lat/lon maps.
    #If this config option is missing then the central
    #longitude will default to 180 degrees E.
    central_longitude: 180

    #Number of processors on which to run the ADF.
    #If this config variable isn't present then
    #the ADF defaults to one processor.  Also, if
    #you set it to "*" then it will default
    #to all of the processors available on a
    #single node/machine:
    num_procs: 8

    #If set to true, then redo all plots even if they already exist.
    #If set to false, then if a plot is found it will be skipped:
    redo_plot: false


#This second set of variables provides info for the CAM simulation(s) being diagnosed:
diag_cam_climo:

    #Calculate climatologies?
    #If false, the climatology files will not be created:
    calc_cam_climo: true

    #Overwrite CAM climatology files?
    #If false, or not prsent, then already existing climatology files will be skipped:
    cam_overwrite_climo: false

    #Name of CAM case (or CAM run name):
    cam_case_name: b.e20.BHIST.f09_g17.20thC.297_05

    #Case nickname
    #NOTE: if nickname starts with '0' - nickname must be in quotes!
    # ie '026a' as opposed to 026a
    #If missing or left blank, will default to cam_case_name
    case_nickname: #cool nickname

    #Location of CAM history (h0) files:
    #Example test files
    cam_hist_loc: /glade/p/cesm/ADF/${diag_cam_climo.cam_case_name}

    #Location of CAM climatologies (to be created and then used by this script)
    cam_climo_loc: /glade/scratch/${user}/ADF/${diag_cam_climo.cam_case_name}/climo

    #model year when time series files should start:
    #Note:  Leaving this entry blank will make time series
    #       start at earliest available year.
    start_year: 1990

    #model year when time series files should end:
    #Note:  Leaving this entry blank will make time series
    #       end at latest available year.
    end_year: 1999

    #Do time series files exist?
    #If True, then diagnostics assumes that model files are already time series.
    #If False, or if simply not present, then diagnostics will attempt to create
    #time series files from history (time-slice) files:
    cam_ts_done: false

    #Save interim time series files?
    #WARNING:  This can take up a significant amount of space,
       #          but will save processing time the next time
    cam_ts_save: true

    #Overwrite time series files, if found?
    #If set to false, then time series creation will be skipped if files are found:
    cam_overwrite_ts: false

    #Location where time series files are (or will be) stored:
    cam_ts_loc: /glade/scratch/${user}/ADF/${diag_cam_climo.cam_case_name}/ts

    #----------------------

#This third set of variables provide info for the CAM baseline climatologies.
#This only matters if "compare_obs" is false:
diag_cam_baseline_climo:

    #Calculate cam baseline climatologies?
    #If false, the climatology files will not be created:
    calc_cam_climo: true

    #Overwrite CAM climatology files?
    #If false, or not present, then already existing climatology files will be skipped:
    cam_overwrite_climo: false

    #Name of CAM baseline case:
    cam_case_name: b.e20.BHIST.f09_g16.20thC.125.02

    #Baseline case nickname
    #NOTE: if nickname starts with '0' - nickname must be in quotes!
    # ie '026a' as opposed to 026a
    #If missing or left blank, will default to cam_case_name
    case_nickname: #cool nickname

    #Location of CAM baseline history (h0) files:
    #Example test files
    cam_hist_loc: /glade/p/cesm/ADF/${diag_cam_baseline_climo.cam_case_name}

    #Location of baseline CAM climatologies:
    cam_climo_loc: /glade/scratch/${user}/ADF/${diag_cam_baseline_climo.cam_case_name}/climo

    #model year when time series files should start:
    #Note:  Leaving this entry blank will make time series
    #       start at earliest available year.
    start_year: 1990

    #model year when time series files should end:
    #Note:  Leaving this entry blank will make time series
    #       end at latest available year.
    end_year: 1999

    #Do time series files need to be generated?
    #If True, then diagnostics assumes that model files are already time series.
    #If False, or if simply not present, then diagnostics will attempt to create
    #time series files from history (time-slice) files:
    cam_ts_done: false

    #Save interim time series files for baseline run?
    #WARNING:  This can take up a significant amount of space:
    cam_ts_save: true

    #Overwrite baseline time series files, if found?
    #If set to false, then time series creation will be skipped if files are found:
    cam_overwrite_ts: false

    #Location where time series files are (or will be) stored:
    cam_ts_loc: /glade/scratch/${user}/ADF/${diag_cam_baseline_climo.cam_case_name}/ts

#This fourth set of variables provides settings for calling the Climate Variability
# Diagnostics Package (CVDP). If cvdp_run is set to true the CVDP will be set up and
# run in background mode, likely completing after the ADF has completed.
# If CVDP is to be run PSL, TREFHT, TS and PRECT (or PRECC and PRECL) should be listed
# in the diag_var_list variable listing.
# For more CVDP information: https://www.cesm.ucar.edu/working_groups/CVC/cvdp/
diag_cvdp_info:

    # Run the CVDP on the listed run(s)?
    cvdp_run: false

    # CVDP code path, sets the location of the CVDP codebase
    #  CGD systems path = /home/asphilli/CESM-diagnostics/CVDP/Release/v5.2.0/
    #  CISL systems path = /glade/u/home/asphilli/CESM-diagnostics/CVDP/Release/v5.2.0/
    #  github location = https://github.com/NCAR/CVDP-ncl
    cvdp_codebase_loc: /glade/u/home/asphilli/CESM-diagnostics/CVDP/Release/v5.2.0/

    # Location where cvdp codebase will be copied to and diagnostic plots will be stored
    cvdp_loc: /glade/scratch/asphilli/ADF-Sandbox/cvdp/      #MUST EDIT!

    # tar up CVDP results?
    cvdp_tar: false


#+++++++++++++++++++++++++++++++++++++++++++++++++++
#These variables below only matter if you are using
#a non-standard method, or are adding your own
#diagnostic scripts.
#+++++++++++++++++++++++++++++++++++++++++++++++++++

#Note:  If you want to pass arguments to a particular script, you can
#do it like so (using the "averaging_example" script in this case):
# - {create_climo_files: {kwargs: {clobber: true}}}

#Name of time-averaging scripts being used to generate climatologies.
#These scripts must be located in "scripts/averaging":
time_averaging_scripts:
    - create_climo_files
    #- create_TEM_files #To generate TEM files, please un-comment

#Name of regridding scripts being used.
#These scripts must be located in "scripts/regridding":
regridding_scripts:
    - regrid_and_vert_interp

#List of analysis scripts being used.
#These scripts must be located in "scripts/analysis":
analysis_scripts:
    - amwg_table

#List of plotting scripts being used.
#These scripts must be located in "scripts/plotting":
plotting_scripts:
    - global_latlon_map
    - global_latlon_vect_map
    - zonal_mean
    - polar_map
    - cam_taylor_diagram
    - ozone_diagnostics
    #- tape_recorder
    #- tem #To plot TEM, please un-comment fill-out
                              #the "tem_info" section below
    #- regional_map_multicase #To use this please un-comment and fill-out
                              #the "region_multicase" section below

#List of CAM variables that will be processesd:
#If CVDP is to be run PSL, TREFHT, TS and PRECT (or PRECC and PRECL) should be listed
diag_var_list:
   - AODDUST
   - AODVIS
   - CLDHGH
   - CLDICE
   - CLDLIQ
   - CLDLOW
   - CLDMED
   - CLDTOT
   - CLOUD
   - FLNS
   - FLNT
   - FLNTC
   - FSNS
   - FSNT
   - FSNTC
   - LHFLX
   - LWCF
   - OMEGA500
   - PBLH
   - PRECT
   - PS
   - PSL
   - QFLX
   - RELHUM
   - SHFLX
   - SST
   - SWCF
   - T
   - TAUX
   - TAUY
   - TGCLDIWP
   - TGCLDLWP
   - TMQ
   - TREFHT
   - TS
   - U
   - U10
   - ICEFRAC
   - OCNFRAC
   - LANDFRAC
   - O3

#<Add more variables here.>

# Options for multi-case regional contour plots (./plotting/regional_map_multicase.py)
# region_multicase:
#     region_spec: [slat, nlat, wlon, elon]
#     region_time_option: <calendar | zeroanchor>  # If calendar, will look for specified years. If zeroanchor will use a nyears starting from year_offset from the beginning of timeseries
#     region_start_year:
#     region_end_year:
#     region_nyear:
#     region_year_offset:
#     region_month: <NULL means look for season>
#     region_season: <NULL means use annual mean>
#     region_variables: <list of variables to try to use; allows for a subset of the total diag variables>

# Options for TEM diagnostics (./averaging/create_TEM_files.py and ./plotting/temp.py)
#tem_info:
    #Location where TEM files are stored:
    #If path not specified or commented out, TEM calculation/plots will be skipped
#    tem_loc: /glade/scratch/richling/adf-output/ADF-data/TEM/

    #TEM history file number
    #If missing or blank, ADF will default to h4
#    hist_num: h4

    #Overwrite TEM files, if found?
    #If set to false, then TEM creation will be skipped if files are found:
#    overwrite_tem_case: false

    #For multi-case
    #overwrite_tem_case:
    #    - false
    #    - true

#    overwrite_tem_base: false

#END OF FILE