Support cargo-release #346
eldruinAnnotations
67 warnings
|
casting to the same type is unnecessary (`u16` -> `u16`):
src/ltdc.rs#L174
warning: casting to the same type is unnecessary (`u16` -> `u16`)
--> src/ltdc.rs:174:23
|
174 | .bits(total_height as u16)
| ^^^^^^^^^^^^^^^^^^^ help: try: `total_height`
|
= help: for further information visit https://rust-lang.github.io/rust-clippy/master/index.html#unnecessary_cast
|
|
casting to the same type is unnecessary (`u16` -> `u16`):
src/ltdc.rs#L172
warning: casting to the same type is unnecessary (`u16` -> `u16`)
--> src/ltdc.rs:172:23
|
172 | .bits(total_width as u16)
| ^^^^^^^^^^^^^^^^^^ help: try: `total_width`
|
= help: for further information visit https://rust-lang.github.io/rust-clippy/master/index.html#unnecessary_cast
|
|
casting to the same type is unnecessary (`u16` -> `u16`):
src/ltdc.rs#L168
warning: casting to the same type is unnecessary (`u16` -> `u16`)
--> src/ltdc.rs:168:23
|
168 | .bits((config.v_sync + config.v_back_porch + config.active_height - 1) as u16)
| ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^ help: try: `(config.v_sync + config.v_back_porch + config.active_height - 1)`
|
= help: for further information visit https://rust-lang.github.io/rust-clippy/master/index.html#unnecessary_cast
|
|
casting to the same type is unnecessary (`u16` -> `u16`):
src/ltdc.rs#L166
warning: casting to the same type is unnecessary (`u16` -> `u16`)
--> src/ltdc.rs:166:23
|
166 | .bits((config.h_sync + config.h_back_porch + config.active_width - 1) as u16)
| ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^ help: try: `(config.h_sync + config.h_back_porch + config.active_width - 1)`
|
= help: for further information visit https://rust-lang.github.io/rust-clippy/master/index.html#unnecessary_cast
|
|
casting to the same type is unnecessary (`u16` -> `u16`):
src/ltdc.rs#L162
warning: casting to the same type is unnecessary (`u16` -> `u16`)
--> src/ltdc.rs:162:23
|
162 | .bits((config.v_sync + config.v_back_porch - 1) as u16)
| ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^ help: try: `(config.v_sync + config.v_back_porch - 1)`
|
= help: for further information visit https://rust-lang.github.io/rust-clippy/master/index.html#unnecessary_cast
|
|
casting to the same type is unnecessary (`u16` -> `u16`):
src/ltdc.rs#L160
warning: casting to the same type is unnecessary (`u16` -> `u16`)
--> src/ltdc.rs:160:23
|
160 | .bits((config.h_sync + config.h_back_porch - 1) as u16)
| ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^ help: try: `(config.h_sync + config.h_back_porch - 1)`
|
= help: for further information visit https://rust-lang.github.io/rust-clippy/master/index.html#unnecessary_cast
|
|
casting to the same type is unnecessary (`u16` -> `u16`):
src/ltdc.rs#L156
warning: casting to the same type is unnecessary (`u16` -> `u16`)
--> src/ltdc.rs:156:23
|
156 | .bits((config.v_sync - 1) as u16)
| ^^^^^^^^^^^^^^^^^^^^^^^^^^ help: try: `(config.v_sync - 1)`
|
= help: for further information visit https://rust-lang.github.io/rust-clippy/master/index.html#unnecessary_cast
|
|
casting to the same type is unnecessary (`u16` -> `u16`):
src/ltdc.rs#L154
warning: casting to the same type is unnecessary (`u16` -> `u16`)
--> src/ltdc.rs:154:23
|
154 | .bits((config.h_sync - 1) as u16)
| ^^^^^^^^^^^^^^^^^^^^^^^^^^ help: try: `(config.h_sync - 1)`
|
= help: for further information visit https://rust-lang.github.io/rust-clippy/master/index.html#unnecessary_cast
|
|
unneeded late initialization:
src/ltdc.rs#L86
warning: unneeded late initialization
--> src/ltdc.rs:86:9
|
86 | let base_clk: u32;
| ^^^^^^^^^^^^^^^^^^
|
= help: for further information visit https://rust-lang.github.io/rust-clippy/master/index.html#needless_late_init
= note: `#[warn(clippy::needless_late_init)]` on by default
help: move the declaration `base_clk` here and remove the assignments from the `match` arms
|
86 ~
87 ~ let base_clk: u32 = match &hse {
88 ~ Some(hse) => hse.freq.raw(),
89 | // If no HSE is provided, we use the HSI clock at 16 MHz
90 ~ None => 16_000_000,
91 ~ };
|
|
|
casting to the same type is unnecessary (`u8` -> `u8`):
src/i2c.rs#L317
warning: casting to the same type is unnecessary (`u8` -> `u8`)
--> src/i2c.rs:317:25
|
317 | presc = tmp_presc as u8;
| ^^^^^^^^^^^^^^^ help: try: `tmp_presc`
|
= help: for further information visit https://rust-lang.github.io/rust-clippy/master/index.html#unnecessary_cast
|
|
doc list item missing indentation:
src/timer/pwm_input.rs#L94
warning: doc list item missing indentation
--> src/timer/pwm_input.rs:94:17
|
94 | /// See the pwm input example for an suitable interrupt handler.
| ^
...
268 | / hal! {
269 | | TIM1,
270 | | TIM5,
271 | | TIM9,
272 | | }
| |_- in this macro invocation
|
= help: if this is supposed to be its own paragraph, add a blank line
= help: for further information visit https://rust-lang.github.io/rust-clippy/master/index.html#doc_lazy_continuation
= note: this warning originates in the macro `hal` (in Nightly builds, run with -Z macro-backtrace for more info)
help: indent this line
|
94 | /// See the pwm input example for an suitable interrupt handler.
| +++
|
|
doc list item missing indentation:
src/timer/pwm_input.rs#L15
warning: doc list item missing indentation
--> src/timer/pwm_input.rs:15:5
|
15 | /// An example interrupt handler is provided:
| ^
|
= help: if this is supposed to be its own paragraph, add a blank line
= help: for further information visit https://rust-lang.github.io/rust-clippy/master/index.html#doc_lazy_continuation
help: indent this line
|
15 | /// An example interrupt handler is provided:
| +++
|
|
casting to the same type is unnecessary (`u32` -> `u32`):
src/rcc.rs#L869
warning: casting to the same type is unnecessary (`u32` -> `u32`)
--> src/rcc.rs:869:65
|
869 | let one_over_m = ((1 << Self::FIXED_POINT_LSHIFT) / (m as u32) + 1) >> 1;
| ^^^^^^^^^^ help: try: `m`
|
= help: for further information visit https://rust-lang.github.io/rust-clippy/master/index.html#unnecessary_cast
|
|
casting to the same type is unnecessary (`u64` -> `u64`):
src/rcc.rs#L669
warning: casting to the same type is unnecessary (`u64` -> `u64`)
--> src/rcc.rs:669:36
|
669 | ... (((base_clk as u64 * self.pllsain as u64 * one_over_m as u64)
| ^^^^^^^^^^^^^^^ help: try: `base_clk`
|
= help: for further information visit https://rust-lang.github.io/rust-clippy/master/index.html#unnecessary_cast
|
|
casting to the same type is unnecessary (`u64` -> `u64`):
src/rcc.rs#L645
warning: casting to the same type is unnecessary (`u64` -> `u64`)
--> src/rcc.rs:645:43
|
645 | let pll48clk = (((base_clk as u64 * self.plln as u64 * one_over_m as u64)
| ^^^^^^^^^^^^^^^ help: try: `base_clk`
|
= help: for further information visit https://rust-lang.github.io/rust-clippy/master/index.html#unnecessary_cast
|
|
casting to the same type is unnecessary (`u64` -> `u64`):
src/rcc.rs#L629
warning: casting to the same type is unnecessary (`u64` -> `u64`)
--> src/rcc.rs:629:25
|
629 | sysclk = (((base_clk as u64 * self.plln as u64 * one_over_m as u64)
| ^^^^^^^^^^^^^^^ help: try: `base_clk`
|
= help: for further information visit https://rust-lang.github.io/rust-clippy/master/index.html#unnecessary_cast
= note: `#[warn(clippy::unnecessary_cast)]` on by default
|
|
doc list item missing indentation:
src/gpio.rs#L37
warning: doc list item missing indentation
--> src/gpio.rs:37:5
|
37 | //! mode. Can be used as an input in the `open` configuration
| ^^^^
|
= help: if this is supposed to be its own paragraph, add a blank line
= help: for further information visit https://rust-lang.github.io/rust-clippy/master/index.html#doc_lazy_continuation
help: indent this line
|
37 | //! mode. Can be used as an input in the `open` configuration
| ++
|
|
doc list item missing indentation:
src/gpio.rs#L32
warning: doc list item missing indentation
--> src/gpio.rs:32:5
|
32 | //! is connected
| ^^^^
|
= help: if this is supposed to be its own paragraph, add a blank line
= help: for further information visit https://rust-lang.github.io/rust-clippy/master/index.html#doc_lazy_continuation
help: indent this line
|
32 | //! is connected
| ++
|
|
doc list item missing indentation:
src/gpio.rs#L30
warning: doc list item missing indentation
--> src/gpio.rs:30:5
|
30 | //! is connected
| ^^^^
|
= help: if this is supposed to be its own paragraph, add a blank line
= help: for further information visit https://rust-lang.github.io/rust-clippy/master/index.html#doc_lazy_continuation
= note: `#[warn(clippy::doc_lazy_continuation)]` on by default
help: indent this line
|
30 | //! is connected
| ++
|
|
this `impl` can be derived:
src/dma.rs#L640
warning: this `impl` can be derived
--> src/dma.rs:640:1
|
640 | / impl Default for Interrupts {
641 | | fn default() -> Self {
642 | | Self {
643 | | transfer_complete: false,
... |
648 | | }
649 | | }
| |_^
|
= help: for further information visit https://rust-lang.github.io/rust-clippy/master/index.html#derivable_impls
= note: `#[warn(clippy::derivable_impls)]` on by default
= help: remove the manual implementation...
help: ...and instead derive it
|
633 + #[derive(Default)]
634 | pub struct Interrupts {
|
|
|
the following explicit lifetimes could be elided: 'r:
src/dma.rs#L588
warning: the following explicit lifetimes could be elided: 'r
--> src/dma.rs:588:27
|
588 | fn select<'r>(w: &'r mut dma2::st::cr::W)
| ^^ ^^
589 | -> &'r mut dma2::st::cr::W
| ^^
...
600 | / impl_channel!(
601 | | Channel0, 0;
602 | | Channel1, 1;
603 | | Channel2, 2;
... |
608 | | Channel7, 7;
609 | | );
| |_- in this macro invocation
|
= help: for further information visit https://rust-lang.github.io/rust-clippy/master/index.html#needless_lifetimes
= note: `#[warn(clippy::needless_lifetimes)]` on by default
= note: this warning originates in the macro `impl_channel` (in Nightly builds, run with -Z macro-backtrace for more info)
help: elide the lifetimes
|
588 ~ fn select(w: &mut dma2::st::cr::W)
589 ~ -> &mut dma2::st::cr::W
|
|
|
usage of a legacy numeric method:
src/dma.rs#L119
warning: usage of a legacy numeric method
--> src/dma.rs:119:38
|
119 | assert!(buffer.len() <= u16::max_value() as usize);
| ^^^^^^^^^^^
|
= help: for further information visit https://rust-lang.github.io/rust-clippy/master/index.html#legacy_numeric_constants
= note: `#[warn(clippy::legacy_numeric_constants)]` on by default
help: use the associated constant instead
|
119 | assert!(buffer.len() <= u16::MAX as usize);
| ~~~
|
|
unnecessary `unsafe` block:
src/timer.rs#L535
warning: unnecessary `unsafe` block
--> src/timer.rs:535:31
|
535 | ccr.write(|w| unsafe { w.bits(value) })
| ^^^^^^ unnecessary `unsafe` block
...
729 | / hal! {
730 | | pac::TIM2: [Timer2, u32, c: (CH4), m: tim2,],
731 | | pac::TIM3: [Timer3, u16, c: (CH4), m: tim3,],
732 | | pac::TIM4: [Timer4, u16, c: (CH4), m: tim3,],
... |
744 | | pac::TIM11: [Timer11, u16, c: (CH1),],
745 | | }
| |_- in this macro invocation
|
= note: this warning originates in the macro `with_pwm` which comes from the expansion of the macro `hal` (in Nightly builds, run with -Z macro-backtrace for more info)
|
|
unnecessary `unsafe` block:
src/timer.rs#L535
warning: unnecessary `unsafe` block
--> src/timer.rs:535:31
|
535 | ccr.write(|w| unsafe { w.bits(value) })
| ^^^^^^ unnecessary `unsafe` block
...
729 | / hal! {
730 | | pac::TIM2: [Timer2, u32, c: (CH4), m: tim2,],
731 | | pac::TIM3: [Timer3, u16, c: (CH4), m: tim3,],
732 | | pac::TIM4: [Timer4, u16, c: (CH4), m: tim3,],
... |
744 | | pac::TIM11: [Timer11, u16, c: (CH1),],
745 | | }
| |_- in this macro invocation
|
= note: `#[warn(unused_unsafe)]` on by default
= note: this warning originates in the macro `with_pwm` which comes from the expansion of the macro `hal` (in Nightly builds, run with -Z macro-backtrace for more info)
|
|
unexpected `cfg` condition value: `stm32f410`:
src/timer/pwm_input.rs#L267
warning: unexpected `cfg` condition value: `stm32f410`
--> src/timer/pwm_input.rs:267:11
|
267 | #[cfg(not(feature = "stm32f410"))]
| ^^^^^^^^^^-----------
| |
| help: there is a expected value with a similar name: `"stm32f730"`
|
= note: expected values for `feature` are: `device-selected`, `display-interface`, `fmc`, `fmc_lcd`, `gpioj`, `gpiok`, `has-can`, `ltdc`, `rt`, `rtic`, `rtic-monotonic`, `stm32-fmc`, `stm32f722`, `stm32f723`, `stm32f730`, `stm32f730-lpc`, `stm32f732`, `stm32f733`, `stm32f745`, `stm32f746`, `stm32f756`, `stm32f765`, `stm32f767`, `stm32f769`, `stm32f777`, `stm32f778`, `stm32f779`, `svd-f730`, `svd-f745`, `svd-f765`, `svd-f7x2`, `svd-f7x3`, `svd-f7x6`, `svd-f7x7`, and `svd-f7x9` and 4 more
= help: consider adding `stm32f410` as a feature in `Cargo.toml`
= note: see <https://doc.rust-lang.org/nightly/rustc/check-cfg/cargo-specifics.html> for more information about checking conditional configuration
|
|
unexpected `cfg` condition value: `stm32f479`:
src/timer/pwm_input.rs#L255
warning: unexpected `cfg` condition value: `stm32f479`
--> src/timer/pwm_input.rs:255:5
|
255 | feature = "stm32f479",
| ^^^^^^^^^^-----------
| |
| help: there is a expected value with a similar name: `"stm32f779"`
|
= note: expected values for `feature` are: `device-selected`, `display-interface`, `fmc`, `fmc_lcd`, `gpioj`, `gpiok`, `has-can`, `ltdc`, `rt`, `rtic`, `rtic-monotonic`, `stm32-fmc`, `stm32f722`, `stm32f723`, `stm32f730`, `stm32f730-lpc`, `stm32f732`, `stm32f733`, `stm32f745`, `stm32f746`, `stm32f756`, `stm32f765`, `stm32f767`, `stm32f769`, `stm32f777`, `stm32f778`, `stm32f779`, `svd-f730`, `svd-f745`, `svd-f765`, `svd-f7x2`, `svd-f7x3`, `svd-f7x6`, `svd-f7x7`, and `svd-f7x9` and 4 more
= help: consider adding `stm32f479` as a feature in `Cargo.toml`
= note: see <https://doc.rust-lang.org/nightly/rustc/check-cfg/cargo-specifics.html> for more information about checking conditional configuration
|
|
unexpected `cfg` condition value: `stm32f469`:
src/timer/pwm_input.rs#L254
warning: unexpected `cfg` condition value: `stm32f469`
--> src/timer/pwm_input.rs:254:5
|
254 | feature = "stm32f469",
| ^^^^^^^^^^-----------
| |
| help: there is a expected value with a similar name: `"stm32f769"`
|
= note: expected values for `feature` are: `device-selected`, `display-interface`, `fmc`, `fmc_lcd`, `gpioj`, `gpiok`, `has-can`, `ltdc`, `rt`, `rtic`, `rtic-monotonic`, `stm32-fmc`, `stm32f722`, `stm32f723`, `stm32f730`, `stm32f730-lpc`, `stm32f732`, `stm32f733`, `stm32f745`, `stm32f746`, `stm32f756`, `stm32f765`, `stm32f767`, `stm32f769`, `stm32f777`, `stm32f778`, `stm32f779`, `svd-f730`, `svd-f745`, `svd-f765`, `svd-f7x2`, `svd-f7x3`, `svd-f7x6`, `svd-f7x7`, and `svd-f7x9` and 4 more
= help: consider adding `stm32f469` as a feature in `Cargo.toml`
= note: see <https://doc.rust-lang.org/nightly/rustc/check-cfg/cargo-specifics.html> for more information about checking conditional configuration
|
|
unexpected `cfg` condition value: `stm32f446`:
src/timer/pwm_input.rs#L253
warning: unexpected `cfg` condition value: `stm32f446`
--> src/timer/pwm_input.rs:253:5
|
253 | feature = "stm32f446",
| ^^^^^^^^^^-----------
| |
| help: there is a expected value with a similar name: `"stm32f746"`
|
= note: expected values for `feature` are: `device-selected`, `display-interface`, `fmc`, `fmc_lcd`, `gpioj`, `gpiok`, `has-can`, `ltdc`, `rt`, `rtic`, `rtic-monotonic`, `stm32-fmc`, `stm32f722`, `stm32f723`, `stm32f730`, `stm32f730-lpc`, `stm32f732`, `stm32f733`, `stm32f745`, `stm32f746`, `stm32f756`, `stm32f765`, `stm32f767`, `stm32f769`, `stm32f777`, `stm32f778`, `stm32f779`, `svd-f730`, `svd-f745`, `svd-f765`, `svd-f7x2`, `svd-f7x3`, `svd-f7x6`, `svd-f7x7`, and `svd-f7x9` and 4 more
= help: consider adding `stm32f446` as a feature in `Cargo.toml`
= note: see <https://doc.rust-lang.org/nightly/rustc/check-cfg/cargo-specifics.html> for more information about checking conditional configuration
|
|
unexpected `cfg` condition value: `stm32f439`:
src/timer/pwm_input.rs#L252
warning: unexpected `cfg` condition value: `stm32f439`
--> src/timer/pwm_input.rs:252:5
|
252 | feature = "stm32f439",
| ^^^^^^^^^^-----------
| |
| help: there is a expected value with a similar name: `"stm32f769"`
|
= note: expected values for `feature` are: `device-selected`, `display-interface`, `fmc`, `fmc_lcd`, `gpioj`, `gpiok`, `has-can`, `ltdc`, `rt`, `rtic`, `rtic-monotonic`, `stm32-fmc`, `stm32f722`, `stm32f723`, `stm32f730`, `stm32f730-lpc`, `stm32f732`, `stm32f733`, `stm32f745`, `stm32f746`, `stm32f756`, `stm32f765`, `stm32f767`, `stm32f769`, `stm32f777`, `stm32f778`, `stm32f779`, `svd-f730`, `svd-f745`, `svd-f765`, `svd-f7x2`, `svd-f7x3`, `svd-f7x6`, `svd-f7x7`, and `svd-f7x9` and 4 more
= help: consider adding `stm32f439` as a feature in `Cargo.toml`
= note: see <https://doc.rust-lang.org/nightly/rustc/check-cfg/cargo-specifics.html> for more information about checking conditional configuration
|
|
unexpected `cfg` condition value: `stm32f437`:
src/timer/pwm_input.rs#L251
warning: unexpected `cfg` condition value: `stm32f437`
--> src/timer/pwm_input.rs:251:5
|
251 | feature = "stm32f437",
| ^^^^^^^^^^-----------
| |
| help: there is a expected value with a similar name: `"stm32f777"`
|
= note: expected values for `feature` are: `device-selected`, `display-interface`, `fmc`, `fmc_lcd`, `gpioj`, `gpiok`, `has-can`, `ltdc`, `rt`, `rtic`, `rtic-monotonic`, `stm32-fmc`, `stm32f722`, `stm32f723`, `stm32f730`, `stm32f730-lpc`, `stm32f732`, `stm32f733`, `stm32f745`, `stm32f746`, `stm32f756`, `stm32f765`, `stm32f767`, `stm32f769`, `stm32f777`, `stm32f778`, `stm32f779`, `svd-f730`, `svd-f745`, `svd-f765`, `svd-f7x2`, `svd-f7x3`, `svd-f7x6`, `svd-f7x7`, and `svd-f7x9` and 4 more
= help: consider adding `stm32f437` as a feature in `Cargo.toml`
= note: see <https://doc.rust-lang.org/nightly/rustc/check-cfg/cargo-specifics.html> for more information about checking conditional configuration
|
|
unexpected `cfg` condition value: `stm32f429`:
src/timer/pwm_input.rs#L250
warning: unexpected `cfg` condition value: `stm32f429`
--> src/timer/pwm_input.rs:250:5
|
250 | feature = "stm32f429",
| ^^^^^^^^^^-----------
| |
| help: there is a expected value with a similar name: `"stm32f769"`
|
= note: expected values for `feature` are: `device-selected`, `display-interface`, `fmc`, `fmc_lcd`, `gpioj`, `gpiok`, `has-can`, `ltdc`, `rt`, `rtic`, `rtic-monotonic`, `stm32-fmc`, `stm32f722`, `stm32f723`, `stm32f730`, `stm32f730-lpc`, `stm32f732`, `stm32f733`, `stm32f745`, `stm32f746`, `stm32f756`, `stm32f765`, `stm32f767`, `stm32f769`, `stm32f777`, `stm32f778`, `stm32f779`, `svd-f730`, `svd-f745`, `svd-f765`, `svd-f7x2`, `svd-f7x3`, `svd-f7x6`, `svd-f7x7`, and `svd-f7x9` and 4 more
= help: consider adding `stm32f429` as a feature in `Cargo.toml`
= note: see <https://doc.rust-lang.org/nightly/rustc/check-cfg/cargo-specifics.html> for more information about checking conditional configuration
|
|
unexpected `cfg` condition value: `stm32f427`:
src/timer/pwm_input.rs#L249
warning: unexpected `cfg` condition value: `stm32f427`
--> src/timer/pwm_input.rs:249:5
|
249 | feature = "stm32f427",
| ^^^^^^^^^^-----------
| |
| help: there is a expected value with a similar name: `"stm32f777"`
|
= note: expected values for `feature` are: `device-selected`, `display-interface`, `fmc`, `fmc_lcd`, `gpioj`, `gpiok`, `has-can`, `ltdc`, `rt`, `rtic`, `rtic-monotonic`, `stm32-fmc`, `stm32f722`, `stm32f723`, `stm32f730`, `stm32f730-lpc`, `stm32f732`, `stm32f733`, `stm32f745`, `stm32f746`, `stm32f756`, `stm32f765`, `stm32f767`, `stm32f769`, `stm32f777`, `stm32f778`, `stm32f779`, `svd-f730`, `svd-f745`, `svd-f765`, `svd-f7x2`, `svd-f7x3`, `svd-f7x6`, `svd-f7x7`, and `svd-f7x9` and 4 more
= help: consider adding `stm32f427` as a feature in `Cargo.toml`
= note: see <https://doc.rust-lang.org/nightly/rustc/check-cfg/cargo-specifics.html> for more information about checking conditional configuration
|
|
unexpected `cfg` condition value: `stm32f423`:
src/timer/pwm_input.rs#L248
warning: unexpected `cfg` condition value: `stm32f423`
--> src/timer/pwm_input.rs:248:5
|
248 | feature = "stm32f423",
| ^^^^^^^^^^-----------
| |
| help: there is a expected value with a similar name: `"stm32f723"`
|
= note: expected values for `feature` are: `device-selected`, `display-interface`, `fmc`, `fmc_lcd`, `gpioj`, `gpiok`, `has-can`, `ltdc`, `rt`, `rtic`, `rtic-monotonic`, `stm32-fmc`, `stm32f722`, `stm32f723`, `stm32f730`, `stm32f730-lpc`, `stm32f732`, `stm32f733`, `stm32f745`, `stm32f746`, `stm32f756`, `stm32f765`, `stm32f767`, `stm32f769`, `stm32f777`, `stm32f778`, `stm32f779`, `svd-f730`, `svd-f745`, `svd-f765`, `svd-f7x2`, `svd-f7x3`, `svd-f7x6`, `svd-f7x7`, and `svd-f7x9` and 4 more
= help: consider adding `stm32f423` as a feature in `Cargo.toml`
= note: see <https://doc.rust-lang.org/nightly/rustc/check-cfg/cargo-specifics.html> for more information about checking conditional configuration
|
|
unexpected `cfg` condition value: `stm32f417`:
src/timer/pwm_input.rs#L247
warning: unexpected `cfg` condition value: `stm32f417`
--> src/timer/pwm_input.rs:247:5
|
247 | feature = "stm32f417",
| ^^^^^^^^^^-----------
| |
| help: there is a expected value with a similar name: `"stm32f777"`
|
= note: expected values for `feature` are: `device-selected`, `display-interface`, `fmc`, `fmc_lcd`, `gpioj`, `gpiok`, `has-can`, `ltdc`, `rt`, `rtic`, `rtic-monotonic`, `stm32-fmc`, `stm32f722`, `stm32f723`, `stm32f730`, `stm32f730-lpc`, `stm32f732`, `stm32f733`, `stm32f745`, `stm32f746`, `stm32f756`, `stm32f765`, `stm32f767`, `stm32f769`, `stm32f777`, `stm32f778`, `stm32f779`, `svd-f730`, `svd-f745`, `svd-f765`, `svd-f7x2`, `svd-f7x3`, `svd-f7x6`, `svd-f7x7`, and `svd-f7x9` and 4 more
= help: consider adding `stm32f417` as a feature in `Cargo.toml`
= note: see <https://doc.rust-lang.org/nightly/rustc/check-cfg/cargo-specifics.html> for more information about checking conditional configuration
|
|
unexpected `cfg` condition value: `stm32f415`:
src/timer/pwm_input.rs#L246
warning: unexpected `cfg` condition value: `stm32f415`
--> src/timer/pwm_input.rs:246:5
|
246 | feature = "stm32f415",
| ^^^^^^^^^^-----------
| |
| help: there is a expected value with a similar name: `"stm32f765"`
|
= note: expected values for `feature` are: `device-selected`, `display-interface`, `fmc`, `fmc_lcd`, `gpioj`, `gpiok`, `has-can`, `ltdc`, `rt`, `rtic`, `rtic-monotonic`, `stm32-fmc`, `stm32f722`, `stm32f723`, `stm32f730`, `stm32f730-lpc`, `stm32f732`, `stm32f733`, `stm32f745`, `stm32f746`, `stm32f756`, `stm32f765`, `stm32f767`, `stm32f769`, `stm32f777`, `stm32f778`, `stm32f779`, `svd-f730`, `svd-f745`, `svd-f765`, `svd-f7x2`, `svd-f7x3`, `svd-f7x6`, `svd-f7x7`, and `svd-f7x9` and 4 more
= help: consider adding `stm32f415` as a feature in `Cargo.toml`
= note: see <https://doc.rust-lang.org/nightly/rustc/check-cfg/cargo-specifics.html> for more information about checking conditional configuration
|
|
unexpected `cfg` condition value: `stm32f413`:
src/timer/pwm_input.rs#L245
warning: unexpected `cfg` condition value: `stm32f413`
--> src/timer/pwm_input.rs:245:5
|
245 | feature = "stm32f413",
| ^^^^^^^^^^-----------
| |
| help: there is a expected value with a similar name: `"stm32f733"`
|
= note: expected values for `feature` are: `device-selected`, `display-interface`, `fmc`, `fmc_lcd`, `gpioj`, `gpiok`, `has-can`, `ltdc`, `rt`, `rtic`, `rtic-monotonic`, `stm32-fmc`, `stm32f722`, `stm32f723`, `stm32f730`, `stm32f730-lpc`, `stm32f732`, `stm32f733`, `stm32f745`, `stm32f746`, `stm32f756`, `stm32f765`, `stm32f767`, `stm32f769`, `stm32f777`, `stm32f778`, `stm32f779`, `svd-f730`, `svd-f745`, `svd-f765`, `svd-f7x2`, `svd-f7x3`, `svd-f7x6`, `svd-f7x7`, and `svd-f7x9` and 4 more
= help: consider adding `stm32f413` as a feature in `Cargo.toml`
= note: see <https://doc.rust-lang.org/nightly/rustc/check-cfg/cargo-specifics.html> for more information about checking conditional configuration
|
|
unexpected `cfg` condition value: `stm32f412`:
src/timer/pwm_input.rs#L244
warning: unexpected `cfg` condition value: `stm32f412`
--> src/timer/pwm_input.rs:244:5
|
244 | feature = "stm32f412",
| ^^^^^^^^^^-----------
| |
| help: there is a expected value with a similar name: `"stm32f722"`
|
= note: expected values for `feature` are: `device-selected`, `display-interface`, `fmc`, `fmc_lcd`, `gpioj`, `gpiok`, `has-can`, `ltdc`, `rt`, `rtic`, `rtic-monotonic`, `stm32-fmc`, `stm32f722`, `stm32f723`, `stm32f730`, `stm32f730-lpc`, `stm32f732`, `stm32f733`, `stm32f745`, `stm32f746`, `stm32f756`, `stm32f765`, `stm32f767`, `stm32f769`, `stm32f777`, `stm32f778`, `stm32f779`, `svd-f730`, `svd-f745`, `svd-f765`, `svd-f7x2`, `svd-f7x3`, `svd-f7x6`, `svd-f7x7`, and `svd-f7x9` and 4 more
= help: consider adding `stm32f412` as a feature in `Cargo.toml`
= note: see <https://doc.rust-lang.org/nightly/rustc/check-cfg/cargo-specifics.html> for more information about checking conditional configuration
|
|
unexpected `cfg` condition value: `stm32f407`:
src/timer/pwm_input.rs#L243
warning: unexpected `cfg` condition value: `stm32f407`
--> src/timer/pwm_input.rs:243:5
|
243 | feature = "stm32f407",
| ^^^^^^^^^^-----------
| |
| help: there is a expected value with a similar name: `"stm32f777"`
|
= note: expected values for `feature` are: `device-selected`, `display-interface`, `fmc`, `fmc_lcd`, `gpioj`, `gpiok`, `has-can`, `ltdc`, `rt`, `rtic`, `rtic-monotonic`, `stm32-fmc`, `stm32f722`, `stm32f723`, `stm32f730`, `stm32f730-lpc`, `stm32f732`, `stm32f733`, `stm32f745`, `stm32f746`, `stm32f756`, `stm32f765`, `stm32f767`, `stm32f769`, `stm32f777`, `stm32f778`, `stm32f779`, `svd-f730`, `svd-f745`, `svd-f765`, `svd-f7x2`, `svd-f7x3`, `svd-f7x6`, `svd-f7x7`, and `svd-f7x9` and 4 more
= help: consider adding `stm32f407` as a feature in `Cargo.toml`
= note: see <https://doc.rust-lang.org/nightly/rustc/check-cfg/cargo-specifics.html> for more information about checking conditional configuration
|
|
unexpected `cfg` condition value: `stm32f405`:
src/timer/pwm_input.rs#L242
warning: unexpected `cfg` condition value: `stm32f405`
--> src/timer/pwm_input.rs:242:5
|
242 | feature = "stm32f405",
| ^^^^^^^^^^-----------
| |
| help: there is a expected value with a similar name: `"stm32f765"`
|
= note: expected values for `feature` are: `device-selected`, `display-interface`, `fmc`, `fmc_lcd`, `gpioj`, `gpiok`, `has-can`, `ltdc`, `rt`, `rtic`, `rtic-monotonic`, `stm32-fmc`, `stm32f722`, `stm32f723`, `stm32f730`, `stm32f730-lpc`, `stm32f732`, `stm32f733`, `stm32f745`, `stm32f746`, `stm32f756`, `stm32f765`, `stm32f767`, `stm32f769`, `stm32f777`, `stm32f778`, `stm32f779`, `svd-f730`, `svd-f745`, `svd-f765`, `svd-f7x2`, `svd-f7x3`, `svd-f7x6`, `svd-f7x7`, and `svd-f7x9` and 4 more
= help: consider adding `stm32f405` as a feature in `Cargo.toml`
= note: see <https://doc.rust-lang.org/nightly/rustc/check-cfg/cargo-specifics.html> for more information about checking conditional configuration
|
|
unexpected `cfg` condition value: `stm32f479`:
src/timer/pwm_input.rs#L233
warning: unexpected `cfg` condition value: `stm32f479`
--> src/timer/pwm_input.rs:233:5
|
233 | feature = "stm32f479",
| ^^^^^^^^^^-----------
| |
| help: there is a expected value with a similar name: `"stm32f779"`
|
= note: expected values for `feature` are: `device-selected`, `display-interface`, `fmc`, `fmc_lcd`, `gpioj`, `gpiok`, `has-can`, `ltdc`, `rt`, `rtic`, `rtic-monotonic`, `stm32-fmc`, `stm32f722`, `stm32f723`, `stm32f730`, `stm32f730-lpc`, `stm32f732`, `stm32f733`, `stm32f745`, `stm32f746`, `stm32f756`, `stm32f765`, `stm32f767`, `stm32f769`, `stm32f777`, `stm32f778`, `stm32f779`, `svd-f730`, `svd-f745`, `svd-f765`, `svd-f7x2`, `svd-f7x3`, `svd-f7x6`, `svd-f7x7`, and `svd-f7x9` and 4 more
= help: consider adding `stm32f479` as a feature in `Cargo.toml`
= note: see <https://doc.rust-lang.org/nightly/rustc/check-cfg/cargo-specifics.html> for more information about checking conditional configuration
|
|
unexpected `cfg` condition value: `stm32f469`:
src/timer/pwm_input.rs#L232
warning: unexpected `cfg` condition value: `stm32f469`
--> src/timer/pwm_input.rs:232:5
|
232 | feature = "stm32f469",
| ^^^^^^^^^^-----------
| |
| help: there is a expected value with a similar name: `"stm32f769"`
|
= note: expected values for `feature` are: `device-selected`, `display-interface`, `fmc`, `fmc_lcd`, `gpioj`, `gpiok`, `has-can`, `ltdc`, `rt`, `rtic`, `rtic-monotonic`, `stm32-fmc`, `stm32f722`, `stm32f723`, `stm32f730`, `stm32f730-lpc`, `stm32f732`, `stm32f733`, `stm32f745`, `stm32f746`, `stm32f756`, `stm32f765`, `stm32f767`, `stm32f769`, `stm32f777`, `stm32f778`, `stm32f779`, `svd-f730`, `svd-f745`, `svd-f765`, `svd-f7x2`, `svd-f7x3`, `svd-f7x6`, `svd-f7x7`, and `svd-f7x9` and 4 more
= help: consider adding `stm32f469` as a feature in `Cargo.toml`
= note: see <https://doc.rust-lang.org/nightly/rustc/check-cfg/cargo-specifics.html> for more information about checking conditional configuration
|
|
unexpected `cfg` condition value: `stm32f446`:
src/timer/pwm_input.rs#L231
warning: unexpected `cfg` condition value: `stm32f446`
--> src/timer/pwm_input.rs:231:5
|
231 | feature = "stm32f446",
| ^^^^^^^^^^-----------
| |
| help: there is a expected value with a similar name: `"stm32f746"`
|
= note: expected values for `feature` are: `device-selected`, `display-interface`, `fmc`, `fmc_lcd`, `gpioj`, `gpiok`, `has-can`, `ltdc`, `rt`, `rtic`, `rtic-monotonic`, `stm32-fmc`, `stm32f722`, `stm32f723`, `stm32f730`, `stm32f730-lpc`, `stm32f732`, `stm32f733`, `stm32f745`, `stm32f746`, `stm32f756`, `stm32f765`, `stm32f767`, `stm32f769`, `stm32f777`, `stm32f778`, `stm32f779`, `svd-f730`, `svd-f745`, `svd-f765`, `svd-f7x2`, `svd-f7x3`, `svd-f7x6`, `svd-f7x7`, and `svd-f7x9` and 4 more
= help: consider adding `stm32f446` as a feature in `Cargo.toml`
= note: see <https://doc.rust-lang.org/nightly/rustc/check-cfg/cargo-specifics.html> for more information about checking conditional configuration
|
|
unexpected `cfg` condition value: `stm32f439`:
src/timer/pwm_input.rs#L230
warning: unexpected `cfg` condition value: `stm32f439`
--> src/timer/pwm_input.rs:230:5
|
230 | feature = "stm32f439",
| ^^^^^^^^^^-----------
| |
| help: there is a expected value with a similar name: `"stm32f769"`
|
= note: expected values for `feature` are: `device-selected`, `display-interface`, `fmc`, `fmc_lcd`, `gpioj`, `gpiok`, `has-can`, `ltdc`, `rt`, `rtic`, `rtic-monotonic`, `stm32-fmc`, `stm32f722`, `stm32f723`, `stm32f730`, `stm32f730-lpc`, `stm32f732`, `stm32f733`, `stm32f745`, `stm32f746`, `stm32f756`, `stm32f765`, `stm32f767`, `stm32f769`, `stm32f777`, `stm32f778`, `stm32f779`, `svd-f730`, `svd-f745`, `svd-f765`, `svd-f7x2`, `svd-f7x3`, `svd-f7x6`, `svd-f7x7`, and `svd-f7x9` and 4 more
= help: consider adding `stm32f439` as a feature in `Cargo.toml`
= note: see <https://doc.rust-lang.org/nightly/rustc/check-cfg/cargo-specifics.html> for more information about checking conditional configuration
|
|
unexpected `cfg` condition value: `stm32f437`:
src/timer/pwm_input.rs#L229
warning: unexpected `cfg` condition value: `stm32f437`
--> src/timer/pwm_input.rs:229:5
|
229 | feature = "stm32f437",
| ^^^^^^^^^^-----------
| |
| help: there is a expected value with a similar name: `"stm32f777"`
|
= note: expected values for `feature` are: `device-selected`, `display-interface`, `fmc`, `fmc_lcd`, `gpioj`, `gpiok`, `has-can`, `ltdc`, `rt`, `rtic`, `rtic-monotonic`, `stm32-fmc`, `stm32f722`, `stm32f723`, `stm32f730`, `stm32f730-lpc`, `stm32f732`, `stm32f733`, `stm32f745`, `stm32f746`, `stm32f756`, `stm32f765`, `stm32f767`, `stm32f769`, `stm32f777`, `stm32f778`, `stm32f779`, `svd-f730`, `svd-f745`, `svd-f765`, `svd-f7x2`, `svd-f7x3`, `svd-f7x6`, `svd-f7x7`, and `svd-f7x9` and 4 more
= help: consider adding `stm32f437` as a feature in `Cargo.toml`
= note: see <https://doc.rust-lang.org/nightly/rustc/check-cfg/cargo-specifics.html> for more information about checking conditional configuration
|
|
unexpected `cfg` condition value: `stm32f429`:
src/timer/pwm_input.rs#L228
warning: unexpected `cfg` condition value: `stm32f429`
--> src/timer/pwm_input.rs:228:5
|
228 | feature = "stm32f429",
| ^^^^^^^^^^-----------
| |
| help: there is a expected value with a similar name: `"stm32f769"`
|
= note: expected values for `feature` are: `device-selected`, `display-interface`, `fmc`, `fmc_lcd`, `gpioj`, `gpiok`, `has-can`, `ltdc`, `rt`, `rtic`, `rtic-monotonic`, `stm32-fmc`, `stm32f722`, `stm32f723`, `stm32f730`, `stm32f730-lpc`, `stm32f732`, `stm32f733`, `stm32f745`, `stm32f746`, `stm32f756`, `stm32f765`, `stm32f767`, `stm32f769`, `stm32f777`, `stm32f778`, `stm32f779`, `svd-f730`, `svd-f745`, `svd-f765`, `svd-f7x2`, `svd-f7x3`, `svd-f7x6`, `svd-f7x7`, and `svd-f7x9` and 4 more
= help: consider adding `stm32f429` as a feature in `Cargo.toml`
= note: see <https://doc.rust-lang.org/nightly/rustc/check-cfg/cargo-specifics.html> for more information about checking conditional configuration
|
|
unexpected `cfg` condition value: `stm32f427`:
src/timer/pwm_input.rs#L227
warning: unexpected `cfg` condition value: `stm32f427`
--> src/timer/pwm_input.rs:227:5
|
227 | feature = "stm32f427",
| ^^^^^^^^^^-----------
| |
| help: there is a expected value with a similar name: `"stm32f777"`
|
= note: expected values for `feature` are: `device-selected`, `display-interface`, `fmc`, `fmc_lcd`, `gpioj`, `gpiok`, `has-can`, `ltdc`, `rt`, `rtic`, `rtic-monotonic`, `stm32-fmc`, `stm32f722`, `stm32f723`, `stm32f730`, `stm32f730-lpc`, `stm32f732`, `stm32f733`, `stm32f745`, `stm32f746`, `stm32f756`, `stm32f765`, `stm32f767`, `stm32f769`, `stm32f777`, `stm32f778`, `stm32f779`, `svd-f730`, `svd-f745`, `svd-f765`, `svd-f7x2`, `svd-f7x3`, `svd-f7x6`, `svd-f7x7`, and `svd-f7x9` and 4 more
= help: consider adding `stm32f427` as a feature in `Cargo.toml`
= note: see <https://doc.rust-lang.org/nightly/rustc/check-cfg/cargo-specifics.html> for more information about checking conditional configuration
|
|
unexpected `cfg` condition value: `stm32f423`:
src/timer/pwm_input.rs#L226
warning: unexpected `cfg` condition value: `stm32f423`
--> src/timer/pwm_input.rs:226:5
|
226 | feature = "stm32f423",
| ^^^^^^^^^^-----------
| |
| help: there is a expected value with a similar name: `"stm32f723"`
|
= note: expected values for `feature` are: `device-selected`, `display-interface`, `fmc`, `fmc_lcd`, `gpioj`, `gpiok`, `has-can`, `ltdc`, `rt`, `rtic`, `rtic-monotonic`, `stm32-fmc`, `stm32f722`, `stm32f723`, `stm32f730`, `stm32f730-lpc`, `stm32f732`, `stm32f733`, `stm32f745`, `stm32f746`, `stm32f756`, `stm32f765`, `stm32f767`, `stm32f769`, `stm32f777`, `stm32f778`, `stm32f779`, `svd-f730`, `svd-f745`, `svd-f765`, `svd-f7x2`, `svd-f7x3`, `svd-f7x6`, `svd-f7x7`, and `svd-f7x9` and 4 more
= help: consider adding `stm32f423` as a feature in `Cargo.toml`
= note: see <https://doc.rust-lang.org/nightly/rustc/check-cfg/cargo-specifics.html> for more information about checking conditional configuration
|
|
unexpected `cfg` condition value: `stm32f417`:
src/timer/pwm_input.rs#L225
warning: unexpected `cfg` condition value: `stm32f417`
--> src/timer/pwm_input.rs:225:5
|
225 | feature = "stm32f417",
| ^^^^^^^^^^-----------
| |
| help: there is a expected value with a similar name: `"stm32f777"`
|
= note: expected values for `feature` are: `device-selected`, `display-interface`, `fmc`, `fmc_lcd`, `gpioj`, `gpiok`, `has-can`, `ltdc`, `rt`, `rtic`, `rtic-monotonic`, `stm32-fmc`, `stm32f722`, `stm32f723`, `stm32f730`, `stm32f730-lpc`, `stm32f732`, `stm32f733`, `stm32f745`, `stm32f746`, `stm32f756`, `stm32f765`, `stm32f767`, `stm32f769`, `stm32f777`, `stm32f778`, `stm32f779`, `svd-f730`, `svd-f745`, `svd-f765`, `svd-f7x2`, `svd-f7x3`, `svd-f7x6`, `svd-f7x7`, and `svd-f7x9` and 4 more
= help: consider adding `stm32f417` as a feature in `Cargo.toml`
= note: see <https://doc.rust-lang.org/nightly/rustc/check-cfg/cargo-specifics.html> for more information about checking conditional configuration
|
|
unexpected `cfg` condition value: `stm32f415`:
src/timer/pwm_input.rs#L224
warning: unexpected `cfg` condition value: `stm32f415`
--> src/timer/pwm_input.rs:224:5
|
224 | feature = "stm32f415",
| ^^^^^^^^^^-----------
| |
| help: there is a expected value with a similar name: `"stm32f765"`
|
= note: expected values for `feature` are: `device-selected`, `display-interface`, `fmc`, `fmc_lcd`, `gpioj`, `gpiok`, `has-can`, `ltdc`, `rt`, `rtic`, `rtic-monotonic`, `stm32-fmc`, `stm32f722`, `stm32f723`, `stm32f730`, `stm32f730-lpc`, `stm32f732`, `stm32f733`, `stm32f745`, `stm32f746`, `stm32f756`, `stm32f765`, `stm32f767`, `stm32f769`, `stm32f777`, `stm32f778`, `stm32f779`, `svd-f730`, `svd-f745`, `svd-f765`, `svd-f7x2`, `svd-f7x3`, `svd-f7x6`, `svd-f7x7`, and `svd-f7x9` and 4 more
= help: consider adding `stm32f415` as a feature in `Cargo.toml`
= note: see <https://doc.rust-lang.org/nightly/rustc/check-cfg/cargo-specifics.html> for more information about checking conditional configuration
|
|
unexpected `cfg` condition value: `stm32f413`:
src/timer/pwm_input.rs#L223
warning: unexpected `cfg` condition value: `stm32f413`
--> src/timer/pwm_input.rs:223:5
|
223 | feature = "stm32f413",
| ^^^^^^^^^^-----------
| |
| help: there is a expected value with a similar name: `"stm32f733"`
|
= note: expected values for `feature` are: `device-selected`, `display-interface`, `fmc`, `fmc_lcd`, `gpioj`, `gpiok`, `has-can`, `ltdc`, `rt`, `rtic`, `rtic-monotonic`, `stm32-fmc`, `stm32f722`, `stm32f723`, `stm32f730`, `stm32f730-lpc`, `stm32f732`, `stm32f733`, `stm32f745`, `stm32f746`, `stm32f756`, `stm32f765`, `stm32f767`, `stm32f769`, `stm32f777`, `stm32f778`, `stm32f779`, `svd-f730`, `svd-f745`, `svd-f765`, `svd-f7x2`, `svd-f7x3`, `svd-f7x6`, `svd-f7x7`, and `svd-f7x9` and 4 more
= help: consider adding `stm32f413` as a feature in `Cargo.toml`
= note: see <https://doc.rust-lang.org/nightly/rustc/check-cfg/cargo-specifics.html> for more information about checking conditional configuration
|
|
unexpected `cfg` condition value: `stm32f412`:
src/timer/pwm_input.rs#L222
warning: unexpected `cfg` condition value: `stm32f412`
--> src/timer/pwm_input.rs:222:5
|
222 | feature = "stm32f412",
| ^^^^^^^^^^-----------
| |
| help: there is a expected value with a similar name: `"stm32f722"`
|
= note: expected values for `feature` are: `device-selected`, `display-interface`, `fmc`, `fmc_lcd`, `gpioj`, `gpiok`, `has-can`, `ltdc`, `rt`, `rtic`, `rtic-monotonic`, `stm32-fmc`, `stm32f722`, `stm32f723`, `stm32f730`, `stm32f730-lpc`, `stm32f732`, `stm32f733`, `stm32f745`, `stm32f746`, `stm32f756`, `stm32f765`, `stm32f767`, `stm32f769`, `stm32f777`, `stm32f778`, `stm32f779`, `svd-f730`, `svd-f745`, `svd-f765`, `svd-f7x2`, `svd-f7x3`, `svd-f7x6`, `svd-f7x7`, and `svd-f7x9` and 4 more
= help: consider adding `stm32f412` as a feature in `Cargo.toml`
= note: see <https://doc.rust-lang.org/nightly/rustc/check-cfg/cargo-specifics.html> for more information about checking conditional configuration
|
|
unexpected `cfg` condition value: `stm32f407`:
src/timer/pwm_input.rs#L221
warning: unexpected `cfg` condition value: `stm32f407`
--> src/timer/pwm_input.rs:221:5
|
221 | feature = "stm32f407",
| ^^^^^^^^^^-----------
| |
| help: there is a expected value with a similar name: `"stm32f777"`
|
= note: expected values for `feature` are: `device-selected`, `display-interface`, `fmc`, `fmc_lcd`, `gpioj`, `gpiok`, `has-can`, `ltdc`, `rt`, `rtic`, `rtic-monotonic`, `stm32-fmc`, `stm32f722`, `stm32f723`, `stm32f730`, `stm32f730-lpc`, `stm32f732`, `stm32f733`, `stm32f745`, `stm32f746`, `stm32f756`, `stm32f765`, `stm32f767`, `stm32f769`, `stm32f777`, `stm32f778`, `stm32f779`, `svd-f730`, `svd-f745`, `svd-f765`, `svd-f7x2`, `svd-f7x3`, `svd-f7x6`, `svd-f7x7`, and `svd-f7x9` and 4 more
= help: consider adding `stm32f407` as a feature in `Cargo.toml`
= note: see <https://doc.rust-lang.org/nightly/rustc/check-cfg/cargo-specifics.html> for more information about checking conditional configuration
|
|
unexpected `cfg` condition value: `stm32f405`:
src/timer/pwm_input.rs#L220
warning: unexpected `cfg` condition value: `stm32f405`
--> src/timer/pwm_input.rs:220:5
|
220 | feature = "stm32f405",
| ^^^^^^^^^^-----------
| |
| help: there is a expected value with a similar name: `"stm32f765"`
|
= note: expected values for `feature` are: `device-selected`, `display-interface`, `fmc`, `fmc_lcd`, `gpioj`, `gpiok`, `has-can`, `ltdc`, `rt`, `rtic`, `rtic-monotonic`, `stm32-fmc`, `stm32f722`, `stm32f723`, `stm32f730`, `stm32f730-lpc`, `stm32f732`, `stm32f733`, `stm32f745`, `stm32f746`, `stm32f756`, `stm32f765`, `stm32f767`, `stm32f769`, `stm32f777`, `stm32f778`, `stm32f779`, `svd-f730`, `svd-f745`, `svd-f765`, `svd-f7x2`, `svd-f7x3`, `svd-f7x6`, `svd-f7x7`, and `svd-f7x9` and 4 more
= help: consider adding `stm32f405` as a feature in `Cargo.toml`
= note: see <https://doc.rust-lang.org/nightly/rustc/check-cfg/cargo-specifics.html> for more information about checking conditional configuration
|
|
unexpected `cfg` condition value: `stm32f401`:
src/timer/pwm_input.rs#L219
warning: unexpected `cfg` condition value: `stm32f401`
--> src/timer/pwm_input.rs:219:5
|
219 | feature = "stm32f401",
| ^^^^^^^^^^-----------
| |
| help: there is a expected value with a similar name: `"stm32f746"`
|
= note: expected values for `feature` are: `device-selected`, `display-interface`, `fmc`, `fmc_lcd`, `gpioj`, `gpiok`, `has-can`, `ltdc`, `rt`, `rtic`, `rtic-monotonic`, `stm32-fmc`, `stm32f722`, `stm32f723`, `stm32f730`, `stm32f730-lpc`, `stm32f732`, `stm32f733`, `stm32f745`, `stm32f746`, `stm32f756`, `stm32f765`, `stm32f767`, `stm32f769`, `stm32f777`, `stm32f778`, `stm32f779`, `svd-f730`, `svd-f745`, `svd-f765`, `svd-f7x2`, `svd-f7x3`, `svd-f7x6`, `svd-f7x7`, and `svd-f7x9` and 4 more
= help: consider adding `stm32f401` as a feature in `Cargo.toml`
= note: see <https://doc.rust-lang.org/nightly/rustc/check-cfg/cargo-specifics.html> for more information about checking conditional configuration
|
|
unexpected `cfg` condition value: `stm32f411`:
src/timer/pwm_input.rs#L209
warning: unexpected `cfg` condition value: `stm32f411`
--> src/timer/pwm_input.rs:209:11
|
209 | #[cfg(any(feature = "stm32f411",))]
| ^^^^^^^^^^-----------
| |
| help: there is a expected value with a similar name: `"stm32f746"`
|
= note: expected values for `feature` are: `device-selected`, `display-interface`, `fmc`, `fmc_lcd`, `gpioj`, `gpiok`, `has-can`, `ltdc`, `rt`, `rtic`, `rtic-monotonic`, `stm32-fmc`, `stm32f722`, `stm32f723`, `stm32f730`, `stm32f730-lpc`, `stm32f732`, `stm32f733`, `stm32f745`, `stm32f746`, `stm32f756`, `stm32f765`, `stm32f767`, `stm32f769`, `stm32f777`, `stm32f778`, `stm32f779`, `svd-f730`, `svd-f745`, `svd-f765`, `svd-f7x2`, `svd-f7x3`, `svd-f7x6`, `svd-f7x7`, and `svd-f7x9` and 4 more
= help: consider adding `stm32f411` as a feature in `Cargo.toml`
= note: see <https://doc.rust-lang.org/nightly/rustc/check-cfg/cargo-specifics.html> for more information about checking conditional configuration
|
|
unexpected `cfg` condition value: `stm32f410`:
src/timer/pwm_input.rs#L77
warning: unexpected `cfg` condition value: `stm32f410`
--> src/timer/pwm_input.rs:77:11
|
77 | #[cfg(not(feature = "stm32f410"))]
| ^^^^^^^^^^-----------
| |
| help: there is a expected value with a similar name: `"stm32f730"`
|
= note: expected values for `feature` are: `device-selected`, `display-interface`, `fmc`, `fmc_lcd`, `gpioj`, `gpiok`, `has-can`, `ltdc`, `rt`, `rtic`, `rtic-monotonic`, `stm32-fmc`, `stm32f722`, `stm32f723`, `stm32f730`, `stm32f730-lpc`, `stm32f732`, `stm32f733`, `stm32f745`, `stm32f746`, `stm32f756`, `stm32f765`, `stm32f767`, `stm32f769`, `stm32f777`, `stm32f778`, `stm32f779`, `svd-f730`, `svd-f745`, `svd-f765`, `svd-f7x2`, `svd-f7x3`, `svd-f7x6`, `svd-f7x7`, and `svd-f7x9` and 4 more
= help: consider adding `stm32f410` as a feature in `Cargo.toml`
= note: see <https://doc.rust-lang.org/nightly/rustc/check-cfg/cargo-specifics.html> for more information about checking conditional configuration
|
|
unexpected `cfg` condition value: `svd-f750`:
src/rcc/enable.rs#L176
warning: unexpected `cfg` condition value: `svd-f750`
--> src/rcc/enable.rs:176:5
|
176 | feature = "svd-f750",
| ^^^^^^^^^^----------
| |
| help: there is a expected value with a similar name: `"svd-f730"`
|
= note: expected values for `feature` are: `device-selected`, `display-interface`, `fmc`, `fmc_lcd`, `gpioj`, `gpiok`, `has-can`, `ltdc`, `rt`, `rtic`, `rtic-monotonic`, `stm32-fmc`, `stm32f722`, `stm32f723`, `stm32f730`, `stm32f730-lpc`, `stm32f732`, `stm32f733`, `stm32f745`, `stm32f746`, `stm32f756`, `stm32f765`, `stm32f767`, `stm32f769`, `stm32f777`, `stm32f778`, `stm32f779`, `svd-f730`, `svd-f745`, `svd-f765`, `svd-f7x2`, `svd-f7x3`, `svd-f7x6`, `svd-f7x7`, and `svd-f7x9` and 4 more
= help: consider adding `svd-f750` as a feature in `Cargo.toml`
= note: see <https://doc.rust-lang.org/nightly/rustc/check-cfg/cargo-specifics.html> for more information about checking conditional configuration
= note: `#[warn(unexpected_cfgs)]` on by default
|
|
unneeded sub `cfg` when there is only one condition:
src/timer/pwm_input.rs#L209
warning: unneeded sub `cfg` when there is only one condition
--> src/timer/pwm_input.rs:209:7
|
209 | #[cfg(any(feature = "stm32f411",))]
| ^^^^^^^^^^^^^^^^^^^^^^^^^^^ help: try: `feature = "stm32f411"`
|
= help: for further information visit https://rust-lang.github.io/rust-clippy/master/index.html#non_minimal_cfg
|
|
unneeded sub `cfg` when there is only one condition:
src/serial.rs#L541
warning: unneeded sub `cfg` when there is only one condition
--> src/serial.rs:541:7
|
541 | #[cfg(any(feature = "device-selected",))]
| ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^ help: try: `feature = "device-selected"`
|
= help: for further information visit https://rust-lang.github.io/rust-clippy/master/index.html#non_minimal_cfg
= note: `#[warn(clippy::non_minimal_cfg)]` on by default
|
|
field `0` is never read:
build.rs#L128
warning: field `0` is never read
--> build.rs:128:8
|
128 | Io(io::Error),
| -- ^^^^^^^^^
| |
| field in this variant
|
help: consider changing the field to be of unit type to suppress this warning while preserving the field numbering, or remove the field
|
128 | Io(()),
| ~~
|
|
field `0` is never read:
build.rs#L127
warning: field `0` is never read
--> build.rs:127:9
|
127 | Env(env::VarError),
| --- ^^^^^^^^^^^^^
| |
| field in this variant
|
= note: `#[warn(dead_code)]` on by default
help: consider changing the field to be of unit type to suppress this warning while preserving the field numbering, or remove the field
|
127 | Env(()),
| ~~
|
|
clippy_check
The following actions uses node12 which is deprecated and will be forced to run on node16: actions/checkout@v2, actions-rs/toolchain@v1, actions-rs/clippy-check@v1. For more info: https://github.blog/changelog/2023-06-13-github-actions-all-actions-will-run-on-node16-instead-of-node12-by-default/
|
|
clippy_check
The following actions uses Node.js version which is deprecated and will be forced to run on node20: actions/checkout@v2, actions-rs/toolchain@v1, actions-rs/clippy-check@v1. For more info: https://github.blog/changelog/2024-03-07-github-actions-all-actions-will-run-on-node20-instead-of-node16-by-default/
|
|
clippy_check
The `set-output` command is deprecated and will be disabled soon. Please upgrade to using Environment Files. For more information see: https://github.blog/changelog/2022-10-11-github-actions-deprecating-save-state-and-set-output-commands/
|
|
clippy_check
The `set-output` command is deprecated and will be disabled soon. Please upgrade to using Environment Files. For more information see: https://github.blog/changelog/2022-10-11-github-actions-deprecating-save-state-and-set-output-commands/
|
|
clippy_check
The `set-output` command is deprecated and will be disabled soon. Please upgrade to using Environment Files. For more information see: https://github.blog/changelog/2022-10-11-github-actions-deprecating-save-state-and-set-output-commands/
|
|
clippy_check
The `set-output` command is deprecated and will be disabled soon. Please upgrade to using Environment Files. For more information see: https://github.blog/changelog/2022-10-11-github-actions-deprecating-save-state-and-set-output-commands/
|