Releases: technyon/nuki_hub
Releases · technyon/nuki_hub
Nuki Hub 8.5
- Fix a regression (Issue #114): Intervals aren't initialized correctly
8.4
Nuki Hub 8.3
- Add support for M5Stack Atom POE
Note: The setting for device and GPIO has been split. If using a W5500 module with a detection PIN other than 26, it has to be reconfigured.
Nuki Hub 8.2
- Fix pairing issue: Downgrade NimBLE library to 1.4.0
Nuki Hub 8.1
- Fix potential MQTT connection problems (Issue #106)
Nuki Hub 8.0
- MQTT library replaced yet again. The old new library solved some problems but introduced new ones. Now using eqpMqttClient (https://github.com/bertmelis/espMqttClient), which looks a lot more mature than the previous libraries
- RSSI Publish interval unit switched from milliseconds to seconds. Please update your setting if you've enabled this.
- Using MQTT QOS 1 to make the delivery of messages more reliable
- Update Wifi Manager
- "Network Timeout until restart" now checks if the MQTT connection is interrupted instead of the Wifi connection. A disconnect on Wifi is not always reliably reported.
- Size for "MQTT SSL CA Certificate" increased to 2200 bytes to accomodate for larger certificates
- Disable certificate input fields when W5500 hardware is used which doesn't support encryption
- Fixed state_class abbreviation and unit for home assistant auto discovery
Nuki Hub 7.3
- Fixed issue #48, CSS not loading on chrome and other browsers.
Nuki Hub 7.2
- Fix RSSI publish interval for opener
- Add further check to make sure commands aren't executed after (re-)connect
Nuki Hub 7.1
- Make RSSI publish interval configurable. Defaults to disabled.
Nuki Hub 7.0
- Replace MQTT library PubSubClient with Arduino MQTT library, because the former has memory corruption issues
- Fix opener pairing state actually showing lock pairing state
- Fix crash when only opener is enabled and lock is disabled
- Fix opener topics being created when opener is disabled