Skip to content

Latest commit

 

History

History
230 lines (159 loc) · 7.62 KB

CHANGELOG.md

File metadata and controls

230 lines (159 loc) · 7.62 KB
Raw

0.10.1

  • Update parking_lot dependency. See PR 126.

  • Flush socket while waiting for next frame. See PR 130.

0.10.0

  • Default to WindowUpdateMode::OnRead, thus enabling full Yamux flow-control, exercising back pressure on senders, preventing stream resets due to reaching the buffer limit.

    See the WindowUpdateMode documentation for details, especially the section on deadlocking when sending data larger than the receivers window.

0.9.0

  • Force-split larger frames, for better interleaving of reads and writes between different substreams and to avoid single, large writes. By default frames are capped at, and thus split at, 16KiB, which can be adjusted by a new configuration option, if necessary.

  • Send window updates earlier, when half of the window has been consumed, to minimise pauses due to transmission delays, particularly if there is just a single dominant substream.

  • Avoid possible premature stream resets of streams that have been properly closed and already dropped but receive window update or other frames while the remaining buffered frames are still sent out. Incoming frames for unknown streams are now ignored, instead of triggering a stream reset for the remote.

0.8.1

  • Avoid possible premature stream resets of streams that have been properly closed and already dropped but receive window update or other frames while the remaining buffered frames are still sent out. Incoming frames for unknown streams are now ignored, instead of triggering a stream reset for the remote.

0.8.0

  • Upgrade step 4 of 4. This version always assumes the new semantics and no longer sets the non-standard flag in intial window updates.
  • The configuration option lazy_open is removed. Initial window updates are sent automatically if the receive window is configured to be larger than the default.

0.7.0

Upgrade step 3 of 4. This version sets the non-standard flag, but irrespective of whether it is present or not, always assumes the new additive semantics of the intial window update.

0.6.0

Upgrade step 2 of 4. This version sets the non-standard flag, version 0.5.0 already recognises.

0.5.0

This version begins the upgrade process spawning multiple versions that changes the meaning of the initial window update from "This is the total size of the receive window." to "This is the size of the receive window in addition to the default size." This is necessary for compatibility with other yamux implementations. See issue #92 for details.

As a first step, version 0.5.0 interprets a non-standard flag to imply the new meaning. Future versions will set this flag and eventually the new meaning will always be assumed. Upgrading from the current implemention to the new semantics requires deployment of every intermediate version, each of which is only compatible with its immediate predecessor. Alternatively, if the default configuration together with lazy_open set to true is deployed on all communicating endpoints, one can skip directly to the end of the transition.

0.4.9

  • Bugfixes (#93).

0.4.8

  • Bugfixes (#91).
  • Improve documentation (#88).

0.4.7

  • Bugfix release (#85).

0.4.6

  • Send RST frame if the window of a dropped stream is 0 and it is in state SendClosed (#84).

0.4.5

  • Removed bytes (#77) and thiserror (#78) dependencies.
  • Removed implicit BufWriter creation (#77). Client code that depends on this (undocumented) behaviour needs to wrap the socket in a BufWriter before passing it to Connection::new.
  • Added Connection::is_closed flag (#80) to immediately return Ok(None) from Connection::next_stream after Err(_) or Ok(None) have been returned previously.

0.4.4

  • Control and stream command channels are now closed and drained immediately on error. This is done to prevent client code from submitting further close or other commands which will never be acted upon since the API contract of Connection::next_stream is that after None or an Err(_) is returned it must not be called again.

0.4.3

  • Updates nohash-hasher dependency to v0.2.0.

0.4.2

  • A new configuration option lazy_open (off by default) has been added and inbound streams are now acknowledged (#73). If lazy_open is set to true we will not immediately send an initial WindowUpdate frame but instead just set the SYN flag on the first outbound Data frame. See Configuration::set_lazy_open for details.

0.4.1

  • Log connection reset errors on debug level (#72).

0.4.0

  • Hide StreamId::new and update dependencies.

0.3.0

Update to use and work with async/await:

  • Config::set_max_pending_frames has been removed. Internal back-pressure made the setting unnecessary. As another consequence the error ConnectionError::TooManyPendingFrames has been removed.
  • Connection no longer has methods to open a new stream or to close the connection. Instead a separate handle type Control has been added which allows these operations concurrently to the connection itself.
  • In Yamux 0.2.x every StreamHandle I/O operation would drive the Connection. Now, the only way the Connection makes progress is through its next_stream method which must be called continuously. For convenience a function into_stream has been added which turns the Connection into a futures::stream::Stream impl, invoking next_stream in its poll_next method.
  • StreamHandle has been renamed to Stream and its methods credit and state have been removed.
  • Stream also implements futures::stream::Stream and produces Packets.
  • ConnectionError::StreamNotFound has been removed. Incoming frames for unknown streams are answered with a RESET frame, unless they finish the stream.
  • DecodeError has been renamed to FrameDecodeError and DecodeError::Type corresponds to FramedDecodeError::Header which handles not just unknown frame type errors, but more. Hence a new error HeaderDecodeError has been added for those error cases.

0.2.2

  • Updated dependencies (#56).

0.2.1

  • Bugfix release (pull request #54).

0.2.0

  • Added max_pending_frames setting to Config. A Connection buffers outgoing frames up to this limit (see pull request #51).
  • Added ConnectionError::TooManyPendingFrames if max_pending_frames has been reached.
  • Changed error types of Connection::close and Connection::flush from std::io::Error to yamux::ConnectionError.
  • Removed Connection::shutdown method which was deprecated since version 0.1.8.

0.1.9

  • Add read_after_close setting to Config which defaults to true to match the behaviour of previous versions. Setting read_after_close to false will cause stream reads to return with Ok(0) as soon as the connection is closed, preventing them from reading data from their buffer.

0.1.8

  • Mark Connection::shutdown as deprecated (#44).

0.1.7

  • Bugfix release (#36).
  • Support for half-closed streams (#38).
  • Avoids redundant RESET frames (#37).
  • Better test coverage (#40, #42).

0.1.6

  • Bugfix release (pull requests #34 and #35).

0.1.5

  • Bugfix release (pull request #33).

0.1.4

  • Bugfix release (pull requests #30 and #31).

0.1.3

  • Bugfix release (pull requests #27 and #28).

0.1.2

  • Bugfix release. See pull request #26 for details.

0.1.1

  • Forward Stream::poll to the newly added Connection::poll method which accepts self as a shared reference. See pull request #24 for details.

0.1

  • Initial release.