DHT11_ESP32

The project is mainly about reading the ambient temperature and humidity using a DHT11 sensor and an ESP32

Pin Configuration:

• The + or VCC is connected to the 3V3 or 3.3V pin of the ESP32

• The - or ground is connected to the GND pin of the ESP32

• The midle pin or data pin is connected the GPIO4 of the ESP32
• Connect the I2C LCD acordingly (SDA to 21 and CLK to 22 of ESP32)
• Don't forget to connect the VCC of the LCD to 5V or VIN of the ESP32
• The DHT sensor library for ESPx by Bernd Giesecke is required
• The simualtion of version 1.0 is avaliable on Wokwi.com at
• https://wokwi.com/projects/355569587735816193
• The simualtion of version 1.0.1 is available at
• https://wokwi.com/projects/358989916399451137
• The simulation of version 1.0.2 has WIFI feature and data plotting feature using ThingSpeak
• https://wokwi.com/projects/365254628263680001