This repository has been archived by the owner on Nov 9, 2023. It is now read-only.
Tested hardware boards
The list of hardware boards tested by us or the community.
| Arduino | DW1000 |
|---|---|
| 2 | IRQ (if used) |
| 10 | CS |
| 11 | MOSI |
| 12 | MISO |
| 13 | CLK |
| NodeMCU 1.0 | DW1000 |
|---|---|
| D5 (GPIO14) | CLK |
| D6 (GPIO12) | MISO |
| D7 (GPIO13) | MOSI |
| D8 (GPIO15) | CS |
| FemtoBeacon | DW1000 |
|---|---|
| 14 | CLK |
| 12 | MISO |
| 13 | MOSI |
| 18 | CS (DECAWAVE) |
This is the guide to use Blue Pill with Arduino environment --> BluPill - Arduino
| F103 | DWM1000 |
|---|---|
| PA4 | 17 - CS |
| PA7 | 18 - MOSI |
| PA6 | 19 - MISO |
| AP5 | 20 - CLK |
| PB5 | 22 - IRQ |
| PA0 | 3 - RST |
Could be useful to take a look at the TREK1000 schematic diagram
Shield from @kromash --> https://github.com/kromash/stm32-dwm1000-shield
| TEENSY | DWM1000 | Note |
|---|---|---|
| 10 | CS | |
| 11 | MOSI | |
| 12 | MISO | |
| 13 | CLK | |
| 2 | IRQ | |
| 9 | RST | 10Kohm pull-down |
used breakout for dwm1000.