Skip to content

v0.28
Compare
Choose a tag to compare
@CarVac CarVac released this 09 Jan 04:35
· 114 commits to main since this release
v0.28
e256791
This commit was created on GitHub.com and signed with GitHub’s verified signature. The key has expired.
GPG key ID: 4AEE18F83AFDEB23
Expired
Learn about vigilant mode.

This is the first release supporting the PhobGCC 2.0 motherboard, with PhobVision for configuration and calibration!

For PhobGCC 1 users, we do recommend updating; there is a feature that will prevent the need to reset after future upgrades. You must reset your controller after updating for this version, though.

Bugfixes:

  • Mode 7 on the L trigger now properly uses the L offset.
  • When the stick is grossly miscalibrated, this no longer impacts future proper calibrations. You should no longer ever need to hard reset (though the command still exists).
  • The PM/P+ salty runback command no longer accidentally triggers the Safe Mode toggle.
  • Internally (doesn't affect play in practice) the controller more precisely runs at 1000 Hz.

New features:

  • PhobVision, which is a feature strictly for PhobGCC 2, outputs composite video directly from the controller, providing menus for configuration and calibration. Hold the Z button while you plug the controller into a console or GCC-USB adapter to have it output video (it won't communicate with the console or adapter).
  • 1.0 cardinal snapping is now more lenient, 1 unit wider on either side (6 instead of 5) and now snapping anywhere outside the Melee unit circle (>80 instead of >95). This is in line with an upcoming version of UCF.
  • The rumble strength settings go weaker now. To convert from the old setting to the new setting, add 4. What used to be 5 is now 9. The range is 0 to 11.
  • Not usable yet, but there is now a framework in place to migrate to newer firmware versions, as long as you start with v0.28. When you install a newer firmware version, it'll automatically migrate all your settings with no need to perform a reset.

Configuration document here: https://github.com/PhobGCC/PhobGCC-doc/blob/main/For_Users/Phob_Calibration_Guide_v0.28.md
Phob 1 programming guide here: https://github.com/PhobGCC/PhobGCC-doc/blob/main/For_Users/Phob_Programming_Guide.md

For Phob 2, to install the firmware, simply hold the button on the PCB while connecting to your computer using USB, and drag and drop the .uf2 firmware file into the USB Mass Storage device.

Assets 3
Loading