code sync #113
Merged
code sync #113
Conversation
This file contains bidirectional Unicode text that may be interpreted or compiled differently than what appears below. To review, open the file in an editor that reveals hidden Unicode characters.
Learn more about bidirectional Unicode characters
- increase timeout for power supply driver initialization
…ent v2.0.0191 (#3371) temp_xxxx_module{} => module{}_temp_xxxx
Updated z9264_platform.sh to change appropriate LED when HWSKU is changed.
mellanox simx platform don't have QSFP sysfs created, this script will cause timeout issue on simx platform Signed-off-by: Kebo Liu <kebol@mellanox.com>
Users can install docker with sudo, and it requires sudo to issue docker command. This will cause few errors in Makefile.work which need use docker without sudo.
* Create the src archive in target/ when INSTALL_DEBUG_TOOLS=y * Dropped -v (verbose flag) from tar command
* [Makefile] make reset target changed to ONESHELL and multiarch docker stop has been added in reset Signed-off-by: Antony Rheneus <arheneus@marvell.com>
…base_config.json (#2182) this is the first step to moving different databases tables into different database instances in this PR, only handle multiple database instances creation based on user configuration at /etc/sonic/database_config.json we keep current method to create single database instance if no extra/new DATABASE configuration exist in database_config.json file. if user try to configure more db instances at database_config.json , we create those new db instances along with the original db instance existing today. The configuration is as below, later we can add more db related information if needed: { ... "DATABASE": { "redis-db-01" : { "port" : "6380", "database": ["APPL_DB", "STATE_DB"] }, "redis-db-02" : { "port" : "6381", "database":["ASIC_DB"] }, } ... } The detail description is at design doc at sonic-net/SONiC#271 The main idea is : when database.sh started, we check the configuration and generate corresponding scripts. rc.local service handle old_config copy when loading new images, there is no dependency between rc.local and database service today, for safety and make sure the copy operation are done before database try to read it, we make database service run after rc.local Then database docker started, we check the configuration and generate corresponding scripts/.conf in database docker as well. based on those conf, we create databases instances as required. at last, we ping_pong check database are up and continue Signed-off-by: Dong Zhang d.zhang@alibaba-inc.com
* [platform/cel]: Add new api installer * [device/celestica]: Update APIs to support both pmon and base image * [device/e1031]: update hwmon name
Signed-off-by: chiourung_huang <chiourung_huang@edge-core.com>
optimize SFP module operations and fix issues. - split initialization of variant categories of devices and initialize each category of devices only when needed, so that unnecessary dependencies can be avoided. - update watchdog logic, only initializing watchdog when referenced. - support platform.py and enable to initialize variant devices on a host/docker basis - update init so that sonic_platform can be imported as a whole.
Signed-off-by: Zhenggen Xu <zxu@linkedin.com>
* Fixed initial state for eeprom.py and sfputil.py when thrift server is down * Added transceiver plug-in/out event processing Signed-off-by: Andriy Kokhan <akokhan@barefootnetworks.com>
Docker version above 18 has inconsistent behaviour with qemu. Hence using the same version 18 used in sonic-slave Signed-off-by: Antony Rheneus <arheneus@marvell.com>
… swsscommon (#3264) Update interfaces of bgpcfd from swsssdk to swsscommon to unify a suit of interface with other component. Meanwhile, we can listen multiple tables at one thread under swsscommon interface. Signed-off-by: Ze Gan ganze718@gmail.com - What I did Move the interface of bgpcfgd from swsssdk to swsscommon. Because bgpcfgd need to listen more events in the future and we want to maintain one kind of APIs, swsscommon is more suitable than swsssdk. - How I did it Refactor the BGPConfigDaemon to two components, Daemon and BGPConfigManager. We can register new managers to the Daemon object if we want to listen more events.
* Update sonic-quagga submodule * [libteam]: timerfd read() could return 0
* Add patch to support IPv6 * Add support for IPv6 * Remove in-correct changes by IPv6 support patch
This piece of information is currently not used. Revert this pull request in the future to add back the default mirror session information into the configuration database. Signed-off-by: Shu0T1an ChenG <shuche@microsoft.com>
Submodule src/sonic-utilities 4024019: [doc/command-reference.md] dos2unix & remove trailing spaces (#591) [show] Add BGP neighbor info to 'show ip/ipv6 interfaces' command output (#598) [config]: fix the runtime error of the 'show line' command (#595) (#596) Revert "Removed 'show interfaces alias'. (#412)" (#603) [debug][undebug] Rework of CLI for BGP (#583) Changing "show runningconfiguration interface" to "show runningconfiguration ports" (#600) [config] Add commands to add/remove DHCP server address from a VLAN (#585) [neighbor_advertiser] Use full vlan name for vxlan tunnel map programming (#604) [neighbor_advertise]: Use the existing MIRROR ACL table (#605) Read config DB for running interface(s) and display per port/interface (#594) [fast/warm reboot] kill radv docker before stopping BGP (#608) [config] Add commands for adding/removing syslog servers (#609) [config] Call 'systemctl reset-failed' before 'systemctl restart' when restarting services (#607) [Command Reference] Add config commands for DHCP relay destination address (#610) [config] Add commands for adding/removing NTP servers (#611) [neighbor_advertiser]: Add V6 support to mirror ICMPV6 packets (#612) [neighbor advertiser] try getting vlan addresses from o.s first (#613) [show] Add command 'show runningconfiguration syslog' (#617) [show] Add command 'show runningconfig ntp' (#620) Added check to config syslog del to verify if ip address was configured. (#622) [fast-reboot] Check if ASIC config has changed before warm reboot (#621) Signed-off-by: Danny Allen daall@microsoft.com
…tem (#3384) [build_debian] Generate checksum of ASIC config files * Adds script to generate checksums for ASIC config files * Adds step to build_debian that copies ASIC config checksum into SONiC filesystem Signed-off-by: Danny Allen daall@microsoft.com
This switch has 64 QSFP28 (40G/100G) ports, 2 SFP+ (1G/10G) ports on Broadcom Tomahawk II chipset. CPU used in QFX5210-64C-S is Intel Broadwell-DE. The machine has Redundant and hot-swappable Power Supply (1+1) and also has Redundant and hot swappable fans (3+1). Signed-off-by: Ciju Rajan K <crajank@juniper.net>
* Use dot1p to tc mapping for backend switches Signed-off-by: Wenda Ni <wenni@microsoft.com> * Do not write DSCP to TC mapping into CONFIG_DB or config_db.json for storage switches Signed-off-by: Wenda Ni <wenni@microsoft.com>
#3397) * [dhcp_relay]:filter out the ipv6 address of dhcp server for dhcp relay(v4) config file. Signed-off-by: wangshengjun <wangshengjun@asterfusion.com>
Implemented remaining APIs in s6100,z9100,s6000 Removed soft link in s6100,s6000,z9100 and implemented seperately Implemented get_transceiver_change_event in S6000
* [device/celestica]: Update fan and psu apis * [device/celestica]: Update sfp apis
- Add support for fans in new platform API - Mount platform API in pmon for arista platforms
tiantianlv
requested review from
mudsut4ke and
bbinxie
and removed request for
mudsut4ke
bbinxie
approved these changes
Sep 11, 2019
mudsut4ke
pushed a commit
that referenced
this pull request
Jan 25, 2021
…nic-net#5924) This should also fix the vsimage check build. Commits include: * src/sonic-platform-common a659219...e4883e5 (7): > [PsuBase] Reference inherited member constant (#142) > Thermalctld APIs for recording min and max temp (#131) > Common power consumption and supply APIs for modular chassis (#136) > [sonic-platform-base] Introduce APIs for modular chassis support (#124) > Remove shebangs from non-executable Python files (#140) > [sonic_eeprom] Make compatible with Python 2 and 3 (#127) > Add unit test infrastructure (#139) * src/sonic-platform-daemons 600d043...be21d91 (9): > [psud] Import of mock libraries determined by environment variable (#117) > [chassisd][thermalctld] Set testing env var at top of file, not in setup_function() (#114) > [chassisd][thermalctld] Import os module, now needed for env var checking (#113) > [chassisd][thermalctld] Import mock libraries based on environment variable (#112) > [xcvrd] Fix the console-script xcvrd startup (#111) > [Thermalctld] Update thermal info to CHASSIS_STATE_DB (#101) > PSUd changes to compute power-budget for Modular chassis (#104) > Introduce chassisd to monitor status of cards on chassis (#97) > [xcvrd] support for integrating Credo Y cable Ports initialization and status updates with xcvrd. (#105)
mudsut4ke
pushed a commit
that referenced
this pull request
Jan 28, 2022
2cd6236 [voq][chassis] Fix for issue in chassis redis server connection check (#110) 9da577d [port_util] Fix issue in function get_interface_oid_map (#114) 740a44c [port_util] Allow system without ports in config db run without errors (#109) d07682e Merge pull request #111 from xumia/azp-coverage 482cac2 [Ethernet-IB][index] Modifed the port_util to support the VoQ Inband Port (#113) 69eac92 Support azp diff coverage Signed-off-by: liora <liora@nvidia.com>
Sign up for free
to join this conversation on GitHub.
Already have an account?
Sign in to comment
Add this suggestion to a batch that can be applied as a single commit.
This suggestion is invalid because no changes were made to the code.
Suggestions cannot be applied while the pull request is closed.
Suggestions cannot be applied while viewing a subset of changes.
Only one suggestion per line can be applied in a batch.
Add this suggestion to a batch that can be applied as a single commit.
Applying suggestions on deleted lines is not supported.
You must change the existing code in this line in order to create a valid suggestion.
Outdated suggestions cannot be applied.
This suggestion has been applied or marked resolved.
Suggestions cannot be applied from pending reviews.
Suggestions cannot be applied on multi-line comments.
Suggestions cannot be applied while the pull request is queued to merge.
Suggestion cannot be applied right now. Please check back later.
- What I did
- How I did it
- How to verify it
- Description for the changelog
- A picture of a cute animal (not mandatory but encouraged)