- Flatten V-Slot around the T-Nut for cleaner engagement
- Mod frame to have Tn inset with a filler to allow 2 colour prints of them and have them clearly marked
- Add small lip to the DB back plate to lock it in place
- Make short DB version (can only user short DBs for all tools if used)
- Make BOM
- Upload CAD
- Test Knomi Container
- Test Knomi2 Container
- Add a Halo Container
- Add blank Container to build off of
- Add grill Container
- Add XOL
- Add Blackbird
- Add Config per Types
- Make install instructions
- Add frame links, left L/S, right L/S, middle LL/LS/SL/SS (if no crossbar)
- Convert wiper to be modular
- Sprung Steel Wiper
- PTFE Wiper
- Optional Brass Brush holder behind Wiper to brush as you pickup
- Optional Tray to catch what the brush drops (held by magnets for easy cleaning)
- Make sure all holes follow 3dp standards
- Potentially add 3 heights, SB, SB + Hat or DB, DB + Hat (But again you can not mix and match)
- Convert Container to be 1515 compat so it works with 2020 and 1515 frames
- Make the top and bottom of the frame into replacable pieces (this is where the 2020 to 1515 will happen)
- Remove the 2020 thickness of the frame and only use the 1515 to reduce parts, the frame ends will sort the options
- Add 5mm to the DB to DB links, the space will help clear wider extruders and looks better
- Make 1515 tops and bottoms and links
This repository has been archived by the owner on Mar 6, 2024. It is now read-only.