MOVED TO https://github.com/Stealthchanger/ModularDock

Modular-Dock - WIP

Modular Dock for StealthChanger (TapChanger)

This dock is a slide in type. The back plate will allow for you to adjust the tool to be at perfect 90, I'd recommend 1 degree forward just to keep the dock in place. Magnets are 2x5s and are optional, but recommened.

See TODO

Print

Settings

All print settings are the same as Voron Standards or better.

Orientation

• Frame/L Bracket Flat on it's face
• Base on it's back (connection with the back plate down)
• Back plate on it's front (connection with the base down)
• Container Flat on it's face

Print list

• 1 frame
• 1 frame L bracket (optional)
• 1 frame base [type] (not required if using crossbar) WIP
• 1 [tooltype] Base
• 1 [tooltype] Back [type]
• 1 Wiper [type]
• 1 Container [type] (optional) WIP
• Combination of Links (only if not using crossbar for docks)

NOTE: if you use the Dragonburnder short dock, you can not use any others, all docks much be the same length or the gantry well crash into the back of the longer docks.

Build

There is lots of hardware and heatsets, this is for improved regidity.

Coming Soon

BOM

Coming Soon