Revert "* Fix z distance Method PVA from 0.4 to 0 and interface line …

…width from 0.25mm to 0.4mm" This reverts commit bc95ae1.
Ultimaker · Jul 24, 2024 · a027307 · a027307
1 parent bc95ae1
commit a027307
Show file tree

Hide file tree

Showing 103 changed files with 181 additions and 20 deletions.
diff --git a/resources/definitions/ultimaker.def.json b/resources/definitions/ultimaker.def.json
@@ -129,6 +129,7 @@
         "support_line_distance": { "minimum_value_warning": "0 if support_structure == 'tree' else support_line_width" },
         "support_tower_maximum_supported_diameter": { "value": "support_tower_diameter" },
         "support_tower_roof_angle": { "value": "0 if support_interface_enable else 65" },
+        "support_use_towers": { "value": false },
         "support_wall_count": { "value": "1 if support_structure == 'tree' else 0" },
         "support_xy_distance_overhang": { "value": "0.2" },
         "support_z_distance": { "value": "0" },
@@ -138,8 +139,7 @@
         "wall_x_material_flow_layer_0": { "value": "0.95 * material_flow_layer_0" },
         "xy_offset": { "value": "-layer_height * 0.1" },
         "xy_offset_layer_0": { "value": "-wall_line_width_0 / 5 + xy_offset" },
-        "z_seam_corner": { "value": "'z_seam_corner_weighted'" },
-        "z_seam_relative": { "value": "True" },
+        "z_seam_corner": { "value": "'z_seam_corner_none'" },
         "zig_zaggify_support": { "value": true }
     }
 }
diff --git a/resources/definitions/ultimaker_method_base.def.json b/resources/definitions/ultimaker_method_base.def.json
@@ -413,7 +413,6 @@
         "support_roof_height": { "value": "4*layer_height" },
         "support_roof_material_flow": { "value": "material_flow" },
         "support_supported_skin_fan_speed": { "value": "cool_fan_speed_max" },
-        "support_use_towers": { "value": "False" },
         "support_wall_count": { "value": "2 if support_conical_enabled or support_structure == 'tree' else 0" },
         "support_xy_distance": { "value": 0.2 },
         "support_xy_distance_overhang": { "value": "support_xy_distance" },

diff --git a/resources/quality/ultimaker_method/um_method_1c_um-nylon12-cf-175_0.2mm.inst.cfg b/resources/quality/ultimaker_method/um_method_1c_um-nylon12-cf-175_0.2mm.inst.cfg
@@ -38,6 +38,7 @@ support_bottom_stair_step_height = 0
 support_infill_rate = 12.0
 support_line_width = =line_width * 0.75
 support_roof_density = 85
+support_use_towers = True
 support_xy_distance = 0.3
 support_z_distance = 0.25
 
diff --git a/resources/quality/ultimaker_method/um_method_2a_um-pva-175_0.2mm.inst.cfg b/resources/quality/ultimaker_method/um_method_2a_um-pva-175_0.2mm.inst.cfg
@@ -56,14 +56,14 @@ support_conical_min_width = 20
 support_fan_enable = False
 support_infill_density_multiplier_initial_layer = 2
 support_infill_rate = 12
-support_interface_offset = 0
+support_interface_offset = 1
 support_interface_wall_count = 2
 support_offset = 1.8
 support_pattern = grid
 support_roof_density = 95
 support_roof_height = =layer_height*8
-support_roof_line_width = 0.4
-support_use_towers = True
+support_roof_line_width = 0.25
+support_top_distance = 0.4
 switch_extruder_extra_prime_amount = 1
 switch_extruder_retraction_amount = 2.5
 switch_extruder_retraction_speeds = 3

diff --git a/resources/quality/ultimaker_method/um_method_labs_um-nylon12-cf-175_0.2mm.inst.cfg b/resources/quality/ultimaker_method/um_method_labs_um-nylon12-cf-175_0.2mm.inst.cfg
@@ -38,6 +38,7 @@ support_bottom_stair_step_height = 0
 support_infill_rate = 12.0
 support_line_width = =line_width * 0.75
 support_roof_density = 85
+support_use_towers = True
 support_xy_distance = 0.3
 support_z_distance = 0.25
 
diff --git a/resources/quality/ultimaker_methodx/um_methodx_1c_um-abscf-175_0.2mm.inst.cfg b/resources/quality/ultimaker_methodx/um_methodx_1c_um-abscf-175_0.2mm.inst.cfg
@@ -50,6 +50,7 @@ support_line_width = 0.35
 support_material_flow = 90
 support_roof_density = 82
 support_roof_line_width = 0.4
+support_use_towers = True
 support_xy_distance = 0.3
 support_xy_distance_overhang = 0.25
 support_z_distance = 0.15

diff --git a/resources/quality/ultimaker_methodx/um_methodx_1c_um-absr-175_0.2mm.inst.cfg b/resources/quality/ultimaker_methodx/um_methodx_1c_um-absr-175_0.2mm.inst.cfg
@@ -55,6 +55,7 @@ support_roof_density = 85
 support_roof_wall_count = 1
 support_supported_skin_fan_speed = 60.0
 support_top_distance = =support_z_distance
+support_use_towers = False
 support_xy_distance = 0.35
 support_xy_distance_overhang = 0.25
 support_xy_overrides_z = xy_overrides_z

diff --git a/resources/quality/ultimaker_methodx/um_methodx_1c_um-asa-175_0.2mm.inst.cfg b/resources/quality/ultimaker_methodx/um_methodx_1c_um-asa-175_0.2mm.inst.cfg
@@ -52,6 +52,7 @@ support_material_flow = =0.85*material_flow
 support_roof_density = 85
 support_supported_skin_fan_speed = 60.0
 support_top_distance = =support_z_distance
+support_use_towers = False
 support_xy_distance = 0.35
 support_xy_distance_overhang = 0.25
 support_xy_overrides_z = xy_overrides_z

diff --git a/resources/quality/ultimaker_methodx/um_methodx_1c_um-nylon12-cf-175_0.2mm.inst.cfg b/resources/quality/ultimaker_methodx/um_methodx_1c_um-nylon12-cf-175_0.2mm.inst.cfg
@@ -38,6 +38,7 @@ support_bottom_stair_step_height = 0
 support_infill_rate = 12.0
 support_line_width = =line_width * 0.75
 support_roof_density = 85
+support_use_towers = True
 support_xy_distance = 0.3
 support_z_distance = 0.25
 
diff --git a/resources/quality/ultimaker_methodx/um_methodx_1xa_um-absr-175_0.2mm.inst.cfg b/resources/quality/ultimaker_methodx/um_methodx_1xa_um-absr-175_0.2mm.inst.cfg
@@ -55,6 +55,7 @@ support_roof_density = 85
 support_roof_wall_count = 1
 support_supported_skin_fan_speed = 60.0
 support_top_distance = =support_z_distance
+support_use_towers = False
 support_xy_distance = 0.35
 support_xy_distance_overhang = 0.25
 support_xy_overrides_z = xy_overrides_z

diff --git a/resources/quality/ultimaker_methodx/um_methodx_1xa_um-asa-175_0.2mm.inst.cfg b/resources/quality/ultimaker_methodx/um_methodx_1xa_um-asa-175_0.2mm.inst.cfg
@@ -52,6 +52,7 @@ support_material_flow = =0.85*material_flow
 support_roof_density = 85
 support_supported_skin_fan_speed = 60.0
 support_top_distance = =support_z_distance
+support_use_towers = False
 support_xy_distance = 0.35
 support_xy_distance_overhang = 0.25
 support_xy_overrides_z = xy_overrides_z

diff --git a/resources/quality/ultimaker_methodx/um_methodx_2a_um-pva-175_0.2mm.inst.cfg b/resources/quality/ultimaker_methodx/um_methodx_2a_um-pva-175_0.2mm.inst.cfg
@@ -56,14 +56,14 @@ support_conical_min_width = 20
 support_fan_enable = False
 support_infill_density_multiplier_initial_layer = 2
 support_infill_rate = 12
-support_interface_offset = 0
+support_interface_offset = 1
 support_interface_wall_count = 2
 support_offset = 1.8
 support_pattern = grid
 support_roof_density = 95
 support_roof_height = =layer_height*8
-support_roof_line_width = 0.4
-support_use_towers = True
+support_roof_line_width = 0.25
+support_top_distance = 0.4
 switch_extruder_extra_prime_amount = 1
 switch_extruder_retraction_amount = 2.5
 switch_extruder_retraction_speeds = 3

diff --git a/resources/quality/ultimaker_methodx/um_methodx_2xa_um-rapidrinse-175_0.2mm.inst.cfg b/resources/quality/ultimaker_methodx/um_methodx_2xa_um-rapidrinse-175_0.2mm.inst.cfg
@@ -32,11 +32,10 @@ support_conical_angle = 20
 support_conical_enabled = True
 support_conical_min_width = 20
 support_fan_enable = False
-support_interface_offset = 0
+support_interface_offset = 1
 support_interface_wall_count = 2
 support_offset = 1.8
 support_roof_height = =5*layer_height
 support_roof_line_width = 0.25
-support_use_towers = True
 support_xy_distance_overhang = 0.15
 
diff --git a/resources/quality/ultimaker_methodx/um_methodx_2xa_um-sr30-175_0.2mm.inst.cfg b/resources/quality/ultimaker_methodx/um_methodx_2xa_um-sr30-175_0.2mm.inst.cfg
@@ -36,9 +36,8 @@ support_conical_angle = 20
 support_conical_enabled = True
 support_conical_min_width = 20
 support_fan_enable = False
-support_interface_offset = 0
+support_interface_offset = 1
 support_interface_wall_count = 2
 support_offset = 0.8
 support_roof_height = =5*layer_height
-support_use_towers = True
 
diff --git a/resources/quality/ultimaker_methodx/um_methodx_labs_um-abscf-175_0.2mm.inst.cfg b/resources/quality/ultimaker_methodx/um_methodx_labs_um-abscf-175_0.2mm.inst.cfg
@@ -50,6 +50,7 @@ support_line_width = 0.35
 support_material_flow = 90
 support_roof_density = 82
 support_roof_line_width = 0.4
+support_use_towers = True
 support_xy_distance = 0.3
 support_xy_distance_overhang = 0.25
 support_z_distance = 0.15

diff --git a/resources/quality/ultimaker_methodx/um_methodx_labs_um-absr-175_0.2mm.inst.cfg b/resources/quality/ultimaker_methodx/um_methodx_labs_um-absr-175_0.2mm.inst.cfg
@@ -55,6 +55,7 @@ support_roof_density = 85
 support_roof_wall_count = 1
 support_supported_skin_fan_speed = 60.0
 support_top_distance = =support_z_distance
+support_use_towers = False
 support_xy_distance = 0.35
 support_xy_distance_overhang = 0.25
 support_xy_overrides_z = xy_overrides_z

diff --git a/resources/quality/ultimaker_methodx/um_methodx_labs_um-asa-175_0.2mm.inst.cfg b/resources/quality/ultimaker_methodx/um_methodx_labs_um-asa-175_0.2mm.inst.cfg
@@ -52,6 +52,7 @@ support_material_flow = =0.85*material_flow
 support_roof_density = 85
 support_supported_skin_fan_speed = 60.0
 support_top_distance = =support_z_distance
+support_use_towers = False
 support_xy_distance = 0.35
 support_xy_distance_overhang = 0.25
 support_xy_overrides_z = xy_overrides_z

diff --git a/resources/quality/ultimaker_methodx/um_methodx_labs_um-nylon12-cf-175_0.2mm.inst.cfg b/resources/quality/ultimaker_methodx/um_methodx_labs_um-nylon12-cf-175_0.2mm.inst.cfg
@@ -38,6 +38,7 @@ support_bottom_stair_step_height = 0
 support_infill_rate = 12.0
 support_line_width = =line_width * 0.75
 support_roof_density = 85
+support_use_towers = True
 support_xy_distance = 0.3
 support_z_distance = 0.25
 
diff --git a/resources/quality/ultimaker_methodxl/um_methodxl_1c_um-abscf-175_0.2mm.inst.cfg b/resources/quality/ultimaker_methodxl/um_methodxl_1c_um-abscf-175_0.2mm.inst.cfg
@@ -52,6 +52,7 @@ support_line_width = 0.35
 support_material_flow = 90
 support_roof_density = 82
 support_roof_line_width = 0.4
+support_use_towers = True
 support_xy_distance = 0.3
 support_xy_distance_overhang = 0.25
 support_z_distance = 0.15

diff --git a/resources/quality/ultimaker_methodxl/um_methodxl_1c_um-absr-175_0.2mm.inst.cfg b/resources/quality/ultimaker_methodxl/um_methodxl_1c_um-absr-175_0.2mm.inst.cfg
@@ -54,6 +54,7 @@ support_roof_density = 85
 support_roof_wall_count = 1
 support_supported_skin_fan_speed = 60.0
 support_top_distance = =support_z_distance
+support_use_towers = False
 support_xy_distance = 0.35
 support_xy_distance_overhang = 0.25
 support_xy_overrides_z = xy_overrides_z

diff --git a/resources/quality/ultimaker_methodxl/um_methodxl_1c_um-asa-175_0.2mm.inst.cfg b/resources/quality/ultimaker_methodxl/um_methodxl_1c_um-asa-175_0.2mm.inst.cfg
@@ -52,6 +52,7 @@ support_material_flow = =0.85*material_flow
 support_roof_density = 85
 support_supported_skin_fan_speed = 60.0
 support_top_distance = =support_z_distance
+support_use_towers = False
 support_xy_distance = 0.35
 support_xy_distance_overhang = 0.25
 support_xy_overrides_z = xy_overrides_z

diff --git a/resources/quality/ultimaker_methodxl/um_methodxl_1c_um-nylon12-cf-175_0.2mm.inst.cfg b/resources/quality/ultimaker_methodxl/um_methodxl_1c_um-nylon12-cf-175_0.2mm.inst.cfg
@@ -38,6 +38,7 @@ support_bottom_stair_step_height = 0
 support_infill_rate = 12.0
 support_line_width = =line_width * 0.75
 support_roof_density = 85
+support_use_towers = True
 support_xy_distance = 0.3
 support_z_distance = 0.25
 
diff --git a/resources/quality/ultimaker_methodxl/um_methodxl_1xa_um-absr-175_0.2mm.inst.cfg b/resources/quality/ultimaker_methodxl/um_methodxl_1xa_um-absr-175_0.2mm.inst.cfg
@@ -54,6 +54,7 @@ support_roof_density = 85
 support_roof_wall_count = 1
 support_supported_skin_fan_speed = 60.0
 support_top_distance = =support_z_distance
+support_use_towers = False
 support_xy_distance = 0.35
 support_xy_distance_overhang = 0.25
 support_xy_overrides_z = xy_overrides_z

diff --git a/resources/quality/ultimaker_methodxl/um_methodxl_1xa_um-asa-175_0.2mm.inst.cfg b/resources/quality/ultimaker_methodxl/um_methodxl_1xa_um-asa-175_0.2mm.inst.cfg
@@ -52,6 +52,7 @@ support_material_flow = =0.85*material_flow
 support_roof_density = 85
 support_supported_skin_fan_speed = 60.0
 support_top_distance = =support_z_distance
+support_use_towers = False
 support_xy_distance = 0.35
 support_xy_distance_overhang = 0.25
 support_xy_overrides_z = xy_overrides_z

diff --git a/resources/quality/ultimaker_methodxl/um_methodxl_2a_um-pva-175_0.2mm.inst.cfg b/resources/quality/ultimaker_methodxl/um_methodxl_2a_um-pva-175_0.2mm.inst.cfg
@@ -56,14 +56,14 @@ support_conical_min_width = 20
 support_fan_enable = False
 support_infill_density_multiplier_initial_layer = 2
 support_infill_rate = 12
-support_interface_offset = 0
+support_interface_offset = 1
 support_interface_wall_count = 2
 support_offset = 1.8
 support_pattern = grid
 support_roof_density = 95
 support_roof_height = =layer_height*8
-support_roof_line_width = 0.4
-support_use_towers = True
+support_roof_line_width = 0.25
+support_top_distance = 0.4
 switch_extruder_extra_prime_amount = 1
 switch_extruder_retraction_amount = 2.5
 switch_extruder_retraction_speeds = 3

diff --git a/resources/quality/ultimaker_methodxl/um_methodxl_2xa_um-rapidrinse-175_0.2mm.inst.cfg b/resources/quality/ultimaker_methodxl/um_methodxl_2xa_um-rapidrinse-175_0.2mm.inst.cfg
@@ -32,11 +32,10 @@ support_conical_angle = 20
 support_conical_enabled = True
 support_conical_min_width = 20
 support_fan_enable = False
-support_interface_offset = 0
+support_interface_offset = 1
 support_interface_wall_count = 2
 support_offset = 1.8
 support_roof_height = =5*layer_height
 support_roof_line_width = 0.25
-support_use_towers = True
 support_xy_distance_overhang = 0.15
 
diff --git a/resources/quality/ultimaker_methodxl/um_methodxl_2xa_um-sr30-175_0.2mm.inst.cfg b/resources/quality/ultimaker_methodxl/um_methodxl_2xa_um-sr30-175_0.2mm.inst.cfg
@@ -36,9 +36,8 @@ support_conical_angle = 20
 support_conical_enabled = True
 support_conical_min_width = 20
 support_fan_enable = False
-support_interface_offset = 0
+support_interface_offset = 1
 support_interface_wall_count = 2
 support_offset = 0.8
 support_roof_height = =5*layer_height
-support_use_towers = True
 
diff --git a/resources/quality/ultimaker_methodxl/um_methodxl_labs_um-abscf-175_0.2mm.inst.cfg b/resources/quality/ultimaker_methodxl/um_methodxl_labs_um-abscf-175_0.2mm.inst.cfg
@@ -52,6 +52,7 @@ support_line_width = 0.35
 support_material_flow = 90
 support_roof_density = 82
 support_roof_line_width = 0.4
+support_use_towers = True
 support_xy_distance = 0.3
 support_xy_distance_overhang = 0.25
 support_z_distance = 0.15

diff --git a/resources/quality/ultimaker_methodxl/um_methodxl_labs_um-absr-175_0.2mm.inst.cfg b/resources/quality/ultimaker_methodxl/um_methodxl_labs_um-absr-175_0.2mm.inst.cfg
@@ -54,6 +54,7 @@ support_roof_density = 85
 support_roof_wall_count = 1
 support_supported_skin_fan_speed = 60.0
 support_top_distance = =support_z_distance
+support_use_towers = False
 support_xy_distance = 0.35
 support_xy_distance_overhang = 0.25
 support_xy_overrides_z = xy_overrides_z

diff --git a/resources/quality/ultimaker_methodxl/um_methodxl_labs_um-asa-175_0.2mm.inst.cfg b/resources/quality/ultimaker_methodxl/um_methodxl_labs_um-asa-175_0.2mm.inst.cfg
@@ -52,6 +52,7 @@ support_material_flow = =0.85*material_flow
 support_roof_density = 85
 support_supported_skin_fan_speed = 60.0
 support_top_distance = =support_z_distance
+support_use_towers = False
 support_xy_distance = 0.35
 support_xy_distance_overhang = 0.25
 support_xy_overrides_z = xy_overrides_z

diff --git a/resources/quality/ultimaker_methodxl/um_methodxl_labs_um-nylon12-cf-175_0.2mm.inst.cfg b/resources/quality/ultimaker_methodxl/um_methodxl_labs_um-nylon12-cf-175_0.2mm.inst.cfg
@@ -38,6 +38,7 @@ support_bottom_stair_step_height = 0
 support_infill_rate = 12.0
 support_line_width = =line_width * 0.75
 support_roof_density = 85
+support_use_towers = True
 support_xy_distance = 0.3
 support_z_distance = 0.25
 
diff --git a/resources/quality/ultimaker_s3/um_s3_aa0.25_um-abs_0.1mm.inst.cfg b/resources/quality/ultimaker_s3/um_s3_aa0.25_um-abs_0.1mm.inst.cfg
@@ -68,5 +68,7 @@ support_top_distance = =support_z_distance
 support_z_distance = 0.3
 top_bottom_thickness = =max(1.2 , layer_height * 6)
 wall_0_wipe_dist = 0.8
+z_seam_relative = True
+z_seam_type = back
 zig_zaggify_infill = True
 
diff --git a/resources/quality/ultimaker_s3/um_s3_aa0.25_um-petg_0.1mm.inst.cfg b/resources/quality/ultimaker_s3/um_s3_aa0.25_um-petg_0.1mm.inst.cfg
@@ -66,5 +66,7 @@ support_top_distance = =support_z_distance
 support_z_distance = 0.3
 top_bottom_thickness = =max(1.2 , layer_height * 6)
 wall_0_wipe_dist = 0.8
+z_seam_relative = True
+z_seam_type = back
 zig_zaggify_infill = True
 
diff --git a/resources/quality/ultimaker_s3/um_s3_aa0.25_um-pla_0.1mm.inst.cfg b/resources/quality/ultimaker_s3/um_s3_aa0.25_um-pla_0.1mm.inst.cfg
@@ -66,5 +66,7 @@ support_top_distance = =support_z_distance
 support_z_distance = 0.3
 top_bottom_thickness = =max(1 , layer_height * 5)
 wall_0_wipe_dist = 0.8
+z_seam_relative = True
+z_seam_type = back
 zig_zaggify_infill = True
 
diff --git a/resources/quality/ultimaker_s3/um_s3_aa0.25_um-tough-pla_0.1mm.inst.cfg b/resources/quality/ultimaker_s3/um_s3_aa0.25_um-tough-pla_0.1mm.inst.cfg
@@ -67,5 +67,7 @@ support_top_distance = =support_z_distance
 support_z_distance = 0.3
 top_bottom_thickness = =max(1 , layer_height * 5)
 wall_0_wipe_dist = 0.8
+z_seam_relative = True
+z_seam_type = back
 zig_zaggify_infill = True
 
diff --git a/resources/quality/ultimaker_s3/um_s3_aa0.4_um-abs_0.06mm.inst.cfg b/resources/quality/ultimaker_s3/um_s3_aa0.4_um-abs_0.06mm.inst.cfg
@@ -68,5 +68,7 @@ support_top_distance = =support_z_distance
 support_z_distance = 0.3
 top_bottom_thickness = =max(1.2 , layer_height * 6)
 wall_0_wipe_dist = 0.8
+z_seam_relative = True
+z_seam_type = back
 zig_zaggify_infill = True
 
diff --git a/resources/quality/ultimaker_s3/um_s3_aa0.4_um-abs_0.15mm.inst.cfg b/resources/quality/ultimaker_s3/um_s3_aa0.4_um-abs_0.15mm.inst.cfg
@@ -69,5 +69,7 @@ support_top_distance = =support_z_distance
 support_z_distance = 0.3
 top_bottom_thickness = =max(1.2 , layer_height * 6)
 wall_0_wipe_dist = 0.8
+z_seam_relative = True
+z_seam_type = back
 zig_zaggify_infill = True
 
diff --git a/resources/quality/ultimaker_s3/um_s3_aa0.4_um-abs_0.1mm.inst.cfg b/resources/quality/ultimaker_s3/um_s3_aa0.4_um-abs_0.1mm.inst.cfg
@@ -68,5 +68,7 @@ support_top_distance = =support_z_distance
 support_z_distance = 0.3
 top_bottom_thickness = =max(1.2 , layer_height * 6)
 wall_0_wipe_dist = 0.8
+z_seam_relative = True
+z_seam_type = back
 zig_zaggify_infill = True
 
diff --git a/resources/quality/ultimaker_s3/um_s3_aa0.4_um-abs_0.2mm.inst.cfg b/resources/quality/ultimaker_s3/um_s3_aa0.4_um-abs_0.2mm.inst.cfg
@@ -74,5 +74,7 @@ top_bottom_thickness = =max(1.2 , layer_height * 6)
 wall_0_wipe_dist = 0.8
 wall_x_material_flow = =1.05 * wall_material_flow
 wall_x_material_flow_roofing = =wall_material_flow
+z_seam_relative = True
+z_seam_type = back
 zig_zaggify_infill = True
 
diff --git a/resources/quality/ultimaker_s3/um_s3_aa0.4_um-abs_0.3mm.inst.cfg b/resources/quality/ultimaker_s3/um_s3_aa0.4_um-abs_0.3mm.inst.cfg
@@ -71,5 +71,7 @@ support_z_distance = 0.4
 top_bottom_thickness = =max(1.2 , layer_height * 6)
 wall_0_wipe_dist = 0.8
 wall_line_width_0 = =line_width * (1 + magic_spiralize * 0.25)
+z_seam_relative = True
+z_seam_type = back
 zig_zaggify_infill = True
 
diff --git a/resources/quality/ultimaker_s3/um_s3_aa0.4_um-petg_0.06mm.inst.cfg b/resources/quality/ultimaker_s3/um_s3_aa0.4_um-petg_0.06mm.inst.cfg
@@ -67,5 +67,7 @@ support_top_distance = =support_z_distance
 support_z_distance = 0.3
 top_bottom_thickness = =max(1.2 , layer_height * 6)
 wall_0_wipe_dist = 0.8
+z_seam_relative = True
+z_seam_type = back
 zig_zaggify_infill = True
 
diff --git a/resources/quality/ultimaker_s3/um_s3_aa0.4_um-petg_0.15mm.inst.cfg b/resources/quality/ultimaker_s3/um_s3_aa0.4_um-petg_0.15mm.inst.cfg
@@ -68,5 +68,7 @@ support_top_distance = =support_z_distance
 support_z_distance = 0.3
 top_bottom_thickness = =max(1.2 , layer_height * 6)
 wall_0_wipe_dist = 0.8
+z_seam_relative = True
+z_seam_type = back
 zig_zaggify_infill = True