Skip to content

UltiMaker Cura 5.7.0-beta.1

Pre-release
Pre-release
Compare
Choose a tag to compare
@saumyaj3 saumyaj3 released this 15 Mar 16:45
· 194 commits to 5.7 since this release
0fec7bd

New features and improvements

Universal Cura Project files

Universal Cura Project files contain models and settings and can be shared with people who have different printers. They can be used on any printer and they allow you to include positional data for the models on your build plate as well as select settings. Visit our Thingiverse page to download this amazing Dinosaur SD Card Holder to try the ease of sharing settings yourself.

1

Newly introduced Settings

  • Settings that define the raft offset for top, middle and bottom raft layers
  • Brim only on the inside setting, resolves #2853
  • Introduced a new Prime tower type: Interleaved, next to the current Normal, contributed by @wawanbreton
  • Apply Monotonic ordering to the Raft Top Surface
  • Raft Wall Line Count for the Bottom, Middle, and Top of the raft
  • Allowing to define print sequence manually, contributed by @alexandr-vladimirov

image

image

MethodX and MethodXL specific improvements

For the best experience with your MethodX and MethodXL please update to 5.7.1

  • Enabled Print over Cloud for UltiMaker MethodX and Method XL printers
  • Introduced ASA, SR30, and Nylon12-CF profiles for MethodX and Method XL Printers. The latest firmware version that supports these materials is available here.
  • Improved the predicted printing time so it's closer to the actual printing time on the MethodX and MethodXL
  • Improved the idle nozzle temperature for dual extrusion printing on MethodX and MethodXL
  • Resolved a crash for the Method printer when navigating to the Monitor tab
  • Improved the way that the fanspeeds were listed and controlled for MethodX and MethodXL printers
  • Updated Raft settings for UltiMaker MethodX and MethodXL
  • Enabled Monotonic Raft Surface to improve adhesion
  • Increased the Minimum Retract Distance to improve infill pattern wall overlaps

Other improvements

  • Introduced an analyzing tool in the cura engine to better track slicing crashes, and started fixing the biggest reports coming in.
  • The play speed of the nozzle in the preview is now closer to the movement of the printhead
  • Introduced an option to choose Drop Model to Buildplate every time a project file is loaded
  • Introduced DisplayInfoOnLCD Post Processing Script which combines DisplayFilenameAndLayerOnLCD with DisplayProgress, contributed by @GregValiant
  • Introduced alternative camera navigation similar to FreeCAD Trackpad, contributed by @quarnster

Bug fixes

  • Resolved significantly slower slicing for models with a lot of holes
  • A significant amount of crashes have been resolved that are caused by self intersecting polygons
  • Align to Buildplate did not work for grouped meshes, resolves #14237
  • The models in a 3mf file would not load in their saved position, please note that this also changes the behavior of the "import models" feature of a 3mf file, for this feature the saved model location will be ignored
  • Reduced the amount of floating support in areas near the support overhang angle threshold
  • Fixed a bug with the Initial Extruder Number in the start gcode, resolves #17501
  • Fixed a bug where Z could be negative if Remove Empty Layers was enabled, resolves #15975
  • Pressing the Esc key now doesn't exiting full screen mode, contributed by @Sophist-UK, resolves #7499
  • Improved the OAuth protocol to improve signing in with plug-ins, contributed by @wawanbreton
  • Fixed tree support-related crashes if there are no overhangs, contributed by @ThomasRahm
  • Fixed some slicing crashes with tree support, contributed by @ThomasRahm
  • Fixed available height when adding modifier mesh in One at a Time printing, contributed by @fieldOfView resolves #16566
  • Improved behavior for loading 3mfs by giving the models original names, contributed by @pietchaki, resolves #12089
  • Added an error so LimitXYAccelJerk doesn't run unless Accel Control is enabled in Cura, contributed by @GregValiant
  • Some helpful code cleanup contributed by @dmitrygribenchuk

Profiles and materials:

  • Introduced high-speed profiles for the layer heights <0.15mm for Ultimaker PLA, T-PLA, ABS and PETG.
  • Updated Initial Layer Speed settings for UltiMaker S3, and UltiMaker S5
  • Updated the Shrinkage Factor for PET CF to improve dimensional accuracy
  • Improved self-support settings for UltiMaker Materials
  • Renamed UltiMaker PP Transparent to UltiMaker PP Natural
  • Increased part strengths of high-speed modes by compensating for slip in high flow rates
  • Improved adhesion settings for UltiMaker ABS

New and updated printers

  • Introduced Elegoo Neptune 4 Plus and Max, and updated Elegoo Neptune 4 and Pro, contributed by @mastercaution, @BremerButjer, @gsthnz, @ArthurREGNARD, @NovaScotianNorse, @ToasterUwU, @CharlKlein, @si0ls, @AlbeDarned @fuji97 and @Ev1dentFir3
  • Introduced Anycubic Kobra 2 Printer Definition contributed by @ThatGuyZim
  • Introduced Flying Bear Ghost 6, contributed by @Barrnet
  • Introduced Creality Ender 3 V2 Neo, contributed by @Hougaard22
  • Introduced Dagoma Sigma Pro 500z, and Dagoma Sigma Pro 500z Dual, contributed by @0r31
  • Introduced RRatRig V-Core 3, 200mm, 300mm, 400mm, 500mm and RatRig V-Minion, contributed by @Nu-hin
  • Introduced Flashforge Adventurer 3 (AD3 / AD3C / AD3 Lite / AD3 Pro) & Adventurer AD4, and AD4 Lite , contributed by @Jeremie-C
  • Updated the dimensions for Ender 3 V3 S, contributed by @mcuprojects
  • Updated start Gcode for creality_ender3v3se & Anycubic Kobra Go/Kobra 2, contributed by @zanghao912
  • Updated print and retraction settings for Sovol 3D printers, contributed by @Asterchades
  • Updated Creality Ender 5 Plus Bed Leveling Command, contributed by @dsnsgithub
  • Updated Voron definition to support Voron/Klipper, contributed by @NerdyGriffin