Hardware buy

[vergoossen]

Hi,

Is there a place where to buy ready to install hardware?

[serrj-sv]

EDIT: Guys, I'm very sorry to say that I'm done with orders. To the people whom I promised here and didn't sent: I'm also canceling these orders.

[vergoossen]

I want to buy both please. Im in EU :)
Can you send me an e-mail to stef [at] [myusername] .nl please?

[b]Edit a i'm dutch too :)[/b]

[serrj-sv]

I already assembled and sold both adapters to @vergoossen. I have to order components then, it may take 2-3 weeks to arrive. If you're willing to wait I can proceed with ordering but I will need a pre-payment first.

…

On Sat, 6 Feb 2021, 07:40 Alex Diehr ***@***.***> wrote: I would be very happy to get one. How could we arrange? I bought more components that I need (for spare) so, if you are in EU, I can assemble and ship for 25EUR + shipping costs. This is how it looks like, I can assemble 2 more: [image: image] <https://user-images.githubusercontent.com/51411734/105992564-94f6ba80-60a5-11eb-9e9b-d6c667216302.png> [image: image] <https://user-images.githubusercontent.com/51411734/105994162-92956000-60a7-11eb-8dc4-cbf33fac7a18.png> [image: image] <https://user-images.githubusercontent.com/51411734/105992922-f9b21500-60a5-11eb-841b-c77189cd87db.png> [image: image] <https://user-images.githubusercontent.com/51411734/105992707-bc4d8780-60a5-11eb-9e06-616602c0ddec.png> [image: image] <https://user-images.githubusercontent.com/51411734/105992858-e56e1800-60a5-11eb-92f6-26c13be9e89e.png> — You are receiving this because you commented. Reply to this email directly, view it on GitHub <#51 (comment)>, or unsubscribe <https://github.com/notifications/unsubscribe-auth/AMIHWFSCWZSVKTAF3TY47FDS5TP6LANCNFSM4UUZ2TFQ> .

[serrj-sv]

That should be fine as my skills might be a bit lacking.

Ok, I already placed an order for new components since I received another request. But due to Chinese new year there may be a delay. I will let you know once components arrived and device assembled

[th3sniper86]

@serrj-sv if you have some more spare time and spare parts. I'd also be happy to receive two ;)

[serrj-sv]

yes,I ordered more parts. I put you on the list ))

…

On Thu, 18 Feb 2021, 12:10 th3sniper86 ***@***.***> wrote: @serrj-sv <https://github.com/serrj-sv> if you have some more spare time and spare parts. I'd also be happy to receive two ;) — You are receiving this because you were mentioned. Reply to this email directly, view it on GitHub <#51 (comment)>, or unsubscribe <https://github.com/notifications/unsubscribe-auth/AMIHWFWLPKJBR2ZJVS6OXNTS7TYQRANCNFSM4UUZ2TFQ> .

[deku-m]

@serrj-sv
Do you still have 2 more?
Also a question did you try tasmota software aswel?

[drdoener]

Hi all,
could anybody tell me which tye of connector has to be used to plug it on the board of the MHI-AC?
There are so many types of JST connectors, I already bought a wrong one.
Thanks !
Michael

[serrj-sv]

I use this one (choose 5P version) https://a.aliexpress.com/_uJNE1f

…

On Sat, 27 Feb 2021, 20:02 drdoener ***@***.***> wrote: Hi all, could anybody tell me which tye of connector has to be used to plug it on the board of the MHI-AC? There are so many types of JST connectors, I already bought a wrong one. Thanks ! Michael — You are receiving this because you were mentioned. Reply to this email directly, view it on GitHub <#51 (comment)>, or unsubscribe <https://github.com/notifications/unsubscribe-auth/AMIHWFSRDTP434SDDGKHEW3TBE6TLANCNFSM4UUZ2TFQ> .

[drdoener]

Thanks.
I ordered this one/this type (on another shop within EU).

Greets

[absalom-muc]

@serrj-sv
Also a question did you try tasmota software aswel?

You could have a look on this issue

[deku-m]

Yes i did. Sorry i was just curious if someone did try.

@serrj-sv
Do you perhaps still sell those adapters, i would like to buy 2 if possible..?
Im also located in Netherlands btw.

[serrj-sv]

Guys, I'm very sorry to say that I'm done with orders. To the people whom I promised here and didn't sent: I'm also canceling these orders.

[koelkast88]

Today I got all parts for soldering a few adaptors, I have parts for 4 in total. If you are interested, contact me.

[th3sniper86]

@absalom-muc What type of condensator did you use for C2 and C3? Tantalum?

[absalom-muc]

@absalom-muc What type of condensator did you use for C2 and C3? Tantalum?

simple ceramic, no Tantalum

[deku-m]

@koelkast88

Today I got all parts for soldering a few adaptors, I have parts for 4 in total. If you are interested, contact me.

How can i contact you? im interested in 2 adaptors :)

[arpiecodes]

@koelkast88 I'd also be interested in two adapters, if they are still available. :)

[koelkast88]

@deku-m and @synegic contact me at fokke[at]neefjes.info , I have still parts for 4 adaptors.

[DYLaKo]

If someone in the Netherlands is still looking for these adapters, I have some for sale, in DIY and complete soldered version, see:
https://gathering.tweakers.net/forum/list_messages/2065058

[th3sniper86]

I also have 1 module available for sale.
Plug & Play (please provide your wifi credentials and mqtt broker IP). Tested in my unit.
Easy accessible after installation because of the cable connection.

€30,- (total, including shipping approx. : €34 (NL))

[buennerbernd]

I would buy it. buennerbernd-github@yahoo.com

[swa72]

I'm too looking for the assembled device (actually I need two). I can cover the software side and reflash the device if necessary but hardware is beyond my skill ;-) @DYLaKo link is dead.

[DYLaKo]

I'm too looking for the assembled device (actually I need two). I can cover the software side and reflash the device if necessary but hardware is beyond my skill ;-) @DYLaKo link is dead.

Just tested the link, it is still working. I still have some units available.

[swa72]

My fault. I misinterpreted the error message as 404ish - I probably didn't authenticate. Anyway, would you ship to Germany? I'm interested in two units (the premium option with no soldering, please ;-)). Best, Stefan

[DYLaKo]

My fault. I misinterpreted the error message as 404ish - I probably didn't authenticate. Anyway, would you ship to Germany? I'm interested in two units (the premium option with no soldering, please ;-)). Best, Stefan

I need to check for the shipping cost to Germany, I can do that tomorrow and let you know. How can I contact you? Do you have an email address?

[swa72]

Posted my mail at https://gathering.tweakers.net/forum/list_messages/2065058 (which is a little more private than github).

[DYLaKo]

Posted my mail at https://gathering.tweakers.net/forum/list_messages/2065058 (which is a little more private than github).

Found it. You should have an email now.

[DYLaKo]

@jenshorn I just send you an email. You can remove your email address from your post above.

[RobertJansen1]

i have 2 of these units available for purchase, if someone needs it: https://tweakers.net/aanbod/2835762/mitsubishi-ac-wifi-controller.html

[Kurisutian]

Anyone has some pre-assembled devices left over willing to sell? I'm located in Germany. Somehow 1 out of the 2 devices I build did die and I need a new one. Died just like that (AC could not be turned on while it was attached but turned on when I detached it) and I would like to replace it. Don't need the Wemos as this works fine. Don't know why it stopped working just like that... So I'm out of boards and parts and looking for a quicker way to get my hands on at least one of them. Maybe I'm just bad in soldering... 🙈

[oliv3r]

Anyone has some pre-assembled devices left over willing to sell? I'm located in Germany. Somehow 1 out of the 2 devices I build did die and I need a new one. Died just like that (AC could not be turned on while it was attached but turned on when I detached it) and I would like to replace it. Don't need the Wemos as this works fine. Don't know why it stopped working just like that... So I'm out of boards and parts and looking for a quicker way to get my hands on at least one of them. Maybe I'm just bad in soldering... 🙈

I've heard some talk that the 'level shifter' we use isn't really a level shifter at all; it works most of the time, but it's not an SPI level shifter, those are dedicated chips. I've just finish a new kicad design which actually uses a proper level shifter, and some other goodies. I'll be posting a MR soon!

[deku-m]

Anyone has some pre-assembled devices left over willing to sell? I'm located in Germany. Somehow 1 out of the 2 devices I build did die and I need a new one. Died just like that (AC could not be turned on while it was attached but turned on when I detached it) and I would like to replace it. Don't need the Wemos as this works fine. Don't know why it stopped working just like that... So I'm out of boards and parts and looking for a quicker way to get my hands on at least one of them. Maybe I'm just bad in soldering... 🙈

I've heard some talk that the 'level shifter' we use isn't really a level shifter at all; it works most of the time, but it's not an SPI level shifter, those are dedicated chips. I've just finish a new kicad design which actually uses a proper level shifter, and some other goodies. I'll be posting a MR soon!

Maybe its smart and it is also what you mean perhaps that you create the full package (components) that can be produced by jlcpcb for example as PCB assembly.

[Kurisutian]

Anyone has some pre-assembled devices left over willing to sell? I'm located in Germany. Somehow 1 out of the 2 devices I build did die and I need a new one. Died just like that (AC could not be turned on while it was attached but turned on when I detached it) and I would like to replace it. Don't need the Wemos as this works fine. Don't know why it stopped working just like that... So I'm out of boards and parts and looking for a quicker way to get my hands on at least one of them. Maybe I'm just bad in soldering... 🙈

I've heard some talk that the 'level shifter' we use isn't really a level shifter at all; it works most of the time, but it's not an SPI level shifter, those are dedicated chips. I've just finish a new kicad design which actually uses a proper level shifter, and some other goodies. I'll be posting a MR soon!

Seems to be matching the observed behavior I have here. I did replace the soldered board with another one and at first, the unit was dead. So I kept it in there since it was already late and wanted to get back to it a couple if days later. And all over sudden the unit was online and the controller working after 2 or 3 days later. So this would, to my understanding, fit to the "work most of the time" part.

[oliv3r]

#181

I can't actually push the files yet, as we need LFS support (which I can drop of course as well). I've added some goodies and my repo which does work in the MR :)

And yes, it should be JLCPCB assembly service compatible, though I've not tried that yet.

[EvoSems]

Hi looking for 2 complete plug and play boards please with the cable so I can mount outside (I don't want to disassemble to get access) Australia. thanks

also just want to confirm I can just flash with [MHI-AC-Ctrl-ESPHome] easier for me?

[oliv3r]

@EvoSems how do you expect to plugin the cables without disassembly?

[EvoSems]

@EvoSems how do you expect to plugin the cables without disassembly?

I only want to run the cable to the outside once. Then can detach reattach as I see fit by just opening the lid flap.

Sorry it probably didn’t come across correctly. Like an extension cable. Plug in once on the board and re assemble once. Then access to the connection is from under the flap.

[oliv3r]

@EvoSems how do you expect to plugin the cables without disassembly?

I only want to run the cable to the outside once. Then can detach reattach as I see fit by just opening the lid flap.

Sorry it probably didn’t come across correctly. Like an extension cable. Plug in once on the board and re assemble once. Then access to the connection is from under the flap.

Right, well you can always get one of these: https://www.ebay.com/p/1160173035 (there's cheaper ones too), wouldn't that solve your problem?

[EvoSems]

@EvoSems how do you expect to plugin the cables without disassembly?

I only want to run the cable to the outside once. Then can detach reattach as I see fit by just opening the lid flap.
Sorry it probably didn’t come across correctly. Like an extension cable. Plug in once on the board and re assemble once. Then access to the connection is from under the flap.

Right, well you can always get one of these: https://www.ebay.com/p/1160173035 (there's cheaper ones too), wouldn't that solve your problem?

Yes. Perfect. Just what is needed! I had ordered a few other cables from lots of research of different sites. But they turned up too small. Which I learnt now is due to the cn105 interface. This is still a new subject to me. Learning along the way.

this seems the most reliable solution.
I took readings of the cns port today. So can confirm the voltages. Some guides I followed were leading me to think I just needed an esp and 4 wires. Just reading tx rx. But they are outdated.

I have just had 2 new mhi units installed. So mhi is totally new to me. But I also want the perfect smart home. : )
I would normally look into building this all myself. But at this stage of my life with kids and a hectic job. I’m happy to just buy a plug and play solution

[aaronactive]

Based in Sydney, Australia here - having successfully assembled and installed 2x units, I have parts leftover for 3x units which I am happy to ship at cost, or assemble for some reasonable compensation. Let me know.

I’m in Melbourne - interested let me know what your after, just need parts no assembly @addinsella

[ThomasHFWright]

What's the latest on turnkey PCB designs like this one? #70
Did anyone test that or one like it?
I'd like to just order the PCB premade from jlcpcb if possible to Portugal.

[frankyman88]

Based in Sydney, Australia here - having successfully assembled and installed 2x units, I have parts leftover for 3x units which I am happy to ship at cost, or assemble for some reasonable compensation. Let me know.

I’m in Melbourne - interested let me know what your after, just need parts no assembly @addinsella

Drop me a message Andrew(dot)addinsell(at)gmail(dot)com

Sent you an email @addinsella , cheers!

[M-ax-G]

I have one assembled and parts for four more.
Can sell parts or assembled.
Ship to Australia only.
Parts/assembled 30 AUD plus shipping.
2024-09-24 all sold; nothing left :)

[darkenbula]

Hi M-ax-G , i'd be interested in 2 assembled units posted to VIC

[M-ax-G]

Apologies for the delayed reply... feel free to send me an email to @gmail.com with mxgrnkwtz in front of it.

[riccardo92]

I'm in the Netherlands and have around 10-15 PCBs left over (jcpcb). I'm happy to ship them at cost price + shipping. Assembly with Traco 2450 or Traco 2450e and legit Wemos D1 mini is also possible (again, all at cost price + shipping).

Will be tested with own unit, obviously.

[Kurisutian]

I'm in the Netherlands and have around 10-15 PCBs left over (jcpcb). I'm happy to ship them at cost price + shipping. Assembly with Traco 2450 or Traco 2450e and legit Wemos D1 mini is also possible (again, all at cost price + shipping).

Will be tested with own unit, obviously.

@riccardo92 Would you ship to Germany and do you happen to know how much shipping here would be? Currently looking for some.

[riccardo92]

Willing to ship to Germany, yeah. Quick check gives me around €8,40 for a mailbox package using the national post service. I think a letter/bubble envelope would be too risky, but also possible (probably around €5).

[Kurisutian]

Willing to ship to Germany, yeah. Quick check gives me around €8,40 for a mailbox package using the national post service. I think a letter/bubble envelope would be too risky, but also possible (probably around €5).

Didn't fully get off they are completely assembled or is I'd have to order other parts for the board as well to finish it? Got some Wemos D1 left but none of the other parts, which is why I'm asking. What's the difference between the 2450 and the 2450e? I had some assembled but they all started falling after a while except one. I suspect some faulty batch but couldn't figure out what it was so I'm starting over 😅

[riccardo92]

Willing to ship to Germany, yeah. Quick check gives me around €8,40 for a mailbox package using the national post service. I think a letter/bubble envelope would be too risky, but also possible (probably around €5).

Didn't fully get off they are completely assembled or is I'd have to order other parts for the board as well to finish it? Got some Wemos D1 left but none of the other parts, which is why I'm asking. What's the difference between the 2450 and the 2450e? I had some assembled but they all started falling after a while except one. I suspect some faulty batch but couldn't figure out what it was so I'm starting over 😅

I can ship the pcbs only, pcbs with parts or assembled pcbs, it's up to you. If you have the Wemos already, then I wont ship those.

I have not been using them very long yet, not sure how reliable they are. Still better than MHI's worthless app in any case.

The difference between 2450 and 2450e is explained somewhere in docs or issues, but it's mainly that the e version is less efficient (92% vs 96%) so it might run a bit hotter. It's also a bit cheaper.

[Kurisutian]

Willing to ship to Germany, yeah. Quick check gives me around €8,40 for a mailbox package using the national post service. I think a letter/bubble envelope would be too risky, but also possible (probably around €5).

Didn't fully get off they are completely assembled or is I'd have to order other parts for the board as well to finish it? Got some Wemos D1 left but none of the other parts, which is why I'm asking. What's the difference between the 2450 and the 2450e? I had some assembled but they all started falling after a while except one. I suspect some faulty batch but couldn't figure out what it was so I'm starting over 😅

I can ship the pcbs only, pcbs with parts or assembled pcbs, it's up to you. If you have the Wemos already, then I wont ship those.

I have not been using them very long yet, not sure how reliable they are. Still better than MHI's worthless app in any case.

The difference between 2450 and 2450e is explained somewhere in docs or issues, but it's mainly that the e version is less efficient (92% vs 96%) so it might run a bit hotter. It's also a bit cheaper.

Sounds great. I would love to have the assembled ones as I do not find much time these days to solder anything. Wemos is already programmed to the AC it needs to installed for. If the 2450e runs hotter I would guess the 2450 would be the better way to go. Still intend to install the external DS18x20 to it. Works good on the second unit. Since you have more than one how much would 5 assembled ones cost (I intend to add some more units to the house in the future) including shipping? Feel free to write me at k1r1sutojan(at)gmail.com (replace 1 with i). Thanks 😃

[OnlyRobin]

Willing to ship to Germany, yeah. Quick check gives me around €8,40 for a mailbox package using the national post service. I think a letter/bubble envelope would be too risky, but also possible (probably around €5).

Didn't fully get off they are completely assembled or is I'd have to order other parts for the board as well to finish it? Got some Wemos D1 left but none of the other parts, which is why I'm asking. What's the difference between the 2450 and the 2450e? I had some assembled but they all started falling after a while except one. I suspect some faulty batch but couldn't figure out what it was so I'm starting over 😅

I can ship the pcbs only, pcbs with parts or assembled pcbs, it's up to you. If you have the Wemos already, then I wont ship those.

I have not been using them very long yet, not sure how reliable they are. Still better than MHI's worthless app in any case.

The difference between 2450 and 2450e is explained somewhere in docs or issues, but it's mainly that the e version is less efficient (92% vs 96%) so it might run a bit hotter. It's also a bit cheaper.

Hi @riccardo92,

Is it possible you can send me a assembled one? If you have one left.
So i can check what i did wrong with the one i did because i cant get it connected to a pc to flash. when i connect it i see 1 led blinks 1 time and thats it, no sound on my pc or a device, i installed the correct drivers.

Im living in the netherlands.
Please let me know.

[riccardo92]

Willing to ship to Germany, yeah. Quick check gives me around €8,40 for a mailbox package using the national post service. I think a letter/bubble envelope would be too risky, but also possible (probably around €5).

Didn't fully get off they are completely assembled or is I'd have to order other parts for the board as well to finish it? Got some Wemos D1 left but none of the other parts, which is why I'm asking. What's the difference between the 2450 and the 2450e? I had some assembled but they all started falling after a while except one. I suspect some faulty batch but couldn't figure out what it was so I'm starting over 😅

I can ship the pcbs only, pcbs with parts or assembled pcbs, it's up to you. If you have the Wemos already, then I wont ship those.
I have not been using them very long yet, not sure how reliable they are. Still better than MHI's worthless app in any case.
The difference between 2450 and 2450e is explained somewhere in docs or issues, but it's mainly that the e version is less efficient (92% vs 96%) so it might run a bit hotter. It's also a bit cheaper.

Hi @riccardo92,

Is it possible you can send me a assembled one? If you have one left. So i can check what i did wrong with the one i did because i cant get it connected to a pc to flash. when i connect it i see 1 led blinks 1 time and thats it, no sound on my pc or a device, i installed the correct drivers.

Im living in the netherlands. Please let me know.

The behavior you're describing sounds normal to me; at least the legit Lolin units flash their LEDs once upon connecting and a few times while uploading your code. Perhaps you haven't selected the right board in the Arduino IDE or you selected the wrong clock speed (ie 160MHz).

I don't have one already assembled, but I'm assembling a few anyway so I could do one extra. I'm just waiting for some TSR2450's, so it'll take a few days. Let me know if I should assemble an additional one.

[OnlyRobin]

Willing to ship to Germany, yeah. Quick check gives me around €8,40 for a mailbox package using the national post service. I think a letter/bubble envelope would be too risky, but also possible (probably around €5).

Didn't fully get off they are completely assembled or is I'd have to order other parts for the board as well to finish it? Got some Wemos D1 left but none of the other parts, which is why I'm asking. What's the difference between the 2450 and the 2450e? I had some assembled but they all started falling after a while except one. I suspect some faulty batch but couldn't figure out what it was so I'm starting over 😅

I can ship the pcbs only, pcbs with parts or assembled pcbs, it's up to you. If you have the Wemos already, then I wont ship those.
I have not been using them very long yet, not sure how reliable they are. Still better than MHI's worthless app in any case.
The difference between 2450 and 2450e is explained somewhere in docs or issues, but it's mainly that the e version is less efficient (92% vs 96%) so it might run a bit hotter. It's also a bit cheaper.

Hi @riccardo92,
Is it possible you can send me a assembled one? If you have one left. So i can check what i did wrong with the one i did because i cant get it connected to a pc to flash. when i connect it i see 1 led blinks 1 time and thats it, no sound on my pc or a device, i installed the correct drivers.
Im living in the netherlands. Please let me know.

The behavior you're describing sounds normal to me; at least the legit Lolin units flash their LEDs once upon connecting and a few times while uploading your code. Perhaps you haven't selected the right board in the Arduino IDE or you selected the wrong clock speed (ie 160MHz).

I don't have one already assembled, but I'm assembling a few anyway so I could do one extra. I'm just waiting for some TSR2450's, so it'll take a few days. Let me know if I should assemble an additional one.

Hi, i found what i did wrong. I had the wrong cabel. : ).
Now it works.
But if you dont mind to make 1 more.
Let me know the costs.

[riccardo92]

Willing to ship to Germany, yeah. Quick check gives me around €8,40 for a mailbox package using the national post service. I think a letter/bubble envelope would be too risky, but also possible (probably around €5).

Didn't fully get off they are completely assembled or is I'd have to order other parts for the board as well to finish it? Got some Wemos D1 left but none of the other parts, which is why I'm asking. What's the difference between the 2450 and the 2450e? I had some assembled but they all started falling after a while except one. I suspect some faulty batch but couldn't figure out what it was so I'm starting over 😅

I can ship the pcbs only, pcbs with parts or assembled pcbs, it's up to you. If you have the Wemos already, then I wont ship those.
I have not been using them very long yet, not sure how reliable they are. Still better than MHI's worthless app in any case.
The difference between 2450 and 2450e is explained somewhere in docs or issues, but it's mainly that the e version is less efficient (92% vs 96%) so it might run a bit hotter. It's also a bit cheaper.

Hi @riccardo92,
Is it possible you can send me a assembled one? If you have one left. So i can check what i did wrong with the one i did because i cant get it connected to a pc to flash. when i connect it i see 1 led blinks 1 time and thats it, no sound on my pc or a device, i installed the correct drivers.
Im living in the netherlands. Please let me know.

The behavior you're describing sounds normal to me; at least the legit Lolin units flash their LEDs once upon connecting and a few times while uploading your code. Perhaps you haven't selected the right board in the Arduino IDE or you selected the wrong clock speed (ie 160MHz).
I don't have one already assembled, but I'm assembling a few anyway so I could do one extra. I'm just waiting for some TSR2450's, so it'll take a few days. Let me know if I should assemble an additional one.

Hi, i found what i did wrong. I had the wrong cabel. : ). Now it works. But if you dont mind to make 1 more. Let me know the costs.

Good to hear that!

It'll be around €17,50 ex shipping and excluding the Wemos D1 mini. If you also need a Wemos, this adds another €7 (you can get it a bit cheaper, but I'm ordering it for a bit more to avoid additional shipping from another webshop). It's a bit expensive for one unit because of the Traco TSR 1 2450, that's already 8. It can be done a bit cheaper (approx €15) if you decide to use the TSR 1 2450e.

[OnlyRobin]

Willing to ship to Germany, yeah. Quick check gives me around €8,40 for a mailbox package using the national post service. I think a letter/bubble envelope would be too risky, but also possible (probably around €5).

Didn't fully get off they are completely assembled or is I'd have to order other parts for the board as well to finish it? Got some Wemos D1 left but none of the other parts, which is why I'm asking. What's the difference between the 2450 and the 2450e? I had some assembled but they all started falling after a while except one. I suspect some faulty batch but couldn't figure out what it was so I'm starting over 😅

I can ship the pcbs only, pcbs with parts or assembled pcbs, it's up to you. If you have the Wemos already, then I wont ship those.
I have not been using them very long yet, not sure how reliable they are. Still better than MHI's worthless app in any case.
The difference between 2450 and 2450e is explained somewhere in docs or issues, but it's mainly that the e version is less efficient (92% vs 96%) so it might run a bit hotter. It's also a bit cheaper.

Hi @riccardo92,
Is it possible you can send me a assembled one? If you have one left. So i can check what i did wrong with the one i did because i cant get it connected to a pc to flash. when i connect it i see 1 led blinks 1 time and thats it, no sound on my pc or a device, i installed the correct drivers.
Im living in the netherlands. Please let me know.

The behavior you're describing sounds normal to me; at least the legit Lolin units flash their LEDs once upon connecting and a few times while uploading your code. Perhaps you haven't selected the right board in the Arduino IDE or you selected the wrong clock speed (ie 160MHz).
I don't have one already assembled, but I'm assembling a few anyway so I could do one extra. I'm just waiting for some TSR2450's, so it'll take a few days. Let me know if I should assemble an additional one.

Hi, i found what i did wrong. I had the wrong cabel. : ). Now it works. But if you dont mind to make 1 more. Let me know the costs.

Good to hear that!

It'll be around €17,50 ex shipping and excluding the Wemos D1 mini. If you also need a Wemos, this adds another €7 (you can get it a bit cheaper, but I'm ordering it for a bit more to avoid additional shipping from another webshop). It's a bit expensive for one unit because of the Traco TSR 1 2450, that's already 8. It can be done a bit cheaper (approx €15) if you decide to use the TSR 1 2450e.

Ok im interested.
Let me know when you are finished with the assembling.

[riccardo92]

Willing to ship to Germany, yeah. Quick check gives me around €8,40 for a mailbox package using the national post service. I think a letter/bubble envelope would be too risky, but also possible (probably around €5).

Didn't fully get off they are completely assembled or is I'd have to order other parts for the board as well to finish it? Got some Wemos D1 left but none of the other parts, which is why I'm asking. What's the difference between the 2450 and the 2450e? I had some assembled but they all started falling after a while except one. I suspect some faulty batch but couldn't figure out what it was so I'm starting over 😅

I can ship the pcbs only, pcbs with parts or assembled pcbs, it's up to you. If you have the Wemos already, then I wont ship those.
I have not been using them very long yet, not sure how reliable they are. Still better than MHI's worthless app in any case.
The difference between 2450 and 2450e is explained somewhere in docs or issues, but it's mainly that the e version is less efficient (92% vs 96%) so it might run a bit hotter. It's also a bit cheaper.

Hi @riccardo92,
Is it possible you can send me a assembled one? If you have one left. So i can check what i did wrong with the one i did because i cant get it connected to a pc to flash. when i connect it i see 1 led blinks 1 time and thats it, no sound on my pc or a device, i installed the correct drivers.
Im living in the netherlands. Please let me know.

The behavior you're describing sounds normal to me; at least the legit Lolin units flash their LEDs once upon connecting and a few times while uploading your code. Perhaps you haven't selected the right board in the Arduino IDE or you selected the wrong clock speed (ie 160MHz).
I don't have one already assembled, but I'm assembling a few anyway so I could do one extra. I'm just waiting for some TSR2450's, so it'll take a few days. Let me know if I should assemble an additional one.

Hi, i found what i did wrong. I had the wrong cabel. : ). Now it works. But if you dont mind to make 1 more. Let me know the costs.

Good to hear that!
It'll be around €17,50 ex shipping and excluding the Wemos D1 mini. If you also need a Wemos, this adds another €7 (you can get it a bit cheaper, but I'm ordering it for a bit more to avoid additional shipping from another webshop). It's a bit expensive for one unit because of the Traco TSR 1 2450, that's already 8. It can be done a bit cheaper (approx €15) if you decide to use the TSR 1 2450e.

Ok im interested. Let me know when you are finished with the assembling.

Will do. It will be a bit more expensive since I need to place new orders for the logic converters and Traco 2450). Do you need the Wemos D1 as well, with soldered headers? Let me know asap.

[OnlyRobin]

Willing to ship to Germany, yeah. Quick check gives me around €8,40 for a mailbox package using the national post service. I think a letter/bubble envelope would be too risky, but also possible (probably around €5).

Didn't fully get off they are completely assembled or is I'd have to order other parts for the board as well to finish it? Got some Wemos D1 left but none of the other parts, which is why I'm asking. What's the difference between the 2450 and the 2450e? I had some assembled but they all started falling after a while except one. I suspect some faulty batch but couldn't figure out what it was so I'm starting over 😅

I can ship the pcbs only, pcbs with parts or assembled pcbs, it's up to you. If you have the Wemos already, then I wont ship those.
I have not been using them very long yet, not sure how reliable they are. Still better than MHI's worthless app in any case.
The difference between 2450 and 2450e is explained somewhere in docs or issues, but it's mainly that the e version is less efficient (92% vs 96%) so it might run a bit hotter. It's also a bit cheaper.

Hi @riccardo92,
Is it possible you can send me a assembled one? If you have one left. So i can check what i did wrong with the one i did because i cant get it connected to a pc to flash. when i connect it i see 1 led blinks 1 time and thats it, no sound on my pc or a device, i installed the correct drivers.
Im living in the netherlands. Please let me know.

The behavior you're describing sounds normal to me; at least the legit Lolin units flash their LEDs once upon connecting and a few times while uploading your code. Perhaps you haven't selected the right board in the Arduino IDE or you selected the wrong clock speed (ie 160MHz).
I don't have one already assembled, but I'm assembling a few anyway so I could do one extra. I'm just waiting for some TSR2450's, so it'll take a few days. Let me know if I should assemble an additional one.

Hi, i found what i did wrong. I had the wrong cabel. : ). Now it works. But if you dont mind to make 1 more. Let me know the costs.

Good to hear that!
It'll be around €17,50 ex shipping and excluding the Wemos D1 mini. If you also need a Wemos, this adds another €7 (you can get it a bit cheaper, but I'm ordering it for a bit more to avoid additional shipping from another webshop). It's a bit expensive for one unit because of the Traco TSR 1 2450, that's already 8. It can be done a bit cheaper (approx €15) if you decide to use the TSR 1 2450e.

Ok im interested. Let me know when you are finished with the assembling.

Will do. It will be a bit more expensive since I need to place new orders for the logic converters and Traco 2450). Do you need the Wemos D1 as well, with soldered headers? Let me know asap.

Ok and Yes

[warfuric]

I'm also looking for some boards, preferably assembled or with components in Australia - if anyone has any spare to sell or would be able to provide guidance on where they sourced their parts. Happy to purchase international and deal with postage costs as well.

I'm looking for 3 to 5 boards.

Cheers.
Thanks, have this sorted now.