Skip to content

Modular Relayer that works with multiple AMBs & Generalised Incentives

License

Notifications You must be signed in to change notification settings

ajimeno04/generalised-relayer-tests

 
 

Repository files navigation

Generalised Relayer

The Generalised Relayer is built to act as a relayer for Arbitrary Message Bridges (AMBs) using the Generalised Incentives scheme.

The goal for the Generalised Relayer is 2 fold:

  1. Acts as a reference implementation of a relayer that understands Generalised Incentives.
  2. Lower the barrier to entry resulting in greater competition which will improve relaying speed, robustness, and resistance to censorship.

Currently, the Relayer supports the following AMBs:

  • Wormhole
  • LayerZero

It also supports a 'Mock' AMB implementation that operates with signed messages (see the Generalised Incentives repository for more information).

Dependencies

Aside from the npm packages specified within package.json, the Generalised Relayer relies on the following dependencies:

  • Redis

ℹ️ There is no need to manually install/run any dependencies when running the Relayer with Docker.

Relayer Configuration

The Relayer configuration is split into 2 distinct files.

⚠️ The Relayer will not run without the following configuration files.

1. Main configuration .yaml file

Most of the Relayer configuration is specified within a .yaml file located at the project's root directory. The configuration file must be named using the config.{$NODE_ENV}.yaml format according to the environment variable NODE_ENV of the runtime (e.g. on a production machine where NODE_ENV=production, the configuration file must be named config.production.yaml).

The NODE_ENV variable should ideally be set on the shell configuration file (i.e. .bashrc or equivalent), but may also be set by prepending it to the launch command, e.g. NODE_ENV=production docker compose up. For more information see the Node documentation.

The .yaml configuration file is divided into the following sections:

  • global: Defines the global relayer configuration.
    • The privateKey of the account that will submit the relay transactions on all chains must be defined at this point.
    • Default configuration for the monitor, getter, pricing, evaluator, submitter and wallet can also be specified at this point.
  • ambs: The AMBs configuration.
    • Every AMB configuration must have at least the address of the Generalised Incentives contract that implements the AMB (incentivesAddress) at this point, or otherwise within the chain-specific AMB configuration (under chains -> $ambName -> incentivesAddress).
  • chains: Defines the configuration for each of the chains to be supported by the relayer.
    • This includes the chainId and the rpc to be used for the chain.
    • Each chain may override the global monitor, getter, pricing, evaluator, submitter and wallet configurations (those defined under the global configuration), and amb configurations.

ℹ️ For a full reference of the configuration file, see config.example.yaml.

2. Environment variables .env file

Ports and docker specific configuration is set on a .env file within the project's root directory. This includes the COMPOSE_PROFILES environment variable which defines the docker services to enable (e.g. to enable the docker-compose.yaml services tagged with the wormhole profile set COMPOSE_PROFILES=wormhole).

ℹ️ See .env.example for the required environment variables.

Running the relayer

Option A: Using Docker

The simplest way to run the relayer is via docker compose (refer to the Docker documentation for installation instructions). Run the Relayer with:

docker compose up [-d]

The -d option detaches the process to the background.

Option B: Manual operation

Install the required dependencies with:

pnpm install
  • NOTE: The devDependencies are required to build the project. If running on a production machine where NODE_ENV=production, use pnpm install --prod=false

Initiate a Redis database with:

docker container run -p 6379:6379 redis
  • This command sets 6379 as the port for Redis communication. Make sure this port is correctly set on the .env configuration file.

Build and start the Relayer with:

pnpm start

For further insight into the requirements for running the Relayer see the docker-compose.yaml file.

Relayer Structure

The Relayer is devided into 6 main services: Monitor, Getter, Evaluator, Collector, Submitter and Wallet. These services work together to get the GeneralisedIncentives message bounties, evaluate their value, collect the message proofs, and submit them on the destination chain. The services are run in parallel and communicate using Redis. Wherever it makes sense, chains are allocated seperate workers to ensure a chain fault doesn't propagate and impact the performance on other chains.

Monitor

The Monitor service keeps track of the latest block information for each supported chain by polling the RPCs at the configured intervals. Other services may listen for the block changes that are observed by this Monitor service (this is mainly done by the Getter service). Additionally, external services may subscribe to the observed block changes via a websocket connection as exposed on the Monitor controller.

Getter

The Getter service is responsible for fetching on-chain bounties and messages. It works by searching for relevant EVM events triggered by the GeneralisedIncentives contract:

  • BountyPlaced: Signals that a message has been sent and contains the associated relaying incentives.
  • MessageDelivered: Signals that a message has been relayed from the source chain to the destination chain (event published on the destination chain).
  • BountyClaimed: Signals that a message has been relayed from the destination chain to the source chain, and the bounty has been distributed.
  • BountyIncreased: Signals that the associated relaying incentive has been updated.

The incentive information gathered with these events is sent to the common Redis database for later use by the other services.

Evaluator

The Evaluator service determines the profitability of delivering/acking a message using a provided gas estimation for the transaction in question together with the Bounty information gathered by the Getter. It is used by the Submitter to dettermine whether to relay a message or not, and can be used by external services via exposed API endopints defined on the Evaluator controller.

Collector

The Collector service collects the information to relay the cross-chain messages directly from the various AMB's, as for example the AMB's proofs. Every proof collected is sent to the Submitter via Redis to request the relay of the packet.

Submitter

The Submitter service gets packets that need relaying from Redis. For every packet received, the submitter:

  1. Gets the associated bounty information (i.e. the relaying incentive) from Redis.
  2. Simulates the transaction to get a gas estimate.
  3. Evaluates whether the relaying bounty covers the gas cost of the packet submission by querying the Evaluator service.
  4. Request the packet submission if the evaluation is successful using the processPacket method of the IncentivizedMessageEscrow contract via the Wallet service.

To make the Submitter as resilitent as possible to RPC failures/connection errors, each evaluation and submission step is tried up to maxTries times with a retryInterval delay between tries (these default to 3 and 2000 ms, but can be modified on the Relayer config).

The Submitter additionally limits the maximum number of transactions within the 'submission' pipeline (i.e. transactions that have been started to be processed and are not completed), and will not accept any further relay orders once reached.

Wallet

The Wallet service is used to submit transactions requested by the other services of the Relayer (only the Submitter at the time of writing). For every transaction request:

  1. The transaction fee values are dynamically determined according to the following configuration:

    EIP-1559 transactions

    • The maxFeePerGas configuration sets the transaction maxFeePerGas property. This defines the maximum fee to be paid per gas for a transaction (including both the base fee and the miner fee). If not set, no maxFeePerGas is set on the transaction.
    • The maxPriorityFeeAdjustmentFactor determines the amount by which to modify the queried recommended maxPriorityFee from the rpc. If not set, no maxPriorityFee is set on the transaction.
    • The maxAllowedPriorityFeePerGas sets the maximum value that maxPriorityFee may be set to (after applying the maxPriorityFeeAdjustmentFactor).

    Legacy transaction

    • The gasPriceAdjustmentFactor determines the amount by which to modify the queried recommended gasPrice from the rpc. If not set, no gasPrice is set on the transaction.
    • The maxAllowedGasPrice sets the maximum value that gasPrice may be set to (after applying the gasPriceAdjustmentFactor).

    ⚠️ If the above gas configurations are not specified, the transactions will be submitted using the ethers/rpc defaults.

  2. The transaction is submitted.

  3. The transaction confirmation is awaited.

  4. If the transaction fails to be mined after a configurable time interval, the transaction is repriced.

    • If a transaction does not mine in time (maxTries * (confirmationTimeout + retryInterval) approximately), the Relayer will attempt to reprice the transaction by resubmitting the transaction with higher gas price values. The gas prices are adjusted according to the priorityAdjustmentFactor configuration. If not set, it defaults to 1.1 (i.e +10%).
  5. If the transaction still fails to be mined, the wallet will attempt at cancelling the transaction.

    ⚠️ If the Wallet fails to cancel a transaction, the Submitter pipeline will stall and no further orders will be processed until the stuck transaction is resolved.

Further features

Pricing

A Pricing Service is implemented to be able to determine the value of gas/tokens handled by the Relayer. This service is mainly used by the Evaluator service to determine the profitability of relays, but can also be queried by external services using the exposed API endpoints specified on the Pricing controller.

The Relayer includes 2 pricing providers:

  • fixed: Can be used to specify a 'fixed' value for each token.
  • coin-gecko: Provides real-time pricing information for each token. Using this provider requires the additional gasCoinId configuration to be specified (see the provided config.example.yaml file).

The base Pricing controller provided includes price caching at a configurable cacheDuration interval (set to 0 to disable caching).

ℹ️ Further custom pricing providers can be implemented following the example of the existing providers.

Resolvers

To take into consideration the different behaviours and characteristics of different chains, a custom Resolvers can be specified for each chain. At the time of writing, the Resolvers can:

  • Map the rpc block number to the one observed by the transactions itself (for chains like Arbitrum).
  • Estimate gas parameters for transactions, including estimating the gas usage as observed by the transactions (for chains like Arbitrum) and additional L1 fees (for op-stack chains).

ℹ️ Resolvers have to be specified on the configuration file for each desired chain. See src/resolvers for the available resolvers.

Low balance warning

The Relayer keeps an estimate of the Relayer account gas balance for each chain. A warning is emitted to the logs if the gas balance falls below a configurable threshold lowBalanceWarning (in Wei).

The Store library

The distinct services of the Relayer communicate with each other using a Redis database. To abstract the Redis implementation away, a helper library, store.lib.ts, is provided.

Integration with other services

The Relayer makes available a getAMBs endpoint with which an external service may query the AMB messages corresponding to a transaction hash.

Persister

The Persister service can be enabled to save the information gathered by the Relayer to a persistent PostgreSQL database.

Development

Adding an AMB

In order to add support for a new AMB, a new service folder under collector/ named after the AMB must be added, within which the service file, also named after the AMB, must define the service that collects the AMB proofs. The collector service must send the collected AMB data to Redis using the submitProof helper of the store/store.lib.ts library.

⚠️ The Collector service must not block the main event loop in any manner (e.g. make use of worker threads). See the Mock collector implementation for further reference.

The AMB configuration must be added to the .yaml configuration file under the AMB name. This configuration will be automatically passed to the service once it is instantiated by the main Collector controller (see here).

It is recommended to update the docker-compose.yaml file with any image/service that is required by the AMB to have a completely standalone implementation when running the Relayer with Docker.

ℹ️ It is also recommended to add a new Docker Compose profile for any image/service added to the docker-compose.yaml file so that it can be disabled at the user's will.

ℹ️ Update config.example.yaml with the new AMB details for future reference.

Using the Mock implementation

The mock implementation is proof-of-authentication (PoA) scheme which works well for developing and testing. To use it, deploy a Mock Generalised Incentive implementation using a known key. Then set the key in the Mock AMB config and run the Relayer.

Typechain Types

The Relayer uses ethers types for the contracts that it interacts with (e.g. the Generalised Incentives contract). These types are generated with the typechain package using the contract abis (under the abis/ folder) upon installation of the npm packages. If the contract abis change the types must be regenerated (see the postinstall script on package.json).

About

Modular Relayer that works with multiple AMBs & Generalised Incentives

Resources

License

Stars

Watchers

Forks

Packages

No packages published

Languages

  • TypeScript 99.8%
  • JavaScript 0.2%