Skip to content

cake-lab/2023-ectf-tools

 
 

Folders and files

NameName
Last commit message
Last commit date

Latest commit

 

History

10 Commits
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 

Repository files navigation

2023 MITRE eCTF Tools: Protected Automotive Remote Entry Device (PARED)

This repository contains tools to run MITRE's 2023 Embedded System CTF (eCTF) design - see https://ectf.mitre.org/ for details.

Nothing in this repository should be modified in your design.

Environment Setup

Required Software

  • Git
  • Docker
  • Python
  • Stellaris ICDI Drivers
  • UNIFLASH

Recommended Software

  • Visual Studio Code
    • Python, C/C++, Cortex-Debug Extensions
  • OpenOCD
  • ARM GNU Toolchain

Required Software

The following sections detail how to install the required software for this competition.

Package Managers

It is important to note that some of these requirements can be installed via a package manager, and some of the install pages actually recommend it. A package manager is like an Appstore for your computer that runs on the commandline.

NOTE: Package managers are not required and these tools can be installed through other means. Skip ahead if you wish to use other methods.

Using a package manager can make the install process easier.

To find the proper package name you can just search <package manager> <software name> install in your web browser.

But first you need to install the proper package manager.

Windows: Chocolatey

Chocolatey is a package manager that can be installed on Windows. It has packages for most of the software you will need for eCTF.

https://docs.chocolatey.org/en-us/choco/setup

Mac: Homebrew

Homebrew is a preferred package manager for MacOS devices. It has install candidates for most of the software. It is even the prefered install method for some of the packages such as git.

https://brew.sh/

Ubuntu: apt

Linux, uses package managers by default. APT, or a different package manager, should already be installed on your system.

https://manpages.ubuntu.com/manpages/trusty/en/man8/apt.8.html

Git

Git is an open-source version control system. It will allow your team to collaborate on a single code base while managing a history of all the changes you make.

Git is required to submit your design for testing and progression to the Attack Phase. This makes it easy for the organizers to download your code for testing and allows your team to tag a specific version of your code you want to submit.

All Platforms https://git-scm.com/downloads

Docker

Docker is a lightweight containerization system. It allows you to package all your tools with the software required to run them.

Docker is used in the eCTF to create an environment for your host tools to execute in. This allows teams to use different programming languages, tools, or libraries during the Design Phase without requiring other teams to download additional software to use their design. Instead, each team will deliver a Dockerfile that builds an image capable of running all their tools.

All Platforms https://docs.docker.com/get-docker/

Python

Python is a highly readable language with substantial support, which makes it easy to get started with powerful development capability. Setting up a Python virtual environment makes it easy to handle dependencies. Python is used in the eCTF tools repository we provide, as well as our reference design example. The reference design requires Python 3.7 or above.

All Platforms There are many methods to install python on your system

Stellaris ICDI Drivers

The development board we will use for this competition is the Texas Instruments TM4C123G LaunchPad Evaluation Kit. You can find a lot of helpful resources on the product page at https://www.ti.com/tool/EK-TM4C123GXL.

The board has an integrated In-Circuit Debug Interface (ICDI). This is what is used to support programming and debugging of the hardware. To use it you need to install the correct drivers.

All Platforms https://www.ti.com/tool/STELLARIS_ICDI_DRIVERS

UNIFLASH

To program the flash memory on the development board, you need to download a programmer. UNIFLASH is compatible with Windows, MacOS, and Linux. There is also an LMFLASHPROGRAMMER, but it has export restrictions and is only compatible with Windows.

All Platforms https://www.ti.com/tool/UNIFLASH

Recommended Software

The following sections detail how to install the recommended software for this competition.

ARM GNU Toolchain

Our custom build process for the embedded software that will be loaded onto the TI board will run in a Docker container. Therefore, it is not necessary to install a compiler on your local machine. However, it may be helpful to have if you want to do any local builds of your code or debug any build issues. A popular cross-compilation toolchain for ARM is the GNU Toolchain.

All Platforms https://developer.arm.com/downloads/-/arm-gnu-toolchain-downloads

Open OCD

Open On-Chip Debugger (OpenOCD) is an open-source tool that supports debugging through a JTAG interface on many development boards. OpenOCD can be used with the Cortex-Debug extension in Visual Studio Code to provide an interactive debugging environment for the Texas Instrument development board we will use.

All Platforms https://openocd.org/pages/getting-openocd.html

Usage Open OCD can be used with gdb (arm-none-eabi-gdb from the ARM GNU Toolchain) or it can be used with the Cortex-Debug extension in Visual Studio Code (instructions in following section). To use Open OCD without Visual Studio Code, do the following:

  1. In a terminal, start Open OCD with openocd -f interface/ti-icdi.cfg -f board/ti_ek-tm4c123gxl.cfg.
  2. In another terminal, start GDB with arm-none-eabi-gdb <elf file path> -ex "target extended-remote localhost:3333"

Visual Studio Code

While there are many good IDEs, we recommend using Visual Studio Code (VSCode) because of its support for in-IDE debugging through the Cortex-Debug extension. Additionally, it is easier to setup than other IDEs we have used.

All Platforms https://code.visualstudio.com/download

Extensions

Extensions can be added to Visual Studio Code to add features that make it feel more like an IDE than a text editor. There are three extensions that we recommend.

  • Python
  • C/C++
  • Cortex-Debug

All Platforms https://code.visualstudio.com/docs/editor/extension-marketplace

Cortex-Debug

To configure Visual Studio Code with the Cortex-Debug extension and OpenOCD, you will need to create a launch configuration in Visual Studio Code that tells the extension information about your debug session such as the source code location, the path to your OpenOCD executable, and the board configuration files for OpenOCD to use.

In your design repository, an example debug launch configuration could look like this:

{
    "version": "0.2.0",
    "configurations": [
        {
            "name": "Cortex Debug",
            "cwd": "${workspaceFolder}",
            "executable": "${workspaceRoot}/path/to/application.elf",
            "armToolchainPath": "/path/to/arm-none-eabi/bin",
            "request": "launch",
            "type": "cortex-debug",
            "runToEntryPoint": "main",
            "servertype": "openocd",
            "device": "TM4C123GH6PM",
            "configFiles": [
                "interface/ti-icdi.cfg",
                "board/ti_ek-tm4c123gxl.cfg"
            ],
            "svdFile": "${workspaceRoot}/debug/TM4C123GH6PM.svd"
        }
    ]
}

eCTF Tools Setup

Once you have Git, Docker, and python3 installed, you need to clone this tools repo and install it as a python package. We recommend using a python virtual environment when installing packages for this competition. With your virtual environment activated, run the following:

git clone <Copy of this repo URL>
python3 -m pip install -e <path to cloned repo>

You must also clone the insecure example repository.

Hardware Setup

To prepare your hardware for the eCTF competition, you will need to install a bootloader (written by the organizers) on the development boards. Additionally, for the design to function the boards need to be connected over a shared UART interface.

Custom Bootloader

Using UNIFLASH, you should load the bootloader found in this repository (bootloader/bootloader.bin) onto the Tiva development boards. The version found here is used for the Design Phase, and will be used to load your designs onto the board. During the Attack Phase, a functionally equivalent version will be used to load other teams' designs.

UART

The two Tiva development boards needs to be connected over a shared UART interface. The boards should be connected as follows:

TM4C123G Pin TM4C123G Pin
GND GND
PB0 PB1
PB1 PB0

Using the eCTF Tools Repository

Getting Debug Information

When running any of the steps below, you can provide --debug between the ectf_tools and <phase>.<step> portions of the command. For example:

python3 -m ectf_tools --debug build.env --design <PATH_TO_DESIGN> --name <SYSTEM_NAME>

1. Build

There are four stages to the build process. Each stage produces a functional part of the system, whether it be an execution environment, system-wide secrets, devices, or host tools.

1a. build.env

python3 -m ectf_tools build.env --design <PATH_TO_DESIGN> --name <SYSTEM_NAME>

This builds a Docker image that will be used to create build and run environments for the system. Each subsequent step will be run in temporary containers, where all inputs are provided via read-only volumes, and outputs are stored on writable volumes. The environment build step will only be run once ever and the resulting image will be distributed to teams.

During development, you only need to change this whenever you need to change the environment (e.g., adding a package).

This step will build a docker container based on the Dockerfile in the design repo.

1b. build.tools

python3 -m ectf_tools build.tools --design <PATH_TO_DESIGN> --name <SYSTEM_NAME>

This step creates a volume containing host tools that will be used when running the system. You must pass the path to the design repo as an argument, and the eCTF tools will invoke your host tools makefile. In the insecure example, the host tools are simply copied to the output volume as they are implemented in python scripts and do not need to be compiled.

1c. build.depl

python3 -m ectf_tools build.depl --design <PATH_TO_DESIGN> --name <SYSTEM_NAME> --deployment <DEPLOYMENT_NAME>

This step generates system-wide secrets for a specific instance of the system (i.e., a deployment). The eCTF tools will invoke the design deployment Makefile, where secrets can be stored on a specific output volume.

1d. build.car_fob_pair

python3 -m ectf_tools build.car_fob_pair --design <PATH_TO_DESIGN> --name <SYSTEM_NAME> --deployment <DEPLOYMENT_NAME> --car-out <CAR_OUTPUT_FOLDER> --fob-out <FOB_OUTPUT_FOLDER> --car-name <CAR_BINARY_NAME> --fob-name <FOB_BINARY_NAME> --car-id <CAR_ID> --pair-pin <FOB_PAIR_PIN>

This step builds car and pre-paired fob binaries that can be loaded into the development boards. The eCTF tools will invoke the design device Makefile in the appropriate folder, which places the firmware binary and EEPROM contents in an output volume. This step also packages the firmware and EEPROM contents together so they can be loaded into the device.

1d. build.fob

python3 -m ectf_tools build.fob --design <PATH_TO_DESIGN> --name <SYSTEM_NAME> --deployment <DEPLOYMENT_NAME> --fob-out <FOB_OUTPUT_FOLDER> --fob-name <FOB_BINARY_NAME>

This step builds an unpaired fob binary that can be loaded into the development board. The eCTF tools will invoke the design device Makefile in the fob folder, which places the firmware binary and EEPROM contents in an output volume. This step also packages the firmware and EEPROM contents together so they can be loaded into the device.

2. Load and Launch Device

Follow these steps load binaries onto a device and open a connection for the host tools.

2a. device.load_hw

The load stage loads a packaged device binary+EEPROM into a target device. The build.car_fob_pair and build.fob steps must already have been run before running this step.

Plug a device with the bootloader installed into your computer, and hold down the right button while turning on the power. The device will slowly flash a cyan LED, indicating it is ready to install firmware. Figure out the serial port in your computer that the board is connected to (windows device manager or linux/mac dmesg), then start the device load step:

python3 -m ectf_tools device.load_hw --dev-in <DEVICE_ARTIFACTS_FOLDER> --dev-name <DEVICE_BINARY_NAME> --dev-serial <SERIAL_PORT>

When the install finishes, the cyan LED will be solid. Now, power cycle the device, and the LED should be solid green, showing that the firmware is running.

2b. device.bridge

python3 -m ectf_tools device.bridge --bridge-id <INET_SOCKET> --dev-serial <SERIAL_PORT>

The device bridge step launches a connection between a specific serial port (for a device) and an INET socket (for the host tools). This step will actively run in a terminal window, so you should open a separate window for this step. The bridge must be running for the host tools to interact with the device.

3. Run

3a. run.unlock

python3 -m ectf_tools run.unlock --name <SYSTEM_NAME> --car-bridge <CAR_SOCKET>

This run step invokes the unlock host tool, which connects to a car to receive messages over UART.

3b. run.pair

python3 -m ectf_tools run.pair --name <SYSTEM_NAME> --unpaired-fob-bridge <UNPAIRED_FOB_SOCKET> --paired-fob-bridge <PAIRED_FOB_SOCKET> --pair-pin <PAIR_PIN>

The run step invokes the pair host tool, which connects to a paired fob and an unpaired fob.

3c. run.package

python3 -m ectf_tools run.package --name <SYSTEM_NAME> --deployment <DEPLOYMENT_NAME> --package-out <PACKAGE_OUT> --package-name <PACKAGE_NAME> --car-id <CAR_ID> --feature-number <FEATURE_NUMBER>

This run step invokes the package host tool, which generates a package file with name package-name in the directory package-out. This step utilizes the inputs car-id and feature-number as well as shared secrets to generate a package.

3d. run.enable

python3 -m ectf_tools run.enable --name <SYSTEM_NAME> --fob-bridge <FOB_SOCKET> --package_in <PACKAGE_IN> --package_name <PACKAGE_NAME>

This run step invokes the enable host tool, which reads in a previously created feature package and enables that feature on the connected fob.

Additional Tips

Docker

To view all running Docker containers:

docker ps

To kill the Docker container with process ID 12345:

docker kill 12345

To kill all Docker containers:

docker kill $(docker ps -q)

You can streamline this by adding alias dockerka='docker kill $(docker ps -q)' to your .bashrc.

To run a command in the Docker container test:deployment:

docker run test:deployment echo "this echo command will be run in the container"

Docker can chew up disk space, so if you need to reclaim some, first clean up unused containers and volumes

docker container prune
docker volume prune

If that isn't enough, you can clean up all containers and volumes:

docker container prune -a
docker volume prune -a

NOTE: these will remove all of the cached containers, so the next builds may take a longer time

These are some helpful commands to have handy when managing your docker state:

  • Kill all docker containers: docker kill $(docker ps -q)
  • Kill the process in your window: CTRL-C
  • Suspend the process in your window: CTRL-Z
    • Note: Make sure to kill the process after!

udev Rules (Linux Only)

It is helpful to create custom udev rules for the Tiva boards used in the competition. This allows for static naming between board resets. These should be placed in: /etc/udev/rules.d/10-local.rules

ACTION=="add", ATTRS{idVendor}=="1cbe", ATTRS{idProduct}=="00fd", ATTRS{serial}=="0E2340C0", SYMLINK+="board_2"
ACTION=="add", ATTRS{idVendor}=="1cbe", ATTRS{idProduct}=="00fd", ATTRS{serial}=="0E235955", SYMLINK+="board_1"

The ATTRS{serial} should be replaced by your boards unique serial number. This can be found with udevadm info {/dev/tty{DEV_BOARD}} on Linux.

About

Support tools for the MITRE 2023 eCTF

Resources

License

Stars

Watchers

Forks

Releases

No releases published

Packages

No packages published

Languages

  • Python 100.0%