Bump github.com/ipld/go-ipld-prime from 0.7.0 to 0.9.0

[dependabot]

Bumps github.com/ipld/go-ipld-prime from 0.7.0 to 0.9.0.

Release notes

Sourced from github.com/ipld/go-ipld-prime's releases.

v0.9.0 is a pretty significant release, including several neat new convenience features, but most noticeably, significantly reworking how linking works.

Almost any code that deals with storing and linking data will need some adaptation to handle this release. We're sorry about the effort this may require, but it should be worth it. The new LinkSystem API should let us introduce a lot more convenience features in the future, and do so without pushing additional breakage out to downstream users; this is an investment in the future.

The bullet points below contain all the fun details.

Note that a v0.8.0 release version has been skipped. We use odd numbers to indicate the existence of significant changes; and while usually we try to tag an even-number release between each odd number release so that migrations can be smoothed out, in this case there simply weren't enough interesting points in between to be worth doing so.

• Change: linking has been significantly reworked, and now primarily works through the ipld.LinkSystem type.
  • This is cool, because it makes a lot of things less circuitous. Previously, working with links was a complicated combination of Loader and Storer functions, the Link interface contained the Load method, it was just... complicated to figure out where to start. Now, the answer is simple and constant: "Start with LinkSystem". Clearer to use; clearer to document; and also coincidentally a lot clearer to develop for, internally.
  • The PR can be found here: ipld/go-ipld-prime#143
  • Link.Load -> LinkSystem.Load (or, new: LinkSystem.Fill, which lets you control memory allocation more explicitly).
  • LinkBuilder.Build -> LinkSystem.Store.
  • LinkSystem.ComputeLink is a new feature that produces a Link without needing to store the data anywhere.
  • The ipld.Loader function is now most analogous to ipld.BlockReadOpener. You now put it into use by assigning it to a LinkLoader's StorageReadOpener field.
  • The ipld.Storer function is now most analogous to ipld.BlockWriteOpener. You now put it into use by assigning it to a LinkLoader's StorageWriteOpener field.
  • 99% of the time, you'll probably start with linking/cid.DefaultLinkSystem(). You can assign to fields of this to customize it further, but it'll get you started with multihashes and multicodecs and all the behavior you expect when working with CIDs.
    • (So, no -- the cidlink package hasn't gone anywhere. Hopefully it's a bit less obtrusive now, but it's still here.)
  • The traversal package's Config struct now uses a LinkSystem instead of a Loader and Storer pair, as you would now probably expect.
    • If you had code that was also previously passing around Loader and Storer, it's likely a similar pattern of change will be the right direction for that code.
  • In the future, further improvements will come from this: we're now much, much closer to making a bunch of transitive dependencies become optional (especially, various hashers, which currently, whenever you pull in the linking/cid package, come due to go-cid, and are quite large). When these improvements land (again, they're not in this release), you'll need to update your applications to import hashers you need if they're not in the golang standard library. For now: there's no change.
• Change: multicodec registration is now in the go-ipld-prime/multicodec package.
  • Previously, this registry was in the linking/cid package. These things are now better decoupled.
  • This will require packages which register codecs to make some very small updates: e.g. s/cidlink.RegisterMulticodecDecoder/multicodec.RegisterDecoder/, and correspondingly, update the package imports at the top of the file.
• New: some pre-made storage options (e.g. satisfying the ipld.StorageReadOpener and ipld.StorageWriteOpener function interfaces) have appeared! Find these in the go-ipld-prime/storage package.
  • Currently this only includes a simple in-memory storage option. This may be useful for testing and examples, but probably not much else :)
  • These are mostly intended to be illustrative. You should still expect to find better storage mechanisms in other repos.
• Change: some function names in codec packages are ever-so-slightly updated. (They're verbs now, instead of nouns, which makes sense because they're functions. I have no idea what I was thinking with the previous naming. Sorry.)
  • s/dagjson.Decoder/dagjson.Decode/g
  • s/dagjson.Decoder/dagjson.Encode/g
  • s/dagcbor.Decoder/dagcbor.Decode/g
  • s/dagcbor.Encoder/dagcbor.Encode/g
  • If you've only been using these indirectly, via their multicodec indicators, you won't have to update anything at all to account for this change.
• New: several new forms of helpers to make it syntactically easy to create new IPLD data trees with golang code!
  • Check out the go-ipld-prime/fluent/quip package! See ipld/go-ipld-prime#134, where it was introduced, for more details.
  • Check out the go-ipld-prime/fluent/qp package! See ipld/go-ipld-prime#138, where it was introduced, for more details.
  • Both of these offer variations on fluent which have much lower costs to use. (fluent incurs allocations during operation, which has a noticable impact on performance if used in a "hot" code path. Neither of these two new solutions do!)
  • For now, both quip and qp will be maintained. They have similar goals, but different syntaxes. If one is shown drastically more popular over time, we might begin to consider deprecating one in favor of the other, but we'll need lots of data before considering that.
  • We won't be removing the fluent package anytime soon, but we probably wouldn't recommend building new stuff on it. qp and quip are both drastically preferable for performance reasons.
• New: there is now an interface called ipld.ADL which can be used for a certain kind of feature detection.
  • This is an experimental new concept and likely subject to change.
  • The one key trait we've found all ADLs tend to share right now is that they have a "synthesized" view and "substrate" view of their data. So: the ipld.ADL interface states that a thing is an ipld.Node (for the synthesized view), and from it you should be able to access a Substrate() ipld.Node, and that's about it.

Changelog

Sourced from github.com/ipld/go-ipld-prime's changelog.

v0.9.0

2021 March 15

v0.9.0 is a pretty significant release, including several neat new convenience features, but most noticeably, significantly reworking how linking works.

Almost any code that deals with storing and linking data will need some adaptation to handle this release. We're sorry about the effort this may require, but it should be worth it. The new LinkSystem API should let us introduce a lot more convenience features in the future, and do so without pushing additional breakage out to downstream users; this is an investment in the future.

The bullet points below contain all the fun details.

Note that a v0.8.0 release version has been skipped. We use odd numbers to indicate the existence of significant changes; and while usually we try to tag an even-number release between each odd number release so that migrations can be smoothed out, in this case there simply weren't enough interesting points in between to be worth doing so.

• Change: linking has been significantly reworked, and now primarily works through the ipld.LinkSystem type.
  • This is cool, because it makes a lot of things less circuitous. Previously, working with links was a complicated combination of Loader and Storer functions, the Link interface contained the Load method, it was just... complicated to figure out where to start. Now, the answer is simple and constant: "Start with LinkSystem". Clearer to use; clearer to document; and also coincidentally a lot clearer to develop for, internally.
  • The PR can be found here: ipld/go-ipld-prime#143
  • Link.Load -> LinkSystem.Load (or, new: LinkSystem.Fill, which lets you control memory allocation more explicitly).
  • LinkBuilder.Build -> LinkSystem.Store.
  • LinkSystem.ComputeLink is a new feature that produces a Link without needing to store the data anywhere.
  • The ipld.Loader function is now most analogous to ipld.BlockReadOpener. You now put it into use by assigning it to a LinkLoader's StorageReadOpener field.
  • The ipld.Storer function is now most analogous to ipld.BlockWriteOpener. You now put it into use by assigning it to a LinkLoader's StorageWriteOpener field.
  • 99% of the time, you'll probably start with linking/cid.DefaultLinkSystem(). You can assign to fields of this to customize it further, but it'll get you started with multihashes and multicodecs and all the behavior you expect when working with CIDs.
    • (So, no -- the cidlink package hasn't gone anywhere. Hopefully it's a bit less obtrusive now, but it's still here.)
  • The traversal package's Config struct now uses a LinkSystem instead of a Loader and Storer pair, as you would now probably expect.
    • If you had code that was also previously passing around Loader and Storer, it's likely a similar pattern of change will be the right direction for that code.
  • In the future, further improvements will come from this: we're now much, much closer to making a bunch of transitive dependencies become optional (especially, various hashers, which currently, whenever you pull in the linking/cid package, come due to go-cid, and are quite large). When these improvements land (again, they're not in this release), you'll need to update your applications to import hashers you need if they're not in the golang standard library. For now: there's no change.
• Change: multicodec registration is now in the go-ipld-prime/multicodec package.
  • Previously, this registry was in the linking/cid package. These things are now better decoupled.
  • This will require packages which register codecs to make some very small updates: e.g. s/cidlink.RegisterMulticodecDecoder/multicodec.RegisterDecoder/, and correspondingly, update the package imports at the top of the file.
• New: some pre-made storage options (e.g. satisfying the ipld.StorageReadOpener and ipld.StorageWriteOpener function interfaces) have appeared! Find these in the go-ipld-prime/storage package.
  • Currently this only includes a simple in-memory storage option. This may be useful for testing and examples, but probably not much else :)
  • These are mostly intended to be illustrative. You should still expect to find better storage mechanisms in other repos.
• Change: some function names in codec packages are ever-so-slightly updated. (They're verbs now, instead of nouns, which makes sense because they're functions. I have no idea what I was thinking with the previous naming. Sorry.)
  • s/dagjson.Decoder/dagjson.Decode/g
  • s/dagjson.Decoder/dagjson.Encode/g
  • s/dagcbor.Decoder/dagcbor.Decode/g
  • s/dagcbor.Encoder/dagcbor.Encode/g
  • If you've only been using these indirectly, via their multicodec indicators, you won't have to update anything at all to account for this change.
• New: several new forms of helpers to make it syntactically easy to create new IPLD data trees with golang code!
  • Check out the go-ipld-prime/fluent/quip package! See ipld/go-ipld-prime#134, where it was introduced, for more details.
  • Check out the go-ipld-prime/fluent/qp package! See ipld/go-ipld-prime#138, where it was introduced, for more details.
  • Both of these offer variations on fluent which have much lower costs to use. (fluent incurs allocations during operation, which has a noticable impact on performance if used in a "hot" code path. Neither of these two new solutions do!)
  • For now, both quip and qp will be maintained. They have similar goals, but different syntaxes. If one is shown drastically more popular over time, we might begin to consider deprecating one in favor of the other, but we'll need lots of data before considering that.
  • We won't be removing the fluent package anytime soon, but we probably wouldn't recommend building new stuff on it. qp and quip are both drastically preferable for performance reasons.
• New: there is now an interface called ipld.ADL which can be used for a certain kind of feature detection.
  • This is an experimental new concept and likely subject to change.

... (truncated)

Commits

• a4e922a mark v0.9.0
• 7fc91fe Changelog: more backfill :)
• 00affde hackme: about merge strategies.
• a914710 Dropping .gopath and other unmaintained scripts.
• f6f7124 Merge pull request #143 from ipld/linksystem
• 8ef5eab Update changelog.
• d9d5682 Better document why some of the branches around direct byte slice access matt...
• 6386588 Update some comments regarding multihash.
• 8a7497f fix(codec/raw): update for linksystem
• 705307f Merge branch 'master' into linksystem
• Additional commits viewable in compare view

Dependabot will resolve any conflicts with this PR as long as you don't alter it yourself. You can also trigger a rebase manually by commenting @dependabot rebase.

---

Dependabot commands and options

You can trigger Dependabot actions by commenting on this PR:

• @dependabot rebase will rebase this PR
• @dependabot recreate will recreate this PR, overwriting any edits that have been made to it
• @dependabot merge will merge this PR after your CI passes on it
• @dependabot squash and merge will squash and merge this PR after your CI passes on it
• @dependabot cancel merge will cancel a previously requested merge and block automerging
• @dependabot reopen will reopen this PR if it is closed
• @dependabot close will close this PR and stop Dependabot recreating it. You can achieve the same result by closing it manually
• @dependabot ignore this major version will close this PR and stop Dependabot creating any more for this major version (unless you reopen the PR or upgrade to it yourself)
• @dependabot ignore this minor version will close this PR and stop Dependabot creating any more for this minor version (unless you reopen the PR or upgrade to it yourself)
• @dependabot ignore this dependency will close this PR and stop Dependabot creating any more for this dependency (unless you reopen the PR or upgrade to it yourself)

[dependabot]

Superseded by #218.