Skip to content

Emacs support for the Clojure(Script) programming language

Notifications You must be signed in to change notification settings

gessig/clojure-mode

 
 

Repository files navigation

License GPL 3 MELPA MELPA Stable travis

Clojure Mode

Provides Emacs font-lock, indentation, navigation and refactoring for the Clojure(Script) programming language.

This document assumes you're familiar with Emacs. More thorough walkthroughs, targeting Emacs beginners, are available at clojure-doc.org and Clojure for the Brave and the True. Keep in mind, however, that they might be out-of-date.

This documentation tracks the master branch of clojure-mode. Some of the features and settings discussed here might not be available in older releases (including the current stable release). Please, consult the relevant git tag (e.g. 5.1.0) if you need documentation for a specific clojure-mode release.


Installation

Available on the major package.el community maintained repos - MELPA Stable and MELPA repos.

MELPA Stable is the recommended repo as it has the latest stable version. MELPA has a development snapshot for users who don't mind (infrequent) breakage but don't want to run from a git checkout.

You can install clojure-mode using the following command:

M-x package-install [RET] clojure-mode [RET]

or if you'd rather keep it in your dotfiles:

(unless (package-installed-p 'clojure-mode)
  (package-install 'clojure-mode))

If the installation doesn't work try refreshing the package list:

M-x package-refresh-contents

Bundled major modes

The clojure-mode package actually bundles together several major modes:

  • clojure-mode is a major mode for editing Clojure code
  • clojurescript-mode is a major mode for editing ClojureScript code
  • clojurec-mode is a major mode for editing .cljc source files
  • clojurex-mode is a major mode for editing .cljx source files

All the major modes derive from clojure-mode and provide more or less the same functionality. Differences can be found mostly in the font-locking - e.g. ClojureScript has some built-in constructs that are not present in Clojure.

The proper major mode is selected automatically based on the extension of the file you're editing.

Having separate major modes gives you the flexibility to attach different hooks to them and to alter their behavior individually (e.g. add extra font-locking just to clojurescript-mode) .

Note that all modes derive from clojure-mode, so things you add to clojure-mode-hook and clojure-mode-map will affect all the derived modes as well.

Configuration

To see a list of available configuration options do M-x customize-group RET clojure.

Indentation options

The default indentation rules in clojure-mode are derived from the community Clojure Style Guide. Please, refer to the guide for the general Clojure indentation rules.

Indentation of function forms

The indentation of function forms is configured by the variable clojure-indent-style. It takes three possible values:

  • :always-align (the default)
(some-function
 10
 1
 2)
(some-function 10
               1
               2)
  • :always-indent
(some-function
  10
  1
  2)
(some-function 10
  1
  2)
  • :align-arguments
(some-function
  10
  1
  2)
(some-function 10
               1
               2)

Indentation of macro forms

The indentation of special forms and macros with bodies is controlled via put-clojure-indent, define-clojure-indent and clojure-backtracking-indent. Nearly all special forms and built-in macros with bodies have special indentation settings in clojure-mode. You can add/alter the indentation settings in your personal config. Let's assume you want to indent ->> and -> like this:

(->> something
  ala
  bala
  portokala)

You can do so by putting the following in your config:

(put-clojure-indent '-> 1)
(put-clojure-indent '->> 1)

This means that the body of the ->/->> is after the first argument.

A more compact way to do the same thing is:

(define-clojure-indent
  (-> 1)
  (->> 1))

You can also specify different indentation settings for symbols prefixed with some ns (or ns alias):

(put-clojure-indent 'do 0)
(put-clojure-indent 'my-ns/do 1)

The bodies of certain more complicated macros and special forms (e.g. letfn, deftype, extend-protocol, etc) are indented using a contextual backtracking indentation method, require more sophisticated indent specifications. Here are a few examples:

(define-clojure-indent
  (implement '(1 (1)))
  (letfn     '(1 ((:defn)) nil))
  (proxy     '(2 nil nil (1)))
  (reify     '(:defn (1)))
  (deftype   '(2 nil nil (1)))
  (defrecord '(2 nil nil (1)))
  (specify   '(1 (1)))
  (specify   '(1 (1))))

These follow the same rules as the :style/indent metadata specified by cider-nrepl. For instructions on how to write these specifications, see this document. The only difference is that you're allowed to use lists instead of vectors.

Vertical alignment

You can vertically align sexps with C-c SPC. For instance, typing this combo on the following form:

(def my-map
  {:a-key 1
   :other-key 2})

Leads to the following:

(def my-map
  {:a-key     1
   :other-key 2})

This can also be done automatically (as part of indentation) by turning on clojure-align-forms-automatically. This way it will happen whenever you select some code and hit TAB.

Refactoring support

The available refactorings were originally created and maintained by the clj-refactor.el team. The ones implemented in Elisp only are gradually migrated to clojure-mode.

Threading macros related features

  • Thread another expression.

Thread another form into the surrounding thread. Both ->> and -> variants are supported. See demonstration on the clj-refactor.el wiki.

  • Unwind a threaded expression.

Supports both ->> and ->. See demonstration on the clj-refactor.el wiki.

  • Wrap in thread first (->) and fully thread.

Introduce the thread first macro and rewrite the entire form. With a prefix argument do not thread the last form. See demonstration on the clj-refactor.el wiki.

  • Wrap in thread last (->>) and fully thread.

Introduce the thread last macro and rewrite the entire form. With a prefix argument do not thread the last form. See demonstration on the clj-refactor.el wiki.

  • Fully unwind a threaded expression.

Unwind and remove the threading macro. See demonstration on the clj-refactor.el wiki.

Cycling things

  • Cycle privacy

Cycle privacy of defs or defns. Use metadata explicitly with setting clojure-use-metadata-for-privacy to t for defns too. See demonstration on the clj-refactor.el wiki.

  • Cycle if/if-not

Find the closest if or if-not up the syntax tree and toggle it. Also transpose the "else" and "then" branches, keeping the semantics the same as before. See demonstration on the clj-refactor.el wiki.

Convert collection

Convert any given collection at point to list, quoted list, map, vector or set.

Related packages

  • clojure-mode-extra-font-locking provides additional font-locking for built-in methods and macros. The font-locking is pretty imprecise, because it doesn't take namespaces into account and it won't font-lock a function at all possible positions in a sexp, but if you don't mind its imperfections you can easily enable it:
(require 'clojure-mode-extra-font-locking)

The code in clojure-mode-font-locking used to be bundled with clojure-mode before version 3.0.

You can also use the code in this package as a basis for extending the font-locking further (e.g. functions/macros from more namespaces). Generally you should avoid adding special font-locking for things that don't have fairly unique names, as this will result in plenty of incorrect font-locking. CIDER users should avoid this package, as CIDER does its own dynamic font-locking, which is namespace-aware and doesn't produce almost any false positives.

  • clj-refactor provides refactoring support.

  • Enabling CamelCase support for editing commands(like forward-word, backward-word, etc) in clojure-mode is quite useful since we often have to deal with Java class and method names. The built-in Emacs minor mode subword-mode provides such functionality:

(add-hook 'clojure-mode-hook #'subword-mode)
  • The use of paredit when editing Clojure (or any other Lisp) code is highly recommended. It helps ensure the structure of your forms is not compromised and offers a number of operations that work on code structure at a higher level than just characters and words. To enable it for Clojure buffers:
(add-hook 'clojure-mode-hook #'paredit-mode)
  • smartparens is an excellent (newer) alternative to paredit. Many Clojure hackers have adopted it recently and you might want to give it a try as well. To enable smartparens use the following code:
(add-hook 'clojure-mode-hook #'smartparens-strict-mode)
  • RainbowDelimiters is a minor mode which highlights parentheses, brackets, and braces according to their depth. Each successive level is highlighted in a different color. This makes it easy to spot matching delimiters, orient yourself in the code, and tell which statements are at a given depth. Assuming you've already installed RainbowDelimiters you can enable it like this:
(add-hook 'clojure-mode-hook #'rainbow-delimiters-mode)
  • aggressive-indent-mode automatically adjust the indentation of your code, while you're writing it. Using it together with clojure-mode is highly recommended. Provided you've already installed aggressive-indent-mode you can enable it like this:
(add-hook 'clojure-mode-hook #'aggressive-indent-mode)

REPL Interaction

One of the fundamental aspects of Lisps in general and Clojure in particular is the notion of interactive programming - building your programs by continuously changing the state of the running Lisp program (as opposed to doing something more traditional like making a change and re-running the program afterwards to see the changes in action). To get the most of clojure-mode you'll have to combine it with some tool which will allow you to interact with your Clojure program (a.k.a. process/REPL).

A number of options exist for connecting to a running Clojure process and evaluating code interactively.

Basic REPL

Install inf-clojure for basic interaction with a REPL process.

CIDER

CIDER is a powerful Clojure interactive development environment, similar to SLIME for Common Lisp.

If you're into Clojure and Emacs you should definitely check it out.

Changelog

An extensive changelog is available here.

License

Copyright © 2007-2016 Jeffrey Chu, Lennart Staflin, Phil Hagelberg, Bozhidar Batsov, Artur Malabarba and contributors.

Distributed under the GNU General Public License; type C-h C-c to view it.

About

Emacs support for the Clojure(Script) programming language

Resources

Stars

Watchers

Forks

Packages

No packages published

Languages

  • Emacs Lisp 98.1%
  • Clojure 1.6%
  • Makefile 0.3%