WishLink-Lora RAK2247 (USB) 915Mhz The aim of this project is to help users set up a LoRa network easily. The User Guide can be get from our Web.
This project currently provides support for the below platforms.
- RAK2247(USB)
2020-07-15 V1.0
- 1.Some naming changes.
step1 : Initialize NPEX500 with display and keyboard.
- User: user
- Passwordr: user
- User: root
- Passwordr: techbase
step2 : Use "sudo raspi-config" command, enable i2c and SSH interface, disable login shell over serial and enable serial port hardware.
From here you can remotely configure using SSH
step3 : Clone the installer and start the installation.
$ sudo apt update; sudo apt install git -y
$ git clone https://github.com/jch889/RAK2247usb_Gateway_Rpi_mPCi.git ~/RAK2247usb_Gateway_Rpi_mPCi
$ chmod -R 755 RAK2247usb_Gateway_Rpi_mPCi
$ cd ~/RAK2247usb_Gateway_Rpi_mPCi
$ sudo ./install.sh
step4 : Wait a moment and the installation is complete.If your gateway uses a wired connection, please configure the region frequency using "sudo gateway-config" after the installation is complete.
step5 : For more other features, please use "sudo gateway-config".