Skip to content

logansmith6/programming-univbasics-3-labs-with-tdd-online-web-prework

 
 

Folders and files

NameName
Last commit message
Last commit date

Latest commit

 

History

15 Commits
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 

Repository files navigation

Test Driven Development with RSpec

Learning Goals

  • Explore the RSpec testing environment
  • Read and interpret tests
  • Practice declaring and using variables

Introduction

We've covered a lot of the basics of Ruby, but before we go further, its important that we talk a bit more about testing. As part of this course, you will encounter many lessons with tests that must be passed to register the lesson as complete. These are referred to as labs. You've already completed a few of them! All labs follow a similar format:

  • Work in the provided files, testing out potential solutions. In this lab, for instance, code will need to be written in calculator.rb to pass the tests
  • Run learn to print the tests at any point while you're writing your code
  • Read the error messages produced by running the tests
  • Write code that will resolve these error messages
  • Run learn again to check your progress
  • Repeat until all tests are passing
  • Run learn submit to submit your solution

As the lesson material becomes more complex, so do the tests. Getting acquainted with reading and interpreting tests will help you overcome some of the toughest labs ahead. In this lesson, we're going to walk through reading tests while also getting a little more practice with variables.

Building a Simple Calculator

Your task in this lab is to build a simple calculator. Using variables, this calculator will be able to take any two numbers and produce the result of their addition, subtraction, multiplication and division. The exact specifications we need to create this calculator are available to us... in the tests.

Test Driven Behaviors

When we want to run an experiment, we need to develop a hypothesis and we need to test it. In programming, we run tests to verify that programs behave the way we think they do. Tests help us identify bugs and judge how healthy our applications are.

We use tests to describe the program's behavior, just as you would in a professional coding environment, and we also use them as teaching tools. You are in charge of getting the tests to pass.

In Ruby, tests are handled by a tool called RSpec. RSpec is written in Ruby, but as we will see, has some custom functionality built in specifically for writing and running tests.

Directory Structure

The structure of this lab — where its files and folders are located — looks roughly like the following:

├── CONTRIBUTING.md
├── LICENSE.md
├── README.md
├── calculator.rb
└── spec
    └── calculator_spec.rb
    └── spec_helper.rb

All labs will more or less have the same structure. (And non-lab lessons, for that matter, will still have CONTRIBUTING.md, LICENSE.md, and README.md files.) In Ruby, all labs will have a spec folder that contains our tests.

Code Along

Open up calculator.rb in your text editor. If you're using the Learn IDE, click the blue "Open IDE" button in the top right hand corner of the lesson. If you open up that intro-to-ruby-programming-basics-test-driven-development-with-rspec/ directory, you'll see a list of files (along with a spec/ directory). Click calculator.rb, and it will open in the editor.

In calculator.rb, you should see, well, nothing. We'll fix that soon.

Now open up spec/calculator_spec.rb. Hey, there's something! What's all of this stuff doing?

Note: The spec/calculator_spec.rb has great info that we want to look at, but do not edit this file. Otherwise, you may have extra difficulty passing this lab.

A few lines down in the spec/calculator_spec.rb file you will see:

describe "./calculator.rb" do
  # Lots of code written inside here
end

describe is a method provided by our test library, RSpec. We'll go into depth on methods soon, but briefly: methods let us group up a set of statements into a sort of bundle. Whenever that bundle's name is called, all the statements inside are called in order. This is incredibly useful when we need to run the same statements over and over (as we do running and rerunning tests).

The describe method holds our tests. Just after describe is a string, "./calculator.rb". Here, RSpec is telling us that the tests that come afterwords will be about the file calculator.rb. We see the first one inside another RSpec method, it:

it "contains a local variable called first_number that is assigned to a number" do
  # code for first test is in here
end

The it method has a longer string describing what this test is for. In this case, since this is within the describe method, we can infer that calculator.rb contains a local variable called first_number, and that the variable is assigned to a number.

Looking at what is inside, we can see the actual test that has been described:

it "contains a local variable called first_number that is assigned to a number" do
  first_number = get_variable_from_file('./calculator.rb', "first_number")

  expect(first_number).to be_an(Integer).or be_a(Float)
end

Reading the first line, we see a variable, first_number being assigned to something, get_variable_from_file. This is actually another method! For now, we don't really need to know what this method is doing (although we could probably guess by its name). All we need to know is that the result of get_variable_from_file('./calculator.rb', "first_number") is getting assigned to first_number.

Two lines down, we see something else that is new: expect.

expect(first_number).to be_an(Integer).or be_a(Float)

This is the actual test that will produce a passing or failing response when we run learn. Read outloud, this line sounds like a normal English sentence: Expect first_number to be an integer or be a float.

  • expect is another RSpec method, indicating a test statement
  • first_number is the variable defined two lines prior. It is the subject of the test
  • to allows the test to define a positive expectation. Using not_to here would define a negative expectation
  • be_an / be_a are known as RSpec matchers. In this case, they are for setting up the expectation that something is a certain data type
  • or allows for two possible passing scenarios here: either first_number is an integer, or first_number is a float

If we run learn this test appears first, along with the string descriptions we saw in describe and it:

./calculator.rb
  contains a local variable called first_number that is assigned to a number (FAILED - 1)

Failures:

  1) ./calculator.rb contains a local variable called first_number that is assigned to a number
     Failure/Error: raise NameError, "local variable #{variable} not defined in #{file}."

     NameError:
       local variable first_number not defined in ./calculator.rb.
     # ./spec/spec_helper.rb:14:in `rescue in get_variable_from_file'
     # ./spec/spec_helper.rb:11:in `get_variable_from_file'
     # ./spec/calculator_spec.rb:6:in `block (2 levels) in <top (required)>'
     # ------------------
     # --- Caused by: ---
     # NameError:
     #   local variable `first_number' is not defined for #<Binding:0x00007fb7db153ca0>
     #   ./spec/spec_helper.rb:12:in `local_variable_get'

What if we were to create a variable called first_number inside calculator.rb, but assigned it to something other than a number? Say, for instance, we wrote first_number = "Hello world!" in calculator.rb. Running learn again, we would see this:

./calculator.rb
  contains a local variable called first_number that is assigned to a number (FAILED - 1)

Failures:

  1) ./calculator.rb contains a local variable called first_number that is assigned to a number
     Failure/Error: expect(first_number).to be_an(Integer).or be_a(Float)

          expected "Hello world!" to be a kind of Integer

       ...or:

          expected "Hello world!" to be a kind of Float
     # ./spec/calculator_spec.rb:8:in `block (2 levels) in <top (required)>'

Notice that the error message has changed. The test was able to get the variable first_number that we defined inside calculator.rb. It then runs the test on first_number to see if it is a kind of integer or float. It isn't either, so the test fails.

That's a lot to take in. Don't worry too much yet if it's hard to understand what is happening inside of the spec/calculator_spec.rb file. But it's a good idea to open up the file, and gather the information that you can, especially when you are stuck on a lab. Reading test files and their results can give targeted insight into what is breaking and where when you're writing a solution.

We will also provide instructions in the README.md file that will allow you to complete the lab. However, the better you understand the tools you are using, the better equipped you will be as we progress to more and more complex topics.

Solving the Tests for this Lab

Now that you've got a sense of the tests in this lab, it is time to solve them all. There are six in total. In this lab, testing is configured so that you will only see the first test that fails along with any passing tests before that. This means, as you pass each test, you'll see a growing list of passing tests until you've passed them all. Run learn as you work through each step below to see the test results.

  • The first test we've started to solve already. The test is looking for a variable in calculator.rb, first_number. This variable should be set to an integer or float

  • The second test is similar, but this time, looking for second_number. However, there is a second test here that must also pass:

expect(second_number).not_to equal(0)
  • The third test is looking for a local variable named sum. The sum variable is the result of adding first_number and second_number together. This test is using all three variables. Not only that, the test is using whatever values you assigned to first_number and second_number.

  • The fourth, fifth and sixth tests are similar to the tests for sum. Create the variable difference for subtracting, product for multiplying, and quotient for dividing the first_number and second_number variables.

Hint: If you're stuck on a particular variable, try writing the variable in calculator.rb and assigning it a value you know is incorrect. Tests may produce different bits of useful information based on what you've written.

Once you have all tests passing, run learn submit to submit your solution.

Conclusion

Labs are a major part of this course, and all labs rely on tests that you must pass to register completion of the lesson. Being able to read and interpret tests will help you unravel complex challenges ahead. More than that, though, testing is a powerful tool to become familiar with.

Test driven development is a common process for developing programs in which tests are written before code. A feature is first designed. Those designs are then setup as test expectations. Once the tests are created, the actual code is written to pass those tests.

Writing our own tests is still a bit further down the path of learning Ruby, but being able to read tests is a skill that will be immediately helpful to you.

Resources

Test Driven Development RSpec

About

No description, website, or topics provided.

Resources

License

Stars

Watchers

Forks

Releases

No releases published

Packages

No packages published

Languages

  • Ruby 100.0%