Skip to content

luisaforozco/IncompressibleNavierStokes.jl

 
 

Repository files navigation

Logo Logo

IncompressibleNavierStokes

Documentation Workflows Code coverage Quality assurance
Stable Dev Build Status Coverage Aqua QA

This package implements energy-conserving solvers for the incompressible Navier-Stokes equations on a staggered Cartesian grid. It is based on the Matlab package INS2D/INS3D. The simulations can be run on the single/multithreaded CPUs or Nvidia GPUs.

This package also provides experimental support for neural closure models for large eddy simulation.

Installation

To install IncompressibleNavierStokes, open up a Julia-REPL, type ] to get into Pkg-mode, and type:

(v1.10) pkg> add IncompressibleNavierStokes

which will install the package and all dependencies to your local environment. Note that IncompressibleNavierStokes requires Julia version 1.9 or above.

See the Documentation for examples of some typical workflows. More examples can be found in the examples directory.

Source code for paper

See here for the source code used in the paper Discretize first, filter next: learning divergence-consistent closure models for large-eddy simulation.

Gallery

The velocity and pressure fields may be visualized in a live session using Makie. Alternatively, ParaView may be used, after exporting individual snapshot files using the save_vtk function, or the full time series using the VTKWriter processor.

Actuator (2D) Backward Facing Step (2D) Decaying Turbulence (2D) Taylor-Green Vortex (2D)
Actuator (3D) Backward Facing Step (3D) Decaying Turbulence (3D) Taylor-Green Vortex (3D)

IncompressibleNavierStokes also supports adding a temperature equation.

iceandfire_100x100x200.mp4

Demo

The following example code using a negative body force on a small rectangle with an unsteady inflow. It simulates a wind turbine (actuator) under varying wind conditions.

Make sure to have the GLMakie and IncompressibleNavierStokes installed:

using Pkg
Pkg.add(["GLMakie", "IncompressibleNavierStokes"])

Then run run the following code to make a short animation:

using GLMakie
using IncompressibleNavierStokes

# A 2D grid is a Cartesian product of two vectors
n = 40
x = LinRange(0.0, 10.0, 5n + 1)
y = LinRange(-2.0, 2.0, 2n + 1)

# Boundary conditions
boundary_conditions = (
    # Inlet, outlet
    (
        # Unsteady BC requires time derivatives
        DirichletBC(
            (dim, x, y, t) -> sin/ 6 * sin/ 6 * t) + π / 2 * (dim() == 1)),
            (dim, x, y, t) ->/ 6)^2 *
                cos/ 6 * t) *
                cos/ 6 * sin/ 6 * t) + π / 2 * (dim() == 1)),
        ),
        PressureBC(),
    ),

    # Sides
    (PressureBC(), PressureBC()),
)

# Actuator body force: A thrust coefficient distributed over a thin rectangle
inside(x, y) = abs(x - 2.0)  0.055 && abs(y)  0.5
bodyforce(dim, x, y, t) = dim() == 1 && inside(x, y) ? -1.82 : 0.0

# Build setup and assemble operators
setup = Setup(x, y; Re = 100.0, boundary_conditions, bodyforce);

# Initial conditions (extend inflow)
ustart = create_initial_conditions(setup, (dim, x, y) -> dim() == 1 ? 1.0 : 0.0);

# Solve unsteady Navier-Stokes equations
solve_unsteady(;
    setup, ustart, tlims = (0.0, 48.0), Δt = 0.05,
    processors = (
        anim = animator(; setup, path = "vorticity.mp4", nupdate = 4),
        log = timelogger(),
    ),
)

The resulting animation is shown below.

vorticity.mp4

Similar projects

Releases

No releases published

Packages

No packages published

Languages

  • Julia 100.0%