Skip to content

A a spacer plate for a UK single gang light switch, to allow you to mount a smart switch over the existing switch without modifications.

Notifications You must be signed in to change notification settings

marrold/UK_1_Gang_Smart_Switch_Spacer

Repository files navigation

This is a spacer plate for a UK single gang light switch, to allow you to mount a smart switch over the existing switch without modifications.

The switch must be a traditional flat profile switch rather than a modern "Low Profile" or curve fronted switch. Something like a Crabtree Capital SP 1 Gang Switch is perfect.

N.B. I measured a handful of switches and the rocker protrudes <= 5mm from the face plate. 5mm acrylic was enough for my switches, but 6mm might be a better choice if you can find it.

Images

Before affixing the spacer:

After the spacer has been fixed:

Completed:

SVG:

Assembly

  • Cut the mount out of ~5mm acrylic with a laser cutter.
  • Mount over the existing switch. Use Blu Tack, double sided tape or similar to secure it.
  • Mount Smart Switch to spacer

Licence

This project is licensed under the Creative Commons CC BY-NC-SA 4.0 licence.

You are free to share and adapt the code as required, however you must give appropriate credit and indicate what changes have been made. You must also distribute your adaptation under the same license. Commercial use is prohibited.

Acknowledgements

Thanks to the London Hackspace for use of the Laser Cutter.

About

A a spacer plate for a UK single gang light switch, to allow you to mount a smart switch over the existing switch without modifications.

Resources

Stars

Watchers

Forks

Releases

No releases published

Packages

No packages published