Skip to content
New issue

Have a question about this project? Sign up for a free GitHub account to open an issue and contact its maintainers and the community.

By clicking “Sign up for GitHub”, you agree to our terms of service and privacy statement. We’ll occasionally send you account related emails.

Already on GitHub? Sign in to your account

PATH is overridden causing issues with homebrew executables #22743

Closed
Stausssi opened this issue Jan 12, 2024 · 3 comments · Fixed by #22850
Closed

PATH is overridden causing issues with homebrew executables #22743

Stausssi opened this issue Jan 12, 2024 · 3 comments · Fixed by #22850
Assignees
Labels
area-terminal bug Issue identified by VS Code Team member as probable bug experimenting Feature is part of an experiment needs PR Ready to be worked on verified Verification succeeded
Milestone

Comments

@Stausssi
Copy link

Stausssi commented Jan 12, 2024

Type: Bug

Behaviour

Expected vs. Actual

The built-in terminal should use the same executables as a standalone terminal.
However, loading up a built-in terminal causes /usr/bin, /bin and so on to be added to the path before {env.PATH}. This results in system executables being preferred over e.g. homebrew ones.

A concrete problem being caused by this is scripts failing, because the system bash (v3 on macOS) is used over homebrews bash (v5). Same goes for homebrew gnu-sed taking precedence over macOS sed.

Steps to reproduce:

  1. Prepend a custom directory containing any executable overriding the system defaults to your path in your .zshrc (or similar)
  2. Open a terminal window outside VS Code and run which bash -> Should output the custom directory bash
  3. Open the built-in terminal in VS Code and run which bash -> Should output /bin/bash
  4. Show environment contributions of the VS Code terminal also shows that /bin is added to the path before env:PATH is considered.

Diagnostic data

  • Python version (& distribution if applicable, e.g. Anaconda): 3.12.1
  • Type of virtual environment used (e.g. conda, venv, virtualenv, etc.): Pyenv
  • Value of the python.languageServer setting: Pylance
Output for Python in the Output panel (ViewOutput, change the drop-down the upper-right of the Output panel to Python)

2024-01-12 07:55:56.432 [info] Experiment 'pythonREPLSmartSend' is active
2024-01-12 07:55:56.432 [info] Experiment 'pythonTerminalEnvVarActivation' is active
2024-01-12 07:55:56.432 [info] Experiment 'pythonTestAdapter' is active
2024-01-12 07:55:56.477 [info] Default formatter is set to ms-python.black-formatter for workspace /Users/simon/code/foobar
2024-01-12 07:55:56.480 [info] Test server listening.
2024-01-12 07:55:56.484 [info] Python interpreter path: ~/.pyenv/versions/3.12.1/envs/foobar/bin/python
2024-01-12 07:55:56.596 [warning] Retry failed, storage update failed for key PYTHON_GLOBAL_STORAGE_KEYS
2024-01-12 07:55:56.659 [warning] Retry failed, storage update failed for key PYTHON_GLOBAL_STORAGE_KEYS
2024-01-12 07:55:56.659 [warning] Retry failed, storage update failed for key PYTHON_GLOBAL_STORAGE_KEYS
2024-01-12 07:55:56.659 [warning] Retry failed, storage update failed for key PYTHON_GLOBAL_STORAGE_KEYS
2024-01-12 07:55:56.659 [warning] Retry failed, storage update failed for key PYTHON_GLOBAL_STORAGE_KEYS
2024-01-12 07:55:56.659 [warning] Retry failed, storage update failed for key PYTHON_GLOBAL_STORAGE_KEYS
2024-01-12 07:55:56.667 [info] Send text to terminal: echo /bin/zsh
2024-01-12 07:55:56.837 [warning] Retry failed, storage update failed for key PYTHON_GLOBAL_STORAGE_KEYS
2024-01-12 07:55:58.078 [info] Starting Pylance language server.
2024-01-12 07:55:59.716 [info] Shell integration is not working for zsh
2024-01-12 07:55:59.717 [warning] Shell integration is not active, environment activated maybe overriden by the shell.
2024-01-12 07:56:00.651 [info] > /usr/bin/python3 ~/.vscode/extensions/ms-python.python-2023.22.1/pythonFiles/printEnvVariables.py
2024-01-12 07:56:00.651 [info] shell: zsh
2024-01-12 07:56:00.843 [info] Send text to terminal: /usr/bin/python3 /Users/simon/.vscode/extensions/ms-python.python-2023.22.1/pythonFiles/printEnvVariablesToFile.py /Users/simon/.vscode/extensions/ms-python.python-2023.22.1/pythonFiles/deactivate/zsh/envVars.txt

User Settings


venvPath: "<placeholder>"

languageServer: "Pylance"

testing
• pytestEnabled: true
• unittestEnabled: true

Extension version: 2023.22.1
VS Code version: Code 1.85.1 (0ee08df0cf4527e40edc9aa28f4b5bd38bbff2b2, 2023-12-13T09:48:16.874Z)
OS version: Darwin arm64 23.2.0
Modes:

System Info
Item Value
CPUs Apple M1 Pro (10 x 24)
GPU Status 2d_canvas: enabled
canvas_oop_rasterization: enabled_on
direct_rendering_display_compositor: disabled_off_ok
gpu_compositing: enabled
multiple_raster_threads: enabled_on
opengl: enabled_on
rasterization: enabled
raw_draw: disabled_off_ok
video_decode: enabled
video_encode: enabled
vulkan: disabled_off
webgl: enabled
webgl2: enabled
webgpu: enabled
Load (avg) 5, 6, 7
Memory (System) 32.00GB (0.10GB free)
Process Argv --crash-reporter-id 8ecf6c19-f4a2-48d0-8fea-82dc29f155ef
Screen Reader no
VM 0%
A/B Experiments
vsliv368:30146709
vspor879:30202332
vspor708:30202333
vspor363:30204092
vscorecescf:30445987
vscod805:30301674
binariesv615:30325510
vsaa593cf:30376535
py29gd2263:30899288
vscaat:30438848
vsclangdc:30486549
c4g48928:30535728
azure-dev_surveyone:30548225
962ge761:30933248
pythongtdpath:30769146
i26e3531:30792625
welcomedialog:30910333
pythonidxpt:30866567
pythonnoceb:30805159
asynctok:30898717
pythontestfixt:30902429
pythonregdiag2:30936856
pyreplss1:30897532
pythonmypyd1:30879173
pythoncet0:30885854
2e7ec940:30885897
pythontbext0:30879054
accentitlementsc:30887149
dsvsc016:30899300
dsvsc017:30899301
dsvsc018:30899302
aa_t_chat:30882232

@github-actions github-actions bot added the triage-needed Needs assignment to the proper sub-team label Jan 12, 2024
@Stausssi Stausssi changed the title PATH is overwritten causing issues with homebrew executables PATH is overridden causing issues with homebrew executables Jan 12, 2024
@karrtikr karrtikr added the experimenting Feature is part of an experiment label Feb 1, 2024
@karrtikr
Copy link

karrtikr commented Feb 5, 2024

Hi @Stausssi , I have created #22850 which should help with your issue. We plan to make a pre-release in a day or two which contains the fix, stay tuned 🙂

@karrtikr karrtikr added bug Issue identified by VS Code Team member as probable bug area-terminal needs PR Ready to be worked on and removed triage-needed Needs assignment to the proper sub-team labels Feb 5, 2024
@karrtikr karrtikr added this to the February 2024 milestone Feb 5, 2024
@karrtikr
Copy link

karrtikr commented Feb 5, 2024

Fix should be out in the pre-release version of the extension, use the following to try it out:

image

@Stausssi
Copy link
Author

Stausssi commented Feb 5, 2024

The problem is fixed for me, thanks!

@karrtikr karrtikr added the verified Verification succeeded label Feb 5, 2024
@github-actions github-actions bot locked as resolved and limited conversation to collaborators Mar 7, 2024
wesm pushed a commit to posit-dev/positron that referenced this issue Mar 28, 2024
Merge pull request #395 from posit-dev/merge/v2024.2.0

Merge upstream: `v2024.2.0`
--------------------
Commit message for posit-dev/positron-python@7d85a51:

ignore pyright errors in ms testing files

--------------------
Commit message for posit-dev/positron-python@f9a3259:

Bump flask from 3.0.1 to 3.0.2 (posit-dev/positron-python#354)

Bumps [flask](https://github.com/pallets/flask) from 3.0.1 to 3.0.2.
- [Release notes](https://github.com/pallets/flask/releases)
- [Changelog](https://github.com/pallets/flask/blob/main/CHANGES.rst)
- [Commits](pallets/flask@3.0.1...3.0.2)

---
updated-dependencies:
- dependency-name: flask
  dependency-type: direct:production
  update-type: version-update:semver-patch
...

Signed-off-by: dependabot[bot] <support@github.com>
Co-authored-by: dependabot[bot] <49699333+dependabot[bot]@users.noreply.github.com>
--------------------
Commit message for posit-dev/positron-python@ea812a4:

Bump ipywidgets from 8.1.1 to 8.1.2 (posit-dev/positron-python#368)

Bumps [ipywidgets](https://github.com/jupyter-widgets/ipywidgets) from 8.1.1 to 8.1.2.
- [Release notes](https://github.com/jupyter-widgets/ipywidgets/releases)
- [Commits](jupyter-widgets/ipywidgets@8.1.1...8.1.2)

---
updated-dependencies:
- dependency-name: ipywidgets
  dependency-type: direct:production
  update-type: version-update:semver-patch
...

Signed-off-by: dependabot[bot] <support@github.com>
Co-authored-by: dependabot[bot] <49699333+dependabot[bot]@users.noreply.github.com>
Co-authored-by: Isabel Zimmerman <54685329+isabelizimm@users.noreply.github.com>
--------------------
Commit message for posit-dev/positron-python@e3a5399:

Bump pyright from 1.1.349 to 1.1.351 (posit-dev/positron-python#379)

Bumps [pyright](https://github.com/RobertCraigie/pyright-python) from 1.1.349 to 1.1.351.
- [Release notes](https://github.com/RobertCraigie/pyright-python/releases)
- [Commits](RobertCraigie/pyright-python@v1.1.349...v1.1.351)

---
updated-dependencies:
- dependency-name: pyright
  dependency-type: direct:production
  update-type: version-update:semver-patch
...

Signed-off-by: dependabot[bot] <support@github.com>
Co-authored-by: dependabot[bot] <49699333+dependabot[bot]@users.noreply.github.com>
--------------------
Commit message for posit-dev/positron-python@2eeb677:

Bump polars from 0.20.6 to 0.20.11 (posit-dev/positron-python#394)

Bumps [polars](https://github.com/pola-rs/polars) from 0.20.6 to 0.20.11.
- [Release notes](https://github.com/pola-rs/polars/releases)
- [Commits](pola-rs/polars@py-0.20.6...py-0.20.11)

---
updated-dependencies:
- dependency-name: polars
  dependency-type: direct:production
  update-type: version-update:semver-patch
...

Signed-off-by: dependabot[bot] <support@github.com>
Co-authored-by: dependabot[bot] <49699333+dependabot[bot]@users.noreply.github.com>
--------------------
Commit message for posit-dev/positron-python@573d9fd:

Bump ipykernel from 6.29.0 to 6.29.3 (posit-dev/positron-python#390)

Bumps [ipykernel](https://github.com/ipython/ipykernel) from 6.29.0 to 6.29.3.
- [Release notes](https://github.com/ipython/ipykernel/releases)
- [Changelog](https://github.com/ipython/ipykernel/blob/main/CHANGELOG.md)
- [Commits](ipython/ipykernel@v6.29.0...v6.29.3)

---
updated-dependencies:
- dependency-name: ipykernel
  dependency-type: direct:production
  update-type: version-update:semver-patch
...

Signed-off-by: dependabot[bot] <support@github.com>
Co-authored-by: dependabot[bot] <49699333+dependabot[bot]@users.noreply.github.com>
--------------------
Commit message for posit-dev/positron-python@334b383:

update package.json

--------------------
Commit message for posit-dev/positron-python@7ce08b1:

Merge tag 'v2024.2.0' into merge/v2024.2.0

--------------------
Commit message for posit-dev/positron-python@063ba15:

Finalized-release-2024.2.0 (posit-dev/positron-python#22996)

Finalized release 2024.2.0: removing -rc
--------------------
Commit message for posit-dev/positron-python@3eef025:

Bump release 2024.2 (posit-dev/positron-python#22972)

Bump release 2024.2
--------------------
Commit message for posit-dev/positron-python@1fbd77b:

 skip tests, pytest upstream regression (posit-dev/positron-python#22974)

Short-term fix to stop CI from failing due to a regression upstream from
pytest. See issue for details:
microsoft/vscode-python#22965.
--------------------
Commit message for microsoft/vscode-python@4fca030:

Adding GDPR tag for isFirstSession (microsoft/vscode-python#22955)


--------------------
Commit message for microsoft/vscode-python@ba94553:

Modify telemetry to contain trigger time as property (microsoft/vscode-python#22941)


--------------------
Commit message for microsoft/vscode-python@178a0b2:

Fix bug with symlink for pytest execution (microsoft/vscode-python#22952)

Fixes microsoft/vscode-python#22938
--------------------
Commit message for microsoft/vscode-python@bae7d40:

Update vscode-tas-client version (microsoft/vscode-python#22876)


--------------------
Commit message for microsoft/vscode-python@75ed73e:

Fix Bug with Pytest when using symlinked workspaces (microsoft/vscode-python#22885)

fixes microsoft/vscode-python#22658

also implements switching to arg mapping which is this issue here:
microsoft/vscode-python#22076

---------

Co-authored-by: Karthik Nadig <kanadig@microsoft.com>
--------------------
Commit message for microsoft/vscode-python@e53651d:

Prevent first Python command being lost (microsoft/vscode-python#22902)

Fixes: microsoft/vscode-python#22673
Fixes: microsoft/vscode-python#22545
Fixes: microsoft/vscode-python#22691 

Making best effort to address issue where very first command sent to
REPL via Terminal gets ignored, or gets pasted both in Terminal and in
REPL.

With the fix, we observe whether Python REPL is launched in Terminal via
VS Code's `onDidWriteTerminalData` and send the command, or wait three
seconds as a fallback mechanism.

These two combined together will significantly reduce or resolve
all-together the chance of very first command being swollen up or gets
pasted twice in Terminal and REPL previously where it did not have
context of whether Python REPL instance have started inside the Terminal
or not.
--------------------
Commit message for microsoft/vscode-python@a60fbd5:

Add GDPR tags for new Pylance properties (microsoft/vscode-python#22922)


--------------------
Commit message for microsoft/vscode-python@aff0b05:

Use python debugger in testing (microsoft/vscode-python#22903)

closed: microsoft/vscode-python-debugger#174
--------------------
Commit message for microsoft/vscode-python@84734a8:

Updating installed extensions section of README.md (microsoft/vscode-python#22893)

Adding the Python Debugger to the installed extensions section of the
README.
--------------------
Commit message for microsoft/vscode-python@2159238:

Bump actions/setup-python from 4 to 5 in /.github/actions/build-vsix (microsoft/vscode-python#22602)

Bumps [actions/setup-python](https://github.com/actions/setup-python)
from 4 to 5.
<details>
<summary>Release notes</summary>
<p><em>Sourced from <a
href="https://github.com/actions/setup-python/releases">actions/setup-python's
releases</a>.</em></p>
<blockquote>
<h2>v5.0.0</h2>
<h2>What's Changed</h2>
<p>In scope of this release, we update node version runtime from node16
to node20 (<a
href="https://redirect.github.com/actions/setup-python/pull/772">actions/setup-python#772</a>).
Besides, we update dependencies to the latest versions.</p>
<p><strong>Full Changelog</strong>: <a
href="https://github.com/actions/setup-python/compare/v4.8.0...v5.0.0">https://github.com/actions/setup-python/compare/v4.8.0...v5.0.0</a></p>
<h2>v4.8.0</h2>
<h2>What's Changed</h2>
<p>In scope of this release we added support for GraalPy (<a
href="https://redirect.github.com/actions/setup-python/pull/694">actions/setup-python#694</a>).
You can use this snippet to set up GraalPy:</p>
<pre lang="yaml"><code>steps:
- uses: actions/checkout@v4
- uses: actions/setup-python@v4 
  with:
    python-version: 'graalpy-22.3' 
- run: python my_script.py
</code></pre>
<p>Besides, the release contains such changes as:</p>
<ul>
<li>Trim python version when reading from file by <a
href="https://github.com/FerranPares"><code>@​FerranPares</code></a> in
<a
href="https://redirect.github.com/actions/setup-python/pull/628">actions/setup-python#628</a></li>
<li>Use non-deprecated versions in examples by <a
href="https://github.com/jeffwidman"><code>@​jeffwidman</code></a> in <a
href="https://redirect.github.com/actions/setup-python/pull/724">actions/setup-python#724</a></li>
<li>Change deprecation comment to past tense by <a
href="https://github.com/jeffwidman"><code>@​jeffwidman</code></a> in <a
href="https://redirect.github.com/actions/setup-python/pull/723">actions/setup-python#723</a></li>
<li>Bump <code>@​babel/traverse</code> from 7.9.0 to 7.23.2 by <a
href="https://github.com/dependabot"><code>@​dependabot</code></a> in <a
href="https://redirect.github.com/actions/setup-python/pull/743">actions/setup-python#743</a></li>
<li>advanced-usage.md: Encourage the use actions/checkout@v4 by <a
href="https://github.com/cclauss"><code>@​cclauss</code></a> in <a
href="https://redirect.github.com/actions/setup-python/pull/729">actions/setup-python#729</a></li>
<li>Examples now use checkout@v4 by <a
href="https://github.com/simonw"><code>@​simonw</code></a> in <a
href="https://redirect.github.com/actions/setup-python/pull/738">actions/setup-python#738</a></li>
<li>Update actions/checkout to v4 by <a
href="https://github.com/dmitry-shibanov"><code>@​dmitry-shibanov</code></a>
in <a
href="https://redirect.github.com/actions/setup-python/pull/761">actions/setup-python#761</a></li>
</ul>
<h2>New Contributors</h2>
<ul>
<li><a
href="https://github.com/FerranPares"><code>@​FerranPares</code></a>
made their first contribution in <a
href="https://redirect.github.com/actions/setup-python/pull/628">actions/setup-python#628</a></li>
<li><a href="https://github.com/timfel"><code>@​timfel</code></a> made
their first contribution in <a
href="https://redirect.github.com/actions/setup-python/pull/694">actions/setup-python#694</a></li>
<li><a
href="https://github.com/jeffwidman"><code>@​jeffwidman</code></a> made
their first contribution in <a
href="https://redirect.github.com/actions/setup-python/pull/724">actions/setup-python#724</a></li>
</ul>
<p><strong>Full Changelog</strong>: <a
href="https://github.com/actions/setup-python/compare/v4...v4.8.0">https://github.com/actions/setup-python/compare/v4...v4.8.0</a></p>
<h2>v4.7.1</h2>
<h2>What's Changed</h2>
<ul>
<li>Bump word-wrap from 1.2.3 to 1.2.4 by <a
href="https://github.com/dependabot"><code>@​dependabot</code></a> in <a
href="https://redirect.github.com/actions/setup-python/pull/702">actions/setup-python#702</a></li>
<li>Add range validation for toml files by <a
href="https://github.com/dmitry-shibanov"><code>@​dmitry-shibanov</code></a>
in <a
href="https://redirect.github.com/actions/setup-python/pull/726">actions/setup-python#726</a></li>
</ul>
<p><strong>Full Changelog</strong>: <a
href="https://github.com/actions/setup-python/compare/v4...v4.7.1">https://github.com/actions/setup-python/compare/v4...v4.7.1</a></p>
<h2>v4.7.0</h2>
<p>In scope of this release, the support for reading python version from
pyproject.toml was added (<a
href="https://redirect.github.com/actions/setup-python/pull/669">actions/setup-python#669</a>).</p>
<pre lang="yaml"><code>      - name: Setup Python
        uses: actions/setup-python@v4
&lt;/tr&gt;&lt;/table&gt; 
</code></pre>
</blockquote>
<p>... (truncated)</p>
</details>
<details>
<summary>Commits</summary>
<ul>
<li><a
href="https://github.com/actions/setup-python/commit/0a5c61591373683505ea898e09a3ea4f39ef2b9c"><code>0a5c615</code></a>
Update action to node20 (<a
href="https://redirect.github.com/actions/setup-python/issues/772">#772</a>)</li>
<li><a
href="https://github.com/actions/setup-python/commit/0ae58361cdfd39e2950bed97a1e26aa20c3d8955"><code>0ae5836</code></a>
Add example of GraalPy to docs (<a
href="https://redirect.github.com/actions/setup-python/issues/773">#773</a>)</li>
<li><a
href="https://github.com/actions/setup-python/commit/b64ffcaf5b410884ad320a9cfac8866006a109aa"><code>b64ffca</code></a>
update actions/checkout to v4 (<a
href="https://redirect.github.com/actions/setup-python/issues/761">#761</a>)</li>
<li><a
href="https://github.com/actions/setup-python/commit/8d2896179abf658742de432b3f203d2c2d86a587"><code>8d28961</code></a>
Examples now use checkout@v4 (<a
href="https://redirect.github.com/actions/setup-python/issues/738">#738</a>)</li>
<li><a
href="https://github.com/actions/setup-python/commit/7bc6abb01e0555719edc2dbca70a2fde309e5e56"><code>7bc6abb</code></a>
advanced-usage.md: Encourage the use actions/checkout@v4 (<a
href="https://redirect.github.com/actions/setup-python/issues/729">#729</a>)</li>
<li><a
href="https://github.com/actions/setup-python/commit/e8111cec9d3dc15220d8a3b638f08419f57b906a"><code>e8111ce</code></a>
Bump <code>@​babel/traverse</code> from 7.9.0 to 7.23.2 (<a
href="https://redirect.github.com/actions/setup-python/issues/743">#743</a>)</li>
<li><a
href="https://github.com/actions/setup-python/commit/a00ea43da65e7c04d2bdae58b3afecd77057eb9e"><code>a00ea43</code></a>
add fix for graalpy ci (<a
href="https://redirect.github.com/actions/setup-python/issues/741">#741</a>)</li>
<li><a
href="https://github.com/actions/setup-python/commit/8635b1ccc5934e73ed3510980fd2e7790b85839b"><code>8635b1c</code></a>
Change deprecation comment to past tense (<a
href="https://redirect.github.com/actions/setup-python/issues/723">#723</a>)</li>
<li><a
href="https://github.com/actions/setup-python/commit/f6cc428f535856f9c23558d01765a42a4d6cf758"><code>f6cc428</code></a>
Use non-deprecated versions in examples (<a
href="https://redirect.github.com/actions/setup-python/issues/724">#724</a>)</li>
<li><a
href="https://github.com/actions/setup-python/commit/5f2af211d616f86005883b44826180b21abb4060"><code>5f2af21</code></a>
Add GraalPy support (<a
href="https://redirect.github.com/actions/setup-python/issues/694">#694</a>)</li>
<li>Additional commits viewable in <a
href="https://github.com/actions/setup-python/compare/v4...v5">compare
view</a></li>
</ul>
</details>
<br />


[![Dependabot compatibility
score](https://dependabot-badges.githubapp.com/badges/compatibility_score?dependency-name=actions/setup-python&package-manager=github_actions&previous-version=4&new-version=5)](https://docs.github.com/en/github/managing-security-vulnerabilities/about-dependabot-security-updates#about-compatibility-scores)

Dependabot will resolve any conflicts with this PR as long as you don't
alter it yourself. You can also trigger a rebase manually by commenting
`@dependabot rebase`.

[//]: # (dependabot-automerge-start)
[//]: # (dependabot-automerge-end)

---

<details>
<summary>Dependabot commands and options</summary>
<br />

You can trigger Dependabot actions by commenting on this PR:
- `@dependabot rebase` will rebase this PR
- `@dependabot recreate` will recreate this PR, overwriting any edits
that have been made to it
- `@dependabot merge` will merge this PR after your CI passes on it
- `@dependabot squash and merge` will squash and merge this PR after
your CI passes on it
- `@dependabot cancel merge` will cancel a previously requested merge
and block automerging
- `@dependabot reopen` will reopen this PR if it is closed
- `@dependabot close` will close this PR and stop Dependabot recreating
it. You can achieve the same result by closing it manually
- `@dependabot show <dependency name> ignore conditions` will show all
of the ignore conditions of the specified dependency
- `@dependabot ignore this major version` will close this PR and stop
Dependabot creating any more for this major version (unless you reopen
the PR or upgrade to it yourself)
- `@dependabot ignore this minor version` will close this PR and stop
Dependabot creating any more for this minor version (unless you reopen
the PR or upgrade to it yourself)
- `@dependabot ignore this dependency` will close this PR and stop
Dependabot creating any more for this dependency (unless you reopen the
PR or upgrade to it yourself)


</details>

Signed-off-by: dependabot[bot] <support@github.com>
Co-authored-by: dependabot[bot] <49699333+dependabot[bot]@users.noreply.github.com>
--------------------
Commit message for microsoft/vscode-python@83cf53b:

Add "isMeasurement" for LANGUAGE_SERVER_TRIGGER_DURATION (microsoft/vscode-python#22912)

cc/ @cwebster-99
--------------------
Commit message for microsoft/vscode-python@7be33eb:

Add more shell integration sequences to check for (microsoft/vscode-python#22911)

Based on discussion with Daniel

For microsoft/vscode-python#22440
--------------------
Commit message for microsoft/vscode-python@6838ccf:

Do not activate microvenv if terminal.activateEnvironment is set to false and when not in terminal experiment (microsoft/vscode-python#22909)


--------------------
Commit message for microsoft/vscode-python@2dc158e:

Log options being passed when using environment collection APIs (microsoft/vscode-python#22907)

For microsoft/vscode-python#22899
--------------------
Commit message for microsoft/vscode-python@5f971ae:

Prepend `PATH` both at shell integration and process creation (microsoft/vscode-python#22905)


--------------------
Commit message for microsoft/vscode-python@5174d5c:

Improve shell integration reliability for zsh (microsoft/vscode-python#22891)

Closes microsoft/vscode-python#22881

If status changes, re-run activation. Also persist once we know shell
integration works for a shell.
--------------------
Commit message for microsoft/vscode-python@b0c34e3:

Add UnicodeDecodeError catching (microsoft/vscode-python#22873)

Resolve `UnicodeDecodeError: 'utf-8' codec can't decode byte 0xd0 in
position 48995: unexpected end of data`

Co-authored-by: Aydar Kamaltdinov <a.kamaltdinov@tinkoff.ru>
--------------------
Commit message for microsoft/vscode-python@8496dfe:

Remove experimental flag for create env prompt (microsoft/vscode-python#22892)

Remove experimental flag for `python.createEnvironment.trigger`.
--------------------
Commit message for microsoft/vscode-python@c4c05a6:

update tree comparison for tests to be order independent for children (microsoft/vscode-python#22832)

following the introduction of pytest 8, the order in which children were
listed changed. Since the order is not important, this updates the tests
to make the tests not consider order of children when comparing actual
and expected outcomes of test runs.
--------------------
Commit message for microsoft/vscode-python@4030717:

Use terminal data write event to figure out whether shell integration is working (microsoft/vscode-python#22872)

Closes microsoft/vscode-python#22439

Blocked on microsoft/vscode#204616
--------------------
Commit message for microsoft/vscode-python@d674a17:

Fix Run Recent Command Caching Issue (microsoft/vscode-python#22867)

Resolves: microsoft/vscode-python#22811

Fixing caching issue where users were experiencing cached
success/failure decoration that were impacted when using `Terminal: Run
Recent Command` on success/failure commands
--------------------
Commit message for microsoft/vscode-python@c0bf1b7:

Improve time taken to trigger language server startup once extension activation is triggered (microsoft/vscode-python#22514)

For microsoft/vscode-python#22146 

Improves time taken to trigger language server startup once extension
activation is triggered

- Do not block discovery on windows registry
- Do not blocking auto-selection on validation of all interpreters
- Make Windows Path locator faster
--------------------
Commit message for microsoft/vscode-python@20c1a10:

Log when running Python file (microsoft/vscode-python#22851)

For microsoft/vscode-python#22711
--------------------
Commit message for microsoft/vscode-python@8aaa70e:

Fix venv activation for cshell (microsoft/vscode-python#22852)

Closes microsoft/vscode-python#22822

Use current shell to figure out whether shell integration is working,
even when using fallback shell for getting environment variables.
--------------------
Commit message for microsoft/vscode-python@1626c46:

Do not run commands to check whether shell integration is working (microsoft/vscode-python#22850)

Closes microsoft/vscode-python#22774 closes
microsoft/vscode-python#22743
--------------------
Commit message for microsoft/vscode-python@13a6727:

include multiple pytest versions in PR check (microsoft/vscode-python#22813)

update PR check workflow to include testing Python tests against 3
versions of pytest: pre-release, stable release, and oldest supported
version.

---------

Co-authored-by: Karthik Nadig <kanadig@microsoft.com>
--------------------
Commit message for microsoft/vscode-python@6e8c56c:

Bump dev version 2024.1 (microsoft/vscode-python#22805)



Lead-authored-by: Kartik Raj <karraj@microsoft.com>
Co-authored-by: Aydar Kamaltdinov <aydar.kamaltdinov@gmail.com>
Co-authored-by: paulacamargo25 <paulitacv25@gmail.com>
Co-authored-by: Luciana Abud <45497113+luabud@users.noreply.github.com>
Co-authored-by: Courtney Webster <60238438+cwebster-99@users.noreply.github.com>
Co-authored-by: Anthony Kim <62267334+anthonykim1@users.noreply.github.com>
Co-authored-by: Isabel Zimmerman <isabel.zimmerman@rstudio.com>
Co-authored-by: Eleanor Boyd <eleanorboyd@microsoft.com>
Co-authored-by: dependabot[bot] <49699333+dependabot[bot]@users.noreply.github.com>
Signed-off-by: GitHub <noreply@github.com>
wesm pushed a commit to posit-dev/positron that referenced this issue Mar 28, 2024
Merge pull request #395 from posit-dev/merge/v2024.2.0

Merge upstream: `v2024.2.0`
--------------------
Commit message for posit-dev/positron-python@7d85a51:

ignore pyright errors in ms testing files

--------------------
Commit message for posit-dev/positron-python@f9a3259:

Bump flask from 3.0.1 to 3.0.2 (posit-dev/positron-python#354)

Bumps [flask](https://github.com/pallets/flask) from 3.0.1 to 3.0.2.
- [Release notes](https://github.com/pallets/flask/releases)
- [Changelog](https://github.com/pallets/flask/blob/main/CHANGES.rst)
- [Commits](pallets/flask@3.0.1...3.0.2)

---
updated-dependencies:
- dependency-name: flask
  dependency-type: direct:production
  update-type: version-update:semver-patch
...

Signed-off-by: dependabot[bot] <support@github.com>
Co-authored-by: dependabot[bot] <49699333+dependabot[bot]@users.noreply.github.com>
--------------------
Commit message for posit-dev/positron-python@ea812a4:

Bump ipywidgets from 8.1.1 to 8.1.2 (posit-dev/positron-python#368)

Bumps [ipywidgets](https://github.com/jupyter-widgets/ipywidgets) from 8.1.1 to 8.1.2.
- [Release notes](https://github.com/jupyter-widgets/ipywidgets/releases)
- [Commits](jupyter-widgets/ipywidgets@8.1.1...8.1.2)

---
updated-dependencies:
- dependency-name: ipywidgets
  dependency-type: direct:production
  update-type: version-update:semver-patch
...

Signed-off-by: dependabot[bot] <support@github.com>
Co-authored-by: dependabot[bot] <49699333+dependabot[bot]@users.noreply.github.com>
Co-authored-by: Isabel Zimmerman <54685329+isabelizimm@users.noreply.github.com>
--------------------
Commit message for posit-dev/positron-python@e3a5399:

Bump pyright from 1.1.349 to 1.1.351 (posit-dev/positron-python#379)

Bumps [pyright](https://github.com/RobertCraigie/pyright-python) from 1.1.349 to 1.1.351.
- [Release notes](https://github.com/RobertCraigie/pyright-python/releases)
- [Commits](RobertCraigie/pyright-python@v1.1.349...v1.1.351)

---
updated-dependencies:
- dependency-name: pyright
  dependency-type: direct:production
  update-type: version-update:semver-patch
...

Signed-off-by: dependabot[bot] <support@github.com>
Co-authored-by: dependabot[bot] <49699333+dependabot[bot]@users.noreply.github.com>
--------------------
Commit message for posit-dev/positron-python@2eeb677:

Bump polars from 0.20.6 to 0.20.11 (posit-dev/positron-python#394)

Bumps [polars](https://github.com/pola-rs/polars) from 0.20.6 to 0.20.11.
- [Release notes](https://github.com/pola-rs/polars/releases)
- [Commits](pola-rs/polars@py-0.20.6...py-0.20.11)

---
updated-dependencies:
- dependency-name: polars
  dependency-type: direct:production
  update-type: version-update:semver-patch
...

Signed-off-by: dependabot[bot] <support@github.com>
Co-authored-by: dependabot[bot] <49699333+dependabot[bot]@users.noreply.github.com>
--------------------
Commit message for posit-dev/positron-python@573d9fd:

Bump ipykernel from 6.29.0 to 6.29.3 (posit-dev/positron-python#390)

Bumps [ipykernel](https://github.com/ipython/ipykernel) from 6.29.0 to 6.29.3.
- [Release notes](https://github.com/ipython/ipykernel/releases)
- [Changelog](https://github.com/ipython/ipykernel/blob/main/CHANGELOG.md)
- [Commits](ipython/ipykernel@v6.29.0...v6.29.3)

---
updated-dependencies:
- dependency-name: ipykernel
  dependency-type: direct:production
  update-type: version-update:semver-patch
...

Signed-off-by: dependabot[bot] <support@github.com>
Co-authored-by: dependabot[bot] <49699333+dependabot[bot]@users.noreply.github.com>
--------------------
Commit message for posit-dev/positron-python@334b383:

update package.json

--------------------
Commit message for posit-dev/positron-python@7ce08b1:

Merge tag 'v2024.2.0' into merge/v2024.2.0

--------------------
Commit message for posit-dev/positron-python@063ba15:

Finalized-release-2024.2.0 (posit-dev/positron-python#22996)

Finalized release 2024.2.0: removing -rc
--------------------
Commit message for posit-dev/positron-python@3eef025:

Bump release 2024.2 (posit-dev/positron-python#22972)

Bump release 2024.2
--------------------
Commit message for posit-dev/positron-python@1fbd77b:

 skip tests, pytest upstream regression (posit-dev/positron-python#22974)

Short-term fix to stop CI from failing due to a regression upstream from
pytest. See issue for details:
microsoft/vscode-python#22965.
--------------------
Commit message for microsoft/vscode-python@4fca030:

Adding GDPR tag for isFirstSession (microsoft/vscode-python#22955)


--------------------
Commit message for microsoft/vscode-python@ba94553:

Modify telemetry to contain trigger time as property (microsoft/vscode-python#22941)


--------------------
Commit message for microsoft/vscode-python@178a0b2:

Fix bug with symlink for pytest execution (microsoft/vscode-python#22952)

Fixes microsoft/vscode-python#22938
--------------------
Commit message for microsoft/vscode-python@bae7d40:

Update vscode-tas-client version (microsoft/vscode-python#22876)


--------------------
Commit message for microsoft/vscode-python@75ed73e:

Fix Bug with Pytest when using symlinked workspaces (microsoft/vscode-python#22885)

fixes microsoft/vscode-python#22658

also implements switching to arg mapping which is this issue here:
microsoft/vscode-python#22076

---------

Co-authored-by: Karthik Nadig <kanadig@microsoft.com>
--------------------
Commit message for microsoft/vscode-python@e53651d:

Prevent first Python command being lost (microsoft/vscode-python#22902)

Fixes: microsoft/vscode-python#22673
Fixes: microsoft/vscode-python#22545
Fixes: microsoft/vscode-python#22691 

Making best effort to address issue where very first command sent to
REPL via Terminal gets ignored, or gets pasted both in Terminal and in
REPL.

With the fix, we observe whether Python REPL is launched in Terminal via
VS Code's `onDidWriteTerminalData` and send the command, or wait three
seconds as a fallback mechanism.

These two combined together will significantly reduce or resolve
all-together the chance of very first command being swollen up or gets
pasted twice in Terminal and REPL previously where it did not have
context of whether Python REPL instance have started inside the Terminal
or not.
--------------------
Commit message for microsoft/vscode-python@a60fbd5:

Add GDPR tags for new Pylance properties (microsoft/vscode-python#22922)


--------------------
Commit message for microsoft/vscode-python@aff0b05:

Use python debugger in testing (microsoft/vscode-python#22903)

closed: microsoft/vscode-python-debugger#174
--------------------
Commit message for microsoft/vscode-python@84734a8:

Updating installed extensions section of README.md (microsoft/vscode-python#22893)

Adding the Python Debugger to the installed extensions section of the
README.
--------------------
Commit message for microsoft/vscode-python@2159238:

Bump actions/setup-python from 4 to 5 in /.github/actions/build-vsix (microsoft/vscode-python#22602)

Bumps [actions/setup-python](https://github.com/actions/setup-python)
from 4 to 5.
<details>
<summary>Release notes</summary>
<p><em>Sourced from <a
href="https://github.com/actions/setup-python/releases">actions/setup-python's
releases</a>.</em></p>
<blockquote>
<h2>v5.0.0</h2>
<h2>What's Changed</h2>
<p>In scope of this release, we update node version runtime from node16
to node20 (<a
href="https://redirect.github.com/actions/setup-python/pull/772">actions/setup-python#772</a>).
Besides, we update dependencies to the latest versions.</p>
<p><strong>Full Changelog</strong>: <a
href="https://github.com/actions/setup-python/compare/v4.8.0...v5.0.0">https://github.com/actions/setup-python/compare/v4.8.0...v5.0.0</a></p>
<h2>v4.8.0</h2>
<h2>What's Changed</h2>
<p>In scope of this release we added support for GraalPy (<a
href="https://redirect.github.com/actions/setup-python/pull/694">actions/setup-python#694</a>).
You can use this snippet to set up GraalPy:</p>
<pre lang="yaml"><code>steps:
- uses: actions/checkout@v4
- uses: actions/setup-python@v4 
  with:
    python-version: 'graalpy-22.3' 
- run: python my_script.py
</code></pre>
<p>Besides, the release contains such changes as:</p>
<ul>
<li>Trim python version when reading from file by <a
href="https://github.com/FerranPares"><code>@​FerranPares</code></a> in
<a
href="https://redirect.github.com/actions/setup-python/pull/628">actions/setup-python#628</a></li>
<li>Use non-deprecated versions in examples by <a
href="https://github.com/jeffwidman"><code>@​jeffwidman</code></a> in <a
href="https://redirect.github.com/actions/setup-python/pull/724">actions/setup-python#724</a></li>
<li>Change deprecation comment to past tense by <a
href="https://github.com/jeffwidman"><code>@​jeffwidman</code></a> in <a
href="https://redirect.github.com/actions/setup-python/pull/723">actions/setup-python#723</a></li>
<li>Bump <code>@​babel/traverse</code> from 7.9.0 to 7.23.2 by <a
href="https://github.com/dependabot"><code>@​dependabot</code></a> in <a
href="https://redirect.github.com/actions/setup-python/pull/743">actions/setup-python#743</a></li>
<li>advanced-usage.md: Encourage the use actions/checkout@v4 by <a
href="https://github.com/cclauss"><code>@​cclauss</code></a> in <a
href="https://redirect.github.com/actions/setup-python/pull/729">actions/setup-python#729</a></li>
<li>Examples now use checkout@v4 by <a
href="https://github.com/simonw"><code>@​simonw</code></a> in <a
href="https://redirect.github.com/actions/setup-python/pull/738">actions/setup-python#738</a></li>
<li>Update actions/checkout to v4 by <a
href="https://github.com/dmitry-shibanov"><code>@​dmitry-shibanov</code></a>
in <a
href="https://redirect.github.com/actions/setup-python/pull/761">actions/setup-python#761</a></li>
</ul>
<h2>New Contributors</h2>
<ul>
<li><a
href="https://github.com/FerranPares"><code>@​FerranPares</code></a>
made their first contribution in <a
href="https://redirect.github.com/actions/setup-python/pull/628">actions/setup-python#628</a></li>
<li><a href="https://github.com/timfel"><code>@​timfel</code></a> made
their first contribution in <a
href="https://redirect.github.com/actions/setup-python/pull/694">actions/setup-python#694</a></li>
<li><a
href="https://github.com/jeffwidman"><code>@​jeffwidman</code></a> made
their first contribution in <a
href="https://redirect.github.com/actions/setup-python/pull/724">actions/setup-python#724</a></li>
</ul>
<p><strong>Full Changelog</strong>: <a
href="https://github.com/actions/setup-python/compare/v4...v4.8.0">https://github.com/actions/setup-python/compare/v4...v4.8.0</a></p>
<h2>v4.7.1</h2>
<h2>What's Changed</h2>
<ul>
<li>Bump word-wrap from 1.2.3 to 1.2.4 by <a
href="https://github.com/dependabot"><code>@​dependabot</code></a> in <a
href="https://redirect.github.com/actions/setup-python/pull/702">actions/setup-python#702</a></li>
<li>Add range validation for toml files by <a
href="https://github.com/dmitry-shibanov"><code>@​dmitry-shibanov</code></a>
in <a
href="https://redirect.github.com/actions/setup-python/pull/726">actions/setup-python#726</a></li>
</ul>
<p><strong>Full Changelog</strong>: <a
href="https://github.com/actions/setup-python/compare/v4...v4.7.1">https://github.com/actions/setup-python/compare/v4...v4.7.1</a></p>
<h2>v4.7.0</h2>
<p>In scope of this release, the support for reading python version from
pyproject.toml was added (<a
href="https://redirect.github.com/actions/setup-python/pull/669">actions/setup-python#669</a>).</p>
<pre lang="yaml"><code>      - name: Setup Python
        uses: actions/setup-python@v4
&lt;/tr&gt;&lt;/table&gt; 
</code></pre>
</blockquote>
<p>... (truncated)</p>
</details>
<details>
<summary>Commits</summary>
<ul>
<li><a
href="https://github.com/actions/setup-python/commit/0a5c61591373683505ea898e09a3ea4f39ef2b9c"><code>0a5c615</code></a>
Update action to node20 (<a
href="https://redirect.github.com/actions/setup-python/issues/772">#772</a>)</li>
<li><a
href="https://github.com/actions/setup-python/commit/0ae58361cdfd39e2950bed97a1e26aa20c3d8955"><code>0ae5836</code></a>
Add example of GraalPy to docs (<a
href="https://redirect.github.com/actions/setup-python/issues/773">#773</a>)</li>
<li><a
href="https://github.com/actions/setup-python/commit/b64ffcaf5b410884ad320a9cfac8866006a109aa"><code>b64ffca</code></a>
update actions/checkout to v4 (<a
href="https://redirect.github.com/actions/setup-python/issues/761">#761</a>)</li>
<li><a
href="https://github.com/actions/setup-python/commit/8d2896179abf658742de432b3f203d2c2d86a587"><code>8d28961</code></a>
Examples now use checkout@v4 (<a
href="https://redirect.github.com/actions/setup-python/issues/738">#738</a>)</li>
<li><a
href="https://github.com/actions/setup-python/commit/7bc6abb01e0555719edc2dbca70a2fde309e5e56"><code>7bc6abb</code></a>
advanced-usage.md: Encourage the use actions/checkout@v4 (<a
href="https://redirect.github.com/actions/setup-python/issues/729">#729</a>)</li>
<li><a
href="https://github.com/actions/setup-python/commit/e8111cec9d3dc15220d8a3b638f08419f57b906a"><code>e8111ce</code></a>
Bump <code>@​babel/traverse</code> from 7.9.0 to 7.23.2 (<a
href="https://redirect.github.com/actions/setup-python/issues/743">#743</a>)</li>
<li><a
href="https://github.com/actions/setup-python/commit/a00ea43da65e7c04d2bdae58b3afecd77057eb9e"><code>a00ea43</code></a>
add fix for graalpy ci (<a
href="https://redirect.github.com/actions/setup-python/issues/741">#741</a>)</li>
<li><a
href="https://github.com/actions/setup-python/commit/8635b1ccc5934e73ed3510980fd2e7790b85839b"><code>8635b1c</code></a>
Change deprecation comment to past tense (<a
href="https://redirect.github.com/actions/setup-python/issues/723">#723</a>)</li>
<li><a
href="https://github.com/actions/setup-python/commit/f6cc428f535856f9c23558d01765a42a4d6cf758"><code>f6cc428</code></a>
Use non-deprecated versions in examples (<a
href="https://redirect.github.com/actions/setup-python/issues/724">#724</a>)</li>
<li><a
href="https://github.com/actions/setup-python/commit/5f2af211d616f86005883b44826180b21abb4060"><code>5f2af21</code></a>
Add GraalPy support (<a
href="https://redirect.github.com/actions/setup-python/issues/694">#694</a>)</li>
<li>Additional commits viewable in <a
href="https://github.com/actions/setup-python/compare/v4...v5">compare
view</a></li>
</ul>
</details>
<br />


[![Dependabot compatibility
score](https://dependabot-badges.githubapp.com/badges/compatibility_score?dependency-name=actions/setup-python&package-manager=github_actions&previous-version=4&new-version=5)](https://docs.github.com/en/github/managing-security-vulnerabilities/about-dependabot-security-updates#about-compatibility-scores)

Dependabot will resolve any conflicts with this PR as long as you don't
alter it yourself. You can also trigger a rebase manually by commenting
`@dependabot rebase`.

[//]: # (dependabot-automerge-start)
[//]: # (dependabot-automerge-end)

---

<details>
<summary>Dependabot commands and options</summary>
<br />

You can trigger Dependabot actions by commenting on this PR:
- `@dependabot rebase` will rebase this PR
- `@dependabot recreate` will recreate this PR, overwriting any edits
that have been made to it
- `@dependabot merge` will merge this PR after your CI passes on it
- `@dependabot squash and merge` will squash and merge this PR after
your CI passes on it
- `@dependabot cancel merge` will cancel a previously requested merge
and block automerging
- `@dependabot reopen` will reopen this PR if it is closed
- `@dependabot close` will close this PR and stop Dependabot recreating
it. You can achieve the same result by closing it manually
- `@dependabot show <dependency name> ignore conditions` will show all
of the ignore conditions of the specified dependency
- `@dependabot ignore this major version` will close this PR and stop
Dependabot creating any more for this major version (unless you reopen
the PR or upgrade to it yourself)
- `@dependabot ignore this minor version` will close this PR and stop
Dependabot creating any more for this minor version (unless you reopen
the PR or upgrade to it yourself)
- `@dependabot ignore this dependency` will close this PR and stop
Dependabot creating any more for this dependency (unless you reopen the
PR or upgrade to it yourself)


</details>

Signed-off-by: dependabot[bot] <support@github.com>
Co-authored-by: dependabot[bot] <49699333+dependabot[bot]@users.noreply.github.com>
--------------------
Commit message for microsoft/vscode-python@83cf53b:

Add "isMeasurement" for LANGUAGE_SERVER_TRIGGER_DURATION (microsoft/vscode-python#22912)

cc/ @cwebster-99
--------------------
Commit message for microsoft/vscode-python@7be33eb:

Add more shell integration sequences to check for (microsoft/vscode-python#22911)

Based on discussion with Daniel

For microsoft/vscode-python#22440
--------------------
Commit message for microsoft/vscode-python@6838ccf:

Do not activate microvenv if terminal.activateEnvironment is set to false and when not in terminal experiment (microsoft/vscode-python#22909)


--------------------
Commit message for microsoft/vscode-python@2dc158e:

Log options being passed when using environment collection APIs (microsoft/vscode-python#22907)

For microsoft/vscode-python#22899
--------------------
Commit message for microsoft/vscode-python@5f971ae:

Prepend `PATH` both at shell integration and process creation (microsoft/vscode-python#22905)


--------------------
Commit message for microsoft/vscode-python@5174d5c:

Improve shell integration reliability for zsh (microsoft/vscode-python#22891)

Closes microsoft/vscode-python#22881

If status changes, re-run activation. Also persist once we know shell
integration works for a shell.
--------------------
Commit message for microsoft/vscode-python@b0c34e3:

Add UnicodeDecodeError catching (microsoft/vscode-python#22873)

Resolve `UnicodeDecodeError: 'utf-8' codec can't decode byte 0xd0 in
position 48995: unexpected end of data`

Co-authored-by: Aydar Kamaltdinov <a.kamaltdinov@tinkoff.ru>
--------------------
Commit message for microsoft/vscode-python@8496dfe:

Remove experimental flag for create env prompt (microsoft/vscode-python#22892)

Remove experimental flag for `python.createEnvironment.trigger`.
--------------------
Commit message for microsoft/vscode-python@c4c05a6:

update tree comparison for tests to be order independent for children (microsoft/vscode-python#22832)

following the introduction of pytest 8, the order in which children were
listed changed. Since the order is not important, this updates the tests
to make the tests not consider order of children when comparing actual
and expected outcomes of test runs.
--------------------
Commit message for microsoft/vscode-python@4030717:

Use terminal data write event to figure out whether shell integration is working (microsoft/vscode-python#22872)

Closes microsoft/vscode-python#22439

Blocked on microsoft/vscode#204616
--------------------
Commit message for microsoft/vscode-python@d674a17:

Fix Run Recent Command Caching Issue (microsoft/vscode-python#22867)

Resolves: microsoft/vscode-python#22811

Fixing caching issue where users were experiencing cached
success/failure decoration that were impacted when using `Terminal: Run
Recent Command` on success/failure commands
--------------------
Commit message for microsoft/vscode-python@c0bf1b7:

Improve time taken to trigger language server startup once extension activation is triggered (microsoft/vscode-python#22514)

For microsoft/vscode-python#22146 

Improves time taken to trigger language server startup once extension
activation is triggered

- Do not block discovery on windows registry
- Do not blocking auto-selection on validation of all interpreters
- Make Windows Path locator faster
--------------------
Commit message for microsoft/vscode-python@20c1a10:

Log when running Python file (microsoft/vscode-python#22851)

For microsoft/vscode-python#22711
--------------------
Commit message for microsoft/vscode-python@8aaa70e:

Fix venv activation for cshell (microsoft/vscode-python#22852)

Closes microsoft/vscode-python#22822

Use current shell to figure out whether shell integration is working,
even when using fallback shell for getting environment variables.
--------------------
Commit message for microsoft/vscode-python@1626c46:

Do not run commands to check whether shell integration is working (microsoft/vscode-python#22850)

Closes microsoft/vscode-python#22774 closes
microsoft/vscode-python#22743
--------------------
Commit message for microsoft/vscode-python@13a6727:

include multiple pytest versions in PR check (microsoft/vscode-python#22813)

update PR check workflow to include testing Python tests against 3
versions of pytest: pre-release, stable release, and oldest supported
version.

---------

Co-authored-by: Karthik Nadig <kanadig@microsoft.com>
--------------------
Commit message for microsoft/vscode-python@6e8c56c:

Bump dev version 2024.1 (microsoft/vscode-python#22805)



Lead-authored-by: Kartik Raj <karraj@microsoft.com>
Co-authored-by: Aydar Kamaltdinov <aydar.kamaltdinov@gmail.com>
Co-authored-by: paulacamargo25 <paulitacv25@gmail.com>
Co-authored-by: Luciana Abud <45497113+luabud@users.noreply.github.com>
Co-authored-by: Courtney Webster <60238438+cwebster-99@users.noreply.github.com>
Co-authored-by: Anthony Kim <62267334+anthonykim1@users.noreply.github.com>
Co-authored-by: Isabel Zimmerman <isabel.zimmerman@rstudio.com>
Co-authored-by: Eleanor Boyd <eleanorboyd@microsoft.com>
Co-authored-by: dependabot[bot] <49699333+dependabot[bot]@users.noreply.github.com>
Signed-off-by: GitHub <noreply@github.com>
Sign up for free to subscribe to this conversation on GitHub. Already have an account? Sign in.
Labels
area-terminal bug Issue identified by VS Code Team member as probable bug experimenting Feature is part of an experiment needs PR Ready to be worked on verified Verification succeeded
Projects
None yet
Development

Successfully merging a pull request may close this issue.

2 participants