Error tcp://192.168.0.200:502: Exception Response(131, 3, IllegalAddress) #675
-
Have rs485 conection to ess inverter H1 , using wavershare rs4855 to ethernet converter |
Beta Was this translation helpful? Give feedback.
Replies: 3 comments 1 reply
-
I'm assuming the H1 is a G2 ? The integration is failing to read the firmware versions, which suggests that you may be running a very old version of firmware which doesn't support these modbus registers - can your check and copy below your Master, Manager versions please |
Beta Was this translation helpful? Give feedback.
-
Dave
Thanks for replying
the inverter is H1-6.0-E.G2
Master is 1.14
Slave is 1.02
Com is 1.17
… On 12/09/2024 14:47 BST Dave Foster ***@***.***> wrote:
I'm assuming the H1 is a G2 ?
The integration is failing to read the firmware versions, which suggests that you may be running a very old version of firmware which doesn't support these modbus registers - can your check and copy below your Master, Manager versions please
—
Reply to this email directly, view it on GitHub #675 (comment), or unsubscribe https://github.com/notifications/unsubscribe-auth/A5GMWBITWVK7JGCIJU2BUJ3ZWGLPFAVCNFSM6AAAAABOBSKVBGVHI2DSMVQWIX3LMV43URDJONRXK43TNFXW4Q3PNVWWK3TUHMYTANRSGY2TOMI.
You are receiving this because you authored the thread.Message ID: ***@***.***>
|
Beta Was this translation helpful? Give feedback.
-
OK, have allready requested the updateThought it might have been causeRegards And thanksAndrewSent from my Galaxy
-------- Original message --------From: Dave Foster ***@***.***> Date: 12/09/2024 21:00 (GMT+00:00) To: nathanmarlor/foxess_modbus ***@***.***> Cc: Andrewletsdig18 ***@***.***>, Author ***@***.***> Subject: Re: [nathanmarlor/foxess_modbus] Error tcp://192.168.0.200:502: Exception Response(131, 3, IllegalAddress) (Discussion #675)
Ok, those are very old versions and there was quite a big change in the modbus registers on more recent versions - latest are Master 1.27 and Manager 1.44
Can you ask your installer for a firmware update, or email fox service with your inverter serial number - they are usually very quick to respond.
Once updated the integration should connect fine 👍
—Reply to this email directly, view it on GitHub, or unsubscribe.You are receiving this because you authored the thread.Message ID: ***@***.***>
|
Beta Was this translation helpful? Give feedback.
Ok, those are very old versions and there was quite a big change in the modbus registers on more recent versions - latest are Master 1.27 and Manager 1.44
Can you ask your installer for a firmware update, or email fox service with your inverter serial number - they are usually very quick to respond.
Once updated the integration should connect fine 👍