merge with master #10
Commits on Aug 10, 2018
-
Download newer version (8.23.0-2) of rsyslog from jessie-backports in…
… hopes of eliminating memory leaks (#1912)
-
[lldp]: LLDP is misbehaving if netlink messages were lost due to timi…
…ng issue. (#1909) The behavior could be that we are sending LLDP message but not using lldpcli configured properties if netlink delete messages were lost. It also could be that some interfaces do not sending messages at all. "lldpcli show statistics" could see duplicated or missing interfaces. Changes: Upgrade lldpd to 0.9.6 (which introduced the adjustable netlink buffer size) Change the netlink receive buffer size to 1MB
-
[devices]: update submodule platform/nephos/sonic-platform-modules-in…
…grasys from 7181a0 to 796169 (#1910) * Upgrade SAI to v1.2.4 * Add a new supported device accton as7116 * Add maintainer info for deb * Add mk file for accton 7116 * fix some bug for sai 1.2.4 * fix git commit error for sdk and sai * change sai and sdk deb name * add config file for qos support * initial commit * Delete qos.json * Delete buffers.json.j2 * Delete qos.json * Delete buffers.json.j2 * Delete buffers.json.j2 * Delete qos.json * add support for sai 1.3.0 * add qos and buffer file for device and add sensor driver for 7116 * change buffer template * fix fan led bug
-
[Mellanox] Update hw-management service config (#1914)
Signed-off-by: Andriy Moroz <c_andriym@mellanox.com>
Commits on Aug 11, 2018
-
-
-
-
-
-
[baseimage]: Disable consistent network device naming
consistent network device naming is enabled in debian 9 kernel by default
-
-
-
-
-
-
-
-
-
-
[Mellanox]: Upgrade MFT package to 4.8.26 (#3)
This version is compatible with Linux kernel 4.9 Signed-off-by: marian-pritsak <marianp@mellanox.com>
-
[Mellanox]: Update recipe for hw-management (#4)
Update package revision Create submodule for sources Signed-off-by: marian-pritsak <marianp@mellanox.com>
-
-
-
[mellanox]: Adapt to new hw-management package (#12)
Use single start script for all platforms and remove symbolic links Change path to system eeprom Signed-off-by: marian-pritsak <marianp@mellanox.com>
-
-
-
-
-
[Delta]: Modify delta-ag9032v1 driver for kernel 4.9 (#20)
Signed-off-by: neal tai <neal.tai@deltaww.com>
-
-
[build]: build initramfs, libwrap, tacacs packages under stretch docker
initramfs/libwrap/tacacs packages are installed on stretch base image
-
-
[baseimage]: move update initramfs to later stage
some platform drivers install blacklist.conf in /etc/modprobe.d. Those configuration should be proprogated into initramfs to avoid loading those blacklisted driver.
-
[device]: Enable arista drivers for sonic-linux-kernel 4.9 (#21)
* Enable arista drivers * Add vfat ascii charset in initramfs * Update boot0.j2 for 4.9 kernel * Fix i2c offsets in sensors.conf * Bump sonic-platform-modules-arista submodule
-
[device]: add the new platform ag9064 (#23)
Signed-off-by: hans <hans.tseng@deltaww.com>
-
-
[devices]: disable compiling ag9064 and ag5648
Signed-off-by: Guohan Lu <gulv@microsoft.com>
-
[devices]: Modified and fixed delta ag5648 modules. (#30)
* Modified and fixed delta ag5648 modules 1. modified and fixed delta ag5648 modules. 2. enable build ag5648. Signed-off-by: neal tai <neal.tai@deltaww.com> * Enable build ag9064 Signed-off-by: neal tai <neal.tai@deltaww.com>
-
[devices]: modified and fixed delta ag9064 modules (#28)
2. enable build ag9064 Signed-off-by: neal tai <neal.tai@deltaww.com>
-
-
[devices]: disable compiling ag9064 and ag5648
Signed-off-by: Guohan Lu <gulv@microsoft.com>
-
-
-
[delta]: Enable ag5648, et-6248brb, ag9064 and fix the build error of…
… ag5648 PSU module. (#32) * 1. Fixed delta ag5648 PSU modules. 2. Enable build ag5648. Signed-off-by: neal tai <neal.tai@deltaww.com> * 1. Modified the kernel depends for ag5648. 2. Modified platform-modules-ag5648.service for install ag5648. Signed-off-by: neal tai <neal.tai@deltaww.com> * Enable the ag9064. Signed-off-by: Stanley Chi <stanley.chi@deltaww.com> * Add Delta platform et-6248brb Signed-off-by: neal tai <neal.tai@deltaww.com>
-
[devices]: DellEMC new platform support for z9264f - 64x100 (#26)
* Added new platform support DellEMC - Z92264f - 64x100 * Includes changes with Makefiles, sfputil, eeprom and default minigraph * Led support for Z9264f platform * Includes changes on default minigraph * ipmitool implementation in pmon docker. platform_sensors script is inclued in pmon startup
-
[device] Update arista driver submodule (#38)
* [device] Update arista driver submodule * Set Arista scd driver config Set ARISTA_SCD_DRIVER_CONFIG config to build and include scd driver to resulting Arista deb packages
-
[Mellanox]: Update recipe for hw-management (#4)
Update package revision Create submodule for sources Signed-off-by: marian-pritsak <marianp@mellanox.com>
-
-
-
[build]: add .gitignore for cel, delta and inventec
Signed-off-by: Guohan Lu <gulv@microsoft.com>
-
[celestica]: update dx010 fan driver to support fault alarm
Signed-off-by: Guohan Lu <gulv@microsoft.com>
-
[celestica]: Add dx010 gpio sysfs exported when platform modules load.
Signed-off-by: Guohan Lu <gulv@microsoft.com>
-
[devices]: add celstica haliburton
Signed-off-by: Guohan Lu <gulv@microsoft.com>
-
[broadcom]: build broadcom kernel modules from gpl source codes
Signed-off-by: Guohan Lu <gulv@microsoft.com>
-
[devices]: move platform modules of accton, ingrasys, mitac, quanta i…
…nto buildimage repo Signed-off-by: Guohan Lu <gulv@microsoft.com>
-
[mellanox]: Update SDK pointer (#41)
Signed-off-by: Volodymyr Samotiy <volodymyrs@mellanox.com>
-
[mellanox]: Update recipe for hw-mgmt according to latest changes (#40)
Signed-off-by: Volodymyr Samotiy <volodymyrs@mellanox.com>
-
-
[baseimage]: use rsyslog in baseimage from stretch repo
Signed-off-by: Guohan Lu <gulv@microsoft.com>
-
[submodules]: update submodule for platform modules dell, s6000 and k…
…ernel Signed-off-by: Guohan Lu <gulv@microsoft.com>
-
[doc]: update build instruction for debian stretch build
Signed-off-by: Guohan Lu <gulv@microsoft.com>
-
[sshd]: regenerate ssh key if ssh_host_rsa_key is not present
ssh_host_key is removed in debian stretch. Use ssh_host_rsa_key to decide if the host keys are present. Signed-off-by: Guohan Lu <gulv@microsoft.com>
-
[kernel]: set default option to build kernel
Signed-off-by: Guohan Lu <gulv@microsoft.com>
Commits on Aug 12, 2018
-
[dockerbase]: use libwrarp0 7.6.q-26 in docker base
Signed-off-by: Guohan Lu <gulv@microsoft.com>
-
Merge pull request #1335 from lguohan/stretch
[baseimage]: upgrade baseimage to debian stretch
-
[doc]: update build instruction for debian stretch
Signed-off-by: Guohan Lu <gulv@microsoft.com>
-
Fix potential blackholing/looping traffic when link-local was used an…
…d refresh ipv6 neighbor to avoid CPU hit (#1904) * Fix potential blackholing/looping traffic and refresh ipv6 neighbor to avoid CPU hit In case ipv6 global addresses were configured on L3 interfaces and used for peering, and routing protocol was using link-local addresses on the same interfaces as prefered nexthops, the link-local addresses could be aged out after a while due to no activities towards the link-local addresses themselves. And when we receive new routes with the link-local nexthops, SONiC won't insert them to the HW, and thus cause looping or blackholing traffic. Global ipv6 addresses on L3 interfaces between switches are refreshed by BGP keeplive and other messages. On server facing side, traffic may hit fowarding plane only, and no refresh for the ipv6 neighbor entries regularly. This could age-out the linux kernel ipv6 neighbor entries, and HW neighbor table entries could be removed, and thus traffic going to those neighbors would hit CPU, and cause traffic drop and temperary CPU high load. Also, if link-local addresses were not learned, we may not get them at all later. It is intended to fix all above issues. Changes: Add ndisc6 package in swss docker and use it for ipv6 ndp ping to update the neighbors' state on Vlan interfaces Change the default ipv6 neighbor reachable timer to 30mins Add periodical ipv6 multicast ping to ff02::11 to get/refresh link-local neighbor info. * Fix review comments: Add PORTCHANNEL_INTERFACE interface for ipv6 multicast ping format issue * Combine regular L3 interface and portchannel interface for looping * Add ndisc6 package to vs docker
-
[device & platform] led and transceiver deamon for inventec switch d7…
…032 and d7054 (#1678) * [device]: Modify SFPUtil for inventec-d7032 [device]: Add front panel led support for Inventec-d7032 [platform]: Add transceiver monitor daemon for Inventec-d7032 and Inventec-d7054 * [device] follow new porting guide to have broadcom config under device folder * remove license
Commits on Aug 13, 2018
-
-
[barefoot]: build platform modules for bfn, bfn-montara, wnc-osw1800
Signed-off-by: Guohan Lu <gulv@microsoft.com>
-
[build]: create empty /var/lib/docker if needed (#1920)
stretch docker-engine in base image is not started by default in the build process. Need to create empty /var/lib/docker Signed-off-by: Guohan Lu <gulv@microsoft.com>
-
[rsyslog]: use # to separate container name and program name in syslo…
…g message (#1918) Previously use / to separate container name and program name. However, in rsyslogd: Precisely, the programname is terminated by either (whichever occurs first): end of tag nonprintable character ‘:’ ‘[‘ ‘/’ The above definition has been taken from the FreeBSD syslogd sources. Signed-off-by: Guohan Lu <gulv@microsoft.com>
-
[socat]: build socat with readline (#1919)
support readline in bcmsh Signed-off-by: Guohan Lu <gulv@microsoft.com>
-
[platform]: move dell platform modules into buildimage repo
Signed-off-by: Guohan Lu <gulv@microsoft.com>
-
[bcmsh]: add inactivity timeout for bcmsh (default 300 seconds) (#1921)
Signed-off-by: Guohan Lu <gulv@microsoft.com>
Commits on Aug 14, 2018
-
Simplify script to install docker (#1925)
Signed-off-by: Qi Luo <qiluo-msft@users.noreply.github.com>
-
[build]: print error message when use root or sudo to build. (#1923)
Signed-off-by: Guohan Lu <gulv@microsoft.com>
-
[nephos]: build platform modules in debian stretch docker
Signed-off-by: Guohan Lu <gulv@microsoft.com>
-
[submodule update]: sonic-quagga. Add dscp flag settings (#1926)
* sonic-quagga update. Don't spam with 'Vtysh connected from' message * Enable counters inside swss container. systemd is not flexible enough to follow our business rules * Update sonic-quagga
-
[mellanox]: Fix post stop action in swss service template (#1928)
Signed-off-by: Volodymyr Samotiy <volodymyrs@mellanox.com>
-
[Inventec] Add D7264 platform support (#1675)
* Add Inventec D7264 platform support * Fixed util script file permission * Fixed more scripts file permission
-
[mellanox]: Update hw-mgmt service with the stop action (#1929)
Signed-off-by: Volodymyr Samotiy <volodymyrs@mellanox.com>
Commits on Aug 16, 2018
-
Added picocom and pexpect to base image, for use in consutil (#1935)
Signed-off-by: Cayla Wanderman-Milne <t-cawand@microsoft.com>
-
[common]: Update sonic-swss-common submodule (#1934)
Signed-off-by: Shu0T1an ChenG <shuche@microsoft.com>
-
[mellanox]: Fix qos.json.j2: apply qos config for active ports (#1932)
Signed-off-by: Stepan Blyschak <stepanb@mellanox.com>
-
[kernel]: upgrade kernel to 4.9.0-7 (4.9.110-3+deb9u1) (#1922)
-
Allow similar devices configs sharing (#1933)
* Allow similar devices configs sharing Signed-off-by: Stepan Blyschak <stepanb@mellanox.com> * Remove unnecessary cp flags Signed-off-by: Stepan Blyschak <stepanb@mellanox.com> * Remove hw-managment symlink for LS-SN2700 & resolve symlinks during cp Signed-off-by: Stepan Blyschak <stepanb@mellanox.com>
-
[device/dx010] configuration port index start from 1 (#1927)
* update sfputil, port indext start from 1 * DX010 update SKUs port config index Port index in port_config.ini now start from 1. * Seastone-DX010-10-50 port config update * Seastone-DX010-50 port config update * Seastone-DX010 port config update * Update dx010 sfputil plugin * Implement lpmode set function. * Implement transceiver reset function. * Python code style format. * Remove new line at the end of port_config.ini *New line cause parsing error in sfputilbase. * Add get_transceiver_change_event method *This needed by new sfputilbase implement. * Fix unintended line breaks
-
[mellanox]: Fix problem with system EEPROM in "hw-mgmt" (#1938)
Signed-off-by: Volodymyr Samotiy <volodymyrs@mellanox.com>
-
[build]: Makefile: make new step "make stretch" optional (#1936)
* [makefile] Rename Makefile to Makefile.work Signed-off-by: Ying Xie <ying.xie@microsoft.com> * [makefile] Add new make file to avoid extra step * avoiding calling "make stretch" Signed-off-by: Ying Xie <ying.xie@microsoft.com> * [makefile] allow skipping "make stretch" Signed-off-by: Ying Xie <ying.xie@microsoft.com> * [makefile] add all PHONY targets to pass through list Signed-off-by: Ying Xie <ying.xie@microsoft.com>
Commits on Aug 17, 2018
-
[devices/a7050]: Separate ECN/WRED profile per queue to maintain a co…
…nsistent view among CONFIG_DB get commands (#1941) for ecn on/off operations, which are conducted at per queue all interfaces granularity. TODO: Ideally, we should have ECN/WRED profile applied at per interface per queue granularity, and we should do it for all hwskus under the device directory, not just 7050. Signed-off-by: Wenda Ni <wenni@microsoft.com>
-
[broadcom]: fix delay to load led proc init (#1940)
led start bcm cmd triggers link state notifications. This is quick fix to avoid such fake link state notifications. Signed-off-by: Guohan Lu <gulv@microsoft.com>
-
[mlnx-platform] enhancement for xcvrd implementation on mlnx platform (…
…#1937) * mlnx enhancement for xcvrd implementation * fix conflict
-
[baseimage]: install picocom 3.1 in base image (#1943)
* [baseimage]: install picocom 3.1 in base image Signed-off-by: Guohan Lu <gulv@microsoft.com> * add picocom to stretch build Signed-off-by: Guohan Lu <gulv@microsoft.com> * fix slave.mk bug Signed-off-by: Guohan Lu <gulv@microsoft.com>
-
-
[sai]: upgrade SAI to version 1.3.3 (#1944)
* [sai]: upgrade SAI to version 1.3.3 Signed-off-by: Guohan Lu <gulv@microsoft.com> * update mellanox sai
Commits on Aug 18, 2018
-
[baseimage]: Download picocom version 3.1-2 from stretch-backports; N…
…o longer build from source (#1946)
Commits on Aug 20, 2018
-
[mellanox]: Fix system EEPROM for MSN2740 platform (#1950)
Signed-off-by: Volodymyr Samotiy <volodymyrs@mellanox.com>
-
[config-bcm] move broadcom config files to device folder (#1947)
- Future versions of SAI packages will stop carrying these files. Signed-off-by: Ying Xie <ying.xie@microsoft.com>
Commits on Aug 21, 2018
-
[kernel]: upgrade kernel to 4.9.0-7 (4.9.110-3+deb9u2) (#1955)
* [kernel]: upgrade kernel to 4.9.0-7 (4.9.110-3+deb9u2) Signed-off-by: Qi Luo <qiluo-msft@users.noreply.github.com> * Update submodule Signed-off-by: Qi Luo <qiluo-msft@users.noreply.github.com>
-
[baseimage]: Build specific revision of initramfs-tools (#1957)
Signed-off-by: Qi Luo <qiluo-msft@users.noreply.github.com>
-
[utilities]: Update sonic-utilities submodule (#1956)
Signed-off-by: Shu0T1an ChenG <shuche@microsoft.com>
-
[arista]: Fix mount point discovery in boot0 for overlayfs (#1959)
On overlay filesystem the name of the mountpoint will also match in the mount command for overlayfs as upperdir= To prevent detecting the wrong partition we now look for space before. This ensure that we match mountpoint and not devices in df and mount outputs.
-
[vs-test]: support python docker 3.5.0 (#1958)
* [vs-test]: support python docker 3.5.0 Signed-off-by: Guohan Lu <gulv@microsoft.com>
-