This repository contains the elements to generate an embedded system for the FEM-II module.
This repository includes the following projects / directories:
1 - Vivado hardware design for the Enclustra module based on a reference design from Enclusta "Mars_ZX3_Reference_Design_for_FEMII"
2 - The Enclustra build environment "bsp-xilinx" is added as a sub-module (see the readme or website for further information)
3 - A reference design for the V7 on the FEM-II module "Femii-Reference_Design" providing chip-to-chip and basic registers.
use the following commands
1 - clone the repository and submodules
git clone git@github.com:stfc-aeg/fem-ii-embedded-system.git git submodule init git submodule update
2 - build the FEM-II hardware design for the Enclustra module with Xilinx Vivado tools (Mars_ZX3_Reference_Design_for_FEM-II)
3 - Export the design to SDK, create the Device tree and FSBL files
4 - Read the enclustra documentation and decide on you preferred configuration method (SD, QSPI, NAND, TFTP) and build the RFS, KERNEL etc
5 - subsitute the bit, FSBL and device tree files for the ones generated in step 2
6 - genarate the bin configuration file
7 - load onto configuration medium
8 - build the V7 reference design, load the configuration bitstream onto FPGA and or configuration FLASH
9 - power off / on the FEM. plug a USB cable into front and see the enclustra boot 115200 baud
10 - login with root, password root and change password
11 - setup network configuration, DHCP, static etc