[DELETE ME] PR on wrong repo, sorry. #545

oliv3r · 2018-04-06T13:38:28Z

PR on wrong repo, sorry.

The ssd1307fb driver is a little inconsistent in the debug messages. Common is to not capitalize the first letter and to not add any periods etc at the end. Also add a quick shortcut to access the device structure shortening our error messages. Finally take this cleanup opportunity to add the missing device.h header. Signed-off-by: Olliver Schinagl <oliver@schinagl.nl>

When we fail to send messages to our display, we print an error. However this 'spam' can continue heavily and add a heavy load on the system just to print these messages. Lets use the ratelimited variant of dev_err to lessen the system load. Signed-off-by: Olliver Schinagl <oliver@schinagl.nl>

Some minor cleanup to group the fb_info.fix entries together. Signed-off-by: Olliver Schinagl <oliver@schinagl.nl>

THe virtual resolution and line-length are attributes of the X and Y resolution, which are determined by the width/height of the display. Currently it is all directly determined from the width/height parameter. The width and height never change of the display, but the X, Y resolution can change when rotating the display. It thus makes more sense to determine the line length and virtual parameters from their resolution counterparts and not the display dimensions. Signed-off-by: Olliver Schinagl <oliver@schinagl.nl>

The ssd1307fb driver has a few magic values that an happily be moved to some common defines improving readability. Signed-off-by: Olliver Schinagl <oliver@schinagl.nl>

In commit c89eacf ("fbdev: ssd1307fb: Unify init code and obtain hw specific bits from DT") the need for the forward declaration struct ssd1307fb_par was removed with the removal of the init/remove ssd1307fb_ops. Clear up the lingering unused forward declaration. Signed-off-by: Olliver Schinagl <oliver@schinagl.nl>

To support rotation from sysfs, we need to implement set_par at the least. According to the skeletonfb driver the set_par: Again if you can't change the resolution you don't need this function. However, even if your hardware does not support mode changing, a set_par might be needed to at least initialize the hardware to a known working state, especially if it came back from another process that also modifies the same hardware, such as X. Further more, after heavy usage in the last 3 years, we noticed that the scanout related registers can become corrupted by the hardware under certain conditions resulting in shifted scanouts. We thus concluded that we need to re-set the scan-addressing registers after certain operations, such as rotation. This patch thus moves these critical settings from init to set_par. Since we do not need to validate any 'var' parameters, the check_var function has been omitted for now. Signed-off-by: Olliver Schinagl <oliver@schinagl.nl>

Currently, we 'enable' the display in our last step of init. The enable mend of the display however should be the very last step of our probing sequence, e.g. just before saying 'driver loaded successfully', as this is the time we are 'ready'. This patch uses the later introduced ssd1307fb_(un)blank function to achieve this. Further more, we want to guarantee that the display is in its off state during initialization, so after reset, we guarantee that the display is off. Signed-off-by: Olliver Schinagl <oliver@schinagl.nl>

The ssd130x series of chips are very flexible, allowing customers to use any layout to connect the LCD to the PCB. We can use this in combination with the different scan-out parameters to flip and rotate the display at will. E.g. A X and Y flip results in a 180 degree rotation. Changing the scanout from horizontal to vertical rotates by 90 degree's. This thus gives us hardware accelerated rotation support. Signed-off-by: Olliver Schinagl <oliver@schinagl.nl>

The ssd1307fb can in theory support 90 and 270 degree rotations. However this has not been thoroughly tested yet and there is more to it then initially assumed (just changing the scanout to vertical may not be enough). Due to the lack of time to properly research and implement this, only allow 0 and 180 rotations for now. Signed-off-by: Olliver Schinagl <oliver@schinagl.nl>

Commit 6e37682 ("fbdev/ssd1307fb: clear screen in probe") in combination with commit fdde1a8 ("fbdev: ssd1307fb: Make reset gpio devicetree property optiona") changed the previous default behavior of keeping the display active. This for example is a feature that is used to show a splash screen from u-boot and leave it on the controller until linux/an application is ready to show its own information. We thus let the devicetree control this behavior via the no-clear-on-probe flag, which skips the clearing of the framebuffer and thus keeps a splash screen on the device. The default is left to clear the screen (unset in the devicetree) as the new default does make sense. If u-boot does not initialize the screen and does not show a splash-screen garbled displays can occur. Signed-off-by: Olliver Schinagl <oliver@schinagl.nl>

The PCA9570 is the most basic of the pca957x series. It is a 4 bit i2c gpio expander without an interrupt line. Signed-off-by: Olliver Schinagl <oliver@schinagl.nl>

Currently, the driver always successfully manages to load, even if there is no actual chip present (or communication is not possible over i2c). This has the side-effect, that the node is always available in sysfs, and writing data to it which results in i2c errors. To improve behavior here, we try to read the first byte from the device, and if this was okay, we at least know there is some device on the bus, even though we do not know which one. Signed-off-by: Olliver Schinagl <oliver@schinagl.nl>

Re-order headers so they are in alphabetical order. Signed-off-by: Olliver Schinagl <oliver@schinagl.nl>

This patch adds some more defines so that the driver can receive a little more future work. These new defines are then used throughout the existing code the remove some magic values. This patch does not produce any binary changes. Signed-off-by: Olliver Schinagl <oliver@schinagl.nl>

Currently, we blast sleep mode or 0 into the mode1 register, without taking notice of whatever was in it before. Lets be a bit more proper here and read the register and modify only the bit which we are concerned. Signed-off-by: Olliver Schinagl <oliver@schinagl.nl>

Let's improve readability a little bit by reordering initial LED output configuration. Signed-off-by: Olliver Schinagl <oliver@schinagl.nl>

This patch does some whitespace fixing to make the entire driver more consistent, especially with regards to alignment. Because of this it also reduces quite some of the checkpatch warnings. This did came at the cost of some minor 80 char warnings however to satisfy the alignment and improve readability. This patch does not introduce any binary changes. Signed-off-by: Olliver Schinagl <oliver@schinagl.nl>

The PCA963x series of chips have several operating modes controlled via the LEDOUT register. LDR controls whether the leds are completely off (0x0), completely on (0x1), only controlled via the PWM registers (0x2) or a special 'grouped' mode (0x3). In the grouped mode, the leds can either blink, or PWM in synchronization. Since the LED framework currently does not support linked LEDs and thus we cannot PWM in synchronization, set the default group to blink, to ensure that hardware based blinking at least is synchronized when blinking. Signed-off-by: Olliver Schinagl <oliver@schinagl.nl>

The old pwm_config call, did some parameter sanitation such as preventing to change the pwm config if the period is 0. With the new atomic framework, we now not only apply configuration parameters, but also the polarity setting. The polarity setting however can be applied both with an enabled or disabled PWM, in other words, setting the polarity is perfectly acceptable when the period is 0. This patch removes the check if the period is valid and instead, sets the state disabled if the period is 0. It now thus becomes possible to set the polarity, before changing any other PWM parameters. The reason this is needed is that if someone calls pwm_set_polarity with the period set to 0, pwm_set_polarity would fail. Having period of 0 is however perfectly acceptable here. Signed-off-by: Olliver Schinagl <oliver@schinagl.nl>

Signed-off-by: Olliver Schinagl <oliver@schinagl.nl>

The AXP20X driver currently has several masks defined throughout the code. Use nice defines to make them clean and more descriptive. Additionally include bitops.h, which was missing before, and sort headers. Signed-off-by: Olliver Schinagl <oliver@schinagl.nl>

The current axp20x names the ramping register 'scal' which probably means scaling. Since the register really has nothing to do with scaling, but really is the voltage ramp we rename it appropriately. Signed-off-by: Olliver Schinagl <oliver@schinagl.nl>

When a regulator is marked as always on, it is enabled early on, when checking and setting up constraints. It makes the assumption that the bootloader properly initialized the regulator, and just in case enables the regulator anyway. Some constraints however currently get missed, such as the soft-start and ramp-delay. This causes the regulator to be enabled, without the soft-start and ramp-delay being applied, which in turn can cause high-currents or other start-up problems. By moving the always-enabled constraints later in the constraints check, we can at least ensure all constraints for the regulator are followed. Signed-off-by: Olliver Schinagl <oliver@schinagl.nl>

The AXP209 supports ramping up voltages on several regulators such as DCDC2 and LDO3. This patch adds preliminary support for the regulator-ramp-delay property these 2 regulators. Note that the voltage ramp only works when the regulator is already enabled. E.g. when going from say 0.7 V to 3.6 V. When turning on the regulator, no voltage ramp is performed in hardware. What this means, is that if the bootloader brings up the voltage at 0.7 V, the ramp delay property is properly applied. If however, the bootloader leaves the power off, no ramp delay is applied when the power is enabled by the regulator framework. Signed-off-by: Olliver Schinagl <oliver@schinagl.nl>

In the past, there have been words on various lists that if LDO3 is disabled in u-boot, but enabled in the DTS, the axp driver would fail to continue/hang. Several enable/disable patches have been issues to devicetree's in both the kernel and u-boot to address this issue. What really happened however, was that the AXP shuts down, without notice, without setting an interrupt. This is caused when LDO3 gets overloaded, for example with large capacitors on the LDO3 output. Normally, we would expect that the AXP would source 200 mA as per datasheet and set and trigger an interrupt when being overloaded. For some reason however, this does not happen. As a work-around, we use the soft-start constraint of the regulator node to first bring up the LDO3 to the lowest possible voltage and then enable the LDO. After that, we can set the requested voltage as per normal. Combining this setting with the regulator-ramp-delay allows LDO3 to come up slowly and staggered, potentially reducing overall inrush current. Signed-off-by: Olliver Schinagl <oliver@schinagl.nl>

The OLinuXino Lime2 has a big capacitor on its LDO3 output. It is actually too large, causing the PMIC to shutdown when toggling the LDO3. By enabling soft-start and ramp delay we increase the time for the capacitor to charge lowering the current drain on the power regulator. Signed-off-by: Olliver Schinagl <oliver@schinagl.nl>

With commit b43776d ("ARM: dts: sunxi: Use axp209.dtsi for Olinuxino Lime2") we force them an arbitrary 2.8 volts. Granted, for LDO3 this may be less arbitrary, but for LDO4 this is just wrong. In the defense of LDO3, LDO3 is the regulator that feeds port bank E, which has no other purpose then a CSI/TS interface, however the case may still be, that the connected IO may be just as well be 3.3 volts. The big misnomer is however, that the schematic names GPIO-2 pin4 LDO3_2.8V, rather then VDD-CSI0 or similar. This is much worse for LDO4 however, which is not referenced on any pin, is now set to 2.8 volts, but port bank G can also support various other peripherals such as UARTS etc. By having 2.8 volts however for LDO4, we thus now have peripherals that no longer function properly all of the time. Ideally, we want to set a supply voltage for each port bank, but the monolithic nature of the sunxi pinctroller currently prevents this and as such, the board should at least configure the LDO4 with the proper ranges. Until we can set the consumer at the port bank level, a child device-tree has to do something like: &reg_ldo4 { regulator-min-microvolt = <3300000>; regulator-max-microvolt = <3300000>; }; While doing this the same way results in the same solution currently, we force the hack into the final devicetree rather then having it wrong at the board level. Signed-off-by: Olliver Schinagl <oliver@schinagl.nl>

The lradc's analog reference voltage is set to 3.0 volt in the hardware. This is more or less set in copper for at least lradc0. Set the property in the dts to ensure the lradc is referenced properly. Signed-off-by: Olliver Schinagl <oliver@schinagl.nl>

Add the bitops.h header as we need it, alphabetize header order. Signed-off-by: Olliver Schinagl <oliver@schinagl.nl>

Don't mix context flags with function duration info. Instead of this: # tracer: wakeup_rt # # wakeup_rt latency trace v1.1.5 on 5.0.0-rc1-test+ # -------------------------------------------------------------------- # latency: 177 us, torvalds#545/545, CPU#0 | (M:preempt VP:0, KP:0, SP:0 HP:0 #P:8) # ----------------- # | task: migration/0-11 (uid:0 nice:0 policy:1 rt_prio:99) # ----------------- # # _-----=> irqs-off # / _----=> need-resched # | / _---=> hardirq/softirq # || / _--=> preempt-depth # ||| / # REL TIME CPU TASK/PID |||| DURATION FUNCTION CALLS # | | | | |||| | | | | | | 0 us | 0) <idle>-0 | dNh5 | /* 0:120:R + [000] 11: 0:R migration/0 */ 2 us | 0) <idle>-0 | dNh5 0.000 us | (null)(); 4 us | 0) <idle>-0 | dNh4 | _raw_spin_unlock() { 4 us | 0) <idle>-0 | dNh4 0.304 us | preempt_count_sub(); 5 us | 0) <idle>-0 | dNh3 1.063 us | } 5 us | 0) <idle>-0 | dNh3 0.266 us | ttwu_stat(); 6 us | 0) <idle>-0 | dNh3 | _raw_spin_unlock_irqrestore() { 6 us | 0) <idle>-0 | dNh3 0.273 us | preempt_count_sub(); 6 us | 0) <idle>-0 | dNh2 0.818 us | } Show this: # tracer: wakeup # # wakeup latency trace v1.1.5 on 4.20.0+ # -------------------------------------------------------------------- # latency: 593 us, torvalds#674/674, CPU#0 | (M:desktop VP:0, KP:0, SP:0 HP:0 #P:4) # ----------------- # | task: kworker/0:1H-339 (uid:0 nice:-20 policy:0 rt_prio:0) # ----------------- # # _-----=> irqs-off # / _----=> need-resched # | / _---=> hardirq/softirq # || / _--=> preempt-depth # ||| / # REL TIME CPU TASK/PID |||| DURATION FUNCTION CALLS # | | | | |||| | | | | | | 0 us | 0) <idle>-0 | dNs. | | /* 0:120:R + [000] 339:100:R kworker/0:1H */ 3 us | 0) <idle>-0 | dNs. | 0.000 us | (null)(); 67 us | 0) <idle>-0 | dNs. | 0.721 us | ttwu_stat(); 69 us | 0) <idle>-0 | dNs. | 0.607 us | _raw_spin_unlock_irqrestore(); 71 us | 0) <idle>-0 | .Ns. | 0.598 us | _raw_spin_lock_irq(); 72 us | 0) <idle>-0 | .Ns. | 0.584 us | _raw_spin_lock_irq(); 73 us | 0) <idle>-0 | dNs. | + 11.118 us | __next_timer_interrupt(); 75 us | 0) <idle>-0 | dNs. | | call_timer_fn() { 76 us | 0) <idle>-0 | dNs. | | delayed_work_timer_fn() { 76 us | 0) <idle>-0 | dNs. | | __queue_work() { ... Link: http://lkml.kernel.org/r/20190101154614.8887-4-changbin.du@gmail.com Signed-off-by: Changbin Du <changbin.du@gmail.com> Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>

The following warning was observed when attempting to suspend to disk using a USB flash as a swap device. [ 111.779649] ------------[ cut here ]------------ [ 111.788382] URB (____ptrval____) submitted while active [ 111.796646] WARNING: CPU: 3 PID: 365 at drivers/usb/core/urb.c:363 usb_submit_urb+0x3d8/0x590 [ 111.805417] Modules linked in: [ 111.808584] CPU: 3 PID: 365 Comm: kworker/3:2 Not tainted 5.6.0-rc6-00002-gdfd1731f9a3e-dirty torvalds#545 [ 111.817796] Hardware name: ARM Juno development board (r2) (DT) [ 111.823896] Workqueue: usb_hub_wq hub_event [ 111.828217] pstate: 60000005 (nZCv daif -PAN -UAO) [ 111.833156] pc : usb_submit_urb+0x3d8/0x590 [ 111.837471] lr : usb_submit_urb+0x3d8/0x590 [ 111.841783] sp : ffff800018de38b0 [ 111.845205] x29: ffff800018de38b0 x28: 0000000000000003 [ 111.850682] x27: ffff000970530b20 x26: ffff8000133fd000 [ 111.856159] x25: ffff8000133fd000 x24: ffff800018de3b38 [ 111.861635] x23: 0000000000000004 x22: 0000000000000c00 [ 111.867112] x21: 0000000000000000 x20: 00000000fffffff0 [ 111.872589] x19: ffff0009704e7a00 x18: ffffffffffffffff [ 111.878065] x17: 00000000a7c8f4bc x16: 000000002af33de8 [ 111.883542] x15: ffff8000133fda88 x14: 0720072007200720 [ 111.889019] x13: 0720072007200720 x12: 0720072007200720 [ 111.894496] x11: 0000000000000000 x10: 00000000a5286134 [ 111.899973] x9 : 0000000000000002 x8 : ffff000970c837a0 [ 111.905449] x7 : 0000000000000000 x6 : ffff800018de3570 [ 111.910926] x5 : 0000000000000001 x4 : 0000000000000003 [ 111.916401] x3 : 0000000000000000 x2 : ffff800013427118 [ 111.921879] x1 : 9d4e965b4b7d7c00 x0 : 0000000000000000 [ 111.927356] Call trace: [ 111.929892] usb_submit_urb+0x3d8/0x590 [ 111.933852] hub_activate+0x108/0x7f0 [ 111.937633] hub_resume+0xac/0x148 [ 111.941149] usb_resume_interface.isra.10+0x60/0x138 [ 111.946265] usb_resume_both+0xe4/0x140 [ 111.950225] usb_runtime_resume+0x24/0x30 [ 111.954365] __rpm_callback+0xdc/0x138 [ 111.958236] rpm_callback+0x34/0x98 [ 111.961841] rpm_resume+0x4a8/0x720 [ 111.965445] rpm_resume+0x50c/0x720 [ 111.969049] __pm_runtime_resume+0x4c/0xb8 [ 111.973276] usb_autopm_get_interface+0x28/0x60 [ 111.977948] hub_event+0x80/0x16d8 [ 111.981466] process_one_work+0x2a4/0x748 [ 111.985604] worker_thread+0x48/0x498 [ 111.989387] kthread+0x13c/0x140 [ 111.992725] ret_from_fork+0x10/0x18 [ 111.996415] irq event stamp: 354 [ 111.999756] hardirqs last enabled at (353): [<ffff80001019ea1c>] console_unlock+0x504/0x5b8 [ 112.008441] hardirqs last disabled at (354): [<ffff8000100a95d0>] do_debug_exception+0x1a8/0x258 [ 112.017479] softirqs last enabled at (350): [<ffff8000100818a4>] __do_softirq+0x4bc/0x568 [ 112.025984] softirqs last disabled at (343): [<ffff8000101145a4>] irq_exit+0x144/0x150 [ 112.034129] ---[ end trace dc96030b9cf6c8a3 ]--- The problem was tracked down to a missing call to pm_runtime_set_active() on resume in ohci-platform. Link: https://lore.kernel.org/lkml/20200323143857.db5zphxhq4hz3hmd@e107158-lin.cambridge.arm.com/ Acked-by: Alan Stern <stern@rowland.harvard.edu> Signed-off-by: Qais Yousef <qais.yousef@arm.com> CC: Tony Prisk <linux@prisktech.co.nz> CC: Greg Kroah-Hartman <gregkh@linuxfoundation.org> CC: Mathias Nyman <mathias.nyman@intel.com> CC: Oliver Neukum <oneukum@suse.de> CC: linux-arm-kernel@lists.infradead.org CC: linux-usb@vger.kernel.org CC: linux-kernel@vger.kernel.org

The following warning was observed when attempting to suspend to disk using a USB flash as a swap device. [ 111.779649] ------------[ cut here ]------------ [ 111.788382] URB (____ptrval____) submitted while active [ 111.796646] WARNING: CPU: 3 PID: 365 at drivers/usb/core/urb.c:363 usb_submit_urb+0x3d8/0x590 [ 111.805417] Modules linked in: [ 111.808584] CPU: 3 PID: 365 Comm: kworker/3:2 Not tainted 5.6.0-rc6-00002-gdfd1731f9a3e-dirty torvalds#545 [ 111.817796] Hardware name: ARM Juno development board (r2) (DT) [ 111.823896] Workqueue: usb_hub_wq hub_event [ 111.828217] pstate: 60000005 (nZCv daif -PAN -UAO) [ 111.833156] pc : usb_submit_urb+0x3d8/0x590 [ 111.837471] lr : usb_submit_urb+0x3d8/0x590 [ 111.841783] sp : ffff800018de38b0 [ 111.845205] x29: ffff800018de38b0 x28: 0000000000000003 [ 111.850682] x27: ffff000970530b20 x26: ffff8000133fd000 [ 111.856159] x25: ffff8000133fd000 x24: ffff800018de3b38 [ 111.861635] x23: 0000000000000004 x22: 0000000000000c00 [ 111.867112] x21: 0000000000000000 x20: 00000000fffffff0 [ 111.872589] x19: ffff0009704e7a00 x18: ffffffffffffffff [ 111.878065] x17: 00000000a7c8f4bc x16: 000000002af33de8 [ 111.883542] x15: ffff8000133fda88 x14: 0720072007200720 [ 111.889019] x13: 0720072007200720 x12: 0720072007200720 [ 111.894496] x11: 0000000000000000 x10: 00000000a5286134 [ 111.899973] x9 : 0000000000000002 x8 : ffff000970c837a0 [ 111.905449] x7 : 0000000000000000 x6 : ffff800018de3570 [ 111.910926] x5 : 0000000000000001 x4 : 0000000000000003 [ 111.916401] x3 : 0000000000000000 x2 : ffff800013427118 [ 111.921879] x1 : 9d4e965b4b7d7c00 x0 : 0000000000000000 [ 111.927356] Call trace: [ 111.929892] usb_submit_urb+0x3d8/0x590 [ 111.933852] hub_activate+0x108/0x7f0 [ 111.937633] hub_resume+0xac/0x148 [ 111.941149] usb_resume_interface.isra.10+0x60/0x138 [ 111.946265] usb_resume_both+0xe4/0x140 [ 111.950225] usb_runtime_resume+0x24/0x30 [ 111.954365] __rpm_callback+0xdc/0x138 [ 111.958236] rpm_callback+0x34/0x98 [ 111.961841] rpm_resume+0x4a8/0x720 [ 111.965445] rpm_resume+0x50c/0x720 [ 111.969049] __pm_runtime_resume+0x4c/0xb8 [ 111.973276] usb_autopm_get_interface+0x28/0x60 [ 111.977948] hub_event+0x80/0x16d8 [ 111.981466] process_one_work+0x2a4/0x748 [ 111.985604] worker_thread+0x48/0x498 [ 111.989387] kthread+0x13c/0x140 [ 111.992725] ret_from_fork+0x10/0x18 [ 111.996415] irq event stamp: 354 [ 111.999756] hardirqs last enabled at (353): [<ffff80001019ea1c>] console_unlock+0x504/0x5b8 [ 112.008441] hardirqs last disabled at (354): [<ffff8000100a95d0>] do_debug_exception+0x1a8/0x258 [ 112.017479] softirqs last enabled at (350): [<ffff8000100818a4>] __do_softirq+0x4bc/0x568 [ 112.025984] softirqs last disabled at (343): [<ffff8000101145a4>] irq_exit+0x144/0x150 [ 112.034129] ---[ end trace dc96030b9cf6c8a3 ]--- The problem was tracked down to a missing call to pm_runtime_set_active() on resume in ohci-platform. Link: https://lore.kernel.org/lkml/20200323143857.db5zphxhq4hz3hmd@e107158-lin.cambridge.arm.com/ Acked-by: Alan Stern <stern@rowland.harvard.edu> Signed-off-by: Qais Yousef <qais.yousef@arm.com> CC: Tony Prisk <linux@prisktech.co.nz> CC: Greg Kroah-Hartman <gregkh@linuxfoundation.org> CC: Mathias Nyman <mathias.nyman@intel.com> CC: Oliver Neukum <oneukum@suse.de> CC: linux-arm-kernel@lists.infradead.org CC: linux-usb@vger.kernel.org CC: linux-kernel@vger.kernel.org Link: https://lore.kernel.org/r/20200518154931.6144-1-qais.yousef@arm.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

[ Upstream commit 1cb3b00 ] The following warning was observed when attempting to suspend to disk using a USB flash as a swap device. [ 111.779649] ------------[ cut here ]------------ [ 111.788382] URB (____ptrval____) submitted while active [ 111.796646] WARNING: CPU: 3 PID: 365 at drivers/usb/core/urb.c:363 usb_submit_urb+0x3d8/0x590 [ 111.805417] Modules linked in: [ 111.808584] CPU: 3 PID: 365 Comm: kworker/3:2 Not tainted 5.6.0-rc6-00002-gdfd1731f9a3e-dirty torvalds#545 [ 111.817796] Hardware name: ARM Juno development board (r2) (DT) [ 111.823896] Workqueue: usb_hub_wq hub_event [ 111.828217] pstate: 60000005 (nZCv daif -PAN -UAO) [ 111.833156] pc : usb_submit_urb+0x3d8/0x590 [ 111.837471] lr : usb_submit_urb+0x3d8/0x590 [ 111.841783] sp : ffff800018de38b0 [ 111.845205] x29: ffff800018de38b0 x28: 0000000000000003 [ 111.850682] x27: ffff000970530b20 x26: ffff8000133fd000 [ 111.856159] x25: ffff8000133fd000 x24: ffff800018de3b38 [ 111.861635] x23: 0000000000000004 x22: 0000000000000c00 [ 111.867112] x21: 0000000000000000 x20: 00000000fffffff0 [ 111.872589] x19: ffff0009704e7a00 x18: ffffffffffffffff [ 111.878065] x17: 00000000a7c8f4bc x16: 000000002af33de8 [ 111.883542] x15: ffff8000133fda88 x14: 0720072007200720 [ 111.889019] x13: 0720072007200720 x12: 0720072007200720 [ 111.894496] x11: 0000000000000000 x10: 00000000a5286134 [ 111.899973] x9 : 0000000000000002 x8 : ffff000970c837a0 [ 111.905449] x7 : 0000000000000000 x6 : ffff800018de3570 [ 111.910926] x5 : 0000000000000001 x4 : 0000000000000003 [ 111.916401] x3 : 0000000000000000 x2 : ffff800013427118 [ 111.921879] x1 : 9d4e965b4b7d7c00 x0 : 0000000000000000 [ 111.927356] Call trace: [ 111.929892] usb_submit_urb+0x3d8/0x590 [ 111.933852] hub_activate+0x108/0x7f0 [ 111.937633] hub_resume+0xac/0x148 [ 111.941149] usb_resume_interface.isra.10+0x60/0x138 [ 111.946265] usb_resume_both+0xe4/0x140 [ 111.950225] usb_runtime_resume+0x24/0x30 [ 111.954365] __rpm_callback+0xdc/0x138 [ 111.958236] rpm_callback+0x34/0x98 [ 111.961841] rpm_resume+0x4a8/0x720 [ 111.965445] rpm_resume+0x50c/0x720 [ 111.969049] __pm_runtime_resume+0x4c/0xb8 [ 111.973276] usb_autopm_get_interface+0x28/0x60 [ 111.977948] hub_event+0x80/0x16d8 [ 111.981466] process_one_work+0x2a4/0x748 [ 111.985604] worker_thread+0x48/0x498 [ 111.989387] kthread+0x13c/0x140 [ 111.992725] ret_from_fork+0x10/0x18 [ 111.996415] irq event stamp: 354 [ 111.999756] hardirqs last enabled at (353): [<ffff80001019ea1c>] console_unlock+0x504/0x5b8 [ 112.008441] hardirqs last disabled at (354): [<ffff8000100a95d0>] do_debug_exception+0x1a8/0x258 [ 112.017479] softirqs last enabled at (350): [<ffff8000100818a4>] __do_softirq+0x4bc/0x568 [ 112.025984] softirqs last disabled at (343): [<ffff8000101145a4>] irq_exit+0x144/0x150 [ 112.034129] ---[ end trace dc96030b9cf6c8a3 ]--- The problem was tracked down to a missing call to pm_runtime_set_active() on resume in ohci-platform. Link: https://lore.kernel.org/lkml/20200323143857.db5zphxhq4hz3hmd@e107158-lin.cambridge.arm.com/ Acked-by: Alan Stern <stern@rowland.harvard.edu> Signed-off-by: Qais Yousef <qais.yousef@arm.com> CC: Tony Prisk <linux@prisktech.co.nz> CC: Greg Kroah-Hartman <gregkh@linuxfoundation.org> CC: Mathias Nyman <mathias.nyman@intel.com> CC: Oliver Neukum <oneukum@suse.de> CC: linux-arm-kernel@lists.infradead.org CC: linux-usb@vger.kernel.org CC: linux-kernel@vger.kernel.org Link: https://lore.kernel.org/r/20200518154931.6144-1-qais.yousef@arm.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Sasha Levin <sashal@kernel.org>

[ Upstream commit 1cb3b00 ] The following warning was observed when attempting to suspend to disk using a USB flash as a swap device. [ 111.779649] ------------[ cut here ]------------ [ 111.788382] URB (____ptrval____) submitted while active [ 111.796646] WARNING: CPU: 3 PID: 365 at drivers/usb/core/urb.c:363 usb_submit_urb+0x3d8/0x590 [ 111.805417] Modules linked in: [ 111.808584] CPU: 3 PID: 365 Comm: kworker/3:2 Not tainted 5.6.0-rc6-00002-gdfd1731f9a3e-dirty torvalds#545 [ 111.817796] Hardware name: ARM Juno development board (r2) (DT) [ 111.823896] Workqueue: usb_hub_wq hub_event [ 111.828217] pstate: 60000005 (nZCv daif -PAN -UAO) [ 111.833156] pc : usb_submit_urb+0x3d8/0x590 [ 111.837471] lr : usb_submit_urb+0x3d8/0x590 [ 111.841783] sp : ffff800018de38b0 [ 111.845205] x29: ffff800018de38b0 x28: 0000000000000003 [ 111.850682] x27: ffff000970530b20 x26: ffff8000133fd000 [ 111.856159] x25: ffff8000133fd000 x24: ffff800018de3b38 [ 111.861635] x23: 0000000000000004 x22: 0000000000000c00 [ 111.867112] x21: 0000000000000000 x20: 00000000fffffff0 [ 111.872589] x19: ffff0009704e7a00 x18: ffffffffffffffff [ 111.878065] x17: 00000000a7c8f4bc x16: 000000002af33de8 [ 111.883542] x15: ffff8000133fda88 x14: 0720072007200720 [ 111.889019] x13: 0720072007200720 x12: 0720072007200720 [ 111.894496] x11: 0000000000000000 x10: 00000000a5286134 [ 111.899973] x9 : 0000000000000002 x8 : ffff000970c837a0 [ 111.905449] x7 : 0000000000000000 x6 : ffff800018de3570 [ 111.910926] x5 : 0000000000000001 x4 : 0000000000000003 [ 111.916401] x3 : 0000000000000000 x2 : ffff800013427118 [ 111.921879] x1 : 9d4e965b4b7d7c00 x0 : 0000000000000000 [ 111.927356] Call trace: [ 111.929892] usb_submit_urb+0x3d8/0x590 [ 111.933852] hub_activate+0x108/0x7f0 [ 111.937633] hub_resume+0xac/0x148 [ 111.941149] usb_resume_interface.isra.10+0x60/0x138 [ 111.946265] usb_resume_both+0xe4/0x140 [ 111.950225] usb_runtime_resume+0x24/0x30 [ 111.954365] __rpm_callback+0xdc/0x138 [ 111.958236] rpm_callback+0x34/0x98 [ 111.961841] rpm_resume+0x4a8/0x720 [ 111.965445] rpm_resume+0x50c/0x720 [ 111.969049] __pm_runtime_resume+0x4c/0xb8 [ 111.973276] usb_autopm_get_interface+0x28/0x60 [ 111.977948] hub_event+0x80/0x16d8 [ 111.981466] process_one_work+0x2a4/0x748 [ 111.985604] worker_thread+0x48/0x498 [ 111.989387] kthread+0x13c/0x140 [ 111.992725] ret_from_fork+0x10/0x18 [ 111.996415] irq event stamp: 354 [ 111.999756] hardirqs last enabled at (353): [<ffff80001019ea1c>] console_unlock+0x504/0x5b8 [ 112.008441] hardirqs last disabled at (354): [<ffff8000100a95d0>] do_debug_exception+0x1a8/0x258 [ 112.017479] softirqs last enabled at (350): [<ffff8000100818a4>] __do_softirq+0x4bc/0x568 [ 112.025984] softirqs last disabled at (343): [<ffff8000101145a4>] irq_exit+0x144/0x150 [ 112.034129] ---[ end trace dc96030b9cf6c8a3 ]--- The problem was tracked down to a missing call to pm_runtime_set_active() on resume in ohci-platform. Link: https://lore.kernel.org/lkml/20200323143857.db5zphxhq4hz3hmd@e107158-lin.cambridge.arm.com/ Acked-by: Alan Stern <stern@rowland.harvard.edu> Signed-off-by: Qais Yousef <qais.yousef@arm.com> CC: Tony Prisk <linux@prisktech.co.nz> CC: Greg Kroah-Hartman <gregkh@linuxfoundation.org> CC: Mathias Nyman <mathias.nyman@intel.com> CC: Oliver Neukum <oneukum@suse.de> CC: linux-arm-kernel@lists.infradead.org CC: linux-usb@vger.kernel.org CC: linux-kernel@vger.kernel.org Link: https://lore.kernel.org/r/20200518154931.6144-1-qais.yousef@arm.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Sasha Levin <sashal@kernel.org> Signed-off-by: Lee Jones <lee.jones@linaro.org> Change-Id: I13b73a3b3222befa6af0f63df6d030af4dafe144

commit b1cb737 upstream. dvb_frontend_invoke_release() may free the frontend struct. So, the free logic can't update it anymore after calling it. That's OK, as __dvb_frontend_free() is called only when the krefs are zeroed, so nobody is using it anymore. That should fix the following KASAN error: The KASAN report looks like this (running on kernel 3e0cc09 (4.14-rc5+)): ================================================================== BUG: KASAN: use-after-free in __dvb_frontend_free+0x113/0x120 Write of size 8 at addr ffff880067d45a00 by task kworker/0:1/24 CPU: 0 PID: 24 Comm: kworker/0:1 Not tainted 4.14.0-rc5-43687-g06ab8a23e0e6 torvalds#545 Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS Bochs 01/01/2011 Workqueue: usb_hub_wq hub_event Call Trace: __dump_stack lib/dump_stack.c:16 dump_stack+0x292/0x395 lib/dump_stack.c:52 print_address_description+0x78/0x280 mm/kasan/report.c:252 kasan_report_error mm/kasan/report.c:351 kasan_report+0x23d/0x350 mm/kasan/report.c:409 __asan_report_store8_noabort+0x1c/0x20 mm/kasan/report.c:435 __dvb_frontend_free+0x113/0x120 drivers/media/dvb-core/dvb_frontend.c:156 dvb_frontend_put+0x59/0x70 drivers/media/dvb-core/dvb_frontend.c:176 dvb_frontend_detach+0x120/0x150 drivers/media/dvb-core/dvb_frontend.c:2803 dvb_usb_adapter_frontend_exit+0xd6/0x160 drivers/media/usb/dvb-usb/dvb-usb-dvb.c:340 dvb_usb_adapter_exit drivers/media/usb/dvb-usb/dvb-usb-init.c:116 dvb_usb_exit+0x9b/0x200 drivers/media/usb/dvb-usb/dvb-usb-init.c:132 dvb_usb_device_exit+0xa5/0xf0 drivers/media/usb/dvb-usb/dvb-usb-init.c:295 usb_unbind_interface+0x21c/0xa90 drivers/usb/core/driver.c:423 __device_release_driver drivers/base/dd.c:861 device_release_driver_internal+0x4f1/0x5c0 drivers/base/dd.c:893 device_release_driver+0x1e/0x30 drivers/base/dd.c:918 bus_remove_device+0x2f4/0x4b0 drivers/base/bus.c:565 device_del+0x5c4/0xab0 drivers/base/core.c:1985 usb_disable_device+0x1e9/0x680 drivers/usb/core/message.c:1170 usb_disconnect+0x260/0x7a0 drivers/usb/core/hub.c:2124 hub_port_connect drivers/usb/core/hub.c:4754 hub_port_connect_change drivers/usb/core/hub.c:5009 port_event drivers/usb/core/hub.c:5115 hub_event+0x1318/0x3740 drivers/usb/core/hub.c:5195 process_one_work+0xc73/0x1d90 kernel/workqueue.c:2119 worker_thread+0x221/0x1850 kernel/workqueue.c:2253 kthread+0x363/0x440 kernel/kthread.c:231 ret_from_fork+0x2a/0x40 arch/x86/entry/entry_64.S:431 Allocated by task 24: save_stack_trace+0x1b/0x20 arch/x86/kernel/stacktrace.c:59 save_stack+0x43/0xd0 mm/kasan/kasan.c:447 set_track mm/kasan/kasan.c:459 kasan_kmalloc+0xad/0xe0 mm/kasan/kasan.c:551 kmem_cache_alloc_trace+0x11e/0x2d0 mm/slub.c:2772 kmalloc ./include/linux/slab.h:493 kzalloc ./include/linux/slab.h:666 dtt200u_fe_attach+0x4c/0x110 drivers/media/usb/dvb-usb/dtt200u-fe.c:212 dtt200u_frontend_attach+0x35/0x80 drivers/media/usb/dvb-usb/dtt200u.c:136 dvb_usb_adapter_frontend_init+0x32b/0x660 drivers/media/usb/dvb-usb/dvb-usb-dvb.c:286 dvb_usb_adapter_init drivers/media/usb/dvb-usb/dvb-usb-init.c:86 dvb_usb_init drivers/media/usb/dvb-usb/dvb-usb-init.c:162 dvb_usb_device_init+0xf73/0x17f0 drivers/media/usb/dvb-usb/dvb-usb-init.c:277 dtt200u_usb_probe+0xa1/0xe0 drivers/media/usb/dvb-usb/dtt200u.c:155 usb_probe_interface+0x35d/0x8e0 drivers/usb/core/driver.c:361 really_probe drivers/base/dd.c:413 driver_probe_device+0x610/0xa00 drivers/base/dd.c:557 __device_attach_driver+0x230/0x290 drivers/base/dd.c:653 bus_for_each_drv+0x161/0x210 drivers/base/bus.c:463 __device_attach+0x26b/0x3c0 drivers/base/dd.c:710 device_initial_probe+0x1f/0x30 drivers/base/dd.c:757 bus_probe_device+0x1eb/0x290 drivers/base/bus.c:523 device_add+0xd0b/0x1660 drivers/base/core.c:1835 usb_set_configuration+0x104e/0x1870 drivers/usb/core/message.c:1932 generic_probe+0x73/0xe0 drivers/usb/core/generic.c:174 usb_probe_device+0xaf/0xe0 drivers/usb/core/driver.c:266 really_probe drivers/base/dd.c:413 driver_probe_device+0x610/0xa00 drivers/base/dd.c:557 __device_attach_driver+0x230/0x290 drivers/base/dd.c:653 bus_for_each_drv+0x161/0x210 drivers/base/bus.c:463 __device_attach+0x26b/0x3c0 drivers/base/dd.c:710 device_initial_probe+0x1f/0x30 drivers/base/dd.c:757 bus_probe_device+0x1eb/0x290 drivers/base/bus.c:523 device_add+0xd0b/0x1660 drivers/base/core.c:1835 usb_new_device+0x7b8/0x1020 drivers/usb/core/hub.c:2457 hub_port_connect drivers/usb/core/hub.c:4903 hub_port_connect_change drivers/usb/core/hub.c:5009 port_event drivers/usb/core/hub.c:5115 hub_event+0x194d/0x3740 drivers/usb/core/hub.c:5195 process_one_work+0xc73/0x1d90 kernel/workqueue.c:2119 worker_thread+0x221/0x1850 kernel/workqueue.c:2253 kthread+0x363/0x440 kernel/kthread.c:231 ret_from_fork+0x2a/0x40 arch/x86/entry/entry_64.S:431 Freed by task 24: save_stack_trace+0x1b/0x20 arch/x86/kernel/stacktrace.c:59 save_stack+0x43/0xd0 mm/kasan/kasan.c:447 set_track mm/kasan/kasan.c:459 kasan_slab_free+0x72/0xc0 mm/kasan/kasan.c:524 slab_free_hook mm/slub.c:1390 slab_free_freelist_hook mm/slub.c:1412 slab_free mm/slub.c:2988 kfree+0xf6/0x2f0 mm/slub.c:3919 dtt200u_fe_release+0x3c/0x50 drivers/media/usb/dvb-usb/dtt200u-fe.c:202 dvb_frontend_invoke_release.part.13+0x1c/0x30 drivers/media/dvb-core/dvb_frontend.c:2790 dvb_frontend_invoke_release drivers/media/dvb-core/dvb_frontend.c:2789 __dvb_frontend_free+0xad/0x120 drivers/media/dvb-core/dvb_frontend.c:153 dvb_frontend_put+0x59/0x70 drivers/media/dvb-core/dvb_frontend.c:176 dvb_frontend_detach+0x120/0x150 drivers/media/dvb-core/dvb_frontend.c:2803 dvb_usb_adapter_frontend_exit+0xd6/0x160 drivers/media/usb/dvb-usb/dvb-usb-dvb.c:340 dvb_usb_adapter_exit drivers/media/usb/dvb-usb/dvb-usb-init.c:116 dvb_usb_exit+0x9b/0x200 drivers/media/usb/dvb-usb/dvb-usb-init.c:132 dvb_usb_device_exit+0xa5/0xf0 drivers/media/usb/dvb-usb/dvb-usb-init.c:295 usb_unbind_interface+0x21c/0xa90 drivers/usb/core/driver.c:423 __device_release_driver drivers/base/dd.c:861 device_release_driver_internal+0x4f1/0x5c0 drivers/base/dd.c:893 device_release_driver+0x1e/0x30 drivers/base/dd.c:918 bus_remove_device+0x2f4/0x4b0 drivers/base/bus.c:565 device_del+0x5c4/0xab0 drivers/base/core.c:1985 usb_disable_device+0x1e9/0x680 drivers/usb/core/message.c:1170 usb_disconnect+0x260/0x7a0 drivers/usb/core/hub.c:2124 hub_port_connect drivers/usb/core/hub.c:4754 hub_port_connect_change drivers/usb/core/hub.c:5009 port_event drivers/usb/core/hub.c:5115 hub_event+0x1318/0x3740 drivers/usb/core/hub.c:5195 process_one_work+0xc73/0x1d90 kernel/workqueue.c:2119 worker_thread+0x221/0x1850 kernel/workqueue.c:2253 kthread+0x363/0x440 kernel/kthread.c:231 ret_from_fork+0x2a/0x40 arch/x86/entry/entry_64.S:431 The buggy address belongs to the object at ffff880067d45500 which belongs to the cache kmalloc-2048 of size 2048 The buggy address is located 1280 bytes inside of 2048-byte region [ffff880067d45500, ffff880067d45d00) The buggy address belongs to the page: page:ffffea00019f5000 count:1 mapcount:0 mapping: (null) index:0x0 compound_mapcount: 0 flags: 0x100000000008100(slab|head) raw: 0100000000008100 0000000000000000 0000000000000000 00000001000f000f raw: dead000000000100 dead000000000200 ffff88006c002d80 0000000000000000 page dumped because: kasan: bad access detected Memory state around the buggy address: ffff880067d45900: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb ffff880067d45980: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb ffff880067d45a00: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb ^ ffff880067d45a80: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb ffff880067d45b00: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb ================================================================== Fixes: ead6660 ("media: dvb_frontend: only use kref after initialized") Reported-by: Andrey Konovalov <andreyknvl@google.com> Suggested-by: Matthias Schwarzott <zzam@gentoo.org> Tested-by: Andrey Konovalov <andreyknvl@google.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com> Cc: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Corentin hit the following workqueue warning when running with CRYPTO_MANAGER_EXTRA_TESTS: WARNING: CPU: 2 PID: 147 at kernel/workqueue.c:1473 __queue_work+0x3b8/0x3d0 Modules linked in: ghash_generic CPU: 2 PID: 147 Comm: modprobe Not tainted 5.6.0-rc1-next-20200214-00068-g166c9264f0b1-dirty torvalds#545 Hardware name: Pine H64 model A (DT) pc : __queue_work+0x3b8/0x3d0 Call trace: __queue_work+0x3b8/0x3d0 queue_work_on+0x6c/0x90 do_init_module+0x188/0x1f0 load_module+0x1d00/0x22b0 I wasn't able to reproduce on x86 or rpi 3b+. This is WARN_ON(!list_empty(&work->entry)) from __queue_work(), and it happens because the init_free_wq work item isn't initialized in time for a crypto test that requests the gcm module. Some crypto tests were recently moved earlier in boot as explained in commit c4741b2 ("crypto: run initcalls for generic implementations earlier"), which went into mainline less than two weeks before the Fixes commit. Avoid the warning by statically initializing init_free_wq and the corresponding llist. Link: https://lore.kernel.org/lkml/20200217204803.GA13479@Red/ Fixes: 1a7b7d9 ("modules: Use vmalloc special flag") Reported-by: Corentin Labbe <clabbe.montjoie@gmail.com> Tested-by: Corentin Labbe <clabbe.montjoie@gmail.com> Tested-on: sun50i-h6-pine-h64 Tested-on: imx8mn-ddr4-evk Tested-on: sun50i-a64-bananapi-m64 Signed-off-by: Daniel Jordan <daniel.m.jordan@oracle.com>

Corentin hit the following workqueue warning when running with CRYPTO_MANAGER_EXTRA_TESTS: WARNING: CPU: 2 PID: 147 at kernel/workqueue.c:1473 __queue_work+0x3b8/0x3d0 Modules linked in: ghash_generic CPU: 2 PID: 147 Comm: modprobe Not tainted 5.6.0-rc1-next-20200214-00068-g166c9264f0b1-dirty torvalds#545 Hardware name: Pine H64 model A (DT) pc : __queue_work+0x3b8/0x3d0 Call trace: __queue_work+0x3b8/0x3d0 queue_work_on+0x6c/0x90 do_init_module+0x188/0x1f0 load_module+0x1d00/0x22b0 I wasn't able to reproduce on x86 or rpi 3b+. This is WARN_ON(!list_empty(&work->entry)) from __queue_work(), and it happens because the init_free_wq work item isn't initialized in time for a crypto test that requests the gcm module. Some crypto tests were recently moved earlier in boot as explained in commit c4741b2 ("crypto: run initcalls for generic implementations earlier"), which went into mainline less than two weeks before the Fixes commit. Avoid the warning by statically initializing init_free_wq and the corresponding llist. Link: https://lore.kernel.org/lkml/20200217204803.GA13479@Red/ Fixes: 1a7b7d9 ("modules: Use vmalloc special flag") Reported-by: Corentin Labbe <clabbe.montjoie@gmail.com> Tested-by: Corentin Labbe <clabbe.montjoie@gmail.com> Tested-on: sun50i-h6-pine-h64 Tested-on: imx8mn-ddr4-evk Tested-on: sun50i-a64-bananapi-m64 Reviewed-by: Eric Biggers <ebiggers@google.com> Signed-off-by: Daniel Jordan <daniel.m.jordan@oracle.com> Signed-off-by: Jessica Yu <jeyu@kernel.org>

[ Upstream commit fdf09ab ] Corentin hit the following workqueue warning when running with CRYPTO_MANAGER_EXTRA_TESTS: WARNING: CPU: 2 PID: 147 at kernel/workqueue.c:1473 __queue_work+0x3b8/0x3d0 Modules linked in: ghash_generic CPU: 2 PID: 147 Comm: modprobe Not tainted 5.6.0-rc1-next-20200214-00068-g166c9264f0b1-dirty torvalds#545 Hardware name: Pine H64 model A (DT) pc : __queue_work+0x3b8/0x3d0 Call trace: __queue_work+0x3b8/0x3d0 queue_work_on+0x6c/0x90 do_init_module+0x188/0x1f0 load_module+0x1d00/0x22b0 I wasn't able to reproduce on x86 or rpi 3b+. This is WARN_ON(!list_empty(&work->entry)) from __queue_work(), and it happens because the init_free_wq work item isn't initialized in time for a crypto test that requests the gcm module. Some crypto tests were recently moved earlier in boot as explained in commit c4741b2 ("crypto: run initcalls for generic implementations earlier"), which went into mainline less than two weeks before the Fixes commit. Avoid the warning by statically initializing init_free_wq and the corresponding llist. Link: https://lore.kernel.org/lkml/20200217204803.GA13479@Red/ Fixes: 1a7b7d9 ("modules: Use vmalloc special flag") Reported-by: Corentin Labbe <clabbe.montjoie@gmail.com> Tested-by: Corentin Labbe <clabbe.montjoie@gmail.com> Tested-on: sun50i-h6-pine-h64 Tested-on: imx8mn-ddr4-evk Tested-on: sun50i-a64-bananapi-m64 Reviewed-by: Eric Biggers <ebiggers@google.com> Signed-off-by: Daniel Jordan <daniel.m.jordan@oracle.com> Signed-off-by: Jessica Yu <jeyu@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>

BugLink: https://bugs.launchpad.net/bugs/1902137 [ Upstream commit fdf09ab ] Corentin hit the following workqueue warning when running with CRYPTO_MANAGER_EXTRA_TESTS: WARNING: CPU: 2 PID: 147 at kernel/workqueue.c:1473 __queue_work+0x3b8/0x3d0 Modules linked in: ghash_generic CPU: 2 PID: 147 Comm: modprobe Not tainted 5.6.0-rc1-next-20200214-00068-g166c9264f0b1-dirty torvalds#545 Hardware name: Pine H64 model A (DT) pc : __queue_work+0x3b8/0x3d0 Call trace: __queue_work+0x3b8/0x3d0 queue_work_on+0x6c/0x90 do_init_module+0x188/0x1f0 load_module+0x1d00/0x22b0 I wasn't able to reproduce on x86 or rpi 3b+. This is WARN_ON(!list_empty(&work->entry)) from __queue_work(), and it happens because the init_free_wq work item isn't initialized in time for a crypto test that requests the gcm module. Some crypto tests were recently moved earlier in boot as explained in commit c4741b2 ("crypto: run initcalls for generic implementations earlier"), which went into mainline less than two weeks before the Fixes commit. Avoid the warning by statically initializing init_free_wq and the corresponding llist. Link: https://lore.kernel.org/lkml/20200217204803.GA13479@Red/ Fixes: 1a7b7d9 ("modules: Use vmalloc special flag") Reported-by: Corentin Labbe <clabbe.montjoie@gmail.com> Tested-by: Corentin Labbe <clabbe.montjoie@gmail.com> Tested-on: sun50i-h6-pine-h64 Tested-on: imx8mn-ddr4-evk Tested-on: sun50i-a64-bananapi-m64 Reviewed-by: Eric Biggers <ebiggers@google.com> Signed-off-by: Daniel Jordan <daniel.m.jordan@oracle.com> Signed-off-by: Jessica Yu <jeyu@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org> Signed-off-by: Kamal Mostafa <kamal@canonical.com> Signed-off-by: Ian May <ian.may@canonical.com>

This commit fixes the following checkpatch.pl errors: ERROR:POINTER_LOCATION: "foo * bar" should be "foo *bar" torvalds#535: FILE: ./hal/HalBtcOutSrc.h:535: +void EXhalbtcoutsrc_PowerOnSetting(struct BTC_COEXIST * pBtCoexist); ERROR:POINTER_LOCATION: "foo * bar" should be "foo *bar" torvalds#536: FILE: ./hal/HalBtcOutSrc.h:536: +void EXhalbtcoutsrc_InitHwConfig(struct BTC_COEXIST * pBtCoexist, u8 bWifiOnly); ERROR:POINTER_LOCATION: "foo * bar" should be "foo *bar" torvalds#537: FILE: ./hal/HalBtcOutSrc.h:537: +void EXhalbtcoutsrc_InitCoexDm(struct BTC_COEXIST * pBtCoexist); ERROR:POINTER_LOCATION: "foo * bar" should be "foo *bar" torvalds#538: FILE: ./hal/HalBtcOutSrc.h:538: +void EXhalbtcoutsrc_IpsNotify(struct BTC_COEXIST * pBtCoexist, u8 type); ERROR:POINTER_LOCATION: "foo * bar" should be "foo *bar" torvalds#539: FILE: ./hal/HalBtcOutSrc.h:539: +void EXhalbtcoutsrc_LpsNotify(struct BTC_COEXIST * pBtCoexist, u8 type); ERROR:POINTER_LOCATION: "foo * bar" should be "foo *bar" torvalds#540: FILE: ./hal/HalBtcOutSrc.h:540: +void EXhalbtcoutsrc_ScanNotify(struct BTC_COEXIST * pBtCoexist, u8 type); ERROR:POINTER_LOCATION: "foo * bar" should be "foo *bar" torvalds#541: FILE: ./hal/HalBtcOutSrc.h:541: +void EXhalbtcoutsrc_ConnectNotify(struct BTC_COEXIST * pBtCoexist, u8 action); ERROR:POINTER_LOCATION: "foo * bar" should be "foo *bar" torvalds#543: FILE: ./hal/HalBtcOutSrc.h:543: + struct BTC_COEXIST * pBtCoexist, enum RT_MEDIA_STATUS mediaStatus ERROR:POINTER_LOCATION: "foo * bar" should be "foo *bar" torvalds#545: FILE: ./hal/HalBtcOutSrc.h:545: +void EXhalbtcoutsrc_SpecialPacketNotify(struct BTC_COEXIST * pBtCoexist, u8 pktType); ERROR:POINTER_LOCATION: "foo * bar" should be "foo *bar" torvalds#547: FILE: ./hal/HalBtcOutSrc.h:547: + struct BTC_COEXIST * pBtCoexist, u8 *tmpBuf, u8 length ERROR:POINTER_LOCATION: "foo * bar" should be "foo *bar" torvalds#549: FILE: ./hal/HalBtcOutSrc.h:549: +void EXhalbtcoutsrc_HaltNotify(struct BTC_COEXIST * pBtCoexist); ERROR:POINTER_LOCATION: "foo * bar" should be "foo *bar" torvalds#550: FILE: ./hal/HalBtcOutSrc.h:550: +void EXhalbtcoutsrc_PnpNotify(struct BTC_COEXIST * pBtCoexist, u8 pnpState); ERROR:POINTER_LOCATION: "foo * bar" should be "foo *bar" torvalds#551: FILE: ./hal/HalBtcOutSrc.h:551: +void EXhalbtcoutsrc_Periodical(struct BTC_COEXIST * pBtCoexist); ERROR:POINTER_LOCATION: "foo * bar" should be "foo *bar" torvalds#555: FILE: ./hal/HalBtcOutSrc.h:555: +void EXhalbtcoutsrc_DisplayBtCoexInfo(struct BTC_COEXIST * pBtCoexist); Signed-off-by: Marco Cesati <marcocesati@gmail.com>

This commit fixes the following checkpatch.pl errors: ERROR:POINTER_LOCATION: "foo * bar" should be "foo *bar" torvalds#535: FILE: ./hal/HalBtcOutSrc.h:535: +void EXhalbtcoutsrc_PowerOnSetting(struct BTC_COEXIST * pBtCoexist); ERROR:POINTER_LOCATION: "foo * bar" should be "foo *bar" torvalds#536: FILE: ./hal/HalBtcOutSrc.h:536: +void EXhalbtcoutsrc_InitHwConfig(struct BTC_COEXIST * pBtCoexist, u8 bWifiOnly); ERROR:POINTER_LOCATION: "foo * bar" should be "foo *bar" torvalds#537: FILE: ./hal/HalBtcOutSrc.h:537: +void EXhalbtcoutsrc_InitCoexDm(struct BTC_COEXIST * pBtCoexist); ERROR:POINTER_LOCATION: "foo * bar" should be "foo *bar" torvalds#538: FILE: ./hal/HalBtcOutSrc.h:538: +void EXhalbtcoutsrc_IpsNotify(struct BTC_COEXIST * pBtCoexist, u8 type); ERROR:POINTER_LOCATION: "foo * bar" should be "foo *bar" torvalds#539: FILE: ./hal/HalBtcOutSrc.h:539: +void EXhalbtcoutsrc_LpsNotify(struct BTC_COEXIST * pBtCoexist, u8 type); ERROR:POINTER_LOCATION: "foo * bar" should be "foo *bar" torvalds#540: FILE: ./hal/HalBtcOutSrc.h:540: +void EXhalbtcoutsrc_ScanNotify(struct BTC_COEXIST * pBtCoexist, u8 type); ERROR:POINTER_LOCATION: "foo * bar" should be "foo *bar" torvalds#541: FILE: ./hal/HalBtcOutSrc.h:541: +void EXhalbtcoutsrc_ConnectNotify(struct BTC_COEXIST * pBtCoexist, u8 action); ERROR:POINTER_LOCATION: "foo * bar" should be "foo *bar" torvalds#543: FILE: ./hal/HalBtcOutSrc.h:543: + struct BTC_COEXIST * pBtCoexist, enum RT_MEDIA_STATUS mediaStatus ERROR:POINTER_LOCATION: "foo * bar" should be "foo *bar" torvalds#545: FILE: ./hal/HalBtcOutSrc.h:545: +void EXhalbtcoutsrc_SpecialPacketNotify(struct BTC_COEXIST * pBtCoexist, u8 pktType); ERROR:POINTER_LOCATION: "foo * bar" should be "foo *bar" torvalds#547: FILE: ./hal/HalBtcOutSrc.h:547: + struct BTC_COEXIST * pBtCoexist, u8 *tmpBuf, u8 length ERROR:POINTER_LOCATION: "foo * bar" should be "foo *bar" torvalds#549: FILE: ./hal/HalBtcOutSrc.h:549: +void EXhalbtcoutsrc_HaltNotify(struct BTC_COEXIST * pBtCoexist); ERROR:POINTER_LOCATION: "foo * bar" should be "foo *bar" torvalds#550: FILE: ./hal/HalBtcOutSrc.h:550: +void EXhalbtcoutsrc_PnpNotify(struct BTC_COEXIST * pBtCoexist, u8 pnpState); ERROR:POINTER_LOCATION: "foo * bar" should be "foo *bar" torvalds#551: FILE: ./hal/HalBtcOutSrc.h:551: +void EXhalbtcoutsrc_Periodical(struct BTC_COEXIST * pBtCoexist); ERROR:POINTER_LOCATION: "foo * bar" should be "foo *bar" torvalds#555: FILE: ./hal/HalBtcOutSrc.h:555: +void EXhalbtcoutsrc_DisplayBtCoexInfo(struct BTC_COEXIST * pBtCoexist); Reviewed-by: Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by: Marco Cesati <marcocesati@gmail.com> Link: https://lore.kernel.org/r/20210315170618.2566-7-marcocesati@gmail.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

…xt line Fix checkpatch error: ERROR: open brace '{' following function definitions go on the next line torvalds#545: FILE: spi-dln2.c:545: +static int dln2_spi_rdwr(struct dln2_spi *dln2, const u8 *tx_data, + u8 *rx_data, u16 data_len, u8 attr) { Signed-off-by: Jay Fang <f.fangjian@huawei.com> Link: https://lore.kernel.org/r/1616566602-13894-7-git-send-email-f.fangjian@huawei.com Signed-off-by: Mark Brown <broonie@kernel.org>

rust: add support for Amba device drivers.

oliv3r and others added 30 commits April 5, 2018 10:35

fbdev: ssd1307fb: cleanup: Group fb_info.fix

7c6105c

Some minor cleanup to group the fb_info.fix entries together. Signed-off-by: Olliver Schinagl <oliver@schinagl.nl>

fbdev: ssd1307fb: Reduce magic values with defines

b1a1ce2

The ssd1307fb driver has a few magic values that an happily be moved to some common defines improving readability. Signed-off-by: Olliver Schinagl <oliver@schinagl.nl>

gpio: pca953x: add support for the NXP pca9570

1cd397f

The PCA9570 is the most basic of the pca957x series. It is a 4 bit i2c gpio expander without an interrupt line. Signed-off-by: Olliver Schinagl <oliver@schinagl.nl>

leds: pca963x: alphabetize headers

5e9b4e3

Re-order headers so they are in alphabetical order. Signed-off-by: Olliver Schinagl <oliver@schinagl.nl>

leds: pca963x: refactor initial led output a little

00537b8

Let's improve readability a little bit by reordering initial LED output configuration. Signed-off-by: Olliver Schinagl <oliver@schinagl.nl>

rtc: sun6i: add missing header

a3d9801

Signed-off-by: Olliver Schinagl <oliver@schinagl.nl>

mfd: axp20x: fixup includes

4cb76bd

Add the bitops.h header as we need it, alphabetize header order. Signed-off-by: Olliver Schinagl <oliver@schinagl.nl>

ojeda pushed a commit to ojeda/linux that referenced this pull request Nov 24, 2021

Merge pull request torvalds#545 from wedsonaf/amba

0709360

rust: add support for Amba device drivers.

Provide feedback

Saved searches

Use saved searches to filter your results more quickly

[DELETE ME] PR on wrong repo, sorry. #545

[DELETE ME] PR on wrong repo, sorry. #545

oliv3r commented Apr 6, 2018 •

edited

Loading

[DELETE ME] PR on wrong repo, sorry. #545

[DELETE ME] PR on wrong repo, sorry. #545

Conversation

oliv3r commented Apr 6, 2018 • edited Loading

oliv3r commented Apr 6, 2018 •

edited

Loading