Fixed typo in comment #77

kiteflyingmonkey · 2014-03-07T16:20:39Z

Changed "then" to "than"
No functional change

Changed "then" to "than" No functional change

kiteflyingmonkey · 2014-03-07T16:39:10Z

Ok, after submitting this and reading the comments on some of the other pull requests I see that this isn't going to get accepted. I'll try and do it the way suggested here: https://github.com/torvalds/linux/blob/master/Documentation/SubmittingPatches

Do comment typo style fixes get accepted, or do they need to be bundled with something actually useful?

Turn it into (for example): [ 0.073380] x86: Booting SMP configuration: [ 0.074005] .... node #0, CPUs: #1 dtor#2 #3 #4 #5 torvalds#6 torvalds#7 [ 0.603005] .... node #1, CPUs: torvalds#8 torvalds#9 torvalds#10 torvalds#11 torvalds#12 torvalds#13 torvalds#14 torvalds#15 [ 1.200005] .... node dtor#2, CPUs: torvalds#16 torvalds#17 torvalds#18 torvalds#19 torvalds#20 torvalds#21 torvalds#22 torvalds#23 [ 1.796005] .... node #3, CPUs: torvalds#24 torvalds#25 torvalds#26 torvalds#27 torvalds#28 torvalds#29 torvalds#30 torvalds#31 [ 2.393005] .... node #4, CPUs: torvalds#32 torvalds#33 torvalds#34 torvalds#35 torvalds#36 torvalds#37 torvalds#38 torvalds#39 [ 2.996005] .... node #5, CPUs: torvalds#40 torvalds#41 torvalds#42 torvalds#43 torvalds#44 torvalds#45 torvalds#46 torvalds#47 [ 3.600005] .... node torvalds#6, CPUs: torvalds#48 torvalds#49 torvalds#50 torvalds#51 #52 #53 torvalds#54 torvalds#55 [ 4.202005] .... node torvalds#7, CPUs: torvalds#56 torvalds#57 #58 torvalds#59 torvalds#60 torvalds#61 torvalds#62 torvalds#63 [ 4.811005] .... node torvalds#8, CPUs: torvalds#64 torvalds#65 torvalds#66 torvalds#67 torvalds#68 torvalds#69 #70 torvalds#71 [ 5.421006] .... node torvalds#9, CPUs: torvalds#72 torvalds#73 torvalds#74 torvalds#75 torvalds#76 torvalds#77 torvalds#78 torvalds#79 [ 6.032005] .... node torvalds#10, CPUs: torvalds#80 torvalds#81 torvalds#82 torvalds#83 torvalds#84 torvalds#85 torvalds#86 torvalds#87 [ 6.648006] .... node torvalds#11, CPUs: torvalds#88 torvalds#89 torvalds#90 torvalds#91 torvalds#92 torvalds#93 torvalds#94 torvalds#95 [ 7.262005] .... node torvalds#12, CPUs: torvalds#96 torvalds#97 torvalds#98 torvalds#99 torvalds#100 torvalds#101 torvalds#102 torvalds#103 [ 7.865005] .... node torvalds#13, CPUs: torvalds#104 torvalds#105 torvalds#106 torvalds#107 torvalds#108 torvalds#109 torvalds#110 torvalds#111 [ 8.466005] .... node torvalds#14, CPUs: torvalds#112 torvalds#113 torvalds#114 torvalds#115 torvalds#116 torvalds#117 torvalds#118 torvalds#119 [ 9.073006] .... node torvalds#15, CPUs: torvalds#120 torvalds#121 torvalds#122 torvalds#123 torvalds#124 torvalds#125 torvalds#126 torvalds#127 [ 9.679901] x86: Booted up 16 nodes, 128 CPUs and drop useless elements. Change num_digits() to hpa's division-avoiding, cell-phone-typed version which he went at great lengths and pains to submit on a Saturday evening. Signed-off-by: Borislav Petkov <bp@suse.de> Cc: huawei.libin@huawei.com Cc: wangyijing@huawei.com Cc: fenghua.yu@intel.com Cc: guohanjun@huawei.com Cc: paul.gortmaker@windriver.com Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Andrew Morton <akpm@linux-foundation.org> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: Thomas Gleixner <tglx@linutronix.de> Link: http://lkml.kernel.org/r/20130930095624.GB16383@pd.tnic Signed-off-by: Ingo Molnar <mingo@kernel.org>

WARNING: quoted string split across lines torvalds#60: FILE: fs/isofs/compress.c:163: " page idx = %d, bh idx = %d," + " avail_in = %ld," WARNING: quoted string split across lines torvalds#61: FILE: fs/isofs/compress.c:164: + " avail_in = %ld," + " avail_out = %ld\n", WARNING: missing space after return type torvalds#76: FILE: include/linux/decompress/bunzip2.h:5: + long(*fill)(void*, unsigned long), WARNING: missing space after return type torvalds#77: FILE: include/linux/decompress/bunzip2.h:6: + long(*flush)(void*, unsigned long), WARNING: missing space after return type torvalds#94: FILE: include/linux/decompress/generic.h:5: + long(*fill)(void*, unsigned long), WARNING: missing space after return type torvalds#95: FILE: include/linux/decompress/generic.h:6: + long(*flush)(void*, unsigned long), WARNING: missing space after return type torvalds#122: FILE: include/linux/decompress/inflate.h:5: + long(*fill)(void*, unsigned long), WARNING: missing space after return type torvalds#123: FILE: include/linux/decompress/inflate.h:6: + long(*flush)(void*, unsigned long), WARNING: missing space after return type torvalds#140: FILE: include/linux/decompress/unlz4.h:5: + long(*fill)(void*, unsigned long), WARNING: missing space after return type torvalds#141: FILE: include/linux/decompress/unlz4.h:6: + long(*flush)(void*, unsigned long), WARNING: missing space after return type torvalds#158: FILE: include/linux/decompress/unlzma.h:5: + long(*fill)(void*, unsigned long), WARNING: missing space after return type torvalds#159: FILE: include/linux/decompress/unlzma.h:6: + long(*flush)(void*, unsigned long), WARNING: missing space after return type torvalds#177: FILE: include/linux/decompress/unlzo.h:5: + long(*fill)(void*, unsigned long), WARNING: missing space after return type torvalds#178: FILE: include/linux/decompress/unlzo.h:6: + long(*flush)(void*, unsigned long), WARNING: please, no spaces at the start of a line torvalds#210: FILE: include/linux/zlib.h:86: + uLong avail_in; /* number of bytes available at next_in */$ WARNING: please, no spaces at the start of a line torvalds#215: FILE: include/linux/zlib.h:90: + uLong avail_out; /* remaining free space at next_out */$ WARNING: __initdata should be placed after count torvalds#259: FILE: init/initramfs.c:177: +static __initdata unsigned long count; WARNING: __initdata should be placed after remains torvalds#268: FILE: init/initramfs.c:189: +static __initdata long remains; WARNING: missing space after return type torvalds#385: FILE: lib/decompress_bunzip2.c:679: + long(*fill)(void*, unsigned long), WARNING: missing space after return type torvalds#386: FILE: lib/decompress_bunzip2.c:680: + long(*flush)(void*, unsigned long), WARNING: missing space after return type torvalds#401: FILE: lib/decompress_bunzip2.c:747: + long(*fill)(void*, unsigned long), WARNING: missing space after return type torvalds#402: FILE: lib/decompress_bunzip2.c:748: + long(*flush)(void*, unsigned long), WARNING: missing space after return type torvalds#427: FILE: lib/decompress_inflate.c:37: + long(*fill)(void*, unsigned long), WARNING: missing space after return type torvalds#428: FILE: lib/decompress_inflate.c:38: + long(*flush)(void*, unsigned long), WARNING: Unnecessary space before function pointer arguments torvalds#456: FILE: lib/decompress_unlz4.c:35: + long (*fill) (void *, unsigned long), WARNING: Unnecessary space before function pointer arguments torvalds#457: FILE: lib/decompress_unlz4.c:36: + long (*flush) (void *, unsigned long), WARNING: missing space after return type torvalds#479: FILE: lib/decompress_unlz4.c:179: + long(*fill)(void*, unsigned long), WARNING: missing space after return type torvalds#480: FILE: lib/decompress_unlz4.c:180: + long(*flush)(void*, unsigned long), WARNING: missing space after return type torvalds#529: FILE: lib/decompress_unlzma.c:283: + long(*flush)(void*, unsigned long); WARNING: missing space after return type torvalds#541: FILE: lib/decompress_unlzma.c:538: + long(*fill)(void*, unsigned long), WARNING: missing space after return type torvalds#542: FILE: lib/decompress_unlzma.c:539: + long(*flush)(void*, unsigned long), WARNING: missing space after return type torvalds#557: FILE: lib/decompress_unlzma.c:671: + long(*fill)(void*, unsigned long), WARNING: missing space after return type torvalds#558: FILE: lib/decompress_unlzma.c:672: + long(*flush)(void*, unsigned long), WARNING: Unnecessary space before function pointer arguments torvalds#586: FILE: lib/decompress_unlzo.c:112: + long (*fill) (void *, unsigned long), WARNING: Unnecessary space before function pointer arguments torvalds#587: FILE: lib/decompress_unlzo.c:113: + long (*flush) (void *, unsigned long), total: 0 errors, 35 warnings, 479 lines checked ./patches/initramfs-support-initramfs-that-is-more-than-2g.patch has style problems, please review. If any of these errors are false positives, please report them to the maintainer, see CHECKPATCH in MAINTAINERS. Please run checkpatch prior to sending patches Cc: Yinghai Lu <yinghai@kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>

…kpatch-fixes WARNING: Missing a blank line after declarations torvalds#77: FILE: fs/proc/task_mmu.c:246: + int err = PTR_ERR(priv->mm); + seq_release_private(inode, file); total: 0 errors, 1 warnings, 94 lines checked ./patches/fs-proc-task_mmuc-shift-mm_access-from-m_start-to-proc_maps_open.patch has style problems, please review. If any of these errors are false positives, please report them to the maintainer, see CHECKPATCH in MAINTAINERS. Please run checkpatch prior to sending patches Cc: Oleg Nesterov <oleg@redhat.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>

dts: hikey: remove always-on in wlan_en regulator

When using irq_mode=NULL_IRQ_TIMER, blk_start_queue() is called from the hrtimer interrupt. null_request_fn() calls spin_unlock_irq() and this causes the following splat from lockdep since interrupts are being enabled while we're in an interrupt handler. When we're in null_request_fn() we can't know the status of the flags saved before blk_start_queue() was called, but we can use in_irq() to conditionally enable interrupts only if we're not in a hard interrupt in order to handle this case. ------------[ cut here ]------------ WARNING: CPU: 0 PID: 398 at kernel/locking/lockdep.c:2608 trace_hardirqs_on_caller+0x11a/0x1b0() DEBUG_LOCKS_WARN_ON(current->hardirq_context) CPU: 0 PID: 398 Comm: mkfs.ext4 Not tainted 4.4.0-rc6+ torvalds#77 Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS Debian-1.8.2-1 04/01/2014 Call Trace: <IRQ> [<ffffffff8134467c>] dump_stack+0x4e/0x82 [<ffffffff810501e2>] warn_slowpath_common+0x82/0xc0 [<ffffffff81560aac>] ? _raw_spin_unlock_irq+0x2c/0x60 [<ffffffff813da2b0>] ? null_softirq_done_fn+0x30/0x30 [<ffffffff8105026c>] warn_slowpath_fmt+0x4c/0x50 [<ffffffff8109cdaa>] trace_hardirqs_on_caller+0x11a/0x1b0 [<ffffffff8109ce4d>] trace_hardirqs_on+0xd/0x10 [<ffffffff81560aac>] _raw_spin_unlock_irq+0x2c/0x60 [<ffffffff813da31e>] null_request_fn+0x4e/0xb0 [<ffffffff8131dbc3>] __blk_run_queue+0x33/0x40 [<ffffffff8131de1f>] blk_start_queue+0x3f/0x80 [<ffffffff813da277>] end_cmd+0x117/0x120 [<ffffffff813da2c2>] null_cmd_timer_expired+0x12/0x20 [<ffffffff810bbaab>] __hrtimer_run_queues+0x12b/0x4b0 [<ffffffff810bc69f>] hrtimer_interrupt+0xaf/0x1b0 [<ffffffff810361f6>] local_apic_timer_interrupt+0x36/0x60 [<ffffffff81563ced>] smp_apic_timer_interrupt+0x3d/0x50 [<ffffffff8156217c>] apic_timer_interrupt+0x8c/0xa0 <EOI> [<ffffffff81344c9b>] ? fprop_fraction_percpu+0xeb/0x110 [<ffffffff8112bc8f>] ? __wb_calc_thresh+0x2f/0xc0 [<ffffffff8112bc8f>] __wb_calc_thresh+0x2f/0xc0 [<ffffffff8112bb8c>] ? domain_dirty_limits+0x1bc/0x1f0 [<ffffffff8112db85>] balance_dirty_pages_ratelimited+0x6d5/0xfb0 [<ffffffff810b0967>] ? rcu_read_lock_sched_held+0x77/0x90 [<ffffffff811a2c7a>] ? __block_commit_write.isra.1+0x7a/0xb0 [<ffffffff8112224c>] generic_perform_write+0x14c/0x1c0 [<ffffffff81123310>] __generic_file_write_iter+0x190/0x1f0 [<ffffffff811a763b>] blkdev_write_iter+0x7b/0x100 [<ffffffff8116b46a>] __vfs_write+0xaa/0xe0 [<ffffffff8116b875>] vfs_write+0x95/0x100 [<ffffffff81188a6f>] ? __fget_light+0x6f/0x90 [<ffffffff8116c037>] SyS_pwrite64+0x77/0x90 [<ffffffff815613b2>] entry_SYSCALL_64_fastpath+0x12/0x76 ---[ end trace 39b7df36fb237be1 ]--- Signed-off-by: Rabin Vincent <rabin@rab.in>

The DSPS glue calls del_timer_sync() in its musb_platform_disable() implementation, which requires the caller to not hold a lock. But musb_remove() calls musb_platform_disable() will musb->lock held. This could causes spinlock deadlock. So change musb_remove() to call musb_platform_disable() without holds musb->lock. This doesn't impact the musb_platform_disable implementation in other glue drivers. root@am335x-evm:~# modprobe -r musb-dsps [ 126.134879] musb-hdrc musb-hdrc.1: remove, state 1 [ 126.140465] usb usb2: USB disconnect, device number 1 [ 126.146178] usb 2-1: USB disconnect, device number 2 [ 126.416985] musb-hdrc musb-hdrc.1: USB bus 2 deregistered [ 126.423943] [ 126.425525] ====================================================== [ 126.431997] [ INFO: possible circular locking dependency detected ] [ 126.438564] 4.11.0-rc1-00003-g1557f13bca04-dirty torvalds#77 Not tainted [ 126.444852] ------------------------------------------------------- [ 126.451414] modprobe/778 is trying to acquire lock: [ 126.456523] (((&glue->timer))){+.-...}, at: [<c01b8788>] del_timer_sync+0x0/0xd0 [ 126.464403] [ 126.464403] but task is already holding lock: [ 126.470511] (&(&musb->lock)->rlock){-.-...}, at: [<bf30b7f8>] musb_remove+0x50/0x1 30 [musb_hdrc] [ 126.479965] [ 126.479965] which lock already depends on the new lock. [ 126.479965] [ 126.488531] [ 126.488531] the existing dependency chain (in reverse order) is: [ 126.496368] [ 126.496368] -> #1 (&(&musb->lock)->rlock){-.-...}: [ 126.502968] otg_timer+0x80/0xec [musb_dsps] [ 126.507990] call_timer_fn+0xb4/0x390 [ 126.512372] expire_timers+0xf0/0x1fc [ 126.516754] run_timer_softirq+0x80/0x178 [ 126.521511] __do_softirq+0xc4/0x554 [ 126.525802] irq_exit+0xe8/0x158 [ 126.529735] __handle_domain_irq+0x58/0xb8 [ 126.534583] __irq_usr+0x54/0x80 [ 126.538507] [ 126.538507] -> #0 (((&glue->timer))){+.-...}: [ 126.544636] del_timer_sync+0x40/0xd0 [ 126.549066] musb_remove+0x6c/0x130 [musb_hdrc] [ 126.554370] platform_drv_remove+0x24/0x3c [ 126.559206] device_release_driver_internal+0x14c/0x1e0 [ 126.565225] bus_remove_device+0xd8/0x108 [ 126.569970] device_del+0x1e4/0x308 [ 126.574170] platform_device_del+0x24/0x8c [ 126.579006] platform_device_unregister+0xc/0x20 [ 126.584394] dsps_remove+0x14/0x30 [musb_dsps] [ 126.589595] platform_drv_remove+0x24/0x3c [ 126.594432] device_release_driver_internal+0x14c/0x1e0 [ 126.600450] driver_detach+0x38/0x6c [ 126.604740] bus_remove_driver+0x4c/0xa0 [ 126.609407] SyS_delete_module+0x11c/0x1e4 [ 126.614252] __sys_trace_return+0x0/0x10 Fixes: ea2f35c ("usb: musb: Fix sleeping function called from invalid context for hdrc glue") Cc: <stable@vger.kernel.org> #4.9+ Acked-by: Tony Lindgren <tony@atomide.com> Signed-off-by: Bin Liu <b-liu@ti.com>

The DSPS glue calls del_timer_sync() in its musb_platform_disable() implementation, which requires the caller to not hold a lock. But musb_remove() calls musb_platform_disable() will musb->lock held. This could causes spinlock deadlock. So change musb_remove() to call musb_platform_disable() without holds musb->lock. This doesn't impact the musb_platform_disable implementation in other glue drivers. root@am335x-evm:~# modprobe -r musb-dsps [ 126.134879] musb-hdrc musb-hdrc.1: remove, state 1 [ 126.140465] usb usb2: USB disconnect, device number 1 [ 126.146178] usb 2-1: USB disconnect, device number 2 [ 126.416985] musb-hdrc musb-hdrc.1: USB bus 2 deregistered [ 126.423943] [ 126.425525] ====================================================== [ 126.431997] [ INFO: possible circular locking dependency detected ] [ 126.438564] 4.11.0-rc1-00003-g1557f13bca04-dirty #77 Not tainted [ 126.444852] ------------------------------------------------------- [ 126.451414] modprobe/778 is trying to acquire lock: [ 126.456523] (((&glue->timer))){+.-...}, at: [<c01b8788>] del_timer_sync+0x0/0xd0 [ 126.464403] [ 126.464403] but task is already holding lock: [ 126.470511] (&(&musb->lock)->rlock){-.-...}, at: [<bf30b7f8>] musb_remove+0x50/0x1 30 [musb_hdrc] [ 126.479965] [ 126.479965] which lock already depends on the new lock. [ 126.479965] [ 126.488531] [ 126.488531] the existing dependency chain (in reverse order) is: [ 126.496368] [ 126.496368] -> #1 (&(&musb->lock)->rlock){-.-...}: [ 126.502968] otg_timer+0x80/0xec [musb_dsps] [ 126.507990] call_timer_fn+0xb4/0x390 [ 126.512372] expire_timers+0xf0/0x1fc [ 126.516754] run_timer_softirq+0x80/0x178 [ 126.521511] __do_softirq+0xc4/0x554 [ 126.525802] irq_exit+0xe8/0x158 [ 126.529735] __handle_domain_irq+0x58/0xb8 [ 126.534583] __irq_usr+0x54/0x80 [ 126.538507] [ 126.538507] -> #0 (((&glue->timer))){+.-...}: [ 126.544636] del_timer_sync+0x40/0xd0 [ 126.549066] musb_remove+0x6c/0x130 [musb_hdrc] [ 126.554370] platform_drv_remove+0x24/0x3c [ 126.559206] device_release_driver_internal+0x14c/0x1e0 [ 126.565225] bus_remove_device+0xd8/0x108 [ 126.569970] device_del+0x1e4/0x308 [ 126.574170] platform_device_del+0x24/0x8c [ 126.579006] platform_device_unregister+0xc/0x20 [ 126.584394] dsps_remove+0x14/0x30 [musb_dsps] [ 126.589595] platform_drv_remove+0x24/0x3c [ 126.594432] device_release_driver_internal+0x14c/0x1e0 [ 126.600450] driver_detach+0x38/0x6c [ 126.604740] bus_remove_driver+0x4c/0xa0 [ 126.609407] SyS_delete_module+0x11c/0x1e4 [ 126.614252] __sys_trace_return+0x0/0x10 Fixes: ea2f35c ("usb: musb: Fix sleeping function called from invalid context for hdrc glue") Cc: <stable@vger.kernel.org> #4.9+ Acked-by: Tony Lindgren <tony@atomide.com> Signed-off-by: Bin Liu <b-liu@ti.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

commit bc1e215 upstream. The DSPS glue calls del_timer_sync() in its musb_platform_disable() implementation, which requires the caller to not hold a lock. But musb_remove() calls musb_platform_disable() will musb->lock held. This could causes spinlock deadlock. So change musb_remove() to call musb_platform_disable() without holds musb->lock. This doesn't impact the musb_platform_disable implementation in other glue drivers. root@am335x-evm:~# modprobe -r musb-dsps [ 126.134879] musb-hdrc musb-hdrc.1: remove, state 1 [ 126.140465] usb usb2: USB disconnect, device number 1 [ 126.146178] usb 2-1: USB disconnect, device number 2 [ 126.416985] musb-hdrc musb-hdrc.1: USB bus 2 deregistered [ 126.423943] [ 126.425525] ====================================================== [ 126.431997] [ INFO: possible circular locking dependency detected ] [ 126.438564] 4.11.0-rc1-00003-g1557f13bca04-dirty torvalds#77 Not tainted [ 126.444852] ------------------------------------------------------- [ 126.451414] modprobe/778 is trying to acquire lock: [ 126.456523] (((&glue->timer))){+.-...}, at: [<c01b8788>] del_timer_sync+0x0/0xd0 [ 126.464403] [ 126.464403] but task is already holding lock: [ 126.470511] (&(&musb->lock)->rlock){-.-...}, at: [<bf30b7f8>] musb_remove+0x50/0x1 30 [musb_hdrc] [ 126.479965] [ 126.479965] which lock already depends on the new lock. [ 126.479965] [ 126.488531] [ 126.488531] the existing dependency chain (in reverse order) is: [ 126.496368] [ 126.496368] -> #1 (&(&musb->lock)->rlock){-.-...}: [ 126.502968] otg_timer+0x80/0xec [musb_dsps] [ 126.507990] call_timer_fn+0xb4/0x390 [ 126.512372] expire_timers+0xf0/0x1fc [ 126.516754] run_timer_softirq+0x80/0x178 [ 126.521511] __do_softirq+0xc4/0x554 [ 126.525802] irq_exit+0xe8/0x158 [ 126.529735] __handle_domain_irq+0x58/0xb8 [ 126.534583] __irq_usr+0x54/0x80 [ 126.538507] [ 126.538507] -> #0 (((&glue->timer))){+.-...}: [ 126.544636] del_timer_sync+0x40/0xd0 [ 126.549066] musb_remove+0x6c/0x130 [musb_hdrc] [ 126.554370] platform_drv_remove+0x24/0x3c [ 126.559206] device_release_driver_internal+0x14c/0x1e0 [ 126.565225] bus_remove_device+0xd8/0x108 [ 126.569970] device_del+0x1e4/0x308 [ 126.574170] platform_device_del+0x24/0x8c [ 126.579006] platform_device_unregister+0xc/0x20 [ 126.584394] dsps_remove+0x14/0x30 [musb_dsps] [ 126.589595] platform_drv_remove+0x24/0x3c [ 126.594432] device_release_driver_internal+0x14c/0x1e0 [ 126.600450] driver_detach+0x38/0x6c [ 126.604740] bus_remove_driver+0x4c/0xa0 [ 126.609407] SyS_delete_module+0x11c/0x1e4 [ 126.614252] __sys_trace_return+0x0/0x10 Fixes: ea2f35c ("usb: musb: Fix sleeping function called from invalid context for hdrc glue") Acked-by: Tony Lindgren <tony@atomide.com> Signed-off-by: Bin Liu <b-liu@ti.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

BugLink: http://bugs.launchpad.net/bugs/1678930 commit bc1e215 upstream. The DSPS glue calls del_timer_sync() in its musb_platform_disable() implementation, which requires the caller to not hold a lock. But musb_remove() calls musb_platform_disable() will musb->lock held. This could causes spinlock deadlock. So change musb_remove() to call musb_platform_disable() without holds musb->lock. This doesn't impact the musb_platform_disable implementation in other glue drivers. root@am335x-evm:~# modprobe -r musb-dsps [ 126.134879] musb-hdrc musb-hdrc.1: remove, state 1 [ 126.140465] usb usb2: USB disconnect, device number 1 [ 126.146178] usb 2-1: USB disconnect, device number 2 [ 126.416985] musb-hdrc musb-hdrc.1: USB bus 2 deregistered [ 126.423943] [ 126.425525] ====================================================== [ 126.431997] [ INFO: possible circular locking dependency detected ] [ 126.438564] 4.11.0-rc1-00003-g1557f13bca04-dirty torvalds#77 Not tainted [ 126.444852] ------------------------------------------------------- [ 126.451414] modprobe/778 is trying to acquire lock: [ 126.456523] (((&glue->timer))){+.-...}, at: [<c01b8788>] del_timer_sync+0x0/0xd0 [ 126.464403] [ 126.464403] but task is already holding lock: [ 126.470511] (&(&musb->lock)->rlock){-.-...}, at: [<bf30b7f8>] musb_remove+0x50/0x1 30 [musb_hdrc] [ 126.479965] [ 126.479965] which lock already depends on the new lock. [ 126.479965] [ 126.488531] [ 126.488531] the existing dependency chain (in reverse order) is: [ 126.496368] [ 126.496368] -> #1 (&(&musb->lock)->rlock){-.-...}: [ 126.502968] otg_timer+0x80/0xec [musb_dsps] [ 126.507990] call_timer_fn+0xb4/0x390 [ 126.512372] expire_timers+0xf0/0x1fc [ 126.516754] run_timer_softirq+0x80/0x178 [ 126.521511] __do_softirq+0xc4/0x554 [ 126.525802] irq_exit+0xe8/0x158 [ 126.529735] __handle_domain_irq+0x58/0xb8 [ 126.534583] __irq_usr+0x54/0x80 [ 126.538507] [ 126.538507] -> #0 (((&glue->timer))){+.-...}: [ 126.544636] del_timer_sync+0x40/0xd0 [ 126.549066] musb_remove+0x6c/0x130 [musb_hdrc] [ 126.554370] platform_drv_remove+0x24/0x3c [ 126.559206] device_release_driver_internal+0x14c/0x1e0 [ 126.565225] bus_remove_device+0xd8/0x108 [ 126.569970] device_del+0x1e4/0x308 [ 126.574170] platform_device_del+0x24/0x8c [ 126.579006] platform_device_unregister+0xc/0x20 [ 126.584394] dsps_remove+0x14/0x30 [musb_dsps] [ 126.589595] platform_drv_remove+0x24/0x3c [ 126.594432] device_release_driver_internal+0x14c/0x1e0 [ 126.600450] driver_detach+0x38/0x6c [ 126.604740] bus_remove_driver+0x4c/0xa0 [ 126.609407] SyS_delete_module+0x11c/0x1e4 [ 126.614252] __sys_trace_return+0x0/0x10 Fixes: ea2f35c ("usb: musb: Fix sleeping function called from invalid context for hdrc glue") Acked-by: Tony Lindgren <tony@atomide.com> Signed-off-by: Bin Liu <b-liu@ti.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Tim Gardner <tim.gardner@canonical.com>

commit bc1e215 upstream. The DSPS glue calls del_timer_sync() in its musb_platform_disable() implementation, which requires the caller to not hold a lock. But musb_remove() calls musb_platform_disable() will musb->lock held. This could causes spinlock deadlock. So change musb_remove() to call musb_platform_disable() without holds musb->lock. This doesn't impact the musb_platform_disable implementation in other glue drivers. root@am335x-evm:~# modprobe -r musb-dsps [ 126.134879] musb-hdrc musb-hdrc.1: remove, state 1 [ 126.140465] usb usb2: USB disconnect, device number 1 [ 126.146178] usb 2-1: USB disconnect, device number 2 [ 126.416985] musb-hdrc musb-hdrc.1: USB bus 2 deregistered [ 126.423943] [ 126.425525] ====================================================== [ 126.431997] [ INFO: possible circular locking dependency detected ] [ 126.438564] 4.11.0-rc1-00003-g1557f13bca04-dirty torvalds#77 Not tainted [ 126.444852] ------------------------------------------------------- [ 126.451414] modprobe/778 is trying to acquire lock: [ 126.456523] (((&glue->timer))){+.-...}, at: [<c01b8788>] del_timer_sync+0x0/0xd0 [ 126.464403] [ 126.464403] but task is already holding lock: [ 126.470511] (&(&musb->lock)->rlock){-.-...}, at: [<bf30b7f8>] musb_remove+0x50/0x1 30 [musb_hdrc] [ 126.479965] [ 126.479965] which lock already depends on the new lock. [ 126.479965] [ 126.488531] [ 126.488531] the existing dependency chain (in reverse order) is: [ 126.496368] [ 126.496368] -> #1 (&(&musb->lock)->rlock){-.-...}: [ 126.502968] otg_timer+0x80/0xec [musb_dsps] [ 126.507990] call_timer_fn+0xb4/0x390 [ 126.512372] expire_timers+0xf0/0x1fc [ 126.516754] run_timer_softirq+0x80/0x178 [ 126.521511] __do_softirq+0xc4/0x554 [ 126.525802] irq_exit+0xe8/0x158 [ 126.529735] __handle_domain_irq+0x58/0xb8 [ 126.534583] __irq_usr+0x54/0x80 [ 126.538507] [ 126.538507] -> #0 (((&glue->timer))){+.-...}: [ 126.544636] del_timer_sync+0x40/0xd0 [ 126.549066] musb_remove+0x6c/0x130 [musb_hdrc] [ 126.554370] platform_drv_remove+0x24/0x3c [ 126.559206] device_release_driver_internal+0x14c/0x1e0 [ 126.565225] bus_remove_device+0xd8/0x108 [ 126.569970] device_del+0x1e4/0x308 [ 126.574170] platform_device_del+0x24/0x8c [ 126.579006] platform_device_unregister+0xc/0x20 [ 126.584394] dsps_remove+0x14/0x30 [musb_dsps] [ 126.589595] platform_drv_remove+0x24/0x3c [ 126.594432] device_release_driver_internal+0x14c/0x1e0 [ 126.600450] driver_detach+0x38/0x6c [ 126.604740] bus_remove_driver+0x4c/0xa0 [ 126.609407] SyS_delete_module+0x11c/0x1e4 [ 126.614252] __sys_trace_return+0x0/0x10 Fixes: ea2f35c ("usb: musb: Fix sleeping function called from invalid context for hdrc glue") Acked-by: Tony Lindgren <tony@atomide.com> Signed-off-by: Bin Liu <b-liu@ti.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

ERROR: Please use git commit description style 'commit <12+ chars of sha1> ("<title line>")' - ie: 'commit 0123456789ab ("commit description")' torvalds#14: 03f5956 ("ipc: add sysctl to specify desired next object id"). WARNING: macros should not use a trailing semicolon torvalds#75: FILE: ipc/util.c:224: +#define ipc_idr_alloc(ids, new) \ + idr_alloc(&(ids)->ipcs_idr, (new), \ + (ids)->next_id < 0 ? 0: ipcid_to_idx((ids)->next_id), \ + 0, GFP_NOWAIT); ERROR: spaces required around that ':' (ctx:VxW) torvalds#77: FILE: ipc/util.c:226: + (ids)->next_id < 0 ? 0: ipcid_to_idx((ids)->next_id), \ ^ WARNING: macros should not use a trailing semicolon torvalds#96: FILE: ipc/util.c:245: +#define ipc_idr_alloc(ids, new) \ + idr_alloc(&(ids)->ipcs_idr, (new), 0, 0, GFP_NOWAIT); total: 2 errors, 2 warnings, 117 lines checked NOTE: For some of the reported defects, checkpatch may be able to mechanically convert to the typical style using --fix or --fix-inplace. ./patches/sysvipc-unteach-ids-next_id-for-checkpoint_restore.patch has style problems, please review. NOTE: If any of the errors are false positives, please report them to the maintainer, see CHECKPATCH in MAINTAINERS. Please run checkpatch prior to sending patches Cc: Davidlohr Bueso <dave@stgolabs.net> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>

ERROR: Please use git commit description style 'commit <12+ chars of sha1> ("<title line>")' - ie: 'commit 0123456789ab ("commit description")' torvalds#14: 03f5956 ("ipc: add sysctl to specify desired next object id"). WARNING: macros should not use a trailing semicolon torvalds#75: FILE: ipc/util.c:224: +#define ipc_idr_alloc(ids, new) \ + idr_alloc(&(ids)->ipcs_idr, (new), \ + (ids)->next_id < 0 ? 0: ipcid_to_idx((ids)->next_id), \ + 0, GFP_NOWAIT); ERROR: spaces required around that ':' (ctx:VxW) torvalds#77: FILE: ipc/util.c:226: + (ids)->next_id < 0 ? 0: ipcid_to_idx((ids)->next_id), \ ^ WARNING: macros should not use a trailing semicolon torvalds#96: FILE: ipc/util.c:245: +#define ipc_idr_alloc(ids, new) \ + idr_alloc(&(ids)->ipcs_idr, (new), 0, 0, GFP_NOWAIT); total: 2 errors, 2 warnings, 117 lines checked NOTE: For some of the reported defects, checkpatch may be able to mechanically convert to the typical style using --fix or --fix-inplace. ./patches/sysvipc-unteach-ids-next_id-for-checkpoint_restore.patch has style problems, please review. NOTE: If any of the errors are false positives, please report them to the maintainer, see CHECKPATCH in MAINTAINERS. Please run checkpatch prior to sending patches Cc: Davidlohr Bueso <dave@stgolabs.net> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Mark Brown <broonie@kernel.org>

ERROR: Please use git commit description style 'commit <12+ chars of sha1> ("<title line>")' - ie: 'commit 0123456789ab ("commit description")' torvalds#14: 03f5956 ("ipc: add sysctl to specify desired next object id"). WARNING: macros should not use a trailing semicolon torvalds#75: FILE: ipc/util.c:224: +#define ipc_idr_alloc(ids, new) \ + idr_alloc(&(ids)->ipcs_idr, (new), \ + (ids)->next_id < 0 ? 0: ipcid_to_idx((ids)->next_id), \ + 0, GFP_NOWAIT); ERROR: spaces required around that ':' (ctx:VxW) torvalds#77: FILE: ipc/util.c:226: + (ids)->next_id < 0 ? 0: ipcid_to_idx((ids)->next_id), \ ^ WARNING: macros should not use a trailing semicolon torvalds#96: FILE: ipc/util.c:245: +#define ipc_idr_alloc(ids, new) \ + idr_alloc(&(ids)->ipcs_idr, (new), 0, 0, GFP_NOWAIT); total: 2 errors, 2 warnings, 117 lines checked NOTE: For some of the reported defects, checkpatch may be able to mechanically convert to the typical style using --fix or --fix-inplace. ./patches/sysvipc-unteach-ids-next_id-for-checkpoint_restore.patch has style problems, please review. NOTE: If any of the errors are false positives, please report them to the maintainer, see CHECKPATCH in MAINTAINERS. Please run checkpatch prior to sending patches Cc: Davidlohr Bueso <dave@stgolabs.net> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>

ERROR: Please use git commit description style 'commit <12+ chars of sha1> ("<title line>")' - ie: 'commit 0123456789ab ("commit description")' torvalds#14: 03f5956 ("ipc: add sysctl to specify desired next object id"). WARNING: macros should not use a trailing semicolon torvalds#75: FILE: ipc/util.c:224: +#define ipc_idr_alloc(ids, new) \ + idr_alloc(&(ids)->ipcs_idr, (new), \ + (ids)->next_id < 0 ? 0: ipcid_to_idx((ids)->next_id), \ + 0, GFP_NOWAIT); ERROR: spaces required around that ':' (ctx:VxW) torvalds#77: FILE: ipc/util.c:226: + (ids)->next_id < 0 ? 0: ipcid_to_idx((ids)->next_id), \ ^ WARNING: macros should not use a trailing semicolon torvalds#96: FILE: ipc/util.c:245: +#define ipc_idr_alloc(ids, new) \ + idr_alloc(&(ids)->ipcs_idr, (new), 0, 0, GFP_NOWAIT); total: 2 errors, 2 warnings, 117 lines checked NOTE: For some of the reported defects, checkpatch may be able to mechanically convert to the typical style using --fix or --fix-inplace. ./patches/sysvipc-unteach-ids-next_id-for-checkpoint_restore.patch has style problems, please review. NOTE: If any of the errors are false positives, please report them to the maintainer, see CHECKPATCH in MAINTAINERS. Please run checkpatch prior to sending patches Cc: Davidlohr Bueso <dave@stgolabs.net> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Stephen Rothwell <sfr@canb.auug.org.au>

The toplogy update is performed by the AP via smp_callin() after the BSP has called do_wait_cpu_initialized(), setting the AP's bit in cpu_callout_mask to allow it to proceed. In preparation to enable further parallelism of AP bringup, add locking to serialize the update even if multiple APs are (in future) permitted to proceed through the next stages of bringup in parallel. Without such ordering (and with that future extra parallelism), confusion ensues: [ 1.360149] x86: Booting SMP configuration: [ 1.360221] .... node #0, CPUs: #1 #2 #3 #4 #5 torvalds#6 torvalds#7 torvalds#8 torvalds#9 torvalds#10 torvalds#11 torvalds#12 torvalds#13 torvalds#14 torvalds#15 torvalds#16 torvalds#17 torvalds#18 torvalds#19 torvalds#20 torvalds#21 torvalds#22 torvalds#23 [ 1.366225] .... node #1, CPUs: torvalds#24 torvalds#25 torvalds#26 torvalds#27 torvalds#28 torvalds#29 torvalds#30 torvalds#31 torvalds#32 torvalds#33 torvalds#34 torvalds#35 torvalds#36 torvalds#37 torvalds#38 torvalds#39 torvalds#40 torvalds#41 torvalds#42 torvalds#43 torvalds#44 torvalds#45 torvalds#46 torvalds#47 [ 1.370219] .... node #0, CPUs: torvalds#48 torvalds#49 torvalds#50 torvalds#51 #52 #53 torvalds#54 torvalds#55 torvalds#56 torvalds#57 #58 torvalds#59 torvalds#60 torvalds#61 torvalds#62 torvalds#63 torvalds#64 torvalds#65 torvalds#66 torvalds#67 torvalds#68 torvalds#69 #70 torvalds#71 [ 1.378226] .... node #1, CPUs: torvalds#72 torvalds#73 torvalds#74 torvalds#75 torvalds#76 torvalds#77 torvalds#78 torvalds#79 torvalds#80 torvalds#81 torvalds#82 torvalds#83 torvalds#84 torvalds#85 torvalds#86 torvalds#87 torvalds#88 torvalds#89 torvalds#90 torvalds#91 torvalds#92 torvalds#93 torvalds#94 torvalds#95 [ 1.382037] Brought 96 CPUs to x86/cpu:kick in 72232606 cycles [ 0.104104] smpboot: CPU 26 Converting physical 0 to logical die 1 [ 0.104104] smpboot: CPU 27 Converting physical 1 to logical package 2 [ 0.104104] smpboot: CPU 24 Converting physical 1 to logical package 3 [ 0.104104] smpboot: CPU 27 Converting physical 0 to logical die 2 [ 0.104104] smpboot: CPU 25 Converting physical 1 to logical package 4 [ 1.385609] Brought 96 CPUs to x86/cpu:wait-init in 9269218 cycles [ 1.395285] Brought CPUs online in 28930764 cycles [ 1.395469] smp: Brought up 2 nodes, 96 CPUs [ 1.395689] smpboot: Max logical packages: 2 [ 1.396222] smpboot: Total of 96 processors activated (576000.00 BogoMIPS) [Usama Arif: fixed rebase conflict] Signed-off-by: David Woodhouse <dwmw@amazon.co.uk> Signed-off-by: Usama Arif <usama.arif@bytedance.com> Signed-off-by: Paul E. McKenney <paulmck@kernel.org>

The toplogy update is performed by the AP via smp_callin() after the BSP has called do_wait_cpu_initialized(), setting the AP's bit in cpu_callout_mask to allow it to proceed. In preparation to enable further parallelism of AP bringup, add locking to serialize the update even if multiple APs are (in future) permitted to proceed through the next stages of bringup in parallel. Without such ordering (and with that future extra parallelism), confusion ensues: [ 1.360149] x86: Booting SMP configuration: [ 1.360221] .... node #0, CPUs: #1 #2 #3 #4 #5 torvalds#6 torvalds#7 torvalds#8 torvalds#9 torvalds#10 torvalds#11 torvalds#12 torvalds#13 torvalds#14 torvalds#15 torvalds#16 torvalds#17 torvalds#18 torvalds#19 torvalds#20 torvalds#21 torvalds#22 torvalds#23 [ 1.366225] .... node #1, CPUs: torvalds#24 torvalds#25 torvalds#26 torvalds#27 torvalds#28 torvalds#29 torvalds#30 torvalds#31 torvalds#32 torvalds#33 torvalds#34 torvalds#35 torvalds#36 torvalds#37 torvalds#38 torvalds#39 torvalds#40 torvalds#41 torvalds#42 torvalds#43 torvalds#44 torvalds#45 torvalds#46 torvalds#47 [ 1.370219] .... node #0, CPUs: torvalds#48 torvalds#49 torvalds#50 torvalds#51 #52 #53 torvalds#54 torvalds#55 torvalds#56 torvalds#57 #58 torvalds#59 torvalds#60 torvalds#61 torvalds#62 torvalds#63 torvalds#64 torvalds#65 torvalds#66 torvalds#67 torvalds#68 torvalds#69 #70 torvalds#71 [ 1.378226] .... node #1, CPUs: torvalds#72 torvalds#73 torvalds#74 torvalds#75 torvalds#76 torvalds#77 torvalds#78 torvalds#79 torvalds#80 torvalds#81 torvalds#82 torvalds#83 torvalds#84 torvalds#85 torvalds#86 torvalds#87 torvalds#88 torvalds#89 torvalds#90 torvalds#91 torvalds#92 torvalds#93 torvalds#94 torvalds#95 [ 1.382037] Brought 96 CPUs to x86/cpu:kick in 72232606 cycles [ 0.104104] smpboot: CPU 26 Converting physical 0 to logical die 1 [ 0.104104] smpboot: CPU 27 Converting physical 1 to logical package 2 [ 0.104104] smpboot: CPU 24 Converting physical 1 to logical package 3 [ 0.104104] smpboot: CPU 27 Converting physical 0 to logical die 2 [ 0.104104] smpboot: CPU 25 Converting physical 1 to logical package 4 [ 1.385609] Brought 96 CPUs to x86/cpu:wait-init in 9269218 cycles [ 1.395285] Brought CPUs online in 28930764 cycles [ 1.395469] smp: Brought up 2 nodes, 96 CPUs [ 1.395689] smpboot: Max logical packages: 2 [ 1.396222] smpboot: Total of 96 processors activated (576000.00 BogoMIPS) [Usama Arif: fixed rebase conflict] Signed-off-by: David Woodhouse <dwmw@amazon.co.uk> Signed-off-by: Usama Arif <usama.arif@bytedance.com>

Inject fault while probing kunit-test.ko, the below null-ptr-deref occurs. In kunit_run_case_catch_errors(), if the first kunit_try_catch_run() fails in kthread_run(), the kunit_try_run_case() will not run, so the kunit_resource_test_init() and kunit_resource_test_cases() will not run. And if the second call of kunit_try_catch_run() succeeds, it will call kunit_resource_test_exit(), but the test->priv is NULL, call kunit_cleanup() will cause below null-ptr-deref. So just return the error code if the first kunit_try_catch_run() fails. BUG: KASAN: null-ptr-deref in _raw_spin_lock_irqsave+0x7e/0xe0 Write of size 4 at addr 0000000000000054 by task kunit_try_catch/10476 CPU: 2 PID: 10476 Comm: kunit_try_catch Tainted: G W N 6.6.0-rc1+ torvalds#77 Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.13.0-1ubuntu1.1 04/01/2014 Call Trace: <TASK> dump_stack_lvl+0x33/0x50 print_report+0x3e5/0x600 ? dequeue_entity+0x3c1/0x11e0 ? rcu_trc_cmpxchg_need_qs+0x5e/0xa0 ? _raw_spin_lock_irqsave+0x7e/0xe0 kasan_report+0x90/0xc0 ? _raw_spin_lock_irqsave+0x7e/0xe0 kasan_check_range+0xe9/0x190 _raw_spin_lock_irqsave+0x7e/0xe0 ? _raw_read_lock_bh+0x40/0x40 ? _raw_spin_lock_irqsave+0x8d/0xe0 kunit_cleanup+0x77/0x110 kunit_resource_test_exit+0x2c/0x50 [kunit_test] ? __kthread_parkme+0x8b/0x160 kunit_try_run_case_cleanup+0xac/0xe0 ? kunit_cleanup+0x110/0x110 kunit_generic_run_threadfn_adapter+0x4a/0x90 ? kunit_try_catch_throw+0x80/0x80 kthread+0x2b6/0x380 ? kthread_complete_and_exit+0x20/0x20 ret_from_fork+0x2d/0x70 ? kthread_complete_and_exit+0x20/0x20 ret_from_fork_asm+0x11/0x20 </TASK> ================================================================== Disabling lock debugging due to kernel taint BUG: kernel NULL pointer dereference, address: 0000000000000054 #PF: supervisor write access in kernel mode #PF: error_code(0x0002) - not-present page PGD 0 P4D 0 Oops: 0002 [#1] PREEMPT SMP KASAN CPU: 2 PID: 10476 Comm: kunit_try_catch Tainted: G B W N 6.6.0-rc1+ torvalds#77 Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.13.0-1ubuntu1.1 04/01/2014 RIP: 0010:_raw_spin_lock_irqsave+0x96/0xe0 Code: 00 00 48 89 ef c7 44 24 20 00 00 00 00 e8 c2 02 88 fd be 04 00 00 00 48 8d 7c 24 20 e8 b3 02 88 fd ba 01 00 00 00 8b 44 24 20 <f0> 0f b1 55 00 75 2e 48 b8 00 00 00 00 00 fc ff df 48 c7 04 03 00 RSP: 0018:ffff888108d07de0 EFLAGS: 00010097 RAX: 0000000000000000 RBX: 1ffff110211a0fbc RCX: ffffffff840a0c9d RDX: 0000000000000001 RSI: 0000000000000004 RDI: ffff888108d07e00 RBP: 0000000000000054 R08: ffffed10211a0fc0 R09: ffffed10211a0fc1 R10: ffffed10211a0fc0 R11: 0000000000000003 R12: 0000000000000246 R13: dffffc0000000000 R14: ffff88810dbdf590 R15: 0000000000000054 FS: 0000000000000000(0000) GS:ffff888119f00000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 0000000000000054 CR3: 0000000107a31002 CR4: 0000000000170ee0 DR0: ffffffff8faefce8 DR1: ffffffff8faefce9 DR2: ffffffff8faefcea DR3: ffffffff8faefceb DR6: 00000000ffff0ff0 DR7: 0000000000000600 Call Trace: <TASK> ? __die_body+0x1b/0x60 ? page_fault_oops+0x238/0x760 ? page_fault_oops+0x760/0x760 ? spurious_kernel_fault+0x2d0/0x2d0 ? search_bpf_extables+0x134/0x190 ? fixup_exception+0x4a/0xa20 ? do_user_addr_fault+0xaa/0x1180 ? exc_page_fault+0x5a/0xd0 ? asm_exc_page_fault+0x22/0x30 ? _raw_spin_lock_irqsave+0x8d/0xe0 ? _raw_spin_lock_irqsave+0x96/0xe0 ? _raw_read_lock_bh+0x40/0x40 ? _raw_spin_lock_irqsave+0x8d/0xe0 kunit_cleanup+0x77/0x110 kunit_resource_test_exit+0x2c/0x50 [kunit_test] ? __kthread_parkme+0x8b/0x160 kunit_try_run_case_cleanup+0xac/0xe0 ? kunit_cleanup+0x110/0x110 kunit_generic_run_threadfn_adapter+0x4a/0x90 ? kunit_try_catch_throw+0x80/0x80 kthread+0x2b6/0x380 ? kthread_complete_and_exit+0x20/0x20 ret_from_fork+0x2d/0x70 ? kthread_complete_and_exit+0x20/0x20 ret_from_fork_asm+0x11/0x20 </TASK> Modules linked in: kunit_test(+) [last unloaded: kunit_test] Dumping ftrace buffer: (ftrace buffer empty) CR2: 0000000000000054 ---[ end trace 0000000000000000 ]--- RIP: 0010:_raw_spin_lock_irqsave+0x96/0xe0 Code: 00 00 48 89 ef c7 44 24 20 00 00 00 00 e8 c2 02 88 fd be 04 00 00 00 48 8d 7c 24 20 e8 b3 02 88 fd ba 01 00 00 00 8b 44 24 20 <f0> 0f b1 55 00 75 2e 48 b8 00 00 00 00 00 fc ff df 48 c7 04 03 00 RSP: 0018:ffff888108d07de0 EFLAGS: 00010097 RAX: 0000000000000000 RBX: 1ffff110211a0fbc RCX: ffffffff840a0c9d RDX: 0000000000000001 RSI: 0000000000000004 RDI: ffff888108d07e00 RBP: 0000000000000054 R08: ffffed10211a0fc0 R09: ffffed10211a0fc1 R10: ffffed10211a0fc0 R11: 0000000000000003 R12: 0000000000000246 R13: dffffc0000000000 R14: ffff88810dbdf590 R15: 0000000000000054 FS: 0000000000000000(0000) GS:ffff888119f00000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 0000000000000054 CR3: 0000000107a31002 CR4: 0000000000170ee0 DR0: ffffffff8faefce8 DR1: ffffffff8faefce9 DR2: ffffffff8faefcea DR3: ffffffff8faefceb DR6: 00000000ffff0ff0 DR7: 0000000000000600 Kernel panic - not syncing: Fatal exception Dumping ftrace buffer: (ftrace buffer empty) Kernel Offset: disabled Rebooting in 1 seconds.. Fixes: 55e8c1b ("kunit: Always run cleanup from a test kthread") Signed-off-by: Jinjie Ruan <ruanjinjie@huawei.com>

…oup() Erhard reported that the 6.7-rc1 kernel panics on boot if being built with clang-16. The problem was not reproducible with gcc. [ 5.975049] general protection fault, probably for non-canonical address 0xf555515555555557: 0000 [#1] SMP KASAN PTI [ 5.976422] KASAN: maybe wild-memory-access in range [0xaaaaaaaaaaaaaab8-0xaaaaaaaaaaaaaabf] [ 5.977475] CPU: 3 PID: 1 Comm: systemd Not tainted 6.7.0-rc1-Zen3 torvalds#77 [ 5.977860] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.13.0-1ubuntu1.1 04/01/2014 [ 5.977860] RIP: 0010:obj_cgroup_charge_pages+0x27/0x2d5 [ 5.977860] Code: 90 90 90 55 41 57 41 56 41 55 41 54 53 89 d5 41 89 f6 49 89 ff 48 b8 00 00 00 00 00 fc ff df 49 83 c7 10 4d3 [ 5.977860] RSP: 0018:ffffc9000001fb18 EFLAGS: 00010a02 [ 5.977860] RAX: dffffc0000000000 RBX: aaaaaaaaaaaaaaaa RCX: ffff8883eb9a8b08 [ 5.977860] RDX: 0000000000000005 RSI: 0000000000400cc0 RDI: aaaaaaaaaaaaaaaa [ 5.977860] RBP: 0000000000000005 R08: 3333333333333333 R09: 0000000000000000 [ 5.977860] R10: 0000000000000000 R11: 0000000000000000 R12: ffff8883eb9a8b18 [ 5.977860] R13: 1555555555555557 R14: 0000000000400cc0 R15: aaaaaaaaaaaaaaba [ 5.977860] FS: 00007f2976438b40(0000) GS:ffff8883eb980000(0000) knlGS:0000000000000000 [ 5.977860] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 5.977860] CR2: 00007f29769e0060 CR3: 0000000107222003 CR4: 0000000000370eb0 [ 5.977860] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 [ 5.977860] DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 [ 5.977860] Call Trace: [ 5.977860] <TASK> [ 5.977860] ? __die_body+0x16/0x75 [ 5.977860] ? die_addr+0x4a/0x70 [ 5.977860] ? exc_general_protection+0x1c9/0x2d0 [ 5.977860] ? cgroup_mkdir+0x455/0x9fb [ 5.977860] ? __x64_sys_mkdir+0x69/0x80 [ 5.977860] ? asm_exc_general_protection+0x26/0x30 [ 5.977860] ? obj_cgroup_charge_pages+0x27/0x2d5 [ 5.977860] obj_cgroup_charge+0x114/0x1ab [ 5.977860] pcpu_alloc+0x1a6/0xa65 [ 5.977860] ? mem_cgroup_css_alloc+0x1eb/0x1140 [ 5.977860] ? cgroup_apply_control_enable+0x26b/0x7c0 [ 5.977860] mem_cgroup_css_alloc+0x23f/0x1140 [ 5.977860] cgroup_apply_control_enable+0x26b/0x7c0 [ 5.977860] ? cgroup_kn_set_ugid+0x2d/0x1a0 [ 5.977860] cgroup_mkdir+0x455/0x9fb [ 5.977860] ? __cfi_cgroup_mkdir+0x10/0x10 [ 5.977860] kernfs_iop_mkdir+0x130/0x170 [ 5.977860] vfs_mkdir+0x405/0x530 [ 5.977860] do_mkdirat+0x188/0x1f0 [ 5.977860] __x64_sys_mkdir+0x69/0x80 [ 5.977860] do_syscall_64+0x7d/0x100 [ 5.977860] ? do_syscall_64+0x89/0x100 [ 5.977860] ? do_syscall_64+0x89/0x100 [ 5.977860] ? do_syscall_64+0x89/0x100 [ 5.977860] ? do_syscall_64+0x89/0x100 [ 5.977860] entry_SYSCALL_64_after_hwframe+0x4b/0x53 [ 5.977860] RIP: 0033:0x7f297671defb [ 5.977860] Code: 8b 05 39 7f 0d 00 bb ff ff ff ff 64 c7 00 16 00 00 00 e9 61 ff ff ff e8 23 0c 02 00 0f 1f 00 f3 0f 1e fa b88 [ 5.977860] RSP: 002b:00007ffee6242bb8 EFLAGS: 00000246 ORIG_RAX: 0000000000000053 [ 5.977860] RAX: ffffffffffffffda RBX: 0000000000000000 RCX: 00007f297671defb [ 5.977860] RDX: 0000000000000000 RSI: 00000000000001ed RDI: 000055c6b449f0e0 [ 5.977860] RBP: 00007ffee6242bf0 R08: 000000000000000e R09: 0000000000000000 [ 5.977860] R10: 0000000000000000 R11: 0000000000000246 R12: 000055c6b445db80 [ 5.977860] R13: 00000000000003a0 R14: 00007f2976a68651 R15: 00000000000003a0 [ 5.977860] </TASK> [ 5.977860] Modules linked in: [ 6.014095] ---[ end trace 0000000000000000 ]--- [ 6.014701] RIP: 0010:obj_cgroup_charge_pages+0x27/0x2d5 [ 6.015348] Code: 90 90 90 55 41 57 41 56 41 55 41 54 53 89 d5 41 89 f6 49 89 ff 48 b8 00 00 00 00 00 fc ff df 49 83 c7 10 4d3 [ 6.017575] RSP: 0018:ffffc9000001fb18 EFLAGS: 00010a02 [ 6.018255] RAX: dffffc0000000000 RBX: aaaaaaaaaaaaaaaa RCX: ffff8883eb9a8b08 [ 6.019120] RDX: 0000000000000005 RSI: 0000000000400cc0 RDI: aaaaaaaaaaaaaaaa [ 6.019983] RBP: 0000000000000005 R08: 3333333333333333 R09: 0000000000000000 [ 6.020849] R10: 0000000000000000 R11: 0000000000000000 R12: ffff8883eb9a8b18 [ 6.021747] R13: 1555555555555557 R14: 0000000000400cc0 R15: aaaaaaaaaaaaaaba [ 6.022609] FS: 00007f2976438b40(0000) GS:ffff8883eb980000(0000) knlGS:0000000000000000 [ 6.023593] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 6.024296] CR2: 00007f29769e0060 CR3: 0000000107222003 CR4: 0000000000370eb0 [ 6.025279] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 [ 6.026139] DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 [ 6.027000] Kernel panic - not syncing: Attempted to kill init! exitcode=0x0000000b Actually the problem is caused by uninitialized local variable in current_obj_cgroup(). If the root memory cgroup is set as an active memory cgroup for a charging scope (as in the trace, where systemd tries to create the first non-root cgroup, so the parent cgroup is the root cgroup), the "for" loop is skipped and uninitialized objcg is returned, causing a panic down the accounting stack. The fix is trivial: initialize the objcg variable to NULL unconditionally before the "for" loop. Fixes: e86828e ("mm: kmem: scoped objcg protection") Reported-by: Erhard Furtner <erhard_f@mailbox.org> Closes: ClangBuiltLinux#1959 Signed-off-by: Roman Gushchin (Cruise) <roman.gushchin@linux.dev> Cc: Shakeel Butt <shakeelb@google.com> Cc: Vlastimil Babka <vbabka@suse.cz> Cc: David Rientjes <rientjes@google.com> Cc: Dennis Zhou <dennis@kernel.org> Cc: Johannes Weiner <hannes@cmpxchg.org> Cc: Michal Hocko <mhocko@kernel.org> Cc: Muchun Song <muchun.song@linux.dev> Cc: stable@vger.kernel.org

…oup() Erhard reported that the 6.7-rc1 kernel panics on boot if being built with clang-16. The problem was not reproducible with gcc. [ 5.975049] general protection fault, probably for non-canonical address 0xf555515555555557: 0000 [#1] SMP KASAN PTI [ 5.976422] KASAN: maybe wild-memory-access in range [0xaaaaaaaaaaaaaab8-0xaaaaaaaaaaaaaabf] [ 5.977475] CPU: 3 PID: 1 Comm: systemd Not tainted 6.7.0-rc1-Zen3 torvalds#77 [ 5.977860] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.13.0-1ubuntu1.1 04/01/2014 [ 5.977860] RIP: 0010:obj_cgroup_charge_pages+0x27/0x2d5 [ 5.977860] Code: 90 90 90 55 41 57 41 56 41 55 41 54 53 89 d5 41 89 f6 49 89 ff 48 b8 00 00 00 00 00 fc ff df 49 83 c7 10 4d3 [ 5.977860] RSP: 0018:ffffc9000001fb18 EFLAGS: 00010a02 [ 5.977860] RAX: dffffc0000000000 RBX: aaaaaaaaaaaaaaaa RCX: ffff8883eb9a8b08 [ 5.977860] RDX: 0000000000000005 RSI: 0000000000400cc0 RDI: aaaaaaaaaaaaaaaa [ 5.977860] RBP: 0000000000000005 R08: 3333333333333333 R09: 0000000000000000 [ 5.977860] R10: 0000000000000000 R11: 0000000000000000 R12: ffff8883eb9a8b18 [ 5.977860] R13: 1555555555555557 R14: 0000000000400cc0 R15: aaaaaaaaaaaaaaba [ 5.977860] FS: 00007f2976438b40(0000) GS:ffff8883eb980000(0000) knlGS:0000000000000000 [ 5.977860] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 5.977860] CR2: 00007f29769e0060 CR3: 0000000107222003 CR4: 0000000000370eb0 [ 5.977860] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 [ 5.977860] DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 [ 5.977860] Call Trace: [ 5.977860] <TASK> [ 5.977860] ? __die_body+0x16/0x75 [ 5.977860] ? die_addr+0x4a/0x70 [ 5.977860] ? exc_general_protection+0x1c9/0x2d0 [ 5.977860] ? cgroup_mkdir+0x455/0x9fb [ 5.977860] ? __x64_sys_mkdir+0x69/0x80 [ 5.977860] ? asm_exc_general_protection+0x26/0x30 [ 5.977860] ? obj_cgroup_charge_pages+0x27/0x2d5 [ 5.977860] obj_cgroup_charge+0x114/0x1ab [ 5.977860] pcpu_alloc+0x1a6/0xa65 [ 5.977860] ? mem_cgroup_css_alloc+0x1eb/0x1140 [ 5.977860] ? cgroup_apply_control_enable+0x26b/0x7c0 [ 5.977860] mem_cgroup_css_alloc+0x23f/0x1140 [ 5.977860] cgroup_apply_control_enable+0x26b/0x7c0 [ 5.977860] ? cgroup_kn_set_ugid+0x2d/0x1a0 [ 5.977860] cgroup_mkdir+0x455/0x9fb [ 5.977860] ? __cfi_cgroup_mkdir+0x10/0x10 [ 5.977860] kernfs_iop_mkdir+0x130/0x170 [ 5.977860] vfs_mkdir+0x405/0x530 [ 5.977860] do_mkdirat+0x188/0x1f0 [ 5.977860] __x64_sys_mkdir+0x69/0x80 [ 5.977860] do_syscall_64+0x7d/0x100 [ 5.977860] ? do_syscall_64+0x89/0x100 [ 5.977860] ? do_syscall_64+0x89/0x100 [ 5.977860] ? do_syscall_64+0x89/0x100 [ 5.977860] ? do_syscall_64+0x89/0x100 [ 5.977860] entry_SYSCALL_64_after_hwframe+0x4b/0x53 [ 5.977860] RIP: 0033:0x7f297671defb [ 5.977860] Code: 8b 05 39 7f 0d 00 bb ff ff ff ff 64 c7 00 16 00 00 00 e9 61 ff ff ff e8 23 0c 02 00 0f 1f 00 f3 0f 1e fa b88 [ 5.977860] RSP: 002b:00007ffee6242bb8 EFLAGS: 00000246 ORIG_RAX: 0000000000000053 [ 5.977860] RAX: ffffffffffffffda RBX: 0000000000000000 RCX: 00007f297671defb [ 5.977860] RDX: 0000000000000000 RSI: 00000000000001ed RDI: 000055c6b449f0e0 [ 5.977860] RBP: 00007ffee6242bf0 R08: 000000000000000e R09: 0000000000000000 [ 5.977860] R10: 0000000000000000 R11: 0000000000000246 R12: 000055c6b445db80 [ 5.977860] R13: 00000000000003a0 R14: 00007f2976a68651 R15: 00000000000003a0 [ 5.977860] </TASK> [ 5.977860] Modules linked in: [ 6.014095] ---[ end trace 0000000000000000 ]--- [ 6.014701] RIP: 0010:obj_cgroup_charge_pages+0x27/0x2d5 [ 6.015348] Code: 90 90 90 55 41 57 41 56 41 55 41 54 53 89 d5 41 89 f6 49 89 ff 48 b8 00 00 00 00 00 fc ff df 49 83 c7 10 4d3 [ 6.017575] RSP: 0018:ffffc9000001fb18 EFLAGS: 00010a02 [ 6.018255] RAX: dffffc0000000000 RBX: aaaaaaaaaaaaaaaa RCX: ffff8883eb9a8b08 [ 6.019120] RDX: 0000000000000005 RSI: 0000000000400cc0 RDI: aaaaaaaaaaaaaaaa [ 6.019983] RBP: 0000000000000005 R08: 3333333333333333 R09: 0000000000000000 [ 6.020849] R10: 0000000000000000 R11: 0000000000000000 R12: ffff8883eb9a8b18 [ 6.021747] R13: 1555555555555557 R14: 0000000000400cc0 R15: aaaaaaaaaaaaaaba [ 6.022609] FS: 00007f2976438b40(0000) GS:ffff8883eb980000(0000) knlGS:0000000000000000 [ 6.023593] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 6.024296] CR2: 00007f29769e0060 CR3: 0000000107222003 CR4: 0000000000370eb0 [ 6.025279] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 [ 6.026139] DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 [ 6.027000] Kernel panic - not syncing: Attempted to kill init! exitcode=0x0000000b Actually the problem is caused by uninitialized local variable in current_obj_cgroup(). If the root memory cgroup is set as an active memory cgroup for a charging scope (as in the trace, where systemd tries to create the first non-root cgroup, so the parent cgroup is the root cgroup), the "for" loop is skipped and uninitialized objcg is returned, causing a panic down the accounting stack. The fix is trivial: initialize the objcg variable to NULL unconditionally before the "for" loop. Link: https://lkml.kernel.org/r/20231116025109.3775055-1-roman.gushchin@linux.dev Fixes: e86828e ("mm: kmem: scoped objcg protection") Signed-off-by: Roman Gushchin (Cruise) <roman.gushchin@linux.dev> Reported-by: Erhard Furtner <erhard_f@mailbox.org> Closes: ClangBuiltLinux#1959 Tested-by: Erhard Furtner <erhard_f@mailbox.org> Acked-by: Vlastimil Babka <vbabka@suse.cz> Acked-by: Shakeel Butt <shakeelb@google.com> Cc: David Rientjes <rientjes@google.com> Cc: Dennis Zhou <dennis@kernel.org> Cc: Johannes Weiner <hannes@cmpxchg.org> Cc: Michal Hocko <mhocko@kernel.org> Cc: Muchun Song <muchun.song@linux.dev> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>

With latest upstream llvm18, the following test cases failed: $ ./test_progs -j torvalds#13/2 bpf_cookie/multi_kprobe_link_api:FAIL torvalds#13/3 bpf_cookie/multi_kprobe_attach_api:FAIL torvalds#13 bpf_cookie:FAIL torvalds#77 fentry_fexit:FAIL torvalds#78/1 fentry_test/fentry:FAIL torvalds#78 fentry_test:FAIL torvalds#82/1 fexit_test/fexit:FAIL torvalds#82 fexit_test:FAIL torvalds#112/1 kprobe_multi_test/skel_api:FAIL torvalds#112/2 kprobe_multi_test/link_api_addrs:FAIL ... torvalds#112 kprobe_multi_test:FAIL torvalds#356/17 test_global_funcs/global_func17:FAIL torvalds#356 test_global_funcs:FAIL Further analysis shows llvm upstream patch [1] is responsible for the above failures. For example, for function bpf_fentry_test7() in net/bpf/test_run.c, without [1], the asm code is: 0000000000000400 <bpf_fentry_test7>: 400: f3 0f 1e fa endbr64 404: e8 00 00 00 00 callq 0x409 <bpf_fentry_test7+0x9> 409: 48 89 f8 movq %rdi, %rax 40c: c3 retq 40d: 0f 1f 00 nopl (%rax) and with [1], the asm code is: 0000000000005d20 <bpf_fentry_test7.specialized.1>: 5d20: e8 00 00 00 00 callq 0x5d25 <bpf_fentry_test7.specialized.1+0x5> 5d25: c3 retq and <bpf_fentry_test7.specialized.1> is called instead of <bpf_fentry_test7> and this caused test failures for torvalds#13/torvalds#77 etc. except torvalds#356. For test case torvalds#356/17, with [1] (progs/test_global_func17.c)), the main prog looks like: 0000000000000000 <global_func17>: 0: b4 00 00 00 2a 00 00 00 w0 = 0x2a 1: 95 00 00 00 00 00 00 00 exit which passed verification while the test itself expects a verification failure. Let us add 'barrier_var' style asm code in both places to prevent function specialization which caused selftests failure. [1] llvm/llvm-project#72903 Signed-off-by: Yonghong Song <yonghong.song@linux.dev>

With latest upstream llvm18, the following test cases failed: $ ./test_progs -j #13/2 bpf_cookie/multi_kprobe_link_api:FAIL #13/3 bpf_cookie/multi_kprobe_attach_api:FAIL #13 bpf_cookie:FAIL torvalds#77 fentry_fexit:FAIL torvalds#78/1 fentry_test/fentry:FAIL torvalds#78 fentry_test:FAIL torvalds#82/1 fexit_test/fexit:FAIL torvalds#82 fexit_test:FAIL torvalds#112/1 kprobe_multi_test/skel_api:FAIL torvalds#112/2 kprobe_multi_test/link_api_addrs:FAIL [...] torvalds#112 kprobe_multi_test:FAIL torvalds#356/17 test_global_funcs/global_func17:FAIL torvalds#356 test_global_funcs:FAIL Further analysis shows llvm upstream patch [1] is responsible for the above failures. For example, for function bpf_fentry_test7() in net/bpf/test_run.c, without [1], the asm code is: 0000000000000400 <bpf_fentry_test7>: 400: f3 0f 1e fa endbr64 404: e8 00 00 00 00 callq 0x409 <bpf_fentry_test7+0x9> 409: 48 89 f8 movq %rdi, %rax 40c: c3 retq 40d: 0f 1f 00 nopl (%rax) ... and with [1], the asm code is: 0000000000005d20 <bpf_fentry_test7.specialized.1>: 5d20: e8 00 00 00 00 callq 0x5d25 <bpf_fentry_test7.specialized.1+0x5> 5d25: c3 retq ... and <bpf_fentry_test7.specialized.1> is called instead of <bpf_fentry_test7> and this caused test failures for #13/torvalds#77 etc. except torvalds#356. For test case torvalds#356/17, with [1] (progs/test_global_func17.c)), the main prog looks like: 0000000000000000 <global_func17>: 0: b4 00 00 00 2a 00 00 00 w0 = 0x2a 1: 95 00 00 00 00 00 00 00 exit ... which passed verification while the test itself expects a verification failure. Let us add 'barrier_var' style asm code in both places to prevent function specialization which caused selftests failure. [1] llvm/llvm-project#72903 Signed-off-by: Yonghong Song <yonghong.song@linux.dev> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net> Link: https://lore.kernel.org/bpf/20231127050342.1945270-1-yonghong.song@linux.dev

…oup() Erhard reported that the 6.7-rc1 kernel panics on boot if being built with clang-16. The problem was not reproducible with gcc. [ 5.975049] general protection fault, probably for non-canonical address 0xf555515555555557: 0000 [#1] SMP KASAN PTI [ 5.976422] KASAN: maybe wild-memory-access in range [0xaaaaaaaaaaaaaab8-0xaaaaaaaaaaaaaabf] [ 5.977475] CPU: 3 PID: 1 Comm: systemd Not tainted 6.7.0-rc1-Zen3 torvalds#77 [ 5.977860] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.13.0-1ubuntu1.1 04/01/2014 [ 5.977860] RIP: 0010:obj_cgroup_charge_pages+0x27/0x2d5 [ 5.977860] Code: 90 90 90 55 41 57 41 56 41 55 41 54 53 89 d5 41 89 f6 49 89 ff 48 b8 00 00 00 00 00 fc ff df 49 83 c7 10 4d3 [ 5.977860] RSP: 0018:ffffc9000001fb18 EFLAGS: 00010a02 [ 5.977860] RAX: dffffc0000000000 RBX: aaaaaaaaaaaaaaaa RCX: ffff8883eb9a8b08 [ 5.977860] RDX: 0000000000000005 RSI: 0000000000400cc0 RDI: aaaaaaaaaaaaaaaa [ 5.977860] RBP: 0000000000000005 R08: 3333333333333333 R09: 0000000000000000 [ 5.977860] R10: 0000000000000000 R11: 0000000000000000 R12: ffff8883eb9a8b18 [ 5.977860] R13: 1555555555555557 R14: 0000000000400cc0 R15: aaaaaaaaaaaaaaba [ 5.977860] FS: 00007f2976438b40(0000) GS:ffff8883eb980000(0000) knlGS:0000000000000000 [ 5.977860] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 5.977860] CR2: 00007f29769e0060 CR3: 0000000107222003 CR4: 0000000000370eb0 [ 5.977860] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 [ 5.977860] DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 [ 5.977860] Call Trace: [ 5.977860] <TASK> [ 5.977860] ? __die_body+0x16/0x75 [ 5.977860] ? die_addr+0x4a/0x70 [ 5.977860] ? exc_general_protection+0x1c9/0x2d0 [ 5.977860] ? cgroup_mkdir+0x455/0x9fb [ 5.977860] ? __x64_sys_mkdir+0x69/0x80 [ 5.977860] ? asm_exc_general_protection+0x26/0x30 [ 5.977860] ? obj_cgroup_charge_pages+0x27/0x2d5 [ 5.977860] obj_cgroup_charge+0x114/0x1ab [ 5.977860] pcpu_alloc+0x1a6/0xa65 [ 5.977860] ? mem_cgroup_css_alloc+0x1eb/0x1140 [ 5.977860] ? cgroup_apply_control_enable+0x26b/0x7c0 [ 5.977860] mem_cgroup_css_alloc+0x23f/0x1140 [ 5.977860] cgroup_apply_control_enable+0x26b/0x7c0 [ 5.977860] ? cgroup_kn_set_ugid+0x2d/0x1a0 [ 5.977860] cgroup_mkdir+0x455/0x9fb [ 5.977860] ? __cfi_cgroup_mkdir+0x10/0x10 [ 5.977860] kernfs_iop_mkdir+0x130/0x170 [ 5.977860] vfs_mkdir+0x405/0x530 [ 5.977860] do_mkdirat+0x188/0x1f0 [ 5.977860] __x64_sys_mkdir+0x69/0x80 [ 5.977860] do_syscall_64+0x7d/0x100 [ 5.977860] ? do_syscall_64+0x89/0x100 [ 5.977860] ? do_syscall_64+0x89/0x100 [ 5.977860] ? do_syscall_64+0x89/0x100 [ 5.977860] ? do_syscall_64+0x89/0x100 [ 5.977860] entry_SYSCALL_64_after_hwframe+0x4b/0x53 [ 5.977860] RIP: 0033:0x7f297671defb [ 5.977860] Code: 8b 05 39 7f 0d 00 bb ff ff ff ff 64 c7 00 16 00 00 00 e9 61 ff ff ff e8 23 0c 02 00 0f 1f 00 f3 0f 1e fa b88 [ 5.977860] RSP: 002b:00007ffee6242bb8 EFLAGS: 00000246 ORIG_RAX: 0000000000000053 [ 5.977860] RAX: ffffffffffffffda RBX: 0000000000000000 RCX: 00007f297671defb [ 5.977860] RDX: 0000000000000000 RSI: 00000000000001ed RDI: 000055c6b449f0e0 [ 5.977860] RBP: 00007ffee6242bf0 R08: 000000000000000e R09: 0000000000000000 [ 5.977860] R10: 0000000000000000 R11: 0000000000000246 R12: 000055c6b445db80 [ 5.977860] R13: 00000000000003a0 R14: 00007f2976a68651 R15: 00000000000003a0 [ 5.977860] </TASK> [ 5.977860] Modules linked in: [ 6.014095] ---[ end trace 0000000000000000 ]--- [ 6.014701] RIP: 0010:obj_cgroup_charge_pages+0x27/0x2d5 [ 6.015348] Code: 90 90 90 55 41 57 41 56 41 55 41 54 53 89 d5 41 89 f6 49 89 ff 48 b8 00 00 00 00 00 fc ff df 49 83 c7 10 4d3 [ 6.017575] RSP: 0018:ffffc9000001fb18 EFLAGS: 00010a02 [ 6.018255] RAX: dffffc0000000000 RBX: aaaaaaaaaaaaaaaa RCX: ffff8883eb9a8b08 [ 6.019120] RDX: 0000000000000005 RSI: 0000000000400cc0 RDI: aaaaaaaaaaaaaaaa [ 6.019983] RBP: 0000000000000005 R08: 3333333333333333 R09: 0000000000000000 [ 6.020849] R10: 0000000000000000 R11: 0000000000000000 R12: ffff8883eb9a8b18 [ 6.021747] R13: 1555555555555557 R14: 0000000000400cc0 R15: aaaaaaaaaaaaaaba [ 6.022609] FS: 00007f2976438b40(0000) GS:ffff8883eb980000(0000) knlGS:0000000000000000 [ 6.023593] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 6.024296] CR2: 00007f29769e0060 CR3: 0000000107222003 CR4: 0000000000370eb0 [ 6.025279] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 [ 6.026139] DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 [ 6.027000] Kernel panic - not syncing: Attempted to kill init! exitcode=0x0000000b Actually the problem is caused by uninitialized local variable in current_obj_cgroup(). If the root memory cgroup is set as an active memory cgroup for a charging scope (as in the trace, where systemd tries to create the first non-root cgroup, so the parent cgroup is the root cgroup), the "for" loop is skipped and uninitialized objcg is returned, causing a panic down the accounting stack. The fix is trivial: initialize the objcg variable to NULL unconditionally before the "for" loop. Link: https://lkml.kernel.org/r/20231116025109.3775055-1-roman.gushchin@linux.dev Fixes: e86828e ("mm: kmem: scoped objcg protection") Signed-off-by: Roman Gushchin (Cruise) <roman.gushchin@linux.dev> Reported-by: Erhard Furtner <erhard_f@mailbox.org> Closes: ClangBuiltLinux#1959 Tested-by: Erhard Furtner <erhard_f@mailbox.org> Acked-by: Vlastimil Babka <vbabka@suse.cz> Acked-by: Shakeel Butt <shakeelb@google.com> Cc: David Rientjes <rientjes@google.com> Cc: Dennis Zhou <dennis@kernel.org> Cc: Johannes Weiner <hannes@cmpxchg.org> Cc: Michal Hocko <mhocko@kernel.org> Cc: Muchun Song <muchun.song@linux.dev> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>

…oup() Erhard reported that the 6.7-rc1 kernel panics on boot if being built with clang-16. The problem was not reproducible with gcc. [ 5.975049] general protection fault, probably for non-canonical address 0xf555515555555557: 0000 [#1] SMP KASAN PTI [ 5.976422] KASAN: maybe wild-memory-access in range [0xaaaaaaaaaaaaaab8-0xaaaaaaaaaaaaaabf] [ 5.977475] CPU: 3 PID: 1 Comm: systemd Not tainted 6.7.0-rc1-Zen3 torvalds#77 [ 5.977860] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.13.0-1ubuntu1.1 04/01/2014 [ 5.977860] RIP: 0010:obj_cgroup_charge_pages+0x27/0x2d5 [ 5.977860] Code: 90 90 90 55 41 57 41 56 41 55 41 54 53 89 d5 41 89 f6 49 89 ff 48 b8 00 00 00 00 00 fc ff df 49 83 c7 10 4d3 [ 5.977860] RSP: 0018:ffffc9000001fb18 EFLAGS: 00010a02 [ 5.977860] RAX: dffffc0000000000 RBX: aaaaaaaaaaaaaaaa RCX: ffff8883eb9a8b08 [ 5.977860] RDX: 0000000000000005 RSI: 0000000000400cc0 RDI: aaaaaaaaaaaaaaaa [ 5.977860] RBP: 0000000000000005 R08: 3333333333333333 R09: 0000000000000000 [ 5.977860] R10: 0000000000000000 R11: 0000000000000000 R12: ffff8883eb9a8b18 [ 5.977860] R13: 1555555555555557 R14: 0000000000400cc0 R15: aaaaaaaaaaaaaaba [ 5.977860] FS: 00007f2976438b40(0000) GS:ffff8883eb980000(0000) knlGS:0000000000000000 [ 5.977860] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 5.977860] CR2: 00007f29769e0060 CR3: 0000000107222003 CR4: 0000000000370eb0 [ 5.977860] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 [ 5.977860] DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 [ 5.977860] Call Trace: [ 5.977860] <TASK> [ 5.977860] ? __die_body+0x16/0x75 [ 5.977860] ? die_addr+0x4a/0x70 [ 5.977860] ? exc_general_protection+0x1c9/0x2d0 [ 5.977860] ? cgroup_mkdir+0x455/0x9fb [ 5.977860] ? __x64_sys_mkdir+0x69/0x80 [ 5.977860] ? asm_exc_general_protection+0x26/0x30 [ 5.977860] ? obj_cgroup_charge_pages+0x27/0x2d5 [ 5.977860] obj_cgroup_charge+0x114/0x1ab [ 5.977860] pcpu_alloc+0x1a6/0xa65 [ 5.977860] ? mem_cgroup_css_alloc+0x1eb/0x1140 [ 5.977860] ? cgroup_apply_control_enable+0x26b/0x7c0 [ 5.977860] mem_cgroup_css_alloc+0x23f/0x1140 [ 5.977860] cgroup_apply_control_enable+0x26b/0x7c0 [ 5.977860] ? cgroup_kn_set_ugid+0x2d/0x1a0 [ 5.977860] cgroup_mkdir+0x455/0x9fb [ 5.977860] ? __cfi_cgroup_mkdir+0x10/0x10 [ 5.977860] kernfs_iop_mkdir+0x130/0x170 [ 5.977860] vfs_mkdir+0x405/0x530 [ 5.977860] do_mkdirat+0x188/0x1f0 [ 5.977860] __x64_sys_mkdir+0x69/0x80 [ 5.977860] do_syscall_64+0x7d/0x100 [ 5.977860] ? do_syscall_64+0x89/0x100 [ 5.977860] ? do_syscall_64+0x89/0x100 [ 5.977860] ? do_syscall_64+0x89/0x100 [ 5.977860] ? do_syscall_64+0x89/0x100 [ 5.977860] entry_SYSCALL_64_after_hwframe+0x4b/0x53 [ 5.977860] RIP: 0033:0x7f297671defb [ 5.977860] Code: 8b 05 39 7f 0d 00 bb ff ff ff ff 64 c7 00 16 00 00 00 e9 61 ff ff ff e8 23 0c 02 00 0f 1f 00 f3 0f 1e fa b88 [ 5.977860] RSP: 002b:00007ffee6242bb8 EFLAGS: 00000246 ORIG_RAX: 0000000000000053 [ 5.977860] RAX: ffffffffffffffda RBX: 0000000000000000 RCX: 00007f297671defb [ 5.977860] RDX: 0000000000000000 RSI: 00000000000001ed RDI: 000055c6b449f0e0 [ 5.977860] RBP: 00007ffee6242bf0 R08: 000000000000000e R09: 0000000000000000 [ 5.977860] R10: 0000000000000000 R11: 0000000000000246 R12: 000055c6b445db80 [ 5.977860] R13: 00000000000003a0 R14: 00007f2976a68651 R15: 00000000000003a0 [ 5.977860] </TASK> [ 5.977860] Modules linked in: [ 6.014095] ---[ end trace 0000000000000000 ]--- [ 6.014701] RIP: 0010:obj_cgroup_charge_pages+0x27/0x2d5 [ 6.015348] Code: 90 90 90 55 41 57 41 56 41 55 41 54 53 89 d5 41 89 f6 49 89 ff 48 b8 00 00 00 00 00 fc ff df 49 83 c7 10 4d3 [ 6.017575] RSP: 0018:ffffc9000001fb18 EFLAGS: 00010a02 [ 6.018255] RAX: dffffc0000000000 RBX: aaaaaaaaaaaaaaaa RCX: ffff8883eb9a8b08 [ 6.019120] RDX: 0000000000000005 RSI: 0000000000400cc0 RDI: aaaaaaaaaaaaaaaa [ 6.019983] RBP: 0000000000000005 R08: 3333333333333333 R09: 0000000000000000 [ 6.020849] R10: 0000000000000000 R11: 0000000000000000 R12: ffff8883eb9a8b18 [ 6.021747] R13: 1555555555555557 R14: 0000000000400cc0 R15: aaaaaaaaaaaaaaba [ 6.022609] FS: 00007f2976438b40(0000) GS:ffff8883eb980000(0000) knlGS:0000000000000000 [ 6.023593] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 6.024296] CR2: 00007f29769e0060 CR3: 0000000107222003 CR4: 0000000000370eb0 [ 6.025279] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 [ 6.026139] DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 [ 6.027000] Kernel panic - not syncing: Attempted to kill init! exitcode=0x0000000b Actually the problem is caused by uninitialized local variable in current_obj_cgroup(). If the root memory cgroup is set as an active memory cgroup for a charging scope (as in the trace, where systemd tries to create the first non-root cgroup, so the parent cgroup is the root cgroup), the "for" loop is skipped and uninitialized objcg is returned, causing a panic down the accounting stack. The fix is trivial: initialize the objcg variable to NULL unconditionally before the "for" loop. [vbabka@suse.cz: remove redundant assignment] Link: https://lkml.kernel.org/r/4bd106d5-c3e3-6731-9a74-cff81e2392de@suse.cz Link: https://lkml.kernel.org/r/20231116025109.3775055-1-roman.gushchin@linux.dev Fixes: e86828e ("mm: kmem: scoped objcg protection") Signed-off-by: Roman Gushchin (Cruise) <roman.gushchin@linux.dev> Signed-off-by: Vlastimil Babka <vbabka@suse.cz> Reported-by: Erhard Furtner <erhard_f@mailbox.org> Closes: ClangBuiltLinux#1959 Tested-by: Erhard Furtner <erhard_f@mailbox.org> Acked-by: Vlastimil Babka <vbabka@suse.cz> Acked-by: Shakeel Butt <shakeelb@google.com> Cc: David Rientjes <rientjes@google.com> Cc: Dennis Zhou <dennis@kernel.org> Cc: Johannes Weiner <hannes@cmpxchg.org> Cc: Michal Hocko <mhocko@kernel.org> Cc: Muchun Song <muchun.song@linux.dev> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>

scx: Fix !CONFIG_SCHED_CLASS_EXT builds

KSAN calls into rcu code which then triggers a write that reenters into KSAN getting the system stuck doing infinite recursion. #0 kmsan_get_context () at mm/kmsan/kmsan.h:106 #1 __msan_get_context_state () at mm/kmsan/instrumentation.c:331 #2 0xffffffff81495671 in get_current () at ./arch/x86/include/asm/current.h:42 #3 rcu_preempt_read_enter () at kernel/rcu/tree_plugin.h:379 #4 __rcu_read_lock () at kernel/rcu/tree_plugin.h:402 #5 0xffffffff81b2054b in rcu_read_lock () at ./include/linux/rcupdate.h:748 torvalds#6 pfn_valid (pfn=<optimized out>) at ./include/linux/mmzone.h:2016 torvalds#7 kmsan_virt_addr_valid (addr=addr@entry=0xffffffff8620d974 <init_task+1012>) at ./arch/x86/include/asm/kmsan.h:82 torvalds#8 virt_to_page_or_null (vaddr=vaddr@entry=0xffffffff8620d974 <init_task+1012>) at mm/kmsan/shadow.c:75 torvalds#9 0xffffffff81b2023c in kmsan_get_metadata (address=0xffffffff8620d974 <init_task+1012>, is_origin=false) at mm/kmsan/shadow.c:143 torvalds#10 kmsan_get_shadow_origin_ptr (address=0xffffffff8620d974 <init_task+1012>, size=4, store=false) at mm/kmsan/shadow.c:97 torvalds#11 0xffffffff81b1dbd2 in get_shadow_origin_ptr (addr=0xffffffff8620d974 <init_task+1012>, size=4, store=false) at mm/kmsan/instrumentation.c:36 torvalds#12 __msan_metadata_ptr_for_load_4 (addr=0xffffffff8620d974 <init_task+1012>) at mm/kmsan/instrumentation.c:91 torvalds#13 0xffffffff8149568f in rcu_preempt_read_enter () at kernel/rcu/tree_plugin.h:379 torvalds#14 __rcu_read_lock () at kernel/rcu/tree_plugin.h:402 torvalds#15 0xffffffff81b2054b in rcu_read_lock () at ./include/linux/rcupdate.h:748 torvalds#16 pfn_valid (pfn=<optimized out>) at ./include/linux/mmzone.h:2016 torvalds#17 kmsan_virt_addr_valid (addr=addr@entry=0xffffffff8620d974 <init_task+1012>) at ./arch/x86/include/asm/kmsan.h:82 torvalds#18 virt_to_page_or_null (vaddr=vaddr@entry=0xffffffff8620d974 <init_task+1012>) at mm/kmsan/shadow.c:75 torvalds#19 0xffffffff81b2023c in kmsan_get_metadata (address=0xffffffff8620d974 <init_task+1012>, is_origin=false) at mm/kmsan/shadow.c:143 torvalds#20 kmsan_get_shadow_origin_ptr (address=0xffffffff8620d974 <init_task+1012>, size=4, store=false) at mm/kmsan/shadow.c:97 torvalds#21 0xffffffff81b1dbd2 in get_shadow_origin_ptr (addr=0xffffffff8620d974 <init_task+1012>, size=4, store=false) at mm/kmsan/instrumentation.c:36 torvalds#22 __msan_metadata_ptr_for_load_4 (addr=0xffffffff8620d974 <init_task+1012>) at mm/kmsan/instrumentation.c:91 torvalds#23 0xffffffff8149568f in rcu_preempt_read_enter () at kernel/rcu/tree_plugin.h:379 torvalds#24 __rcu_read_lock () at kernel/rcu/tree_plugin.h:402 torvalds#25 0xffffffff81b2054b in rcu_read_lock () at ./include/linux/rcupdate.h:748 torvalds#26 pfn_valid (pfn=<optimized out>) at ./include/linux/mmzone.h:2016 torvalds#27 kmsan_virt_addr_valid (addr=addr@entry=0xffffffff8620d974 <init_task+1012>) at ./arch/x86/include/asm/kmsan.h:82 torvalds#28 virt_to_page_or_null (vaddr=vaddr@entry=0xffffffff8620d974 <init_task+1012>) at mm/kmsan/shadow.c:75 torvalds#29 0xffffffff81b2023c in kmsan_get_metadata (address=0xffffffff8620d974 <init_task+1012>, is_origin=false) at mm/kmsan/shadow.c:143 torvalds#30 kmsan_get_shadow_origin_ptr (address=0xffffffff8620d974 <init_task+1012>, size=4, store=false) at mm/kmsan/shadow.c:97 torvalds#31 0xffffffff81b1dbd2 in get_shadow_origin_ptr (addr=0xffffffff8620d974 <init_task+1012>, size=4, store=false) at mm/kmsan/instrumentation.c:36 torvalds#32 __msan_metadata_ptr_for_load_4 (addr=0xffffffff8620d974 <init_task+1012>) at mm/kmsan/instrumentation.c:91 torvalds#33 0xffffffff8149568f in rcu_preempt_read_enter () at kernel/rcu/tree_plugin.h:379 torvalds#34 __rcu_read_lock () at kernel/rcu/tree_plugin.h:402 torvalds#35 0xffffffff81b2054b in rcu_read_lock () at ./include/linux/rcupdate.h:748 torvalds#36 pfn_valid (pfn=<optimized out>) at ./include/linux/mmzone.h:2016 torvalds#37 kmsan_virt_addr_valid (addr=addr@entry=0xffffffff8620d974 <init_task+1012>) at ./arch/x86/include/asm/kmsan.h:82 torvalds#38 virt_to_page_or_null (vaddr=vaddr@entry=0xffffffff8620d974 <init_task+1012>) at mm/kmsan/shadow.c:75 torvalds#39 0xffffffff81b2023c in kmsan_get_metadata (address=0xffffffff8620d974 <init_task+1012>, is_origin=false) at mm/kmsan/shadow.c:143 torvalds#40 kmsan_get_shadow_origin_ptr (address=0xffffffff8620d974 <init_task+1012>, size=4, store=false) at mm/kmsan/shadow.c:97 torvalds#41 0xffffffff81b1dbd2 in get_shadow_origin_ptr (addr=0xffffffff8620d974 <init_task+1012>, size=4, store=false) at mm/kmsan/instrumentation.c:36 torvalds#42 __msan_metadata_ptr_for_load_4 (addr=0xffffffff8620d974 <init_task+1012>) at mm/kmsan/instrumentation.c:91 torvalds#43 0xffffffff8149568f in rcu_preempt_read_enter () at kernel/rcu/tree_plugin.h:379 torvalds#44 __rcu_read_lock () at kernel/rcu/tree_plugin.h:402 torvalds#45 0xffffffff81b2054b in rcu_read_lock () at ./include/linux/rcupdate.h:748 torvalds#46 pfn_valid (pfn=<optimized out>) at ./include/linux/mmzone.h:2016 torvalds#47 kmsan_virt_addr_valid (addr=addr@entry=0xffffffff8620d974 <init_task+1012>) at ./arch/x86/include/asm/kmsan.h:82 torvalds#48 virt_to_page_or_null (vaddr=vaddr@entry=0xffffffff8620d974 <init_task+1012>) at mm/kmsan/shadow.c:75 torvalds#49 0xffffffff81b2023c in kmsan_get_metadata (address=0xffffffff8620d974 <init_task+1012>, is_origin=false) at mm/kmsan/shadow.c:143 torvalds#50 kmsan_get_shadow_origin_ptr (address=0xffffffff8620d974 <init_task+1012>, size=4, store=false) at mm/kmsan/shadow.c:97 torvalds#51 0xffffffff81b1dbd2 in get_shadow_origin_ptr (addr=0xffffffff8620d974 <init_task+1012>, size=4, store=false) at mm/kmsan/instrumentation.c:36 #52 __msan_metadata_ptr_for_load_4 (addr=0xffffffff8620d974 <init_task+1012>) at mm/kmsan/instrumentation.c:91 #53 0xffffffff8149568f in rcu_preempt_read_enter () at kernel/rcu/tree_plugin.h:379 torvalds#54 __rcu_read_lock () at kernel/rcu/tree_plugin.h:402 torvalds#55 0xffffffff81b2054b in rcu_read_lock () at ./include/linux/rcupdate.h:748 torvalds#56 pfn_valid (pfn=<optimized out>) at ./include/linux/mmzone.h:2016 torvalds#57 kmsan_virt_addr_valid (addr=addr@entry=0xffffffff8620d974 <init_task+1012>) at ./arch/x86/include/asm/kmsan.h:82 #58 virt_to_page_or_null (vaddr=vaddr@entry=0xffffffff8620d974 <init_task+1012>) at mm/kmsan/shadow.c:75 torvalds#59 0xffffffff81b2023c in kmsan_get_metadata (address=0xffffffff8620d974 <init_task+1012>, is_origin=false) at mm/kmsan/shadow.c:143 torvalds#60 kmsan_get_shadow_origin_ptr (address=0xffffffff8620d974 <init_task+1012>, size=4, store=false) at mm/kmsan/shadow.c:97 torvalds#61 0xffffffff81b1dbd2 in get_shadow_origin_ptr (addr=0xffffffff8620d974 <init_task+1012>, size=4, store=false) at mm/kmsan/instrumentation.c:36 torvalds#62 __msan_metadata_ptr_for_load_4 (addr=0xffffffff8620d974 <init_task+1012>) at mm/kmsan/instrumentation.c:91 torvalds#63 0xffffffff8149568f in rcu_preempt_read_enter () at kernel/rcu/tree_plugin.h:379 torvalds#64 __rcu_read_lock () at kernel/rcu/tree_plugin.h:402 torvalds#65 0xffffffff81b2054b in rcu_read_lock () at ./include/linux/rcupdate.h:748 torvalds#66 pfn_valid (pfn=<optimized out>) at ./include/linux/mmzone.h:2016 torvalds#67 kmsan_virt_addr_valid (addr=addr@entry=0xffffffff8620d974 <init_task+1012>) at ./arch/x86/include/asm/kmsan.h:82 torvalds#68 virt_to_page_or_null (vaddr=vaddr@entry=0xffffffff8620d974 <init_task+1012>) at mm/kmsan/shadow.c:75 torvalds#69 0xffffffff81b2023c in kmsan_get_metadata (address=0xffffffff8620d974 <init_task+1012>, is_origin=false) at mm/kmsan/shadow.c:143 #70 kmsan_get_shadow_origin_ptr (address=0xffffffff8620d974 <init_task+1012>, size=4, store=false) at mm/kmsan/shadow.c:97 torvalds#71 0xffffffff81b1dbd2 in get_shadow_origin_ptr (addr=0xffffffff8620d974 <init_task+1012>, size=4, store=false) at mm/kmsan/instrumentation.c:36 torvalds#72 __msan_metadata_ptr_for_load_4 (addr=0xffffffff8620d974 <init_task+1012>) at mm/kmsan/instrumentation.c:91 torvalds#73 0xffffffff8149568f in rcu_preempt_read_enter () at kernel/rcu/tree_plugin.h:379 torvalds#74 __rcu_read_lock () at kernel/rcu/tree_plugin.h:402 torvalds#75 0xffffffff81b2054b in rcu_read_lock () at ./include/linux/rcupdate.h:748 torvalds#76 pfn_valid (pfn=<optimized out>) at ./include/linux/mmzone.h:2016 torvalds#77 kmsan_virt_addr_valid (addr=addr@entry=0xffffffff86203c90) at ./arch/x86/include/asm/kmsan.h:82 torvalds#78 virt_to_page_or_null (vaddr=vaddr@entry=0xffffffff86203c90) at mm/kmsan/shadow.c:75 torvalds#79 0xffffffff81b2023c in kmsan_get_metadata (address=0xffffffff86203c90, is_origin=false) at mm/kmsan/shadow.c:143 torvalds#80 kmsan_get_shadow_origin_ptr (address=0xffffffff86203c90, size=8, store=false) at mm/kmsan/shadow.c:97 torvalds#81 0xffffffff81b1dc72 in get_shadow_origin_ptr (addr=0xffffffff8620d974 <init_task+1012>, size=8, store=false) at mm/kmsan/instrumentation.c:36 torvalds#82 __msan_metadata_ptr_for_load_8 (addr=0xffffffff8620d974 <init_task+1012>) at mm/kmsan/instrumentation.c:92 torvalds#83 0xffffffff814fdb9e in filter_irq_stacks (entries=<optimized out>, nr_entries=4) at kernel/stacktrace.c:397 torvalds#84 0xffffffff829520e8 in stack_depot_save_flags (entries=0xffffffff8620d974 <init_task+1012>, nr_entries=4, alloc_flags=0, depot_flags=0) at lib/stackdepot.c:500 torvalds#85 0xffffffff81b1e560 in __msan_poison_alloca (address=0xffffffff86203da0, size=24, descr=<optimized out>) at mm/kmsan/instrumentation.c:285 torvalds#86 0xffffffff8562821c in _printk (fmt=0xffffffff85f191a5 "\0016Attempting lock1") at kernel/printk/printk.c:2324 torvalds#87 0xffffffff81942aa2 in kmem_cache_create_usercopy (name=0xffffffff85f18903 "mm_struct", size=1296, align=0, flags=270336, useroffset=<optimized out>, usersize=<optimized out>, ctor=0x0 <fixed_percpu_data>) at mm/slab_common.c:296 torvalds#88 0xffffffff86f337a0 in mm_cache_init () at kernel/fork.c:3262 torvalds#89 0xffffffff86eacb8e in start_kernel () at init/main.c:932 torvalds#90 0xffffffff86ecdf94 in x86_64_start_reservations (real_mode_data=0x140e0 <exception_stacks+28896> <error: Cannot access memory at address 0x140e0>) at arch/x86/kernel/head64.c:555 torvalds#91 0xffffffff86ecde9b in x86_64_start_kernel (real_mode_data=0x140e0 <exception_stacks+28896> <error: Cannot access memory at address 0x140e0>) at arch/x86/kernel/head64.c:536 torvalds#92 0xffffffff810001d3 in secondary_startup_64 () at /pool/workspace/linux/arch/x86/kernel/head_64.S:461 torvalds#93 0x0000000000000000 in ??

As of 5ec8e8e(mm/sparsemem: fix race in accessing memory_section->usage) KMSAN now calls into RCU tree code during kmsan_get_metadata. This will trigger a write that will reenter into KMSAN getting the system stuck doing infinite recursion. #0 kmsan_get_context () at mm/kmsan/kmsan.h:106 #1 __msan_get_context_state () at mm/kmsan/instrumentation.c:331 #2 0xffffffff81495671 in get_current () at ./arch/x86/include/asm/current.h:42 #3 rcu_preempt_read_enter () at kernel/rcu/tree_plugin.h:379 #4 __rcu_read_lock () at kernel/rcu/tree_plugin.h:402 #5 0xffffffff81b2054b in rcu_read_lock () at ./include/linux/rcupdate.h:748 torvalds#6 pfn_valid (pfn=<optimized out>) at ./include/linux/mmzone.h:2016 torvalds#7 kmsan_virt_addr_valid (addr=addr@entry=0xffffffff8620d974 <init_task+1012>) at ./arch/x86/include/asm/kmsan.h:82 torvalds#8 virt_to_page_or_null (vaddr=vaddr@entry=0xffffffff8620d974 <init_task+1012>) at mm/kmsan/shadow.c:75 torvalds#9 0xffffffff81b2023c in kmsan_get_metadata (address=0xffffffff8620d974 <init_task+1012>, is_origin=false) at mm/kmsan/shadow.c:143 torvalds#10 kmsan_get_shadow_origin_ptr (address=0xffffffff8620d974 <init_task+1012>, size=4, store=false) at mm/kmsan/shadow.c:97 torvalds#11 0xffffffff81b1dbd2 in get_shadow_origin_ptr (addr=0xffffffff8620d974 <init_task+1012>, size=4, store=false) at mm/kmsan/instrumentation.c:36 torvalds#12 __msan_metadata_ptr_for_load_4 (addr=0xffffffff8620d974 <init_task+1012>) at mm/kmsan/instrumentation.c:91 torvalds#13 0xffffffff8149568f in rcu_preempt_read_enter () at kernel/rcu/tree_plugin.h:379 torvalds#14 __rcu_read_lock () at kernel/rcu/tree_plugin.h:402 torvalds#15 0xffffffff81b2054b in rcu_read_lock () at ./include/linux/rcupdate.h:748 torvalds#16 pfn_valid (pfn=<optimized out>) at ./include/linux/mmzone.h:2016 torvalds#17 kmsan_virt_addr_valid (addr=addr@entry=0xffffffff8620d974 <init_task+1012>) at ./arch/x86/include/asm/kmsan.h:82 torvalds#18 virt_to_page_or_null (vaddr=vaddr@entry=0xffffffff8620d974 <init_task+1012>) at mm/kmsan/shadow.c:75 torvalds#19 0xffffffff81b2023c in kmsan_get_metadata (address=0xffffffff8620d974 <init_task+1012>, is_origin=false) at mm/kmsan/shadow.c:143 torvalds#20 kmsan_get_shadow_origin_ptr (address=0xffffffff8620d974 <init_task+1012>, size=4, store=false) at mm/kmsan/shadow.c:97 torvalds#21 0xffffffff81b1dbd2 in get_shadow_origin_ptr (addr=0xffffffff8620d974 <init_task+1012>, size=4, store=false) at mm/kmsan/instrumentation.c:36 torvalds#22 __msan_metadata_ptr_for_load_4 (addr=0xffffffff8620d974 <init_task+1012>) at mm/kmsan/instrumentation.c:91 torvalds#23 0xffffffff8149568f in rcu_preempt_read_enter () at kernel/rcu/tree_plugin.h:379 torvalds#24 __rcu_read_lock () at kernel/rcu/tree_plugin.h:402 torvalds#25 0xffffffff81b2054b in rcu_read_lock () at ./include/linux/rcupdate.h:748 torvalds#26 pfn_valid (pfn=<optimized out>) at ./include/linux/mmzone.h:2016 torvalds#27 kmsan_virt_addr_valid (addr=addr@entry=0xffffffff8620d974 <init_task+1012>) at ./arch/x86/include/asm/kmsan.h:82 torvalds#28 virt_to_page_or_null (vaddr=vaddr@entry=0xffffffff8620d974 <init_task+1012>) at mm/kmsan/shadow.c:75 torvalds#29 0xffffffff81b2023c in kmsan_get_metadata (address=0xffffffff8620d974 <init_task+1012>, is_origin=false) at mm/kmsan/shadow.c:143 torvalds#30 kmsan_get_shadow_origin_ptr (address=0xffffffff8620d974 <init_task+1012>, size=4, store=false) at mm/kmsan/shadow.c:97 torvalds#31 0xffffffff81b1dbd2 in get_shadow_origin_ptr (addr=0xffffffff8620d974 <init_task+1012>, size=4, store=false) at mm/kmsan/instrumentation.c:36 torvalds#32 __msan_metadata_ptr_for_load_4 (addr=0xffffffff8620d974 <init_task+1012>) at mm/kmsan/instrumentation.c:91 torvalds#33 0xffffffff8149568f in rcu_preempt_read_enter () at kernel/rcu/tree_plugin.h:379 torvalds#34 __rcu_read_lock () at kernel/rcu/tree_plugin.h:402 torvalds#35 0xffffffff81b2054b in rcu_read_lock () at ./include/linux/rcupdate.h:748 torvalds#36 pfn_valid (pfn=<optimized out>) at ./include/linux/mmzone.h:2016 torvalds#37 kmsan_virt_addr_valid (addr=addr@entry=0xffffffff8620d974 <init_task+1012>) at ./arch/x86/include/asm/kmsan.h:82 torvalds#38 virt_to_page_or_null (vaddr=vaddr@entry=0xffffffff8620d974 <init_task+1012>) at mm/kmsan/shadow.c:75 torvalds#39 0xffffffff81b2023c in kmsan_get_metadata (address=0xffffffff8620d974 <init_task+1012>, is_origin=false) at mm/kmsan/shadow.c:143 torvalds#40 kmsan_get_shadow_origin_ptr (address=0xffffffff8620d974 <init_task+1012>, size=4, store=false) at mm/kmsan/shadow.c:97 torvalds#41 0xffffffff81b1dbd2 in get_shadow_origin_ptr (addr=0xffffffff8620d974 <init_task+1012>, size=4, store=false) at mm/kmsan/instrumentation.c:36 torvalds#42 __msan_metadata_ptr_for_load_4 (addr=0xffffffff8620d974 <init_task+1012>) at mm/kmsan/instrumentation.c:91 torvalds#43 0xffffffff8149568f in rcu_preempt_read_enter () at kernel/rcu/tree_plugin.h:379 torvalds#44 __rcu_read_lock () at kernel/rcu/tree_plugin.h:402 torvalds#45 0xffffffff81b2054b in rcu_read_lock () at ./include/linux/rcupdate.h:748 torvalds#46 pfn_valid (pfn=<optimized out>) at ./include/linux/mmzone.h:2016 torvalds#47 kmsan_virt_addr_valid (addr=addr@entry=0xffffffff8620d974 <init_task+1012>) at ./arch/x86/include/asm/kmsan.h:82 torvalds#48 virt_to_page_or_null (vaddr=vaddr@entry=0xffffffff8620d974 <init_task+1012>) at mm/kmsan/shadow.c:75 torvalds#49 0xffffffff81b2023c in kmsan_get_metadata (address=0xffffffff8620d974 <init_task+1012>, is_origin=false) at mm/kmsan/shadow.c:143 torvalds#50 kmsan_get_shadow_origin_ptr (address=0xffffffff8620d974 <init_task+1012>, size=4, store=false) at mm/kmsan/shadow.c:97 torvalds#51 0xffffffff81b1dbd2 in get_shadow_origin_ptr (addr=0xffffffff8620d974 <init_task+1012>, size=4, store=false) at mm/kmsan/instrumentation.c:36 #52 __msan_metadata_ptr_for_load_4 (addr=0xffffffff8620d974 <init_task+1012>) at mm/kmsan/instrumentation.c:91 #53 0xffffffff8149568f in rcu_preempt_read_enter () at kernel/rcu/tree_plugin.h:379 torvalds#54 __rcu_read_lock () at kernel/rcu/tree_plugin.h:402 torvalds#55 0xffffffff81b2054b in rcu_read_lock () at ./include/linux/rcupdate.h:748 torvalds#56 pfn_valid (pfn=<optimized out>) at ./include/linux/mmzone.h:2016 torvalds#57 kmsan_virt_addr_valid (addr=addr@entry=0xffffffff8620d974 <init_task+1012>) at ./arch/x86/include/asm/kmsan.h:82 #58 virt_to_page_or_null (vaddr=vaddr@entry=0xffffffff8620d974 <init_task+1012>) at mm/kmsan/shadow.c:75 torvalds#59 0xffffffff81b2023c in kmsan_get_metadata (address=0xffffffff8620d974 <init_task+1012>, is_origin=false) at mm/kmsan/shadow.c:143 torvalds#60 kmsan_get_shadow_origin_ptr (address=0xffffffff8620d974 <init_task+1012>, size=4, store=false) at mm/kmsan/shadow.c:97 torvalds#61 0xffffffff81b1dbd2 in get_shadow_origin_ptr (addr=0xffffffff8620d974 <init_task+1012>, size=4, store=false) at mm/kmsan/instrumentation.c:36 torvalds#62 __msan_metadata_ptr_for_load_4 (addr=0xffffffff8620d974 <init_task+1012>) at mm/kmsan/instrumentation.c:91 torvalds#63 0xffffffff8149568f in rcu_preempt_read_enter () at kernel/rcu/tree_plugin.h:379 torvalds#64 __rcu_read_lock () at kernel/rcu/tree_plugin.h:402 torvalds#65 0xffffffff81b2054b in rcu_read_lock () at ./include/linux/rcupdate.h:748 torvalds#66 pfn_valid (pfn=<optimized out>) at ./include/linux/mmzone.h:2016 torvalds#67 kmsan_virt_addr_valid (addr=addr@entry=0xffffffff8620d974 <init_task+1012>) at ./arch/x86/include/asm/kmsan.h:82 torvalds#68 virt_to_page_or_null (vaddr=vaddr@entry=0xffffffff8620d974 <init_task+1012>) at mm/kmsan/shadow.c:75 torvalds#69 0xffffffff81b2023c in kmsan_get_metadata (address=0xffffffff8620d974 <init_task+1012>, is_origin=false) at mm/kmsan/shadow.c:143 #70 kmsan_get_shadow_origin_ptr (address=0xffffffff8620d974 <init_task+1012>, size=4, store=false) at mm/kmsan/shadow.c:97 torvalds#71 0xffffffff81b1dbd2 in get_shadow_origin_ptr (addr=0xffffffff8620d974 <init_task+1012>, size=4, store=false) at mm/kmsan/instrumentation.c:36 torvalds#72 __msan_metadata_ptr_for_load_4 (addr=0xffffffff8620d974 <init_task+1012>) at mm/kmsan/instrumentation.c:91 torvalds#73 0xffffffff8149568f in rcu_preempt_read_enter () at kernel/rcu/tree_plugin.h:379 torvalds#74 __rcu_read_lock () at kernel/rcu/tree_plugin.h:402 torvalds#75 0xffffffff81b2054b in rcu_read_lock () at ./include/linux/rcupdate.h:748 torvalds#76 pfn_valid (pfn=<optimized out>) at ./include/linux/mmzone.h:2016 torvalds#77 kmsan_virt_addr_valid (addr=addr@entry=0xffffffff86203c90) at ./arch/x86/include/asm/kmsan.h:82 torvalds#78 virt_to_page_or_null (vaddr=vaddr@entry=0xffffffff86203c90) at mm/kmsan/shadow.c:75 torvalds#79 0xffffffff81b2023c in kmsan_get_metadata (address=0xffffffff86203c90, is_origin=false) at mm/kmsan/shadow.c:143 torvalds#80 kmsan_get_shadow_origin_ptr (address=0xffffffff86203c90, size=8, store=false) at mm/kmsan/shadow.c:97 torvalds#81 0xffffffff81b1dc72 in get_shadow_origin_ptr (addr=0xffffffff8620d974 <init_task+1012>, size=8, store=false) at mm/kmsan/instrumentation.c:36 torvalds#82 __msan_metadata_ptr_for_load_8 (addr=0xffffffff8620d974 <init_task+1012>) at mm/kmsan/instrumentation.c:92 torvalds#83 0xffffffff814fdb9e in filter_irq_stacks (entries=<optimized out>, nr_entries=4) at kernel/stacktrace.c:397 torvalds#84 0xffffffff829520e8 in stack_depot_save_flags (entries=0xffffffff8620d974 <init_task+1012>, nr_entries=4, alloc_flags=0, depot_flags=0) at lib/stackdepot.c:500 torvalds#85 0xffffffff81b1e560 in __msan_poison_alloca (address=0xffffffff86203da0, size=24, descr=<optimized out>) at mm/kmsan/instrumentation.c:285 torvalds#86 0xffffffff8562821c in _printk (fmt=0xffffffff85f191a5 "\0016Attempting lock1") at kernel/printk/printk.c:2324 torvalds#87 0xffffffff81942aa2 in kmem_cache_create_usercopy (name=0xffffffff85f18903 "mm_struct", size=1296, align=0, flags=270336, useroffset=<optimized out>, usersize=<optimized out>, ctor=0x0 <fixed_percpu_data>) at mm/slab_common.c:296 torvalds#88 0xffffffff86f337a0 in mm_cache_init () at kernel/fork.c:3262 torvalds#89 0xffffffff86eacb8e in start_kernel () at init/main.c:932 torvalds#90 0xffffffff86ecdf94 in x86_64_start_reservations (real_mode_data=0x140e0 <exception_stacks+28896> <error: Cannot access memory at address 0x140e0>) at arch/x86/kernel/head64.c:555 torvalds#91 0xffffffff86ecde9b in x86_64_start_kernel (real_mode_data=0x140e0 <exception_stacks+28896> <error: Cannot access memory at address 0x140e0>) at arch/x86/kernel/head64.c:536 torvalds#92 0xffffffff810001d3 in secondary_startup_64 () at /pool/workspace/linux/arch/x86/kernel/head_64.S:461 torvalds#93 0x0000000000000000 in ??

[ Upstream commit b16904f ] With latest upstream llvm18, the following test cases failed: $ ./test_progs -j torvalds#13/2 bpf_cookie/multi_kprobe_link_api:FAIL torvalds#13/3 bpf_cookie/multi_kprobe_attach_api:FAIL torvalds#13 bpf_cookie:FAIL torvalds#77 fentry_fexit:FAIL torvalds#78/1 fentry_test/fentry:FAIL torvalds#78 fentry_test:FAIL torvalds#82/1 fexit_test/fexit:FAIL torvalds#82 fexit_test:FAIL torvalds#112/1 kprobe_multi_test/skel_api:FAIL torvalds#112/2 kprobe_multi_test/link_api_addrs:FAIL [...] torvalds#112 kprobe_multi_test:FAIL torvalds#356/17 test_global_funcs/global_func17:FAIL torvalds#356 test_global_funcs:FAIL Further analysis shows llvm upstream patch [1] is responsible for the above failures. For example, for function bpf_fentry_test7() in net/bpf/test_run.c, without [1], the asm code is: 0000000000000400 <bpf_fentry_test7>: 400: f3 0f 1e fa endbr64 404: e8 00 00 00 00 callq 0x409 <bpf_fentry_test7+0x9> 409: 48 89 f8 movq %rdi, %rax 40c: c3 retq 40d: 0f 1f 00 nopl (%rax) ... and with [1], the asm code is: 0000000000005d20 <bpf_fentry_test7.specialized.1>: 5d20: e8 00 00 00 00 callq 0x5d25 <bpf_fentry_test7.specialized.1+0x5> 5d25: c3 retq ... and <bpf_fentry_test7.specialized.1> is called instead of <bpf_fentry_test7> and this caused test failures for torvalds#13/torvalds#77 etc. except torvalds#356. For test case torvalds#356/17, with [1] (progs/test_global_func17.c)), the main prog looks like: 0000000000000000 <global_func17>: 0: b4 00 00 00 2a 00 00 00 w0 = 0x2a 1: 95 00 00 00 00 00 00 00 exit ... which passed verification while the test itself expects a verification failure. Let us add 'barrier_var' style asm code in both places to prevent function specialization which caused selftests failure. [1] llvm/llvm-project#72903 Signed-off-by: Yonghong Song <yonghong.song@linux.dev> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net> Link: https://lore.kernel.org/bpf/20231127050342.1945270-1-yonghong.song@linux.dev Signed-off-by: Sasha Levin <sashal@kernel.org>

There are so many "ENOTSUPP" (-524) errors when running BPF selftests on a Loongarch platform since lacking BPF trampoline on Loongarch: ''' test_d_path_basic:PASS:setup 0 nsec libbpf: prog 'prog_stat': failed to attach: unknown error (-524) libbpf: prog 'prog_stat': failed to auto-attach: -524 test_d_path_basic:FAIL:setup attach failed: -524 torvalds#77/1 d_path/basic:FAIL torvalds#77/2 d_path/check_rdonly_mem:OK torvalds#77/3 d_path/check_alloc_mem:OK torvalds#77 d_path:FAIL ... ... test_module_attach:PASS:skel_open 0 nsec test_module_attach:PASS:set_attach_target 0 nsec test_module_attach:PASS:set_attach_target_explicit 0 nsec test_module_attach:PASS:skel_load 0 nsec libbpf: prog 'handle_fentry': failed to attach: unknown error (-524) libbpf: prog 'handle_fentry': failed to auto-attach: -524 test_module_attach:FAIL:skel_attach skeleton attach failed: -524 torvalds#167 module_attach:FAIL ... ... ringbuf_subtest:PASS:skel_open 0 nsec ringbuf_subtest:PASS:skel_load 0 nsec ringbuf_subtest:PASS:rw_cons_pos 0 nsec ringbuf_subtest:PASS:rw_extend 0 nsec ringbuf_subtest:PASS:exec_cons_pos_protect 0 nsec ringbuf_subtest:PASS:unmap_rw 0 nsec ringbuf_subtest:PASS:wr_prod_pos 0 nsec ringbuf_subtest:PASS:wr_prod_pos_err 0 nsec ringbuf_subtest:PASS:wr_data_page_one 0 nsec ringbuf_subtest:PASS:wr_data_page_one_err 0 nsec ringbuf_subtest:PASS:wr_data_page_two 0 nsec ringbuf_subtest:PASS:wr_data_page_all 0 nsec ringbuf_subtest:PASS:ro_prod_pos 0 nsec ringbuf_subtest:PASS:write_protect 0 nsec ringbuf_subtest:PASS:exec_protect 0 nsec ringbuf_subtest:PASS:ro_remap 0 nsec ringbuf_subtest:PASS:unmap_ro 0 nsec ringbuf_subtest:PASS:ro_prod_pos 0 nsec ringbuf_subtest:PASS:write_protect 0 nsec ringbuf_subtest:PASS:exec_protect 0 nsec ringbuf_subtest:PASS:ro_remap 0 nsec ringbuf_subtest:PASS:unmap_ro 0 nsec ringbuf_subtest:PASS:ringbuf_create 0 nsec ringbuf_subtest:FAIL:skel_attach skeleton attachment failed: -1 torvalds#277/1 ringbuf/ringbuf:FAIL torvalds#277/2 ringbuf/ringbuf_n:SKIP torvalds#277/3 ringbuf/ringbuf_map_key:SKIP torvalds#277 ringbuf:FAIL ... ... test_test_bprm_opts:PASS:skel_load 0 nsec libbpf: prog 'secure_exec': failed to attach: unknown error (-524) libbpf: prog 'secure_exec': failed to auto-attach: -524 test_test_bprm_opts:FAIL:attach attach failed: -524 torvalds#382 test_bprm_opts:FAIL ... ... test_test_ima:PASS:skel_load 0 nsec test_test_ima:PASS:ringbuf 0 nsec libbpf: prog 'bprm_committed_creds': failed to attach: \ unknown error (-524) libbpf: prog 'bprm_committed_creds': failed to auto-attach: -524 test_test_ima:FAIL:attach attach failed: -524 torvalds#384 test_ima:FAIL ... ... test_trace_ext:PASS:setup 0 nsec test_trace_ext:PASS:setup 0 nsec test_trace_ext:PASS:setup 0 nsec test_trace_ext:PASS:setup 0 nsec libbpf: prog 'test_pkt_md_access_new': failed to attach: \ unknown error (-524) libbpf: prog 'test_pkt_md_access_new': failed to auto-attach: -524 test_trace_ext:FAIL:setup freplace/test_pkt_md_access attach failed: -524 torvalds#397 trace_ext:FAIL ''' This patch uses ASSERT_OK() instead of CHECK() to skip these "ENOTSUPP" errors. With this change, the new output of these selftests look like: ''' torvalds#77/1 d_path/basic:SKIP torvalds#77/2 d_path/check_rdonly_mem:OK torvalds#77/3 d_path/check_alloc_mem:OK torvalds#77 d_path:OK (SKIP: 1/3) ... ... torvalds#167 module_attach:SKIP ... ... torvalds#277/1 ringbuf/ringbuf:SKIP torvalds#277/2 ringbuf/ringbuf_n:SKIP torvalds#277/3 ringbuf/ringbuf_map_key:SKIP torvalds#277 ringbuf:SKIP ... ... torvalds#382 test_bprm_opts:SKIP ... ... torvalds#384 test_ima:SKIP ... ... torvalds#397 trace_ext:SKIP ''' Signed-off-by: Geliang Tang <tanggeliang@kylinos.cn>

Add 3 test cases for skb dynptr used in tp_btf: - test_dynptr_skb_tp_btf: use skb dynptr in tp_btf and make sure it is read-only. - skb_invalid_ctx_fentry/skb_invalid_ctx_fexit: bpf_dynptr_from_skb should fail in fentry/fexit. In test_dynptr_skb_tp_btf, to trigger the tracepoint in kfree_skb, test_pkt_access is used for its test_run, as in kfree_skb.c. Because the test process is different from others, a new setup type is defined, i.e., SETUP_SKB_PROG_TP. The result is like: $ ./test_progs -t 'dynptr/test_dynptr_skb_tp_btf' torvalds#77/14 dynptr/test_dynptr_skb_tp_btf:OK torvalds#77 dynptr:OK torvalds#120 kfunc_dynptr_param:OK Summary: 2/1 PASSED, 0 SKIPPED, 0 FAILED $ ./test_progs -t 'dynptr/skb_invalid_ctx_f' torvalds#77/83 dynptr/skb_invalid_ctx_fentry:OK torvalds#77/84 dynptr/skb_invalid_ctx_fexit:OK torvalds#77 dynptr:OK torvalds#120 kfunc_dynptr_param:OK Summary: 2/2 PASSED, 0 SKIPPED, 0 FAILED Also fix two coding style nits (change spaces to tabs). Signed-off-by: Philo Lu <lulie@linux.alibaba.com>

Fixed typo in comment

b35078a

Changed "then" to "than" No functional change

hzhuang1 pushed a commit to hzhuang1/linux that referenced this pull request Jun 2, 2015

Merge pull request torvalds#77 from 96boards/working-wifi-up-down

a12e4dc

dts: hikey: remove always-on in wlan_en regulator

logic10492 pushed a commit to logic10492/linux-amd-zen2 that referenced this pull request Jan 18, 2024

Merge pull request torvalds#77 from sched-ext/fix_notext_build

fdee025

scx: Fix !CONFIG_SCHED_CLASS_EXT builds

Provide feedback

Saved searches

Use saved searches to filter your results more quickly

Fixed typo in comment #77

Fixed typo in comment #77

kiteflyingmonkey commented Mar 7, 2014

kiteflyingmonkey commented Mar 7, 2014

Fixed typo in comment #77

Are you sure you want to change the base?

Fixed typo in comment #77

Conversation

kiteflyingmonkey commented Mar 7, 2014

kiteflyingmonkey commented Mar 7, 2014