Provide a From<AllocError> impl for KernelError #64
Conversation
This file contains bidirectional Unicode text that may be interpreted or compiled differently than what appears below. To review, open the file in an editor that reveals hidden Unicode characters.
Learn more about bidirectional Unicode characters
This makes the try_alloc functions trivial, so we inline them.
ojeda
pushed a commit
that referenced
this pull request
Jan 30, 2022
arm32 uses software to simulate the instruction replaced
by kprobe. some instructions may be simulated by constructing
assembly functions. therefore, before executing instruction
simulation, it is necessary to construct assembly function
execution environment in C language through binding registers.
after kasan is enabled, the register binding relationship will
be destroyed, resulting in instruction simulation errors and
causing kernel panic.
the kprobe emulate instruction function is distributed in three
files: actions-common.c actions-arm.c actions-thumb.c, so disable
KASAN when compiling these files.
for example, use kprobe insert on cap_capable+20 after kasan
enabled, the cap_capable assembly code is as follows:
<cap_capable>:
e92d47f0 push {r4, r5, r6, r7, r8, r9, sl, lr}
e1a05000 mov r5, r0
e280006c add r0, r0, #108 ; 0x6c
e1a04001 mov r4, r1
e1a06002 mov r6, r2
e59fa090 ldr sl, [pc, #144] ;
ebfc7bf8 bl c03aa4b4 <__asan_load4>
e595706c ldr r7, [r5, #108] ; 0x6c
e2859014 add r9, r5, #20
......
The emulate_ldr assembly code after enabling kasan is as follows:
c06f1384 <emulate_ldr>:
e92d47f0 push {r4, r5, r6, r7, r8, r9, sl, lr}
e282803c add r8, r2, #60 ; 0x3c
e1a05000 mov r5, r0
e7e37855 ubfx r7, r5, #16, #4
e1a00008 mov r0, r8
e1a09001 mov r9, r1
e1a04002 mov r4, r2
ebf35462 bl c03c6530 <__asan_load4>
e357000f cmp r7, #15
e7e36655 ubfx r6, r5, #12, #4
e205a00f and sl, r5, #15
0a000001 beq c06f13bc <emulate_ldr+0x38>
e0840107 add r0, r4, r7, lsl #2
ebf3545c bl c03c6530 <__asan_load4>
e084010a add r0, r4, sl, lsl #2
ebf3545a bl c03c6530 <__asan_load4>
e2890010 add r0, r9, #16
ebf35458 bl c03c6530 <__asan_load4>
e5990010 ldr r0, [r9, #16]
e12fff30 blx r0
e356000f cm r6, #15
1a000014 bne c06f1430 <emulate_ldr+0xac>
e1a06000 mov r6, r0
e2840040 add r0, r4, #64 ; 0x40
......
when running in emulate_ldr to simulate the ldr instruction, panic
occurred, and the log is as follows:
Unable to handle kernel NULL pointer dereference at virtual address
00000090
pgd = ecb46400
[00000090] *pgd=2e0fa003, *pmd=00000000
Internal error: Oops: 206 [#1] SMP ARM
PC is at cap_capable+0x14/0xb0
LR is at emulate_ldr+0x50/0xc0
psr: 600d0293 sp : ecd63af8 ip : 00000004 fp : c0a7c30c
r10: 00000000 r9 : c30897f4 r8 : ecd63cd4
r7 : 0000000f r6 : 0000000a r5 : e59fa090 r4 : ecd63c98
r3 : c06ae294 r2 : 00000000 r1 : b7611300 r0 : bf4ec008
Flags: nZCv IRQs off FIQs on Mode SVC_32 ISA ARM Segment user
Control: 32c5387d Table: 2d546400 DAC: 55555555
Process bash (pid: 1643, stack limit = 0xecd60190)
(cap_capable) from (kprobe_handler+0x218/0x340)
(kprobe_handler) from (kprobe_trap_handler+0x24/0x48)
(kprobe_trap_handler) from (do_undefinstr+0x13c/0x364)
(do_undefinstr) from (__und_svc_finish+0x0/0x30)
(__und_svc_finish) from (cap_capable+0x18/0xb0)
(cap_capable) from (cap_vm_enough_memory+0x38/0x48)
(cap_vm_enough_memory) from
(security_vm_enough_memory_mm+0x48/0x6c)
(security_vm_enough_memory_mm) from
(copy_process.constprop.5+0x16b4/0x25c8)
(copy_process.constprop.5) from (_do_fork+0xe8/0x55c)
(_do_fork) from (SyS_clone+0x1c/0x24)
(SyS_clone) from (__sys_trace_return+0x0/0x10)
Code: 0050a0e1 6c0080e2 0140a0e1 0260a0e1 (f801f0e7)
Fixes: 35aa1df ("ARM kprobes: instruction single-stepping support")
Fixes: 4210157 ("ARM: 9017/2: Enable KASan for ARM")
Signed-off-by: huangshaobo <huangshaobo6@huawei.com>
Acked-by: Ard Biesheuvel <ardb@kernel.org>
Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
psomas
pushed a commit
to psomas/linux-rs
that referenced
this pull request
Dec 30, 2022
We use uprobe in aarch64_be, which we found the tracee task would exit due to SIGILL when we enable the uprobe trace. We can see the replace inst from uprobe is not correct in aarch big-endian. As in Armv8-A, instruction fetches are always treated as little-endian, we should treat the UPROBE_SWBP_INSN as little-endian。 The test case is as following。 bash-4.4# ./mqueue_test_aarchbe 1 1 2 1 10 > /dev/null & bash-4.4# cd /sys/kernel/debug/tracing/ bash-4.4# echo 'p:test /mqueue_test_aarchbe:0xc30 %x0 %x1' > uprobe_events bash-4.4# echo 1 > events/uprobes/enable bash-4.4# bash-4.4# ps PID TTY TIME CMD 140 ? 00:00:01 bash 237 ? 00:00:00 ps [1]+ Illegal instruction ./mqueue_test_aarchbe 1 1 2 1 100 > /dev/null which we debug use gdb as following: bash-4.4# gdb attach 155 (gdb) disassemble send Dump of assembler code for function send: 0x0000000000400c30 <+0>: .inst 0xa00020d4 ; undefined 0x0000000000400c34 <+4>: mov x29, sp 0x0000000000400c38 <+8>: str w0, [sp, Rust-for-Linux#28] 0x0000000000400c3c <+12>: strb w1, [sp, Rust-for-Linux#27] 0x0000000000400c40 <+16>: str xzr, [sp, Rust-for-Linux#40] 0x0000000000400c44 <+20>: str xzr, [sp, Rust-for-Linux#48] 0x0000000000400c48 <+24>: add x0, sp, #0x1b 0x0000000000400c4c <+28>: mov w3, #0x0 // #0 0x0000000000400c50 <+32>: mov x2, #0x1 // Rust-for-Linux#1 0x0000000000400c54 <+36>: mov x1, x0 0x0000000000400c58 <+40>: ldr w0, [sp, Rust-for-Linux#28] 0x0000000000400c5c <+44>: bl 0x405e10 <mq_send> 0x0000000000400c60 <+48>: str w0, [sp, Rust-for-Linux#60] 0x0000000000400c64 <+52>: ldr w0, [sp, Rust-for-Linux#60] 0x0000000000400c68 <+56>: ldp x29, x30, [sp], Rust-for-Linux#64 0x0000000000400c6c <+60>: ret End of assembler dump. (gdb) info b No breakpoints or watchpoints. (gdb) c Continuing. Program received signal SIGILL, Illegal instruction. 0x0000000000400c30 in send () (gdb) x/10x 0x400c30 0x400c30 <send>: 0xd42000a0 0xfd030091 0xe01f00b9 0xe16f0039 0x400c40 <send+16>: 0xff1700f9 0xff1b00f9 0xe06f0091 0x03008052 0x400c50 <send+32>: 0x220080d2 0xe10300aa (gdb) disassemble 0x400c30 Dump of assembler code for function send: => 0x0000000000400c30 <+0>: .inst 0xa00020d4 ; undefined 0x0000000000400c34 <+4>: mov x29, sp 0x0000000000400c38 <+8>: str w0, [sp, Rust-for-Linux#28] 0x0000000000400c3c <+12>: strb w1, [sp, Rust-for-Linux#27] 0x0000000000400c40 <+16>: str xzr, [sp, Rust-for-Linux#40] Signed-off-by: junhua huang <huang.junhua@zte.com.cn> Link: https://lore.kernel.org/r/202212021511106844809@zte.com.cn Signed-off-by: Will Deacon <will@kernel.org>
ojeda
pushed a commit
that referenced
this pull request
Jan 16, 2023
Map the leaf SPTE when handling a TDP MMU page fault if and only if the target level is reached. A recent commit reworked the retry logic and incorrectly assumed that walking SPTEs would never "fail", as the loop either bails (retries) or installs parent SPs. However, the iterator itself will bail early if it detects a frozen (REMOVED) SPTE when stepping down. The TDP iterator also rereads the current SPTE before stepping down specifically to avoid walking into a part of the tree that is being removed, which means it's possible to terminate the loop without the guts of the loop observing the frozen SPTE, e.g. if a different task zaps a parent SPTE between the initial read and try_step_down()'s refresh. Mapping a leaf SPTE at the wrong level results in all kinds of badness as page table walkers interpret the SPTE as a page table, not a leaf, and walk into the weeds. ------------[ cut here ]------------ WARNING: CPU: 1 PID: 1025 at arch/x86/kvm/mmu/tdp_mmu.c:1070 kvm_tdp_mmu_map+0x481/0x510 Modules linked in: kvm_intel CPU: 1 PID: 1025 Comm: nx_huge_pages_t Tainted: G W 6.1.0-rc4+ #64 Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS 0.0.0 02/06/2015 RIP: 0010:kvm_tdp_mmu_map+0x481/0x510 RSP: 0018:ffffc9000072fba8 EFLAGS: 00010286 RAX: 0000000000000000 RBX: ffffc9000072fcc0 RCX: 0000000000000027 RDX: 0000000000000027 RSI: 00000000ffffdfff RDI: ffff888277c5b4c8 RBP: ffff888107d45a10 R08: ffff888277c5b4c0 R09: ffffc9000072fa48 R10: 0000000000000001 R11: 0000000000000001 R12: ffffc9000073a0e0 R13: ffff88810fc54800 R14: ffff888107d1ae60 R15: ffff88810fc54f90 FS: 00007fba9f853740(0000) GS:ffff888277c40000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 0000000000000000 CR3: 000000010aa7a003 CR4: 0000000000172ea0 Call Trace: <TASK> kvm_tdp_page_fault+0x10c/0x130 kvm_mmu_page_fault+0x103/0x680 vmx_handle_exit+0x132/0x5a0 [kvm_intel] vcpu_enter_guest+0x60c/0x16f0 kvm_arch_vcpu_ioctl_run+0x1e2/0x9d0 kvm_vcpu_ioctl+0x271/0x660 __x64_sys_ioctl+0x80/0xb0 do_syscall_64+0x2b/0x50 entry_SYSCALL_64_after_hwframe+0x46/0xb0 </TASK> ---[ end trace 0000000000000000 ]--- Invalid SPTE change: cannot replace a present leaf SPTE with another present leaf SPTE mapping a different PFN! as_id: 0 gfn: 100200 old_spte: 600000112400bf3 new_spte: 6000001126009f3 level: 2 ------------[ cut here ]------------ kernel BUG at arch/x86/kvm/mmu/tdp_mmu.c:559! invalid opcode: 0000 [#1] SMP CPU: 1 PID: 1025 Comm: nx_huge_pages_t Tainted: G W 6.1.0-rc4+ #64 Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS 0.0.0 02/06/2015 RIP: 0010:__handle_changed_spte.cold+0x95/0x9c RSP: 0018:ffffc9000072faf8 EFLAGS: 00010246 RAX: 00000000000000c1 RBX: ffffc90000731000 RCX: 0000000000000027 RDX: 0000000000000000 RSI: 00000000ffffdfff RDI: ffff888277c5b4c8 RBP: 0600000112400bf3 R08: ffff888277c5b4c0 R09: ffffc9000072f9a0 R10: 0000000000000001 R11: 0000000000000001 R12: 06000001126009f3 R13: 0000000000000002 R14: 0000000012600901 R15: 0000000012400b01 FS: 00007fba9f853740(0000) GS:ffff888277c40000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 0000000000000000 CR3: 000000010aa7a003 CR4: 0000000000172ea0 Call Trace: <TASK> kvm_tdp_mmu_map+0x3b0/0x510 kvm_tdp_page_fault+0x10c/0x130 kvm_mmu_page_fault+0x103/0x680 vmx_handle_exit+0x132/0x5a0 [kvm_intel] vcpu_enter_guest+0x60c/0x16f0 kvm_arch_vcpu_ioctl_run+0x1e2/0x9d0 kvm_vcpu_ioctl+0x271/0x660 __x64_sys_ioctl+0x80/0xb0 do_syscall_64+0x2b/0x50 entry_SYSCALL_64_after_hwframe+0x46/0xb0 </TASK> Modules linked in: kvm_intel ---[ end trace 0000000000000000 ]--- Fixes: 63d28a2 ("KVM: x86/mmu: simplify kvm_tdp_mmu_map flow when guest has to retry") Cc: Robert Hoo <robert.hu@linux.intel.com> Signed-off-by: Sean Christopherson <seanjc@google.com> Message-Id: <20221213033030.83345-3-seanjc@google.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
ojeda
pushed a commit
that referenced
this pull request
Jan 16, 2023
Don't install a leaf TDP MMU SPTE if the parent page's level doesn't match the target level of the fault, and instead have the vCPU retry the faulting instruction after warning. Continuing on is completely unnecessary as the absolute worst case scenario of retrying is DoSing the vCPU, whereas continuing on all but guarantees bigger explosions, e.g. ------------[ cut here ]------------ kernel BUG at arch/x86/kvm/mmu/tdp_mmu.c:559! invalid opcode: 0000 [#1] SMP CPU: 1 PID: 1025 Comm: nx_huge_pages_t Tainted: G W 6.1.0-rc4+ #64 Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS 0.0.0 02/06/2015 RIP: 0010:__handle_changed_spte.cold+0x95/0x9c RSP: 0018:ffffc9000072faf8 EFLAGS: 00010246 RAX: 00000000000000c1 RBX: ffffc90000731000 RCX: 0000000000000027 RDX: 0000000000000000 RSI: 00000000ffffdfff RDI: ffff888277c5b4c8 RBP: 0600000112400bf3 R08: ffff888277c5b4c0 R09: ffffc9000072f9a0 R10: 0000000000000001 R11: 0000000000000001 R12: 06000001126009f3 R13: 0000000000000002 R14: 0000000012600901 R15: 0000000012400b01 FS: 00007fba9f853740(0000) GS:ffff888277c40000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 0000000000000000 CR3: 000000010aa7a003 CR4: 0000000000172ea0 Call Trace: <TASK> kvm_tdp_mmu_map+0x3b0/0x510 kvm_tdp_page_fault+0x10c/0x130 kvm_mmu_page_fault+0x103/0x680 vmx_handle_exit+0x132/0x5a0 [kvm_intel] vcpu_enter_guest+0x60c/0x16f0 kvm_arch_vcpu_ioctl_run+0x1e2/0x9d0 kvm_vcpu_ioctl+0x271/0x660 __x64_sys_ioctl+0x80/0xb0 do_syscall_64+0x2b/0x50 entry_SYSCALL_64_after_hwframe+0x46/0xb0 </TASK> Modules linked in: kvm_intel ---[ end trace 0000000000000000 ]--- Signed-off-by: Sean Christopherson <seanjc@google.com> Message-Id: <20221213033030.83345-5-seanjc@google.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
ojeda
pushed a commit
that referenced
this pull request
May 31, 2023
'__net_initdata' becomes a no-op with CONFIG_NET_NS=y, but when this option is disabled it becomes '__initdata', which means the data can be freed after the initialization phase. This annotation is obviously incorrect for the devlink net device notifier block which is still registered after the initialization phase [1]. Fix this crash by removing the '__net_initdata' annotation. [1] general protection fault, probably for non-canonical address 0xcccccccccccccccc: 0000 [#1] PREEMPT SMP CPU: 3 PID: 117 Comm: (udev-worker) Not tainted 6.4.0-rc1-custom-gdf0acdc59b09 #64 Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.16.2-1.fc37 04/01/2014 RIP: 0010:notifier_call_chain+0x58/0xc0 [...] Call Trace: <TASK> dev_set_mac_address+0x85/0x120 dev_set_mac_address_user+0x30/0x50 do_setlink+0x219/0x1270 rtnl_setlink+0xf7/0x1a0 rtnetlink_rcv_msg+0x142/0x390 netlink_rcv_skb+0x58/0x100 netlink_unicast+0x188/0x270 netlink_sendmsg+0x214/0x470 __sys_sendto+0x12f/0x1a0 __x64_sys_sendto+0x24/0x30 do_syscall_64+0x38/0x80 entry_SYSCALL_64_after_hwframe+0x63/0xcd Fixes: e93c937 ("devlink: change per-devlink netdev notifier to static one") Reported-by: Marek Szyprowski <m.szyprowski@samsung.com> Closes: https://lore.kernel.org/netdev/600ddf9e-589a-2aa0-7b69-a438f833ca10@samsung.com/ Tested-by: Marek Szyprowski <m.szyprowski@samsung.com> Signed-off-by: Ido Schimmel <idosch@nvidia.com> Reviewed-by: Jiri Pirko <jiri@nvidia.com> Reviewed-by: Simon Horman <simon.horman@corigine.com> Link: https://lore.kernel.org/r/20230515162925.1144416-1-idosch@nvidia.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
ojeda
pushed a commit
that referenced
this pull request
Aug 18, 2024
copy_fd_bitmaps(new, old, count) is expected to copy the first count/BITS_PER_LONG bits from old->full_fds_bits[] and fill the rest with zeroes. What it does is copying enough words (BITS_TO_LONGS(count/BITS_PER_LONG)), then memsets the rest. That works fine, *if* all bits past the cutoff point are clear. Otherwise we are risking garbage from the last word we'd copied. For most of the callers that is true - expand_fdtable() has count equal to old->max_fds, so there's no open descriptors past count, let alone fully occupied words in ->open_fds[], which is what bits in ->full_fds_bits[] correspond to. The other caller (dup_fd()) passes sane_fdtable_size(old_fdt, max_fds), which is the smallest multiple of BITS_PER_LONG that covers all opened descriptors below max_fds. In the common case (copying on fork()) max_fds is ~0U, so all opened descriptors will be below it and we are fine, by the same reasons why the call in expand_fdtable() is safe. Unfortunately, there is a case where max_fds is less than that and where we might, indeed, end up with junk in ->full_fds_bits[] - close_range(from, to, CLOSE_RANGE_UNSHARE) with * descriptor table being currently shared * 'to' being above the current capacity of descriptor table * 'from' being just under some chunk of opened descriptors. In that case we end up with observably wrong behaviour - e.g. spawn a child with CLONE_FILES, get all descriptors in range 0..127 open, then close_range(64, ~0U, CLOSE_RANGE_UNSHARE) and watch dup(0) ending up with descriptor #128, despite #64 being observably not open. The minimally invasive fix would be to deal with that in dup_fd(). If this proves to add measurable overhead, we can go that way, but let's try to fix copy_fd_bitmaps() first. * new helper: bitmap_copy_and_expand(to, from, bits_to_copy, size). * make copy_fd_bitmaps() take the bitmap size in words, rather than bits; it's 'count' argument is always a multiple of BITS_PER_LONG, so we are not losing any information, and that way we can use the same helper for all three bitmaps - compiler will see that count is a multiple of BITS_PER_LONG for the large ones, so it'll generate plain memcpy()+memset(). Reproducer added to tools/testing/selftests/core/close_range_test.c Cc: stable@vger.kernel.org Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Sign up for free
to join this conversation on GitHub.
Already have an account?
Sign in to comment
Add this suggestion to a batch that can be applied as a single commit.
This suggestion is invalid because no changes were made to the code.
Suggestions cannot be applied while the pull request is closed.
Suggestions cannot be applied while viewing a subset of changes.
Only one suggestion per line can be applied in a batch.
Add this suggestion to a batch that can be applied as a single commit.
Applying suggestions on deleted lines is not supported.
You must change the existing code in this line in order to create a valid suggestion.
Outdated suggestions cannot be applied.
This suggestion has been applied or marked resolved.
Suggestions cannot be applied from pending reviews.
Suggestions cannot be applied on multi-line comments.
Suggestions cannot be applied while the pull request is queued to merge.
Suggestion cannot be applied right now. Please check back later.
This makes the try_alloc functions trivial, so we inline them.