Sync up with Linus #48
Merged
Conversation
This file contains bidirectional Unicode text that may be interpreted or compiled differently than what appears below. To review, open the file in an editor that reveals hidden Unicode characters.
Learn more about bidirectional Unicode characters
Set device data before snd_soc_register_platform/component. Otherwise, it will use NULL pointer if user calls unbind -> bind or rmmod -> insmod Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Signed-off-by: Mark Brown <broonie@kernel.org>
According to i.MX Reference Manual, the bit-clock frequency generated by SSI must be never greater than 1/5 of the peripheral clock frequency. This peripheral clock, however, is not baudclk but the IPG clock (i.e. ssi_private->clk in the fsl_ssi driver). So this patch just simply fixes the incorrect limitation applied to the bit clock (baudclk) rate. Signed-off-by: Nicolin Chen <nicoleotsuka@gmail.com> Signed-off-by: Mark Brown <broonie@kernel.org>
The max98357a driver depends on GPIOLIB. This may cause the following build failure. sound/soc/codecs/max98357a.c: In function 'max98357a_daiops_trigger': sound/soc/codecs/max98357a.c:30:3: error: implicit declaration of function 'gpiod_set_value' sound/soc/codecs/max98357a.c: In function 'max98357a_codec_probe': sound/soc/codecs/max98357a.c:55:2: error: implicit declaration of function 'devm_gpiod_get' sound/soc/codecs/max98357a.c:61:2: error: implicit declaration of function 'gpiod_direction_output' Seen with mips:allmodconfig as well as various randconfig builds. Fixes: af5adf1 ("ASoC: max98357a: Add MAX98357A codec driver") Cc: Kenneth Westfield <kwestfie@codeaurora.org> Signed-off-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Mark Brown <broonie@kernel.org>
This fixes the following compilation errors: sound/soc/codecs/max98357a.c: In function ‘max98357a_daiops_trigger’: sound/soc/codecs/max98357a.c:30:3: error: implicit declaration of function ‘gpiod_set_value’ [-Werror=implicit-function-declaration] sound/soc/codecs/max98357a.c: In function ‘max98357a_codec_probe’: sound/soc/codecs/max98357a.c:55:2: error: implicit declaration of function ‘devm_gpiod_get’ [-Werror=implicit-function-declaration] sound/soc/codecs/max98357a.c:61:2: error: implicit declaration of function ‘gpiod_direction_output’ [-Werror=implicit-function-declaration] cc1: some warnings being treated as errors Signed-off-by: Vincent Stehlé <vincent.stehle@laposte.net> Cc: Kenneth Westfield <kwestfie@codeaurora.org> Cc: Mark Brown <broonie@kernel.org> Signed-off-by: Mark Brown <broonie@kernel.org>
This patch add a missing check on the return value of devm_kzalloc, which would cause a NULL pointer dereference in a OOM situation. Signed-off-by: Kiran Padwal <kiran.padwal@smartplayin.com> Acked-by: Peter Ujfalusi <peter.ujfalusi@ti.com> Signed-off-by: Mark Brown <broonie@kernel.org>
…ted ADSP The ADSP on Braswell/Baytrail is an ACPI device. This patch sets its initial runtime PM status to active. Otherwise, its initial status is suspended and runtime_suspend ops will not be called after probe and thus cannot further trigger ACPI _PS3 (D3) method to put the device into low power D3cold state. Signed-off-by: Mengdong Lin <mengdong.lin@intel.com> Signed-off-by: Mark Brown <broonie@kernel.org>
The dmi-sysfs should create "End of Table" entry, that is type 127. But after adding initial SMBIOS v3 support fc43026 ("dmi: add support for SMBIOS 3.0 64-bit entry point") the 127-0 entry is not handled any more, as result it's not created in dmi sysfs for instance. This is important because the size of whole DMI table must correspond to sum of all DMI entry sizes. So move the end-of-table check after it's handled by dmi_table. Reviewed-by: Ard Biesheuvel <ard@linaro.org> Signed-off-by: Ivan Khoronzhuk <ivan.khoronzhuk@linaro.org> Cc: <stable@vger.kernel.org> # v3.19 Signed-off-by: Matt Fleming <matt.fleming@intel.com>
We need to set left/right control for the speaker amp to get stereo output on speaker. Signed-off-by: Bard Liao <bardliao@realtek.com> Signed-off-by: Mark Brown <broonie@kernel.org>
A few sound drivers for the samsung platforms are missing dependencies on I2C or SPI, which can lead to build errors like codecs/rt5631.c:1737:1: warning: data definition has no type or storage class 31_i2c_driver); codecs/rt5631.c:1737:1: error: type defaults to 'int' in declaration of 'module_i2c_driver' [-Werror=implicit-int] codecs/rt5631.c:1737:1: warning: parameter names (without types) in function declaration codecs/rt5631.c:1726:26: warning: 'rt5631_i2c_driver' defined but not used [-Wunused-variable] I have gone through all the ones that did not already have an I2C dependency and added the ones that I found missing, namely arndale, odroid-x2, littlemill, bells and speyside and this patch adds all the dependencies. Signed-off-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Mark Brown <broonie@kernel.org>
The tlv320aic23 codec is selected by the ep93xx snapper platform, which are missing a dependency on I2C, and that can result in this build error, as found during randconfig builds: .../codecs/tlv320aic23-i2c.c: In function 'tlv320aic23_i2c_probe': .../codecs/tlv320aic23-i2c.c:27:2: error: implicit declaration of function 'i2c_check_functionality' [-Werror=implicit-function-declaration] if (!i2c_check_functionality(i2c->adapter, I2C_FUNC_SMBUS_BYTE_DATA)) ^ This adds the missing dependency. Signed-off-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Mark Brown <broonie@kernel.org>
Add missing header files to avoid implicit declarations and indirect inclusions. Signed-off-by: Kenneth Westfield <kwestfie@codeaurora.org> Signed-off-by: Mark Brown <broonie@kernel.org>
The updated firmware expects the MMX ID to be used as 3, so update the driver as well Signed-off-by: Vinod Koul <vinod.koul@intel.com> Signed-off-by: Mark Brown <broonie@kernel.org>
The IPC driver saved only IMR register, we need to save the CSR as well, so add it Signed-off-by: Vinod Koul <vinod.koul@intel.com> Signed-off-by: Mark Brown <broonie@kernel.org>
The manual recommends that we reset the DSP when we suspend so add that in runtime suspend handler Signed-off-by: Vinod Koul <vinod.koul@intel.com> Signed-off-by: Mark Brown <broonie@kernel.org>
Dan Carpenter's static checker pointed out: net/sunrpc/xprtrdma/rpc_rdma.c:879 rpcrdma_reply_handler() warn: can 'credits' be negative? "credits" is defined as an int. The credits value comes from the server as a 32-bit unsigned integer. A malicious or broken server can plant a large unsigned integer in that field which would result in an underflow in the following logic, potentially triggering a deadlock of the mount point by blocking the client from issuing more RPC requests. net/sunrpc/xprtrdma/rpc_rdma.c: 876 credits = be32_to_cpu(headerp->rm_credit); 877 if (credits == 0) 878 credits = 1; /* don't deadlock */ 879 else if (credits > r_xprt->rx_buf.rb_max_requests) 880 credits = r_xprt->rx_buf.rb_max_requests; 881 882 cwnd = xprt->cwnd; 883 xprt->cwnd = credits << RPC_CWNDSHIFT; 884 if (xprt->cwnd > cwnd) 885 xprt_release_rqst_cong(rqst->rq_task); Reported-by: Dan Carpenter <dan.carpenter@oracle.com> Fixes: eba8ff6 ("xprtrdma: Move credit update to RPC . . .") Signed-off-by: Chuck Lever <chuck.lever@oracle.com> Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
…na/nfs-rdma
NFS: RDMA Client Sparse Fix #2
This patch fixes another sparse fix found by Dan Carpenter's tool.
Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
* tag 'nfs-rdma-for-4.0-3' of git://git.linux-nfs.org/projects/anna/nfs-rdma:
xprtrdma: Store RDMA credits in unsigned variables
RT5670_IRQ_CTRL1(0xbd) is a non volatile register. And we need to restore its value after suspend/resume. Signed-off-by: Bard Liao <bardliao@realtek.com> Signed-off-by: Mark Brown <broonie@kernel.org> Cc: stable@vger.kernel.org
The STA32X_AUTO3 is a writable register that currently does not appear in the regmap ranges(neither read nor write). By adding this register to the register ranges there is no gap anymore and the existing register ranges can be joined. This fixes a regression introduced in commit a1be4ce where the driver was moved to direct regmap usage and the STA32X_AUTO3 register was missed. That made it impossible to choose the preset EQ mode set through the STA32X_AUTO3 register. Fixes: a1be4ce (ASoC: sta32x: Convert to direct regmap API usage) Signed-off-by: Thomas Niederprüm <niederp@physik.uni-kl.de> Signed-off-by: Mark Brown <broonie@kernel.org>
While adding support loading kernel and initrd above 4G to grub2 in legacy mode, I was referring to efi_high_alloc(). That will allocate buffer for kernel and then initrd, and initrd will use kernel buffer start as limit. During testing found two buffers will be overlapped when initrd size is very big like 400M. It turns out efi_high_alloc() boundary checking is not right. end - size will be the new start, and should not compare new start with max, we need to make sure end is smaller than max. [ Basically, with the current efi_high_alloc() code it's possible to allocate memory above 'max', because efi_high_alloc() doesn't check that the tail of the allocation is below 'max'. If you have an EFI memory map with a single entry that looks like so, [0xc0000000-0xc0004000] And want to allocate 0x3000 bytes below 0xc0003000 the current code will allocate [0xc0001000-0xc0004000], not [0xc0000000-0xc0003000] like you would expect. - Matt ] Signed-off-by: Yinghai Lu <yinghai@kernel.org> Reviewed-by: Ard Biesheuvel <ard.biesheuvel@linaro.org> Reviewed-by: Mark Rutland <mark.rutland@arm.com> Tested-by: Mark Rutland <mark.rutland@arm.com> Cc: <stable@vger.kernel.org> Signed-off-by: Matt Fleming <matt.fleming@intel.com>
According to SMBIOSv3 specification the length of DMI table can be up to 32bits wide. So use appropriate type to avoid overflow. It's obvious that dmi_num theoretically can be more than u16 also, so it's can be changed to u32 or at least it's better to use int instead of u16, but on that moment I cannot imagine dmi structure count more than 65535 and it can require changing type of vars that work with it. So I didn't correct it. Acked-by: Ard Biesheuvel <ard@linaro.org> Signed-off-by: Ivan Khoronzhuk <ivan.khoronzhuk@linaro.org> Cc: <stable@vger.kernel.org> Signed-off-by: Matt Fleming <matt.fleming@intel.com>
The patch 237fead: "[PATCH] ecryptfs: fs/Makefile and fs/Kconfig" from Oct 4, 2006, leads to the following static checker warning: fs/ecryptfs/crypto.c:846 ecryptfs_new_file_context() error: off-by-one overflow 'crypt_stat->cipher' size 32. rl = '0-32' There is a mismatch between the size of ecryptfs_crypt_stat.cipher and ecryptfs_mount_crypt_stat.global_default_cipher_name causing the copy of the cipher name to cause a off-by-one string copy error. This fix ensures the space reserved for this string is the same size including the trailing zero at the end throughout ecryptfs. This fix avoids increasing the size of ecryptfs_crypt_stat.cipher and also ecryptfs_parse_tag_70_packet_silly_stack.cipher_string and instead reduces the of ECRYPTFS_MAX_CIPHER_NAME_SIZE to 31 and includes the + 1 for the end of string terminator. NOTE: An overflow is not possible in practice since the value copied into global_default_cipher_name is validated by ecryptfs_code_for_cipher_string() at mount time. None of the allowed cipher strings are long enough to cause the potential buffer overflow fixed by this patch. Signed-off-by: Colin Ian King <colin.king@canonical.com> Reported-by: Dan Carpenter <dan.carpenter@oracle.com> [tyhicks: Added the NOTE about the overflow not being triggerable] Signed-off-by: Tyler Hicks <tyhicks@canonical.com>
The IRQF_NO_SUSPEND flag is intended to be used for interrupts required
to be enabled during the suspend-resume cycle. This mostly consists of
IPIs and timer interrupts, potentially including chained irqchip
interrupts if these are necessary to handle timers or IPIs. If an
interrupt does not fall into one of the aforementioned categories,
requesting it with IRQF_NO_SUSPEND is likely incorrect.
Using IRQF_NO_SUSPEND does not guarantee that the interrupt can wake the
system from a suspended state. For an interrupt to be able to trigger a
wakeup, it may be necessary to program various components of the system.
In these cases it is necessary to use {enable,disabled}_irq_wake.
Unfortunately, several drivers assume that IRQF_NO_SUSPEND ensures that
an IRQ can wake up the system, and the documentation can be read
ambiguously w.r.t. this property.
This patch updates the documentation regarding IRQF_NO_SUSPEND to make
this caveat explicit, hopefully making future misuse rarer. Cleanup of
existing misuse will occur as part of later patch series.
Signed-off-by: Mark Rutland <mark.rutland@arm.com>
Acked-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
The patch corrects the routing paths of that after IF1/2 DACx Mux Signed-off-by: Oder Chiou <oder_chiou@realtek.com> Signed-off-by: Mark Brown <broonie@kernel.org>
This patch fixes faulty behaviour in a setup where the input clock for the SRG is fed through the CLKR/CLKX pin but the McBSP is configured to be master (SND_SOC_DAIFMT_CBS_CFS). In that case of course CLKR/CLKX must not be configured as output pin. Otherwise the input clock is messed up horribly. This patch makes it possible to use the CLKR/CLKX pin rather than CLKS to inject a reference clock in setups where McBSP is master and not both rx and tx are used. However for this to work it has to be ensured that set_dai_sysclk() is called after set_dai_fmt(). This was tested on a beagleboard-xm using McBSP1 to drive a i2s DAC through the tx lines (CLKX,FSX,DX). Using this patch the CLKR pin is used to inject an external reference clock. Signed-off-by: Thomas Niederprüm <niederp@physik.uni-kl.de> Acked-by: Peter Ujfalusi <peter.ujfalusi@ti.com> Signed-off-by: Mark Brown <broonie@kernel.org>
The amdtp_stream_wait_callback() doesn't return minus value and the return code is not for error code. This commit fixes with a propper condition and an error code. Fixes: f3699e2 ('ALSA: oxfw: Change the way to start stream') Reported-by: Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by: Takashi Sakamoto <o-takashi@sakamocchi.jp> Cc: <stable@vger.kernel.org> # 3.19+ Signed-off-by: Takashi Iwai <tiwai@suse.de>
The share access mode is now specified as an argument in the nfs4_opendata, and so nfs4_open_recover_helper() needs to call nfs4_map_atomic_open_share() in order to set it. Fixes: 6ae3733 ("NFSv4.1: Ask for no delegation on OPEN if using O_DIRECT") Signed-off-by: Trond Myklebust <trond.myklebust@primarydata.com>
In Linux 4.0-rc1 ARM Versatile PCI build fails to build due to what appears to be an API update. This patch is a very simple correction, merely posted as a heads-up to the maintainers. Hopefully a better fix can be forwarded to Linus. [ arnd: the patch actually looks correct, so let's take this version ] Signed-off-by: Joachim Nilsson <troglobit@gmail.com> Signed-off-by: Arnd Bergmann <arnd@arndb.de> Acked-by: Linus Walleij <linus.walleij@linaro.org> Acked-by: Bjorn Helgaas <bhelgaas@google.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Disabling interrupts at the end of cpuidle_enter_freeze() is not useful, because its caller, cpuidle_idle_call(), re-enables them right away after invoking it. To avoid that unnecessary back and forth dance with interrupts, make cpuidle_enter_freeze() enable interrupts after calling enter_freeze_proper() and drop the local_irq_disable() at its end, so that all of the code paths in it end up with interrupts enabled. Then, cpuidle_idle_call() will not need to re-enable interrupts after calling cpuidle_enter_freeze() any more, because the latter will return with interrupts enabled, in analogy with cpuidle_enter(). Reported-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com> Acked-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Modify cpuidle_enter_freeze() to do the sanity checks done by cpuidle_select() to avoid crashing the suspend-to-idle code path in case something is missing. Fixes: 3810631 (PM / sleep: Re-implement suspend-to-idle handling) Original-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com> Acked-by: Peter Zijlstra (Intel) <peterz@infradead.org>
For received packet stream, the offset of 'RX_SEQ_START' locates after the offset of 'RX_NUMBER_MIDI', although current macro and proc output includes wrong offsets. Fortunately, this bug doesn't affect streaming functionality because these macro is not used. This commit fixes these wrong macro and outputs. Signed-off-by: Takashi Sakamoto <o-takashi@sakamocchi.jp> Signed-off-by: Takashi Iwai <tiwai@suse.de>
* pm-domains: PM / Domains: cleanup: rename gpd -> genpd in debugfs interface * pm-cpufreq: cpufreq: ppc: Add missing #include <asm/smp.h>
This got added with my dirty_bgs patch, it's not needed. Thanks, Signed-off-by: Josef Bacik <jbacik@fb.com> Signed-off-by: Chris Mason <clm@fb.com>
When using the fast file fsync code path we can miss the fact that new
writes happened since the last file fsync and therefore return without
waiting for the IO to finish and write the new extents to the fsync log.
Here's an example scenario where the fsync will miss the fact that new
file data exists that wasn't yet durably persisted:
1. fs_info->last_trans_committed == N - 1 and current transaction is
transaction N (fs_info->generation == N);
2. do a buffered write;
3. fsync our inode, this clears our inode's full sync flag, starts
an ordered extent and waits for it to complete - when it completes
at btrfs_finish_ordered_io(), the inode's last_trans is set to the
value N (via btrfs_update_inode_fallback -> btrfs_update_inode ->
btrfs_set_inode_last_trans);
4. transaction N is committed, so fs_info->last_trans_committed is now
set to the value N and fs_info->generation remains with the value N;
5. do another buffered write, when this happens btrfs_file_write_iter
sets our inode's last_trans to the value N + 1 (that is
fs_info->generation + 1 == N + 1);
6. transaction N + 1 is started and fs_info->generation now has the
value N + 1;
7. transaction N + 1 is committed, so fs_info->last_trans_committed
is set to the value N + 1;
8. fsync our inode - because it doesn't have the full sync flag set,
we only start the ordered extent, we don't wait for it to complete
(only in a later phase) therefore its last_trans field has the
value N + 1 set previously by btrfs_file_write_iter(), and so we
have:
inode->last_trans <= fs_info->last_trans_committed
(N + 1) (N + 1)
Which made us not log the last buffered write and exit the fsync
handler immediately, returning success (0) to user space and resulting
in data loss after a crash.
This can actually be triggered deterministically and the following excerpt
from a testcase I made for xfstests triggers the issue. It moves a dummy
file across directories and then fsyncs the old parent directory - this
is just to trigger a transaction commit, so moving files around isn't
directly related to the issue but it was chosen because running 'sync' for
example does more than just committing the current transaction, as it
flushes/waits for all file data to be persisted. The issue can also happen
at random periods, since the transaction kthread periodicaly commits the
current transaction (about every 30 seconds by default).
The body of the test is:
_scratch_mkfs >> $seqres.full 2>&1
_init_flakey
_mount_flakey
# Create our main test file 'foo', the one we check for data loss.
# By doing an fsync against our file, it makes btrfs clear the 'needs_full_sync'
# bit from its flags (btrfs inode specific flags).
$XFS_IO_PROG -f -c "pwrite -S 0xaa 0 8K" \
-c "fsync" $SCRATCH_MNT/foo | _filter_xfs_io
# Now create one other file and 2 directories. We will move this second file
# from one directory to the other later because it forces btrfs to commit its
# currently open transaction if we fsync the old parent directory. This is
# necessary to trigger the data loss bug that affected btrfs.
mkdir $SCRATCH_MNT/testdir_1
touch $SCRATCH_MNT/testdir_1/bar
mkdir $SCRATCH_MNT/testdir_2
# Make sure everything is durably persisted.
sync
# Write more 8Kb of data to our file.
$XFS_IO_PROG -c "pwrite -S 0xbb 8K 8K" $SCRATCH_MNT/foo | _filter_xfs_io
# Move our 'bar' file into a new directory.
mv $SCRATCH_MNT/testdir_1/bar $SCRATCH_MNT/testdir_2/bar
# Fsync our first directory. Because it had a file moved into some other
# directory, this made btrfs commit the currently open transaction. This is
# a condition necessary to trigger the data loss bug.
$XFS_IO_PROG -c "fsync" $SCRATCH_MNT/testdir_1
# Now fsync our main test file. If the fsync succeeds, we expect the 8Kb of
# data we wrote previously to be persisted and available if a crash happens.
# This did not happen with btrfs, because of the transaction commit that
# happened when we fsynced the parent directory.
$XFS_IO_PROG -c "fsync" $SCRATCH_MNT/foo
# Simulate a crash/power loss.
_load_flakey_table $FLAKEY_DROP_WRITES
_unmount_flakey
_load_flakey_table $FLAKEY_ALLOW_WRITES
_mount_flakey
# Now check that all data we wrote before are available.
echo "File content after log replay:"
od -t x1 $SCRATCH_MNT/foo
status=0
exit
The expected golden output for the test, which is what we get with this
fix applied (or when running against ext3/4 and xfs), is:
wrote 8192/8192 bytes at offset 0
XXX Bytes, X ops; XX:XX:XX.X (XXX YYY/sec and XXX ops/sec)
wrote 8192/8192 bytes at offset 8192
XXX Bytes, X ops; XX:XX:XX.X (XXX YYY/sec and XXX ops/sec)
File content after log replay:
0000000 aa aa aa aa aa aa aa aa aa aa aa aa aa aa aa aa
*
0020000 bb bb bb bb bb bb bb bb bb bb bb bb bb bb bb bb
*
0040000
Without this fix applied, the output shows the test file does not have
the second 8Kb extent that we successfully fsynced:
wrote 8192/8192 bytes at offset 0
XXX Bytes, X ops; XX:XX:XX.X (XXX YYY/sec and XXX ops/sec)
wrote 8192/8192 bytes at offset 8192
XXX Bytes, X ops; XX:XX:XX.X (XXX YYY/sec and XXX ops/sec)
File content after log replay:
0000000 aa aa aa aa aa aa aa aa aa aa aa aa aa aa aa aa
*
0020000
So fix this by skipping the fsync only if we're doing a full sync and
if the inode's last_trans is <= fs_info->last_trans_committed, or if
the inode is already in the log. Also remove setting the inode's
last_trans in btrfs_file_write_iter since it's useless/unreliable.
Also because btrfs_file_write_iter no longer sets inode->last_trans to
fs_info->generation + 1, don't set last_trans to 0 if we bail out and don't
bail out if last_trans is 0, otherwise something as simple as the following
example wouldn't log the second write on the last fsync:
1. write to file
2. fsync file
3. fsync file
|--> btrfs_inode_in_log() returns true and it set last_trans to 0
4. write to file
|--> btrfs_file_write_iter() no longers sets last_trans, so it
remained with a value of 0
5. fsync
|--> inode->last_trans == 0, so it bails out without logging the
second write
A test case for xfstests will be sent soon.
CC: <stable@vger.kernel.org>
Signed-off-by: Filipe Manana <fdmanana@suse.com>
Signed-off-by: Chris Mason <clm@fb.com>
…ended ref. Improper arithmetics when calculting the address of the extended ref could lead to an out of bounds memory read and kernel panic. Signed-off-by: Quentin Casasnovas <quentin.casasnovas@oracle.com> Reviewed-by: David Sterba <dsterba@suse.cz> cc: stable@vger.kernel.org # v3.7+ Signed-off-by: Chris Mason <clm@fb.com>
There is a missing lower bound check on "pitchbend" so it means we can read up to 6 elements before the start of the opl3_note_table[] array. Thanks to Clemens Ladisch for his help with this patch. Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by: Takashi Iwai <tiwai@suse.de>
Cc: <stable@vger.kernel.org> BugLink: https://bugs.launchpad.net/bugs/1428947 Signed-off-by: Hui Wang <hui.wang@canonical.com> Signed-off-by: Takashi Iwai <tiwai@suse.de>
…ernel/git/broonie/sound into for-linus ASoC: Fixes for v4.0 A few driver specific fixes here, none of them earth shattering in themselves, that have accumliated since the opening of the merge window.
…/linux-nfs
Pull NFS client bugfixes from Trond Myklebust:
"Highlights include:
- Fix a regression in the NFSv4 open state recovery code
- Fix a regression in the NFSv4 close code
- Fix regressions and side-effects of the loop-back mounted NFS fixes
in 3.18, that cause the NFS read() syscall to return EBUSY.
- Fix regressions around the readdirplus code and how it interacts
with the VFS lazy unmount changes that went into v3.18.
- Fix issues with out-of-order RPC call replies replacing updated
attributes with stale ones (particularly after a truncate()).
- Fix an underflow checking issue with RPC/RDMA credits
- Fix a number of issues with the NFSv4 delegation return/free code.
- Fix issues around stale NFSv4.1 leases when doing a mount"
* tag 'nfs-for-4.0-3' of git://git.linux-nfs.org/projects/trondmy/linux-nfs: (24 commits)
NFSv4.1: Clear the old state by our client id before establishing a new lease
NFSv4: Fix a race in NFSv4.1 server trunking discovery
NFS: Don't write enable new pages while an invalidation is proceeding
NFS: Fix a regression in the read() syscall
NFSv4: Ensure we skip delegations that are already being returned
NFSv4: Pin the superblock while we're returning the delegation
NFSv4: Ensure we honour NFS_DELEGATION_RETURNING in nfs_inode_set_delegation()
NFSv4: Ensure that we don't reap a delegation that is being returned
NFS: Fix stateid used for NFS v4 closes
NFSv4: Don't call put_rpccred() under the rcu_read_lock()
NFS: Don't require a filehandle to refresh the inode in nfs_prime_dcache()
NFSv3: Use the readdir fileid as the mounted-on-fileid
NFS: Don't invalidate a submounted dentry in nfs_prime_dcache()
NFSv4: Set a barrier in the update_changeattr() helper
NFS: Fix nfs_post_op_update_inode() to set an attribute barrier
NFS: Remove size hack in nfs_inode_attrs_need_update()
NFSv4: Add attribute update barriers to delegreturn and pNFS layoutcommit
NFS: Add attribute update barriers to NFS writebacks
NFS: Set an attribute barrier on all updates
NFS: Add attribute update barriers to nfs_setattr_update_inode()
...
Pull file locking fix from Jeff Layton: "Just a single patch to fix a memory leak that Daniel Wagner discovered while doing some testing with leases" * tag 'locks-v4.0-3' of git://git.samba.org/jlayton/linux: locks: fix fasync_struct memory leak in lease upgrade/downgrade handling
…nel/git/rafael/linux-pm
Pull power management and ACPI fixes from Rafael Wysocki:
"These are fixes for recent regressions (ACPI resources management,
suspend-to-idle), stable-candidate fixes (ACPI backlight), fixes
related to the wakeup IRQ management changes made in v3.18, other
fixes (suspend-to-idle, cpufreq ppc driver) and a couple of cleanups
(suspend-to-idle, generic power domains, ACPI backlight).
Specifics:
- Fix ACPI resources management problems introduced by the recent
rework of the code in question (Jiang Liu) and a build issue
introduced by those changes (Joachim Nilsson).
- Fix a recent suspend-to-idle regression on systems where entering
idle states causes local timers to stop, prevent suspend-to-idle
from crashing in restricted configurations (no cpuidle driver,
cpuidle disabled etc.) and clean up the idle loop somewhat while at
it (Rafael J Wysocki).
- Fix build problem in the cpufreq ppc driver (Geert Uytterhoeven).
- Allow the ACPI backlight driver module to be loaded if ACPI is
disabled which helps the i915 driver in those configurations
(stable-candidate) and change the code to help debug unusual use
cases (Chris Wilson).
- Wakeup IRQ management changes in v3.18 caused some drivers on the
at91 platform to trigger a warning from the IRQ core related to an
unexpected combination of interrupt action handler flags. However,
on at91 a timer IRQ is shared with some other devices (including
system wakeup ones) and that leads to the unusual combination of
flags in question.
To make it possible to avoid the warning introduce a new interrupt
action handler flag (which can be used by drivers to indicate the
special case to the core) and rework the problematic at91 drivers
to use it and work as expected during system suspend/resume. From
Boris Brezillon, Rafael J Wysocki and Mark Rutland.
- Clean up the generic power domains subsystem's debugfs interface
(Kevin Hilman)"
* tag 'pm+acpi-4.0-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm:
genirq / PM: describe IRQF_COND_SUSPEND
tty: serial: atmel: rework interrupt and wakeup handling
watchdog: at91sam9: request the irq with IRQF_NO_SUSPEND
cpuidle / sleep: Use broadcast timer for states that stop local timer
clk: at91: implement suspend/resume for the PMC irqchip
rtc: at91rm9200: rework wakeup and interrupt handling
rtc: at91sam9: rework wakeup and interrupt handling
PM / wakeup: export pm_system_wakeup symbol
genirq / PM: Add flag for shared NO_SUSPEND interrupt lines
ACPI / video: Propagate the error code for acpi_video_register
ACPI / video: Load the module even if ACPI is disabled
PM / Domains: cleanup: rename gpd -> genpd in debugfs interface
cpufreq: ppc: Add missing #include <asm/smp.h>
x86/PCI/ACPI: Relax ACPI resource descriptor checks to work around BIOS bugs
x86/PCI/ACPI: Ignore resources consumed by host bridge itself
cpuidle: Clean up fallback handling in cpuidle_idle_call()
cpuidle / sleep: Do sanity checks in cpuidle_enter_freeze() too
idle / sleep: Avoid excessive disabling and enabling interrupts
PCI: versatile: Update for list_for_each_entry() API change
genirq / PM: better describe IRQF_NO_SUSPEND semantics
…l/git/tiwai/sound Pull sound fixes from Takashi Iwai: "Here are a few more ASoC changes that have been gathered since rc1, but it's still fairly calm over all. The only largish LOC is found in atmel driver, and it's just a removal of broken non-DT stuff. The rest are all small driver-specific fixes, nothing to worry much" * tag 'sound-4.0-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound: (26 commits) ALSA: hda - One more Dell macine needs DELL1_MIC_NO_PRESENCE quirk ALSA: opl3: small array underflow ALSA: line6: Clamp values correctly ALSA: msnd: add some missing curly braces ASoC: omap-pcm: Correct dma mask ASoC: simple-card: Add a NULL pointer check in asoc_simple_card_dai_link_of ASoC: sam9g20_wm8731: drop machine_is_xxx ALSA: dice: fix wrong offsets for Dice interface ALSA: oxfw: fix a condition and return code in start_stream() ASoC: OMAP: mcbsp: Fix CLKX and CLKR pinmux when used as inputs ASoC: rt5677: Correct the routing paths of that after IF1/2 DACx Mux ASoC: sta32x: fix register range in regmap. ASoC: rt5670: Set RT5670_IRQ_CTRL1 non volatile ASoC: Intel: reset the DSP while suspending ASoC: Intel: save and restore the CSR register ASoC: Intel: update MMX ID to 3 ASoC: max98357a: Add missing header files ASoC: cirrus: tlv320aic23 needs I2C ASoC: Samsung: add missing I2C/SPI dependencies ASoC: rt5670: Fix the speaker mono output issue ...
…/evalenti/linux-soc-thermal
Pull thermal management fixes from Eduardo Valentin:
"Specifics:
- adding Lukasz as maintainer of samsung thermal driver.
- driver fixes: exynos and int430x.
- one fix in the exynos cpufreq driver related to cpu cooling (acked
by cpufreq maintainer).
- fix default sysfs attributes of cooling devices
Note: I am sending this pull on Rui's behalf while he fixes issues in his Linux box"
* 'fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/evalenti/linux-soc-thermal:
thermal: Make sysfs attributes of cooling devices default attributes
Thermal/int340x: Fix memleak for aux trip
MAINTAINERS: Add entry for SAMSUNG THERMAL DRIVER
cpufreq: exynos: Use simple approach to asses if cpu cooling can be used
thermal: exynos: Fix wrong control of power down detection mode for Exynos7
…/git/jikos/livepatching Pull livepatching fix from Jiri Kosina: "Fix an RCU unlock misplacement in live patching infrastructure, from Peter Zijlstra" * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jikos/livepatching: livepatch: fix RCU usage in klp_find_external_symbol()
…/git/mason/linux-btrfs Pull btrfs fixes from Chris Mason: "Outside of misc fixes, Filipe has a few fsync corners and we're pulling in one more of Josef's fixes from production use here" * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mason/linux-btrfs: Btrfs:__add_inode_ref: out of bounds memory read when looking for extended ref. Btrfs: fix data loss in the fast fsync path Btrfs: remove extra run_delayed_refs in update_cowonly_root Btrfs: incremental send, don't rename a directory too soon btrfs: fix lost return value due to variable shadowing Btrfs: do not ignore errors from btrfs_lookup_xattr in do_setxattr Btrfs: fix off-by-one logic error in btrfs_realloc_node Btrfs: add missing inode update when punching hole Btrfs: abort the transaction if we fail to update the free space cache inode Btrfs: fix fsync race leading to ordered extent memory leaks
dabrace
pushed a commit
that referenced
this pull request
Nov 2, 2015
the returned buffer of register_sysctl() is stored into net_header variable, but net_header is not used after, and compiler maybe optimise the variable out, and lead kmemleak reported the below warning comm "swapper/0", pid 1, jiffies 4294937448 (age 267.270s) hex dump (first 32 bytes): 90 38 8b 01 c0 ff ff ff 00 00 00 00 01 00 00 00 .8.............. 01 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................ backtrace: [<ffffffc00020f134>] create_object+0x10c/0x2a0 [<ffffffc00070ff44>] kmemleak_alloc+0x54/0xa0 [<ffffffc0001fe378>] __kmalloc+0x1f8/0x4f8 [<ffffffc00028e984>] __register_sysctl_table+0x64/0x5a0 [<ffffffc00028eef0>] register_sysctl+0x30/0x40 [<ffffffc00099c304>] net_sysctl_init+0x20/0x58 [<ffffffc000994dd8>] sock_init+0x10/0xb0 [<ffffffc0000842e0>] do_one_initcall+0x90/0x1b8 [<ffffffc000966bac>] kernel_init_freeable+0x218/0x2f0 [<ffffffc00070ed6c>] kernel_init+0x1c/0xe8 [<ffffffc000083bfc>] ret_from_fork+0xc/0x50 [<ffffffffffffffff>] 0xffffffffffffffff <<end check kmemleak>> Before fix, the objdump result on ARM64: 0000000000000000 <net_sysctl_init>: 0: a9be7bfd stp x29, x30, [sp,#-32]! 4: 90000001 adrp x1, 0 <net_sysctl_init> 8: 90000000 adrp x0, 0 <net_sysctl_init> c: 910003fd mov x29, sp 10: 91000021 add x1, x1, #0x0 14: 91000000 add x0, x0, #0x0 18: a90153f3 stp x19, x20, [sp,#16] 1c: 12800174 mov w20, #0xfffffff4 // #-12 20: 94000000 bl 0 <register_sysctl> 24: b4000120 cbz x0, 48 <net_sysctl_init+0x48> 28: 90000013 adrp x19, 0 <net_sysctl_init> 2c: 91000273 add x19, x19, #0x0 30: 9101a260 add x0, x19, #0x68 34: 94000000 bl 0 <register_pernet_subsys> 38: 2a0003f4 mov w20, w0 3c: 35000060 cbnz w0, 48 <net_sysctl_init+0x48> 40: aa1303e0 mov x0, x19 44: 94000000 bl 0 <register_sysctl_root> 48: 2a1403e0 mov w0, w20 4c: a94153f3 ldp x19, x20, [sp,#16] 50: a8c27bfd ldp x29, x30, [sp],#32 54: d65f03c0 ret After: 0000000000000000 <net_sysctl_init>: 0: a9bd7bfd stp x29, x30, [sp,#-48]! 4: 90000000 adrp x0, 0 <net_sysctl_init> 8: 910003fd mov x29, sp c: a90153f3 stp x19, x20, [sp,#16] 10: 90000013 adrp x19, 0 <net_sysctl_init> 14: 91000000 add x0, x0, #0x0 18: 91000273 add x19, x19, #0x0 1c: f90013f5 str x21, [sp,#32] 20: aa1303e1 mov x1, x19 24: 12800175 mov w21, #0xfffffff4 // #-12 28: 94000000 bl 0 <register_sysctl> 2c: f9002260 str x0, [x19,#64] 30: b40001a0 cbz x0, 64 <net_sysctl_init+0x64> 34: 90000014 adrp x20, 0 <net_sysctl_init> 38: 91000294 add x20, x20, #0x0 3c: 9101a280 add x0, x20, #0x68 40: 94000000 bl 0 <register_pernet_subsys> 44: 2a0003f5 mov w21, w0 48: 35000080 cbnz w0, 58 <net_sysctl_init+0x58> 4c: aa1403e0 mov x0, x20 50: 94000000 bl 0 <register_sysctl_root> 54: 14000004 b 64 <net_sysctl_init+0x64> 58: f9402260 ldr x0, [x19,#64] 5c: 94000000 bl 0 <unregister_sysctl_table> 60: f900227f str xzr, [x19,#64] 64: 2a1503e0 mov w0, w21 68: f94013f5 ldr x21, [sp,#32] 6c: a94153f3 ldp x19, x20, [sp,#16] 70: a8c37bfd ldp x29, x30, [sp],#48 74: d65f03c0 ret Add the possible error handle to free the net_header to remove the kmemleak warning Signed-off-by: Li RongQing <roy.qing.li@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
dabrace
pushed a commit
that referenced
this pull request
Jan 12, 2016
I get the splat below when modprobing/rmmoding EDAC drivers. It happens because bus->name is invalid after bus_unregister() has run. The Code: section below corresponds to: .loc 1 1108 0 movq 672(%rbx), %rax # mci_1(D)->bus, mci_1(D)->bus .loc 1 1109 0 popq %rbx # .loc 1 1108 0 movq (%rax), %rdi # _7->name, jmp kfree # and %rax has some funky stuff 2030203020312030 which looks a lot like something walked over it. Fix that by saving the name ptr before doing stuff to string it points to. general protection fault: 0000 [#1] SMP Modules linked in: ... CPU: 4 PID: 10318 Comm: modprobe Tainted: G I EN 3.12.51-11-default+ #48 Hardware name: HP ProLiant DL380 G7, BIOS P67 05/05/2011 task: ffff880311320280 ti: ffff88030da3e000 task.ti: ffff88030da3e000 RIP: 0010:[<ffffffffa019da92>] [<ffffffffa019da92>] edac_unregister_sysfs+0x22/0x30 [edac_core] RSP: 0018:ffff88030da3fe28 EFLAGS: 00010292 RAX: 2030203020312030 RBX: ffff880311b4e000 RCX: 000000000000095c RDX: 0000000000000001 RSI: ffff880327bb9600 RDI: 0000000000000286 RBP: ffff880311b4e750 R08: 0000000000000000 R09: ffffffff81296110 R10: 0000000000000400 R11: 0000000000000000 R12: ffff88030ba1ac68 R13: 0000000000000001 R14: 00000000011b02f0 R15: 0000000000000000 FS: 00007fc9bf8f5700(0000) GS:ffff8801a7c40000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 000000008005003b CR2: 0000000000403c90 CR3: 000000019ebdf000 CR4: 00000000000007e0 Stack: Call Trace: i7core_unregister_mci.isra.9 i7core_remove pci_device_remove __device_release_driver driver_detach bus_remove_driver pci_unregister_driver i7core_exit SyS_delete_module system_call_fastpath 0x7fc9bf426536 Code: 2e 0f 1f 84 00 00 00 00 00 66 66 66 66 90 53 48 89 fb e8 52 2a 1f e1 48 8b bb a0 02 00 00 e8 46 59 1f e1 48 8b 83 a0 02 00 00 5b <48> 8b 38 e9 26 9a fe e0 66 0f 1f 44 00 00 66 66 66 66 90 48 8b RIP [<ffffffffa019da92>] edac_unregister_sysfs+0x22/0x30 [edac_core] RSP <ffff88030da3fe28> Signed-off-by: Borislav Petkov <bp@suse.de> Cc: Mauro Carvalho Chehab <mchehab@osg.samsung.com> Cc: <stable@vger.kernel.org> # v3.6.. Fixes: 7a623c0 ("edac: rewrite the sysfs code to use struct device")
dabrace
pushed a commit
that referenced
this pull request
Feb 8, 2016
This driver registers for extcon events as part of its probe, but never unregisters them in case of error in the probe path. There were multiple issues noticed due to this missing error handling. One of them is random crashes if the regulators are not ready yet by the time probe is invoked. Ivan's previous attempt [1] to fix this issue, did not really address all the failure cases like regualtor/get_irq failures. [1] https://lkml.org/lkml/2015/9/7/62 Without this patch the kernel would carsh with log: ... Unable to handle kernel paging request at virtual address 17d78410 pgd = ffffffc001a5c000 [17d78410] *pgd=00000000b6806003, *pud=00000000b6806003, *pmd=0000000000000000 Internal error: Oops: 96000005 [#1] PREEMPT SMP Modules linked in: CPU: 0 PID: 6 Comm: kworker/u8:0 Not tainted 4.4.0+ #48 Hardware name: Qualcomm Technologies, Inc. APQ 8016 SBC (DT) Workqueue: deferwq deferred_probe_work_func task: ffffffc03686e900 ti: ffffffc0368b0000 task.ti: ffffffc0368b0000 PC is at raw_notifier_chain_register+0x1c/0x44 LR is at extcon_register_notifier+0x88/0xc8 pc : [<ffffffc0000da43c>] lr : [<ffffffc000606298>] pstate: 80000085 sp : ffffffc0368b3a70 x29: ffffffc0368b3a70 x28: ffffffc03680c310 x27: ffffffc035518000 x26: ffffffc035518000 x25: ffffffc03bfa20e0 x24: ffffffc035580a18 x23: 0000000000000000 x22: ffffffc035518458 x21: ffffffc0355e9a60 x20: ffffffc035518000 x19: 0000000000000000 x18: 0000000000000028 x17: 0000000000000003 x16: ffffffc0018153c8 x15: 0000000000000001 x14: ffffffc03686f0f8 x13: ffffffc03686f0f8 x12: 0000000000000003 x11: 0000000000000001 x10: 0000000000000001 x9 : ffffffc03686f0f8 x8 : 0000e3872014c1a1 x7 : 0000000000000028 x6 : 0000000000000000 x5 : 0000000000000001 x4 : 0000000000000000 x3 : 00000000354fb170 x2 : 0000000017d78400 x1 : ffffffc0355e9a60 x0 : ffffffc0354fb268 Fixes: 591fc11 ("usb: phy: msm: Use extcon framework for VBUS and ID detection") CC: Stable <stable@vger.kernel.org> Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org> Signed-off-by: Felipe Balbi <balbi@kernel.org>
dabrace
pushed a commit
that referenced
this pull request
Dec 13, 2016
This is a regex converted version from the original: https://lkml.org/lkml/2016/5/19/461 Add basic support to recognise AArch64 assembly. This allows perf to identify AArch64 instructions that branch to other parts within the same function, thereby properly annotating them. Rebased onto new cross-arch annotation bits: https://lkml.org/lkml/2016/11/25/546 Sample output: security_file_permission vmlinux 5.80 │ ← ret ▒ │70: ldr w0, [x21,#68] ▒ 4.44 │ ↓ tbnz d0 ▒ │ mov w0, #0x24 // #36 ▒ 1.37 │ ands w0, w22, w0 ▒ │ ↑ b.eq 60 ▒ 1.37 │ ↓ tbnz e4 ▒ │ mov w19, #0x20000 // #131072 ▒ 1.02 │ ↓ tbz ec ▒ │90:┌─→ldr x3, [x21,#24] ▒ 1.37 │ │ add x21, x21, #0x10 ▒ │ │ mov w2, w19 ▒ 1.02 │ │ mov x0, x21 ▒ │ │ mov x1, x3 ▒ 1.71 │ │ ldr x20, [x3,#48] ▒ │ │→ bl __fsnotify_parent ▒ 0.68 │ │↑ cbnz 60 ▒ │ │ mov x2, x21 ▒ 1.37 │ │ mov w1, w19 ▒ │ │ mov x0, x20 ▒ 0.68 │ │ mov w5, #0x0 // #0 ▒ │ │ mov x4, #0x0 // #0 ▒ 1.71 │ │ mov w3, #0x1 // #1 ▒ │ │→ bl fsnotify ▒ 1.37 │ │↑ b 60 ▒ │d0:│ mov w0, #0x0 // #0 ▒ │ │ ldp x19, x20, [sp,#16] ▒ │ │ ldp x21, x22, [sp,#32] ▒ │ │ ldp x29, x30, [sp],#48 ▒ │ │← ret ▒ │e4:│ mov w19, #0x10000 // #65536 ▒ │ └──b 90 ◆ │ec: brk #0x800 ▒ Press 'h' for help on key bindings Signed-off-by: Kim Phillips <kim.phillips@arm.com> Signed-off-by: Chris Ryder <chris.ryder@arm.com> Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com> Cc: Mark Rutland <mark.rutland@arm.com> Cc: Pawel Moll <pawel.moll@arm.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Will Deacon <will.deacon@arm.com> Link: http://lkml.kernel.org/r/20161130092344.012e18e3e623bea395162f95@arm.com Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
dabrace
pushed a commit
that referenced
this pull request
Dec 16, 2016
There is at least one Chelsio 10Gb card which uses VPD area to store some non-standard blocks (example below). However pci_vpd_size() returns the length of the first block only assuming that there can be only one VPD "End Tag". Since 4e1a635 ("vfio/pci: Use kernel VPD access functions"), VFIO blocks access beyond that offset, which prevents the guest "cxgb3" driver from probing the device. The host system does not have this problem as its driver accesses the config space directly without pci_read_vpd(). Add a quirk to override the VPD size to a bigger value. The maximum size is taken from EEPROMSIZE in drivers/net/ethernet/chelsio/cxgb3/common.h. We do not read the tag as the cxgb3 driver does as the driver supports writing to EEPROM/VPD and when it writes, it only checks for 8192 bytes boundary. The quirk is registered for all devices supported by the cxgb3 driver. This adds a quirk to the PCI layer (not to the cxgb3 driver) as the cxgb3 driver itself accesses VPD directly and the problem only exists with the vfio-pci driver (when cxgb3 is not running on the host and may not be even loaded) which blocks accesses beyond the first block of VPD data. However vfio-pci itself does not have quirks mechanism so we add it to PCI. This is the controller: Ethernet controller [0200]: Chelsio Communications Inc T310 10GbE Single Port Adapter [1425:0030] This is what I parsed from its VPD: === b'\x82*\x0010 Gigabit Ethernet-SR PCI Express Adapter\x90J\x00EC\x07D76809 FN\x0746K' 0000 Large item 42 bytes; name 0x2 Identifier String b'10 Gigabit Ethernet-SR PCI Express Adapter' 002d Large item 74 bytes; name 0x10 #00 [EC] len=7: b'D76809 ' #0a [FN] len=7: b'46K7897' #14 [PN] len=7: b'46K7897' #1e [MN] len=4: b'1037' #25 [FC] len=4: b'5769' #2c [SN] len=12: b'YL102035603V' #3b [NA] len=12: b'00145E992ED1' 007a Small item 1 bytes; name 0xf End Tag 0c00 Large item 16 bytes; name 0x2 Identifier String b'S310E-SR-X ' 0c13 Large item 234 bytes; name 0x10 #00 [PN] len=16: b'TBD ' #13 [EC] len=16: b'110107730D2 ' #26 [SN] len=16: b'97YL102035603V ' #39 [NA] len=12: b'00145E992ED1' #48 [V0] len=6: b'175000' #51 [V1] len=6: b'266666' #5a [V2] len=6: b'266666' #63 [V3] len=6: b'2000 ' #6c [V4] len=2: b'1 ' #71 [V5] len=6: b'c2 ' #7a [V6] len=6: b'0 ' #83 [V7] len=2: b'1 ' #88 [V8] len=2: b'0 ' #8d [V9] len=2: b'0 ' #92 [VA] len=2: b'0 ' #97 [RV] len=80: b's\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00'... 0d00 Large item 252 bytes; name 0x11 #00 [VC] len=16: b'122310_1222 dp ' #13 [VD] len=16: b'610-0001-00 H1\x00\x00' #26 [VE] len=16: b'122310_1353 fp ' #39 [VF] len=16: b'610-0001-00 H1\x00\x00' #4c [RW] len=173: b'\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00'... 0dff Small item 0 bytes; name 0xf End Tag 10f3 Large item 13315 bytes; name 0x62 !!! unknown item name 98: b'\xd0\x03\x00@`\x0c\x08\x00\x00\x00\x00\x00\x00\x00\x00\x00' === Signed-off-by: Alexey Kardashevskiy <aik@ozlabs.ru> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
dabrace
pushed a commit
that referenced
this pull request
Jun 27, 2017
Commit bf5eb3d ("slub: separate out sysfs_slab_release() from sysfs_slab_remove()") made slub sysfs file removals synchronous to kmem_cache shutdown. Unfortunately, this created a possible ABBA deadlock between slab_mutex and sysfs draining mechanism triggering the following lockdep warning. ====================================================== [ INFO: possible circular locking dependency detected ] 4.10.0-test+ #48 Not tainted ------------------------------------------------------- rmmod/1211 is trying to acquire lock: (s_active#120){++++.+}, at: [<ffffffff81308073>] kernfs_remove+0x23/0x40 but task is already holding lock: (slab_mutex){+.+.+.}, at: [<ffffffff8120f691>] kmem_cache_destroy+0x41/0x2d0 which lock already depends on the new lock. the existing dependency chain (in reverse order) is: -> #1 (slab_mutex){+.+.+.}: lock_acquire+0xf6/0x1f0 __mutex_lock+0x75/0x950 mutex_lock_nested+0x1b/0x20 slab_attr_store+0x75/0xd0 sysfs_kf_write+0x45/0x60 kernfs_fop_write+0x13c/0x1c0 __vfs_write+0x28/0x120 vfs_write+0xc8/0x1e0 SyS_write+0x49/0xa0 entry_SYSCALL_64_fastpath+0x1f/0xc2 -> #0 (s_active#120){++++.+}: __lock_acquire+0x10ed/0x1260 lock_acquire+0xf6/0x1f0 __kernfs_remove+0x254/0x320 kernfs_remove+0x23/0x40 sysfs_remove_dir+0x51/0x80 kobject_del+0x18/0x50 __kmem_cache_shutdown+0x3e6/0x460 kmem_cache_destroy+0x1fb/0x2d0 kvm_exit+0x2d/0x80 [kvm] vmx_exit+0x19/0xa1b [kvm_intel] SyS_delete_module+0x198/0x1f0 entry_SYSCALL_64_fastpath+0x1f/0xc2 other info that might help us debug this: Possible unsafe locking scenario: CPU0 CPU1 ---- ---- lock(slab_mutex); lock(s_active#120); lock(slab_mutex); lock(s_active#120); *** DEADLOCK *** 2 locks held by rmmod/1211: #0: (cpu_hotplug.dep_map){++++++}, at: [<ffffffff810a7877>] get_online_cpus+0x37/0x80 #1: (slab_mutex){+.+.+.}, at: [<ffffffff8120f691>] kmem_cache_destroy+0x41/0x2d0 stack backtrace: CPU: 3 PID: 1211 Comm: rmmod Not tainted 4.10.0-test+ #48 Hardware name: Hewlett-Packard HP Compaq Pro 6300 SFF/339A, BIOS K01 v02.05 05/07/2012 Call Trace: print_circular_bug+0x1be/0x210 __lock_acquire+0x10ed/0x1260 lock_acquire+0xf6/0x1f0 __kernfs_remove+0x254/0x320 kernfs_remove+0x23/0x40 sysfs_remove_dir+0x51/0x80 kobject_del+0x18/0x50 __kmem_cache_shutdown+0x3e6/0x460 kmem_cache_destroy+0x1fb/0x2d0 kvm_exit+0x2d/0x80 [kvm] vmx_exit+0x19/0xa1b [kvm_intel] SyS_delete_module+0x198/0x1f0 ? SyS_delete_module+0x5/0x1f0 entry_SYSCALL_64_fastpath+0x1f/0xc2 It'd be the cleanest to deal with the issue by removing sysfs files without holding slab_mutex before the rest of shutdown; however, given the current code structure, it is pretty difficult to do so. This patch punts sysfs file removal to a work item. Before commit bf5eb3d, the removal was punted to a RCU delayed work item which is executed after release. Now, we're punting to a different work item on shutdown which still maintains the goal removing the sysfs files earlier when destroying kmem_caches. Link: http://lkml.kernel.org/r/20170620204512.GI21326@htj.duckdns.org Fixes: bf5eb3d ("slub: separate out sysfs_slab_release() from sysfs_slab_remove()") Signed-off-by: Tejun Heo <tj@kernel.org> Reported-by: Steven Rostedt (VMware) <rostedt@goodmis.org> Tested-by: Steven Rostedt (VMware) <rostedt@goodmis.org> Cc: Christoph Lameter <cl@linux.com> Cc: Pekka Enberg <penberg@kernel.org> Cc: David Rientjes <rientjes@google.com> Cc: Joonsoo Kim <iamjoonsoo.kim@lge.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
dabrace
pushed a commit
that referenced
this pull request
Jul 26, 2018
The level of struct nft_ctx is updated by nf_tables_check_loops(). That
is used to validate jumpstack depth. But jumpstack validation routine
doesn't update and validate recursively. So, in some cases, chain depth
can be bigger than the NFT_JUMP_STACK_SIZE.
After this patch, The jumpstack validation routine is located in the
nft_chain_validate(). When new rules or new set elements are added, the
nft_table_validate() is called by the nf_tables_newrule and the
nf_tables_newsetelem. The nft_table_validate() calls the
nft_chain_validate() that visit all their children chains recursively.
So it can update depth of chain certainly.
Reproducer:
%cat ./test.sh
#!/bin/bash
nft add table ip filter
nft add chain ip filter input { type filter hook input priority 0\; }
for ((i=0;i<20;i++)); do
nft add chain ip filter a$i
done
nft add rule ip filter input jump a1
for ((i=0;i<10;i++)); do
nft add rule ip filter a$i jump a$((i+1))
done
for ((i=11;i<19;i++)); do
nft add rule ip filter a$i jump a$((i+1))
done
nft add rule ip filter a10 jump a11
Result:
[ 253.931782] WARNING: CPU: 1 PID: 0 at net/netfilter/nf_tables_core.c:186 nft_do_chain+0xacc/0xdf0 [nf_tables]
[ 253.931915] Modules linked in: nf_tables nfnetlink ip_tables x_tables
[ 253.932153] CPU: 1 PID: 0 Comm: swapper/1 Not tainted 4.18.0-rc3+ #48
[ 253.932153] RIP: 0010:nft_do_chain+0xacc/0xdf0 [nf_tables]
[ 253.932153] Code: 83 f8 fb 0f 84 c7 00 00 00 e9 d0 00 00 00 83 f8 fd 74 0e 83 f8 ff 0f 84 b4 00 00 00 e9 bd 00 00 00 83 bd 64 fd ff ff 0f 76 09 <0f> 0b 31 c0 e9 bc 02 00 00 44 8b ad 64 fd
[ 253.933807] RSP: 0018:ffff88011b807570 EFLAGS: 00010212
[ 253.933807] RAX: 00000000fffffffd RBX: ffff88011b807660 RCX: 0000000000000000
[ 253.933807] RDX: 0000000000000010 RSI: ffff880112b39d78 RDI: ffff88011b807670
[ 253.933807] RBP: ffff88011b807850 R08: ffffed0023700ece R09: ffffed0023700ecd
[ 253.933807] R10: ffff88011b80766f R11: ffffed0023700ece R12: ffff88011b807898
[ 253.933807] R13: ffff880112b39d80 R14: ffff880112b39d60 R15: dffffc0000000000
[ 253.933807] FS: 0000000000000000(0000) GS:ffff88011b800000(0000) knlGS:0000000000000000
[ 253.933807] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
[ 253.933807] CR2: 00000000014f1008 CR3: 000000006b216000 CR4: 00000000001006e0
[ 253.933807] Call Trace:
[ 253.933807] <IRQ>
[ 253.933807] ? sched_clock_cpu+0x132/0x170
[ 253.933807] ? __nft_trace_packet+0x180/0x180 [nf_tables]
[ 253.933807] ? sched_clock_cpu+0x132/0x170
[ 253.933807] ? debug_show_all_locks+0x290/0x290
[ 253.933807] ? __lock_acquire+0x4835/0x4af0
[ 253.933807] ? inet_ehash_locks_alloc+0x1a0/0x1a0
[ 253.933807] ? unwind_next_frame+0x159e/0x1840
[ 253.933807] ? __read_once_size_nocheck.constprop.4+0x5/0x10
[ 253.933807] ? nft_do_chain_ipv4+0x197/0x1e0 [nf_tables]
[ 253.933807] ? nft_do_chain+0x5/0xdf0 [nf_tables]
[ 253.933807] nft_do_chain_ipv4+0x197/0x1e0 [nf_tables]
[ 253.933807] ? nft_do_chain_arp+0xb0/0xb0 [nf_tables]
[ 253.933807] ? __lock_is_held+0x9d/0x130
[ 253.933807] nf_hook_slow+0xc4/0x150
[ 253.933807] ip_local_deliver+0x28b/0x380
[ 253.933807] ? ip_call_ra_chain+0x3e0/0x3e0
[ 253.933807] ? ip_rcv_finish+0x1610/0x1610
[ 253.933807] ip_rcv+0xbcc/0xcc0
[ 253.933807] ? debug_show_all_locks+0x290/0x290
[ 253.933807] ? ip_local_deliver+0x380/0x380
[ 253.933807] ? __lock_is_held+0x9d/0x130
[ 253.933807] ? ip_local_deliver+0x380/0x380
[ 253.933807] __netif_receive_skb_core+0x1c9c/0x2240
Signed-off-by: Taehee Yoo <ap420073@gmail.com>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
dabrace
pushed a commit
that referenced
this pull request
Jul 31, 2018
Dirk Gouders reported that two consecutive "make" invocations on an already compiled tree will show alternating behaviors: $ make CALL scripts/checksyscalls.sh DESCEND objtool CHK include/generated/compile.h DATAREL arch/x86/boot/compressed/vmlinux Kernel: arch/x86/boot/bzImage is ready (#48) Building modules, stage 2. MODPOST 165 modules $ make CALL scripts/checksyscalls.sh DESCEND objtool CHK include/generated/compile.h LD arch/x86/boot/compressed/vmlinux ZOFFSET arch/x86/boot/zoffset.h AS arch/x86/boot/header.o LD arch/x86/boot/setup.elf OBJCOPY arch/x86/boot/setup.bin OBJCOPY arch/x86/boot/vmlinux.bin BUILD arch/x86/boot/bzImage Setup is 15644 bytes (padded to 15872 bytes). System is 6663 kB CRC 3eb90f40 Kernel: arch/x86/boot/bzImage is ready (#48) Building modules, stage 2. MODPOST 165 modules He bisected it back to: commit 98f7852 ("x86/boot: Refuse to build with data relocations") The root cause was the use of the "if_changed" kbuild function multiple times for the same target. It was designed to only be used once per target, otherwise it will effectively always trigger, flipping back and forth between the two commands getting recorded by "if_changed". Instead, this patch merges the two commands into a single function to get stable build artifacts (i.e. .vmlinux.cmd), and a single build behavior. Bisected-and-Reported-by: Dirk Gouders <dirk@gouders.net> Fix-Suggested-by: Masahiro Yamada <yamada.masahiro@socionext.com> Signed-off-by: Kees Cook <keescook@chromium.org> Reviewed-by: Masahiro Yamada <yamada.masahiro@socionext.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Thomas Gleixner <tglx@linutronix.de> Link: http://lkml.kernel.org/r/20180724230827.GA37823@beast Signed-off-by: Ingo Molnar <mingo@kernel.org>
dabrace
pushed a commit
that referenced
this pull request
Nov 12, 2018
Increase kasan instrumented kernel stack size from 32k to 64k. Other architectures seems to get away with just doubling kernel stack size under kasan, but on s390 this appears to be not enough due to bigger frame size. The particular pain point is kasan inlined checks (CONFIG_KASAN_INLINE vs CONFIG_KASAN_OUTLINE). With inlined checks one particular case hitting stack overflow is fs sync on xfs filesystem: #0 [9a0681e8] 704 bytes check_usage at 34b1fc #1 [9a0684a8] 432 bytes check_usage at 34c710 #2 [9a068658] 1048 bytes validate_chain at 35044a #3 [9a068a70] 312 bytes __lock_acquire at 3559fe #4 [9a068ba8] 440 bytes lock_acquire at 3576ee #5 [9a068d60] 104 bytes _raw_spin_lock at 21b44e0 #6 [9a068dc8] 1992 bytes enqueue_entity at 2dbf72 #7 [9a069590] 1496 bytes enqueue_task_fair at 2df5f0 #8 [9a069b68] 64 bytes ttwu_do_activate at 28f438 #9 [9a069ba8] 552 bytes try_to_wake_up at 298c4c #10 [9a069dd0] 168 bytes wake_up_worker at 23f97c #11 [9a069e78] 200 bytes insert_work at 23fc2e #12 [9a069f40] 648 bytes __queue_work at 2487c0 #13 [9a06a1c8] 200 bytes __queue_delayed_work at 24db28 #14 [9a06a290] 248 bytes mod_delayed_work_on at 24de84 #15 [9a06a388] 24 bytes kblockd_mod_delayed_work_on at 153e2a0 #16 [9a06a3a0] 288 bytes __blk_mq_delay_run_hw_queue at 158168c #17 [9a06a4c0] 192 bytes blk_mq_run_hw_queue at 1581a3c #18 [9a06a580] 184 bytes blk_mq_sched_insert_requests at 15a2192 #19 [9a06a638] 1024 bytes blk_mq_flush_plug_list at 1590f3a #20 [9a06aa38] 704 bytes blk_flush_plug_list at 1555028 #21 [9a06acf8] 320 bytes schedule at 219e476 #22 [9a06ae38] 760 bytes schedule_timeout at 21b0aac #23 [9a06b130] 408 bytes wait_for_common at 21a1706 #24 [9a06b2c8] 360 bytes xfs_buf_iowait at fa1540 #25 [9a06b430] 256 bytes __xfs_buf_submit at fadae6 #26 [9a06b530] 264 bytes xfs_buf_read_map at fae3f6 #27 [9a06b638] 656 bytes xfs_trans_read_buf_map at 10ac9a8 #28 [9a06b8c8] 304 bytes xfs_btree_kill_root at e72426 #29 [9a06b9f8] 288 bytes xfs_btree_lookup_get_block at e7bc5e #30 [9a06bb18] 624 bytes xfs_btree_lookup at e7e1a6 #31 [9a06bd88] 2664 bytes xfs_alloc_ag_vextent_near at dfa070 #32 [9a06c7f0] 144 bytes xfs_alloc_ag_vextent at dff3ca #33 [9a06c880] 1128 bytes xfs_alloc_vextent at e05fce #34 [9a06cce8] 584 bytes xfs_bmap_btalloc at e58342 #35 [9a06cf30] 1336 bytes xfs_bmapi_write at e618de #36 [9a06d468] 776 bytes xfs_iomap_write_allocate at ff678e #37 [9a06d770] 720 bytes xfs_map_blocks at f82af8 #38 [9a06da40] 928 bytes xfs_writepage_map at f83cd6 #39 [9a06dde0] 320 bytes xfs_do_writepage at f85872 #40 [9a06df20] 1320 bytes write_cache_pages at 73dfe8 #41 [9a06e448] 208 bytes xfs_vm_writepages at f7f892 #42 [9a06e518] 88 bytes do_writepages at 73fe6a #43 [9a06e570] 872 bytes __writeback_single_inode at a20cb6 #44 [9a06e8d8] 664 bytes writeback_sb_inodes at a23be2 #45 [9a06eb70] 296 bytes __writeback_inodes_wb at a242e0 #46 [9a06ec98] 928 bytes wb_writeback at a2500e #47 [9a06f038] 848 bytes wb_do_writeback at a260ae #48 [9a06f388] 536 bytes wb_workfn at a28228 #49 [9a06f5a0] 1088 bytes process_one_work at 24a234 #50 [9a06f9e0] 1120 bytes worker_thread at 24ba26 #51 [9a06fe40] 104 bytes kthread at 26545a #52 [9a06fea8] kernel_thread_starter at 21b6b62 To be able to increase the stack size to 64k reuse LLILL instruction in __switch_to function to load 64k - STACK_FRAME_OVERHEAD - __PT_SIZE (65192) value as unsigned. Reported-by: Benjamin Block <bblock@linux.ibm.com> Reviewed-by: Heiko Carstens <heiko.carstens@de.ibm.com> Signed-off-by: Vasily Gorbik <gor@linux.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
dabrace
pushed a commit
that referenced
this pull request
Nov 26, 2018
After commit 3c83dd5 ("wlcore: Add support for optional wakeirq") landed upstream, I started seeing the following oops on my HiKey board: [ 1.870279] Unable to handle kernel read from unreadable memory at virtual address 0000000000000010 [ 1.870283] Mem abort info: [ 1.870287] ESR = 0x96000005 [ 1.870292] Exception class = DABT (current EL), IL = 32 bits [ 1.870296] SET = 0, FnV = 0 [ 1.870299] EA = 0, S1PTW = 0 [ 1.870302] Data abort info: [ 1.870306] ISV = 0, ISS = 0x00000005 [ 1.870309] CM = 0, WnR = 0 [ 1.870312] [0000000000000010] user address but active_mm is swapper [ 1.870318] Internal error: Oops: 96000005 [#1] PREEMPT SMP [ 1.870327] CPU: 0 PID: 5 Comm: kworker/0:0 Not tainted 4.19.0-05129-gb3d1e8e #48 [ 1.870331] Hardware name: HiKey Development Board (DT) [ 1.870350] Workqueue: events_freezable mmc_rescan [ 1.870358] pstate: 60400005 (nZCv daif +PAN -UAO) [ 1.870366] pc : wl1271_probe+0x210/0x350 [ 1.870371] lr : wl1271_probe+0x210/0x350 [ 1.870374] sp : ffffff80080739b0 [ 1.870377] x29: ffffff80080739b0 x28: 0000000000000000 [ 1.870384] x27: 0000000000000000 x26: 0000000000000000 [ 1.870391] x25: 0000000000000036 x24: ffffffc074ecb598 [ 1.870398] x23: ffffffc07ffdce78 x22: ffffffc0744ed808 [ 1.870404] x21: ffffffc074ecbb98 x20: ffffff8008ff9000 [ 1.870411] x19: ffffffc0744ed800 x18: ffffff8008ff9a48 [ 1.870418] x17: 0000000000000000 x16: 0000000000000000 [ 1.870425] x15: ffffffc074ecb503 x14: ffffffffffffffff [ 1.870431] x13: ffffffc074ecb502 x12: 0000000000000030 [ 1.870438] x11: 0101010101010101 x10: 0000000000000040 [ 1.870444] x9 : ffffffc075400248 x8 : ffffffc075400270 [ 1.870451] x7 : 0000000000000000 x6 : 0000000000000000 [ 1.870457] x5 : 0000000000000000 x4 : 0000000000000000 [ 1.870463] x3 : 0000000000000000 x2 : 0000000000000000 [ 1.870469] x1 : 0000000000000028 x0 : 0000000000000000 [ 1.870477] Process kworker/0:0 (pid: 5, stack limit = 0x(____ptrval____)) [ 1.870480] Call trace: [ 1.870485] wl1271_probe+0x210/0x350 [ 1.870491] sdio_bus_probe+0x100/0x128 [ 1.870500] really_probe+0x1a8/0x2b8 [ 1.870506] driver_probe_device+0x58/0x100 [ 1.870511] __device_attach_driver+0x94/0xd8 [ 1.870517] bus_for_each_drv+0x70/0xc8 [ 1.870522] __device_attach+0xe0/0x140 [ 1.870527] device_initial_probe+0x10/0x18 [ 1.870532] bus_probe_device+0x94/0xa0 [ 1.870537] device_add+0x374/0x5b8 [ 1.870542] sdio_add_func+0x60/0x88 [ 1.870546] mmc_attach_sdio+0x1b0/0x358 [ 1.870551] mmc_rescan+0x2cc/0x390 [ 1.870558] process_one_work+0x12c/0x320 [ 1.870563] worker_thread+0x48/0x458 [ 1.870569] kthread+0xf8/0x128 [ 1.870575] ret_from_fork+0x10/0x18 [ 1.870583] Code: 92400c21 b2760021 a90687a2 97e95bf9 (f9400803) [ 1.870587] ---[ end trace 1e15f81d3c139ca9 ]--- It seems since we don't have a wakeirq value in the dts, the wakeirq value in wl1271_probe() is zero, which then causes trouble in irqd_get_trigger_type(irq_get_irq_data(wakeirq)). This patch tries to address this by checking if wakeirq is zero, and not trying to add it to the resources if that is the case. Fixes: 3c83dd5 ("wlcore: Add support for optional wakeirq") Cc: Tony Lindgren <tony@atomide.com> Cc: Kalle Valo <kvalo@codeaurora.org> Cc: Eyal Reizer <eyalr@ti.com> Cc: Anders Roxell <anders.roxell@linaro.org> Cc: linux-wireless@vger.kernel.org Acked-by: Tony Lindgren <tony@atomide.com> Signed-off-by: John Stultz <john.stultz@linaro.org> Tested-by: Anders Roxell <anders.roxell@linaro.org> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
dabrace
pushed a commit
that referenced
this pull request
Aug 12, 2019
After commit ddde3c1 ("vt: More locking checks") kdb / kgdb has become useless because my console is filled with spews of: WARNING: CPU: 0 PID: 0 at .../drivers/tty/vt/vt.c:3846 con_is_visible+0x50/0x74 CPU: 0 PID: 0 Comm: swapper/0 Not tainted 5.3.0-rc1+ #48 Hardware name: Rockchip (Device Tree) Backtrace: [<c020ce9c>] (dump_backtrace) from [<c020d188>] (show_stack+0x20/0x24) [<c020d168>] (show_stack) from [<c0a8fc14>] (dump_stack+0xb0/0xd0) [<c0a8fb64>] (dump_stack) from [<c0232c58>] (__warn+0xec/0x11c) [<c0232b6c>] (__warn) from [<c0232dc4>] (warn_slowpath_null+0x4c/0x58) [<c0232d78>] (warn_slowpath_null) from [<c06338a0>] (con_is_visible+0x50/0x74) [<c0633850>] (con_is_visible) from [<c0634078>] (con_scroll+0x108/0x1ac) [<c0633f70>] (con_scroll) from [<c0634160>] (lf+0x44/0x88) [<c063411c>] (lf) from [<c06363ec>] (vt_console_print+0x1a4/0x2bc) [<c0636248>] (vt_console_print) from [<c02f628c>] (vkdb_printf+0x420/0x8a4) [<c02f5e6c>] (vkdb_printf) from [<c02f6754>] (kdb_printf+0x44/0x60) [<c02f6714>] (kdb_printf) from [<c02fa6f4>] (kdb_main_loop+0xf4/0x6e0) [<c02fa600>] (kdb_main_loop) from [<c02fd5f0>] (kdb_stub+0x268/0x398) [<c02fd388>] (kdb_stub) from [<c02f3ba0>] (kgdb_cpu_enter+0x1f8/0x674) [<c02f39a8>] (kgdb_cpu_enter) from [<c02f4330>] (kgdb_handle_exception+0x1c4/0x1fc) [<c02f416c>] (kgdb_handle_exception) from [<c0210fe0>] (kgdb_compiled_brk_fn+0x30/0x3c) [<c0210fb0>] (kgdb_compiled_brk_fn) from [<c020d7ac>] (do_undefinstr+0x180/0x1a0) [<c020d62c>] (do_undefinstr) from [<c0201b44>] (__und_svc_finish+0x0/0x3c) ... [<c02f3224>] (kgdb_breakpoint) from [<c02f3310>] (sysrq_handle_dbg+0x58/0x6c) [<c02f32b8>] (sysrq_handle_dbg) from [<c062abf0>] (__handle_sysrq+0xac/0x154) Let's disable this warning when we're in kgdb to avoid the spew. The whole system is stopped when we're in kgdb so we can't exactly wait for someone else to drop the lock. Presumably the best we can do is to disable the warning and hope for the best. Fixes: ddde3c1 ("vt: More locking checks") Cc: Daniel Vetter <daniel.vetter@intel.com> Signed-off-by: Douglas Anderson <dianders@chromium.org> Link: https://lore.kernel.org/r/20190725183551.169208-1-dianders@chromium.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
dabrace
pushed a commit
that referenced
this pull request
May 7, 2020
…f fs_info::journal_info [BUG] One run of btrfs/063 triggered the following lockdep warning: ============================================ WARNING: possible recursive locking detected 5.6.0-rc7-custom+ #48 Not tainted -------------------------------------------- kworker/u24:0/7 is trying to acquire lock: ffff88817d3a46e0 (sb_internal#2){.+.+}, at: start_transaction+0x66c/0x890 [btrfs] but task is already holding lock: ffff88817d3a46e0 (sb_internal#2){.+.+}, at: start_transaction+0x66c/0x890 [btrfs] other info that might help us debug this: Possible unsafe locking scenario: CPU0 ---- lock(sb_internal#2); lock(sb_internal#2); *** DEADLOCK *** May be due to missing lock nesting notation 4 locks held by kworker/u24:0/7: #0: ffff88817b495948 ((wq_completion)btrfs-endio-write){+.+.}, at: process_one_work+0x557/0xb80 #1: ffff888189ea7db8 ((work_completion)(&work->normal_work)){+.+.}, at: process_one_work+0x557/0xb80 #2: ffff88817d3a46e0 (sb_internal#2){.+.+}, at: start_transaction+0x66c/0x890 [btrfs] #3: ffff888174ca4da8 (&fs_info->reloc_mutex){+.+.}, at: btrfs_record_root_in_trans+0x83/0xd0 [btrfs] stack backtrace: CPU: 0 PID: 7 Comm: kworker/u24:0 Not tainted 5.6.0-rc7-custom+ #48 Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS 0.0.0 02/06/2015 Workqueue: btrfs-endio-write btrfs_work_helper [btrfs] Call Trace: dump_stack+0xc2/0x11a __lock_acquire.cold+0xce/0x214 lock_acquire+0xe6/0x210 __sb_start_write+0x14e/0x290 start_transaction+0x66c/0x890 [btrfs] btrfs_join_transaction+0x1d/0x20 [btrfs] find_free_extent+0x1504/0x1a50 [btrfs] btrfs_reserve_extent+0xd5/0x1f0 [btrfs] btrfs_alloc_tree_block+0x1ac/0x570 [btrfs] btrfs_copy_root+0x213/0x580 [btrfs] create_reloc_root+0x3bd/0x470 [btrfs] btrfs_init_reloc_root+0x2d2/0x310 [btrfs] record_root_in_trans+0x191/0x1d0 [btrfs] btrfs_record_root_in_trans+0x90/0xd0 [btrfs] start_transaction+0x16e/0x890 [btrfs] btrfs_join_transaction+0x1d/0x20 [btrfs] btrfs_finish_ordered_io+0x55d/0xcd0 [btrfs] finish_ordered_fn+0x15/0x20 [btrfs] btrfs_work_helper+0x116/0x9a0 [btrfs] process_one_work+0x632/0xb80 worker_thread+0x80/0x690 kthread+0x1a3/0x1f0 ret_from_fork+0x27/0x50 It's pretty hard to reproduce, only one hit so far. [CAUSE] This is because we're calling btrfs_join_transaction() without re-using the current running one: btrfs_finish_ordered_io() |- btrfs_join_transaction() <<< Call #1 |- btrfs_record_root_in_trans() |- btrfs_reserve_extent() |- btrfs_join_transaction() <<< Call #2 Normally such btrfs_join_transaction() call should re-use the existing one, without trying to re-start a transaction. But the problem is, in btrfs_join_transaction() call #1, we call btrfs_record_root_in_trans() before initializing current::journal_info. And in btrfs_join_transaction() call #2, we're relying on current::journal_info to avoid such deadlock. [FIX] Call btrfs_record_root_in_trans() after we have initialized current::journal_info. CC: stable@vger.kernel.org # 4.4+ Signed-off-by: Qu Wenruo <wqu@suse.com> Reviewed-by: David Sterba <dsterba@suse.com> Signed-off-by: David Sterba <dsterba@suse.com>
dabrace
pushed a commit
that referenced
this pull request
Jul 27, 2020
I got null-ptr-deref in serial8250_start_tx(): [ 78.114630] Unable to handle kernel NULL pointer dereference at virtual address 0000000000000000 [ 78.123778] Mem abort info: [ 78.126560] ESR = 0x86000007 [ 78.129603] EC = 0x21: IABT (current EL), IL = 32 bits [ 78.134891] SET = 0, FnV = 0 [ 78.137933] EA = 0, S1PTW = 0 [ 78.141064] user pgtable: 64k pages, 48-bit VAs, pgdp=00000027d41a8600 [ 78.147562] [0000000000000000] pgd=00000027893f0003, p4d=00000027893f0003, pud=00000027893f0003, pmd=00000027c9a20003, pte=0000000000000000 [ 78.160029] Internal error: Oops: 86000007 [#1] SMP [ 78.164886] Modules linked in: sunrpc vfat fat aes_ce_blk crypto_simd cryptd aes_ce_cipher crct10dif_ce ghash_ce sha2_ce sha256_arm64 sha1_ce ses enclosure sg sbsa_gwdt ipmi_ssif spi_dw_mmio sch_fq_codel vhost_net tun vhost vhost_iotlb tap ip_tables ext4 mbcache jbd2 ahci hisi_sas_v3_hw libahci hisi_sas_main libsas hns3 scsi_transport_sas hclge libata megaraid_sas ipmi_si hnae3 ipmi_devintf ipmi_msghandler br_netfilter bridge stp llc nvme nvme_core xt_sctp sctp libcrc32c dm_mod nbd [ 78.207383] CPU: 11 PID: 23258 Comm: null-ptr Not tainted 5.8.0-rc6+ #48 [ 78.214056] Hardware name: Huawei TaiShan 2280 V2/BC82AMDC, BIOS 2280-V2 CS V3.B210.01 03/12/2020 [ 78.222888] pstate: 80400089 (Nzcv daIf +PAN -UAO BTYPE=--) [ 78.228435] pc : 0x0 [ 78.230618] lr : serial8250_start_tx+0x160/0x260 [ 78.235215] sp : ffff800062eefb80 [ 78.238517] x29: ffff800062eefb80 x28: 0000000000000fff [ 78.243807] x27: ffff800062eefd80 x26: ffff202fd83b3000 [ 78.249098] x25: ffff800062eefd80 x24: ffff202fd83b3000 [ 78.254388] x23: ffff002fc5e50be8 x22: 0000000000000002 [ 78.259679] x21: 0000000000000001 x20: 0000000000000000 [ 78.264969] x19: ffffa688827eecc8 x18: 0000000000000000 [ 78.270259] x17: 0000000000000000 x16: 0000000000000000 [ 78.275550] x15: ffffa68881bc67a8 x14: 00000000000002e6 [ 78.280841] x13: ffffa68881bc67a8 x12: 000000000000c539 [ 78.286131] x11: d37a6f4de9bd37a7 x10: ffffa68881cccff0 [ 78.291421] x9 : ffffa68881bc6000 x8 : ffffa688819daa88 [ 78.296711] x7 : ffffa688822a0f20 x6 : ffffa688819e0000 [ 78.302002] x5 : ffff800062eef9d0 x4 : ffffa68881e707a8 [ 78.307292] x3 : 0000000000000000 x2 : 0000000000000002 [ 78.312582] x1 : 0000000000000001 x0 : ffffa688827eecc8 [ 78.317873] Call trace: [ 78.320312] 0x0 [ 78.322147] __uart_start.isra.9+0x64/0x78 [ 78.326229] uart_start+0xb8/0x1c8 [ 78.329620] uart_flush_chars+0x24/0x30 [ 78.333442] n_tty_receive_buf_common+0x7b0/0xc30 [ 78.338128] n_tty_receive_buf+0x44/0x2c8 [ 78.342122] tty_ioctl+0x348/0x11f8 [ 78.345599] ksys_ioctl+0xd8/0xf8 [ 78.348903] __arm64_sys_ioctl+0x2c/0xc8 [ 78.352812] el0_svc_common.constprop.2+0x88/0x1b0 [ 78.357583] do_el0_svc+0x44/0xd0 [ 78.360887] el0_sync_handler+0x14c/0x1d0 [ 78.364880] el0_sync+0x140/0x180 [ 78.368185] Code: bad PC value SERIAL_PORT_DFNS is not defined on each arch, if it's not defined, serial8250_set_defaults() won't be called in serial8250_isa_init_ports(), so the p->serial_in pointer won't be initialized, and it leads a null-ptr-deref. Fix this problem by calling serial8250_set_defaults() after init uart port. Signed-off-by: Yang Yingliang <yangyingliang@huawei.com> Cc: stable <stable@vger.kernel.org> Link: https://lore.kernel.org/r/20200721143852.4058352-1-yangyingliang@huawei.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
dabrace
pushed a commit
that referenced
this pull request
May 6, 2021
Ritesh reported a bug [1] against UML, noting that it crashed on startup. The backtrace shows the following (heavily redacted): (gdb) bt ... #26 0x0000000060015b5d in sem_init () at ipc/sem.c:268 #27 0x00007f89906d92f7 in ?? () from /lib/x86_64-linux-gnu/libcom_err.so.2 #28 0x00007f8990ab8fb2 in call_init (...) at dl-init.c:72 ... #40 0x00007f89909bf3a6 in nss_load_library (...) at nsswitch.c:359 ... #44 0x00007f8990895e35 in _nss_compat_getgrnam_r (...) at nss_compat/compat-grp.c:486 #45 0x00007f8990968b85 in __getgrnam_r [...] #46 0x00007f89909d6b77 in grantpt [...] #47 0x00007f8990a9394e in __GI_openpty [...] #48 0x00000000604a1f65 in openpty_cb (...) at arch/um/os-Linux/sigio.c:407 #49 0x00000000604a58d0 in start_idle_thread (...) at arch/um/os-Linux/skas/process.c:598 #50 0x0000000060004a3d in start_uml () at arch/um/kernel/skas/process.c:45 #51 0x00000000600047b2 in linux_main (...) at arch/um/kernel/um_arch.c:334 #52 0x000000006000574f in main (...) at arch/um/os-Linux/main.c:144 indicating that the UML function openpty_cb() calls openpty(), which internally calls __getgrnam_r(), which causes the nsswitch machinery to get started. This loads, through lots of indirection that I snipped, the libcom_err.so.2 library, which (in an unknown function, "??") calls sem_init(). Now, of course it wants to get libpthread's sem_init(), since it's linked against libpthread. However, the dynamic linker looks up that symbol against the binary first, and gets the kernel's sem_init(). Hajime Tazaki noted that "objcopy -L" can localize a symbol, so the dynamic linker wouldn't do the lookup this way. I tried, but for some reason that didn't seem to work. Doing the same thing in the linker script instead does seem to work, though I cannot entirely explain - it *also* works if I just add "VERSION { { global: *; }; }" instead, indicating that something else is happening that I don't really understand. It may be that explicitly doing that marks them with some kind of empty version, and that's different from the default. Explicitly marking them with a version breaks kallsyms, so that doesn't seem to be possible. Marking all the symbols as local seems correct, and does seem to address the issue, so do that. Also do it for static link, nsswitch libraries could still be loaded there. [1] https://bugs.debian.org/983379 Reported-by: Ritesh Raj Sarraf <rrs@debian.org> Signed-off-by: Johannes Berg <johannes.berg@intel.com> Acked-By: Anton Ivanov <anton.ivanov@cambridgegreys.com> Tested-By: Ritesh Raj Sarraf <rrs@debian.org> Signed-off-by: Richard Weinberger <richard@nod.at>
Sign up for free
to join this conversation on GitHub.
Already have an account?
Sign in to comment
Add this suggestion to a batch that can be applied as a single commit.
This suggestion is invalid because no changes were made to the code.
Suggestions cannot be applied while the pull request is closed.
Suggestions cannot be applied while viewing a subset of changes.
Only one suggestion per line can be applied in a batch.
Add this suggestion to a batch that can be applied as a single commit.
Applying suggestions on deleted lines is not supported.
You must change the existing code in this line in order to create a valid suggestion.
Outdated suggestions cannot be applied.
This suggestion has been applied or marked resolved.
Suggestions cannot be applied from pending reviews.
Suggestions cannot be applied on multi-line comments.
Suggestions cannot be applied while the pull request is queued to merge.
Suggestion cannot be applied right now. Please check back later.
No description provided.